8868 SPECIAL REPAIRS TO BLDG NO P-192 (MES IB) IN KALINA MILITARY CAMP UNDER GE NORTH MUMBAI

Amount

B/R WORKS Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish out side MD land complete all as specified and as directed by Engineer-in-Charge.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge

Demolition of plain cement concrete as in roof padding concrete of thickness not exceeding 15cm and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge

Taking down shutters not exceeding 1.5 sqm each including all fittings & removing clear off site after credit for the same is recovered by dept complete all as specified and as directed by Engineer-in-Charge

Taking down chowkats or frame with shutters, exceeding 1.5 sqm but not exceeding 4.00 sqm each (without taking off shutters from the frames) including all fittings & removing clear off site after credit for the same is recovered by dept complete all as specified and as directed by Engineer-in-Charge

Taking down chowkats or frame with shutters, not exceeding 1.5 sqm each (without taking off shutters from the frames) including all fittings & removing clear off site after credit for the same is recovered by dept complete all as specified and as directed by Engineer-in-Charge

Material and labour for 15mm thick rendering in two coats (10mm + 5mm) with cement mortar 1:4 on fair faces of brick or concrete surfaces, water proofing compound shall be mixed at the rate of 3% by weight of cement in finishing coat of 5mm thick, finished even and smooth without using extra cement etc, complete all as specified and as directed by Engineer-in-Charge Note: WPC will be measured and paid separately.

Material and labour for 10mm thick rendering in cement mortar 1:6 on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement etc, complete all as specified and as directed by Engineer-in-Charge

Supply only water proofing compound, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Scot No 1 /Parmo/Sepcil/Chemseal

Material and labour for plain solid straight chowkats, second class hardwood, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints including making good frame in cement concrete complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 40mm thick factory made flush shutter, solid core construction with particle board core and plywood face panels, commercial type covered with decorative face veneered on both side with lipping / frame to match all as specified and as directed. Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pdts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA)

Supply and fix 35mm thick factory made 2nd class hard wood glazed and skeleton shutter, open rebated, prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutter as specified in SSR Part-I section 8, clause No 8.24 (a) complete all as specified and as directed by Engineer-in-Charge. Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pdts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA)

All as per item No 13 described here-in-before but 30mm thick shutter

Supply and fix mild steel work as in hold fast & similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed by Engineer-in-Charge.

Supply and fix butt hinges of size 100mm, cast brass with mild steel hinge pin, bright polished, type B-11 all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix butt hinges of size 75mm, cast brass with mild steel hinge pin, bright polished, type B-11 all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix Brass barrel tower bolts 150mm long with cast or sheet barrel and rolled or cast bolts all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix Brass barrel tower bolts 100mm long with cast or sheet barrel and rolled or cast bolts all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix Extruded brass handles 150mm long, fabricated type polished all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix Extruded brass handles 100mm long, fabricated type polished all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix Brass, sliding door bolt 300mm long, sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts, with ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix in repairs door closer, aluminium body, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg with ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Everite / Universal / Prabhat Door King / Perfect Hydraulic / Dyana

Supply and fix in repairs mortice lock, vertical type, size 100mm with ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Harrison / Godrej & Boyce Co Ltd / RP Lock Co New Delhi / KICH

Supply and fix in repairs harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc complete all as specified and as directed by Engineer-in-Charge. Make : Harrison / Crown / Jindal / ESSESS

Material and labour for non skid coloured ceramic tiles, 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 15mm thick in CM (1:6) complete all as specified and as directed by Engineer-in-Charge. Make: H R Johnson / Kajaria / Somany Tiles Ltd / Nitco tiles

Material and labour for glazed coloured ceramic tiles, 1st quality of size 450 x 300 x 7 mm thick (or nearest size) on vertical surface such as skirting, dado, riser/steps etc, set and jointed in neat cement slurry and pointed in colour cement to match including backing coat 10 mm in CM (1:4) complete all as specified and as directed by Engineer-in-Charge. Make: H R Johnson / Kajaria / Somany Tiles Ltd / Nitco tiles

Material and labour for light shade virified Ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed of 20mm thick in cement mortar 1:6 etc complete all as specified and as directed by Engineer-in-Charge. Make: H R Johnson / Euro Tiles / Kajaria / Somany Tiles Ltd

Material and labour for light shade virified Ceramic tiles of size 600 x 150 x 10mm thick / 600 x 100 x 10mm thick polished, as in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat in cement mortar 1:6 etc complete all as specified and as directed by Engineer-in-Charge. Make: H R Johnson / Euro Tiles / Kajaria / Somany Tiles Ltd

Material and labour for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats etc complete all as specified and as directed by Engineer-in-Charge. Make: Sheenlac or equivalent as approved by GE

Material and labour for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats etc complete all as specified and as directed by Engineer-in-Charge. Make: Sheenlac or equivalent as approved by GE

Material and labour for preparing new plastered surfaces and applying two coats of Acrylic weather proof coat 100 % exterior grade paint over one coat of acrylic primer over a thin layer of wall care putty on wall surfaces complete all as specified and as directed by Engineer-in-Charge and as per manufacturers instructions. Make :Asian Paint - Apex exterior emulsion 100% acrylic/Berger Paint - Weather coat smooth/Nitco Paint - Outshine premium 100% acrylic exterior

Material and labour for complete removal of existing treatment of old wall surfaces including preparation and applying two coats of Acrylic weather proof coat 100 % exterior grade paint over one coat of acrylic primer over a thin layer of wall care putty on wall surfaces complete all as specified and as directed by Engineer-in-Charge and as per manufacturers instructions. Make :Asian Paint - Apex exterior emulsion 100% acrylic/Berger Paint - Weather coat smooth/Nitco Paint - Outshine premium 100% acrylic exterior

Material and labour for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over a thin layer of wall care putty 1.5mm thick etc complete all as specified and as directed by Engineer-in-Charge. Make: M/S SHALIMAR/ M/S BERGER/ M/S NEROLAC/ M/S ASIAN (Tractor Brand)

Material and labour for complete removal of existing treatment of old wall surfaces including preparation and applying two coats of oil bound distemper over a coat of alkali resistant primer over a thin layer of wall care putty 1.5mm thick etc complete all as specified and as directed by Engineer in Charge. Make: M/S SHALIMAR/ M/S BERGER/ M/S NEROLAC/ M/S ASIAN (Tractor Brand)

Supply and fix in repairs vitreous china wash down, white, water closet pan wall hung- WC with UF seat cover, hinges, accessories set, size 540 x 360 x 405 including fixing bolts, flushing cistern and flush pipe fixed to wall complete all as specified and as directed by Engineer-in-Charge. Make: Cat Part : FNS-WHT-40951 of Jaguar or equivalent in cera / Parryware / M/s Hindustan Sanitary Ware

Supply and fix in repairs vitreous china white wash hand basin flat back of size 420 mm x 500 x 190 including pillar taps,waste coupling, chain and plug and porcelain stopper, brackets, cutting for and pinning in ends of brackets complete all as specified and as directed by Engineer-in-Charge. Make : Cat Part : FNS-WHT-40931 of Jaguar or equivalent in cera / Parryware / M/s Hindustan Sanitary Ware

Supply and fix 32mm bore Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap all as specified and as directed by Engineer-in-Charge.

Supply and fix toilet paper holder, coloured, vitreous China, box type all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for machine cut, machine polished green marble slab 20mm thick, in steps, jambs, pillars, window-cills, cooking platform, bedded and jointed with grey cement slury and pointed with white cement with admixture of pigment to match the shade including necessary moulding of edges as required at site, over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge

Supply and fix 12mm thick glass door with eitching compete with handles 2 Nos, double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, goverining pivot made of brass, other parts made of mild steel heavy duty, steel cover at top and bottom complete all as specified and directed by Engineer-in-Charge

Supply and fix 15 micron coloured aluminium sections for sliding or openable windows, ventilators, doors, partitions etc including fabrication of frame & shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc including all accessories such as glazing clips and rubber beadings for fixing glass panes / wire mesh in frame complete all as specified and as directed by Engineer-in-Charge. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India Note: (i) Glass panes /wire mesh will be measured & paid separately. (ii) Rubber beading will not be weighed.

Supply and fix 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work etc complete all as specified and as directed by Engineer-in-Charge. Make : Novapan / Eco Board Industries, Pune / Kitply / Green Ply / Anchorlam

Supply and fix 50mm dia, polished, hard wood knobs fixed with screws all as specified and as directed by Engineer-in-Charge.

Supply and fix 15 micron coloured aluminium anodised grill of design No DG-117, 10 mm thick, cut to required size/shape, and fixed in position with and including aluminium beading and frame complete all as specified and as directed by Engineer-in-Charge. Make: DECOGRILLE of Associated group or equivalent make as approved by GE

Supply and fix 4.0mm thick sheet glass, ordinary quality in square or rectangles, exc. 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge. Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain

Supply and fix 4.0mm thick sheet glass, ordinary quality, pin headed / frosted type in square or rectangles, not exc. 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge. Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain

Supply and fix aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples comlete all as specified and as directed by Engineer-in-charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix in repairs aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples comlete all as specified and as directed by Engineer-in-charge. Make : Classic/ Shalimar/ CLIF/ARGET

Material and labour for brick work with sub class "B" bricks, straight or curved on plan, exceeding 6 mtr mean radius, with old size bricks, built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge

Material and labour for Plain Cement Concrete Nominal mix 1:3:6 type C-2, using 40mm graded stone aggregate)as in 75mm thick plinth protection & finished even and smooth without using extra cement including spike rolling or making impressions of expanded metal whilist is green complete all as specified and as directed by Engineer-in-Charge.

Dismantling of existing roof treatment such as PCC tiles including cement mortar bedding with APP membrane, removing serviceable tiles to store and rubbish out side MD land complete all as specified and as directed by Engineer-in-Charge.

Supply and fix pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick (total thickness including coating) of any colour having tensile strength of 550 MPA with as in roof covering, cladding to wall, fixed with self tapping screws including taking down of old unserviceable wall cladding complete all as specified and as directed by Engineer-in-Charge. Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets.

Material and labour for APP modified waterproofing treatment over existing RCC roof slab with following specification including brushing off the surface to receive the treatment obtain the required surface complete as directed :- (a) Applying bituminous primer @ 1.2 kg/Sqm on the prepared dry roof surface. (b) Laying 4mm thick APP membrane Plain finish weight not less than 4.50 kg per sqm by torch application with minimum 10cm side lap and 15cm end lap. The laying of membrane shall be got done through an authorized applicator of manufacturer of APP membrane. Make: STP Ltd / Texsa India Ltd / IWL Ltd / Tiki Tech Note : Quoted rate includes the disconnection existing tanks of any litres capacity including all fittings, setting aside (for lowering if reqd) for roof treatment & reconnecting and refixing in position including all fittings complete all as directed.

Material and labour for 75mm thick (average thickness) PCC (1:2:4), type B1, using 20mm graded stone aggregate mixed with water proofing compound at the rate of 3% by weight of cement as in padding concrete for roof slab portion laid to slope as required and finishing even & fair without using extra cement complete all as specified and directed by Engineer-in-Charge. Note: WPC will be measured and paid separately.

Material and labour for cement concrete tiles 25cm x 25cm x 20mm thick, machine pressed, set, jointed and pointed in neat cement slurry in floors, and cut and polished with grey cement and no pigment including 20mm thick cement screed in cement mortar 1:6 etccomplete all as specified and directed by Engineer-in-Charge. Make : M/S NITCO, Mumbai / M/S Mehatab Tiles, Indore / National Tiles / Modern Tiles and Marbles Bangalore

Demolition of false ceiling any type and in any description including cover fillets complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repairs 12mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium frame work with screws and fixed in jointless finish with joining compound and joining tape as per manufacturer's instruction complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs 15mm bore angle cock with flange, cast copper alloy, chromium plated, screwed down, screwed for iron pipe or for brass ferule, heavy duty complete all as specified and as directed by Engineer-in-Charge. Make- Prayag, Cat No. 8610 or equivalent of Seiko/ Jaquar

Supply and fix in repairs PVC connection 15mm dia with PTMT nuts of length 600mm complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs 15mm bore Bib taps, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, heavy duty, screwed down, screwed for iron pipe or for brass ferrule, conforming to IS complete all as specified and directed by Engineer-in-Charge. Make: Jaquar / Soma / Leader / Zoloto

Supply and fix in repairs 15mm dia two way bib taps, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge. Make: Jaquar / Soma / Leader / Zoloto

Supply and fix repair brass chromium plated Health faucet with 15mm dia and 900mm long with hook and chromium plated nuts complete all as specified and directed by Engineer-in-Charge. complete all as specified and directed by Engineer-in-Charge. Make: Jaquar / Prayag / / Soma / Leader / Zoloto

Supply and fix in repairs 15mm bore brass wall mixer 3 in 1 system with provision of both hand shower and overhead shower complete with 115mm long bend pipe connecting legs and flange (without hand and overhead shower) for mixing hot or cold water screwed down for iron pipe complete all as specified and directed by Engineer-in-Charge. Make: Cat Part : OHS-49497 of Jaguar or equivalent)

Supply and fix in repairs 15mm dia over head shower 300 x 200 mm oval shaped single flow (ABS body Chrome plated with grey face plated) with Rubit cleaning system including fixing to steel pipe or union fixed complete all as specified and as directed by Engineer-in-Charge. Make: Cat Part : OHS-49497 of Jaguar or equivalent

Supply and fix Hand shower 140mm dia Round shaped multi flow with air effect (ABS body and Face plate Chrome plated) with Rubit cleaning system fixed complete all as specified and as directed by Engineer-in-Charge. Make: Cat Part : HSH-CHR-1729 Make : Jaguar or equivalent

Supply and fix in repair flexible tube 8mm dia and 1.5m long with nuts complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair glass corner shelf of dia 250mm including all necessary brass chromium plated fitting complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs tubular towel rail brass chromium plated 20mm dia, 'D' type, 60cms long between flanges fixed to walls with screwscomplete all as specified and directed by Engineer-in-Charge. Make : Crown / Jindal / ESSESS

Supply and fix in repairs steel water tubing of size 20mm bore, medium grade, galvanised iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239, fixed to wall / ceiling or laid in floor with suitable size GI clamps including making good disturbed surfaces as per existing surfaces including taking down of old rusted GI pipe complete all as specified and as directed by Engineer-in-Charge. Make: Tata/Jindal/Zenith/Swastik/Prakash

All as per item No 71 described here-in-before but 15mm dia

Disconnecting existing tanks, setting aside (or lowering if required) and including repairs, cleaning and removing all scale dirts, etc, from tanks and form mouths of circulating pipes etc and hositing if requried re-connecting and re- fixing in position of capacity 1000 ltrs etc all as specified and as directed by Engineer-in-Charge.

Supply and fix Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 1000 litres, three layers, including necessary inlet, outgoing GI hipple with check nut etc, hoisted and fixed in position including taking down existing tank complete all as specified and directed by Engineer-in-Charge. Make: Sintex / Infra / Polycon, Jaipur / Rotex

Supply and fix in repairs 20mm dia ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed. Make : Leader / Bir / Zoloto / Kirloskar

Supply and fix in repairs gun metal, globe or gate valves, with iron wheel head, ISI Marked screwed both ends for iron pipe and fixed for 20mm dia bore complete all as specified and as directed. Make : Leader / Bir / Zoloto / Kirloskar

Supply and fix UPVC (SWR) soil, waste and rain water drainage pipes 110mm bore single socketed in any length with rubber ring joint fixed to wall as rain water pipe with suitable size PVC damps by maintaining 30mm clear gap between finished wall surface and pipe including taking down existing pipe etc complete all as specified and as directed. Make : Prince / Supreme / Finolex

Supply and fix UPVC (SWR) bends of any radius 110mm bore with access door etc complete all as specified and as directed. Make : Prince / Supreme / Finolex

Material and labour for plain cement concrete 1:5:10, type E-2, Using 40 mm graded stone aggregate, as in 100mm thick sub base, finishing surface fair and even etc., complete all as specified and as directed.

Material and labour for machine pressed precast concrete interlocking paver block of any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment with glossy finish including 20mm thick sand cushioning etc complete all as specified and as directed by Engineer-in-Charge. Make: Mehtab Tiles/Indore/M/S Ultra Tiles/NITCO/Topaz Tiles/Navya Tiles Jodhpur

INTERNAL ELECTRIFICATION Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc., removing materials to stores for keeping in safe custody in case of re-use at site or removing materials out side MD land in case of Credit and making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

Material and labour for Point wiring complete with PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor conforming to IS-694, 1.5sqmm (nominal area) drawn through and including non metallic rigid PVC conduit (ISI marked) and accessories on surface of wall/roof with modular white cover plate with frame fixed on new modular sunken type pressed steel/welded terminal boxes made out of 2mm mild steel sheet, 3mm thick laminated sheet cover for mounting of switches, socket outlets, regulators etc., including provision of PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor 1.5sqmm as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed for the following: Make for copper conductor: POLYCAB/KALINGA/VINAY/FINOLEX/HAVELLS/VINAY Make for PVC Conduit: Anchor / Modi / Presfit / Precision / Astral

One light/fan/bell point controlled by one one-way switch, SP, 5 Amps

One 3 pin 5 Amps switch socket combination point on the same board controlled by one switch.

One 3 pin 5 Amps switch socket combination point on independent board.

One light point controlled by two, two way switches, SP, 5 Amps

All as per item No. 82 described here - in - before but for 3 pin 15 Amps switch socket combination on independent board with 2.5sqmm copper cable and provision of 2.5sqmm PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor for earth continuity conductor connected to common earth dolly connecting up to fittings complete.

Supply and fix modular type Switch socket combination, multipurpose, 2 in 1, 3 Pin 6Amps /3 Pin 16Amps controlled by one switch, flush type, universal, ISI marked complete all as specified and as directed. Make : Anchor / Havells / Crabtree / Legrand / Leader

Supply and fix modular type Switch socket combination, multipurpose, 2 in 1, 2 Pin 6Amps /3 Pin 6Amps controlled by one switch, flush type, universal, ISI marked complete all as specified and as directed. Make : Anchor / Havells / Crabtree / Legrand / Leader

Supply and fix modular type Switch Piano, flush type, single pole, one way, 6 Amps, 240 volts, ISI marked complete all as specified and as directed Make : Anchor / Havells / Crabtree / Legrand / Leader

Supply and fix modular type Switch Piano, flush type, single pole, two way, 6 Amps, 240 volts, ISI marked complete all as specified and as directed Make : Anchor / Havells / Crabtree / Legrand / Leader

Supply and fix Ceiling rose, surface type Bakelite, three terminal 65x32mm, ISI marked complete all as specified and as directed. Make : Anchor / Havells / Crabtree / Legrand / Leader

Supply and fix in repairs LED tube light fitting 1 x 22 Watts, 230 volts, all pre wired fixed on walls with all fixing accessories such as 2 Nos of PVC square/round box, screws etc and connecting up three core flexible copper conductor cable of size 24/0.20 sqmm including LED tube light complete all as specified and as directed by Engineer-in-Charge. Make: Cat Part No.LUMILINEPLUSBS22WLED865SPCSS of Havells or equivalent to Philips / Bajaj / Crompton greaves / Sakthi / Wipro

Supply and fix in repairs ceiling LED square / round light of 15W, 240V, 50Hz for indoor spaces, Surface mounted LED downlighter with white powder coated aluminium housing with integrated electronic driver complete with all accessories connected from existing ceiling rose with 3 core flexible copper wire of required length complete all as specified and as directed by Engineer-in-Charge. Make: Cat Part No. ENDURANEOHESURFA CEDLS15WLED840S of Havells or equivalent to Philips / Bajaj / Crompton greaves / Sakthi / Wipro

Supply and fix recess & surface / pendent mounting LED flat panel 1' x 1' (warm light / whightlight ( made of die cast aluminium housing with hogh efficient LEDs & glare free opal diffucer, IP 20 complete all as specified and as directed by Engineer-in-Charge. Make : Cat Part No. HLFPR11-02-24-CW of Halonix or equivalent to Philips / Bajaj / Crompton greaves / Sakthi / Wipro / Havells

Supply and fix in repairs LED Mirror light fitting 1 x 16w connection with three core copper flexible cable 16/0.20 mm from ceiling rose to fitting complete all as specified and as directed by Engineer-in-Charge. Make: Cat part No. SZSLBMX016 of Sakthi or equivalent to Philips / Bajaj / Crompton greaves / Havells / Wipro

Supply and fix in repairs double door, sheet metal enclosure powder coated MCB DB SPN 12 way with 200 Amps rated bus bar, 240 volt, horizontal type, IP 53 protection, flush in walls including making good of disturbed surface to match with existing surface complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / L&T / Havells

Supply and fix in repairs MCB TPN, 63amps, 415 volts,10 KA rupturing capacity 'C' series complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / L&T / Havells

Supply and fix in repairs MCB SP, 6 to 32amps, 240 volts,10 KA rupturing capacity 'C' series complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / L&T / Havells

Supply and fix in repairs MCB SPN, 6 to 40amps, 240 volts,10 KA rupturing capacity 'C' series complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / L&T / Havells

Material and labour for submain wiring complete with and including 2 runs of 6.0sqmm, single core FRLS, PVC insulated and unsheathed, multistranded, copper conductor cable, single core, 1100 Volts grade drawn through and including PVC conduit, medium grade of size 25mm dia including accessories such as Tees, Elbows, junction box, reducers etc as required and fixed on walls and 4.0sqmm PVC multistranded copper conductor cable for earthing and connected to common earth dolly including taking down the existing submain wiring complete all as specified and as directed by Engineer-in-Charge. Note : Two runs of 6.0sqmm PVC insulated cable and one run of 4.0sqmm cable and one run of PVC conduit shall be measured as one unit length.

Material and labour for Earthing complete with Galvanised steel earth plate electrode 600mm x 600mm x 6.0 mm thick, buried vertically in ground (earth pit not less than 2.25 metre deep below normal ground level) connected to GI wire 4 mm dia, by means of GI bolts, nuts, check nuts and washer etc, to be provided to the extent of 7.5 metres, all as shown on electrical plate No 3 of MES SSR- 2009 Part-I other end connected to Panels, laid under floors/plinths or fixed on walls or concealed in wall etc; with provision of charcoal & common salt packed upto minimum 150 mm all around the earth plate, including PCC chamber in cement concrete (1:2:4) type B-1(using 20 mm graded aggregate) and finished even and smooth without using extra cement, M.S angle iron frame 50x50x6mm, cast iron cover with locking arrangement, with, GI 20 mm bore medium grade pipe and MS funnel with wire mesh for watering arrangement, GI pipe light grade 15mm bore for protection of GI wire, necessary excavation and earth work in any type of soil / strata & testing complete all as specified and as directed by Engineer-in-charge.

Supply and fix modular type fan regulator rotary step type delux, 240V, 50Hz ISI marked complete all as specified and as directed. Make : Anchor / Havells / Crabtree / Legrand / Leader

Supply and fix in repairs Modular type bell push one module for call bell single pole one way 6 Amps, 240 volt, 50Hz all as specified and as directed by Engineer-in-Charge. Make: Anchor / Leader / L&T / Legrand

Supply and fix Call bell electric (Ding Dong type) suitable for working on 240 volts AC supply multi music type complete all as specified and as directed. Make: Anchor / Legrand / L&T

Taking down split type air conditioner of any type/make/capacity by dismantling inner and outer unit, dismantling suction / discharge pipe, removing all electrical connection and carry it to store after building special repair work done, refixing it at same location as earlier including installing, commissioning, testing and making good of disturberd surfaces to match with existing surface etc complete all as specified and as directed by Engineer-in-Charge.

Taking down the ceiling fan /exhaust fan / geyser of any make / type/ size/ sweep at site from any height of the building and revising the same after preparing old surfaces of ceiling fan/exhaust fan/geyser of any capacity or sweep, by scrapping and removing dust etc and filling cavities with one coat of filler and applying white/OG synthetic enamel paints by spraying and writing MES Nos IN BLOCK LETTERS IN 20/25 MM size letters with black/white synthetic enamelled paint as per existing complete all as specified and as directed by Engineer-In-Charge

Supply and fix AC box with male and female terminal and MCB SP 20Amps, 240V complete all as specified and directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

SAI SERVICE

mp construction co

S.N Enterprises