Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.8 LAccepted-AOC | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹32.9 L+₹1.4 L (4.47%)Rejected-Finance | L2 | Rejected-Finance Being other than lowest bidder. | |
| 3 | L3₹33.4 L+₹1.9 L (6.08%)Rejected-Finance B 56 LANE NO 4A SECTOR 7 VASHNAVI ENCLAVE CHANNI HIMAT JAMMU 180015 | JAMMU | JAMMU AND KASHMIR | 180015 | L3 | Rejected-Finance Being other than lowest bidder. | |
| 4 | L4₹34.9 L+₹3.4 L (10.9%)Rejected-Finance | L4 | Rejected-Finance Being other than lowest bidder. |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
4 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF JAMMU
GE AF JAMMU
CA NO GE/AFJ-43/2023-24 REPAIR TO CERTAIN SMQs AND OMQs MD ACCN IN DOMESTIC AREA UNDER GE (AF) JAMMU
2023_MES_626377_1
CA NO GE/AFJ-43/2023-24
Open Tender
Civil Works
Item Rate
270 days
JAMMU
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE(AF) JAMMU
₹80,000
Yes
6 Feb 2024
2 Nov 2023
6 Dec 2023
2 Nov 2023
4 Dec 2023
20 Nov 2023
Amount
SCH A PART-I BLDG WORK
Demolition of cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level complete all as specified and as directed.
Demolition of reinforced cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level complete all as specified and as directed.
Removing of bldg material by manual or mechanically incl demolished material from site and to be removed upto 5Km distance outside defence area to be dumped at a place appeared by state govt for the same purpose. The rates for same should be deemed to be included in the said item and nothing extra should be paid on this account complete all as specified and as directed.
Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar complete all as specified and as directed.
Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters (Without taking off shutters from the frames complete all as specified and as directed.
Taking down Chowkhat or frames exceeding 1.5Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frames complete all as specified and as directed.
Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed.
Dismantling floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed.
M/L Plain cement concrete (1:5:10) type E-2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete in sunken floors all as specified.
M & L 75mm th PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base, Floors, Paving finished even and fair complete all as specified.
M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or over roof concrete surfaces mixed with integral water proofing compound finished even & smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured & paid seperately.
All as per item No 1.12 hereinbefore but 5mm thick in CM 1:3 on ceiling,chajja,roof projection etc complete all as specified and as directed.
M&L for 15 mm thick screed bed in cement mortar 1:4 for laying floor finishes/floor tiles under floor complete all as specified and as directed.
M&L for joint free ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors over 15 mm thick screed bed in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
All as per item No 1.15 hereinbefore but in skirting including necessary cutting of tiles complete all as specified and as directed.
M&L for coloured glazed ceramic tiles of size 450x300mm x7mm thick, on verticals surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and as directed.
M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished for receving tiles as directed by Engr-in-charge.
M/L 25mm thk PCC 1:2:4 type B-1 using 20mm graded crushed stone agg as wearing coat for laying floor finishes, finished fair to receive tiles complete all as specified and as directed.
M & L for cement concrete 1:3:6 type C-1, 75 mm thick using 20mm graded crushed stone aggregates as in plinth protection finished fair and even complete all as specified and as directed.
M/L for 40mm thk PCC 1:2:4 type B-1 using 20mm graded crushed stone agg as in flooring finished even and smooth without using extra cement complete all as specified and as directed.
M/L reinforced cement concrete (1:2:4)typeB-1using 20mm graded crushed stone aggregate as in slabs, roof projection etc, and finishing exposed surfaces fair & even all as specified.
M&L for brick work with sub class 'B' bricksstraight or curved on plan exc. 6.00m meanradius built in cement mortor 1:6.complete all as specified and as directed.
M& L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
Supply only integral water profing compound ISI marked .
M&L Marble work 18 to 20mm thick (table rubbed and polished) in window cills in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of green marble over 15 mm thick Screed in CM (1:4) complete all as specified and as directed.
M&L for pre- polished granite slab machine cut of any shade as approved by GE of 18-20 mm thick inc over cement screed bed including Cutting and nosing with suitable hole for cylender gas pipe, Grinding and Mirror polishing(Granite finish) with suitable grinding stones set in CM 1:4 in single piece for cooking platform complete all as 'specified and as directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.
S&F Pressed steel frames (Factory made) made out if 1.25mm thick mm black MS sheet for doors, with double rebates including necessary fixing lugs, Butt hinges, lock strike plate, etc complete, size of frame 125x60mm incl one shop coat of red oxide zinc chrome primer,incl bottom of each chowkat to be welded with 2 Nos 25x25x3mm thick flat iron projecting 10 cm on either side and back fill to chowkahts with PCC 1:3:6 type C-0 using 12.5mm graded crushed stone aggregate after applying and including one coat of black paint to prevent from corrosion complete all as specified and directed by Engr-in-Charge.
S&F Pressed steel frames (Factory made) made out if 1.25mm thick mm black MS sheet for doors, with one or more rebates including necessary fixing lugs, Butt hinges, lock strike plate, etc complete, size of frame size 105x60mm incl one shop coat of red oxide zinc chrome primer,incl bottom of each chowkat to be welded with 2 Nos 25x25x3mm thick flat iron projecting 10 cm on either side and back fill to chowkahts with PCC 1:3:6 type C-0 using 12.5mm graded crushed stone aggregate after applying and including one coat of black paint to prevent from corrosion complete all as specified and directed by Engr-in-Charge.
S/F 35mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides deco rative face veneer with lipping/frame to match
S&F in repair Factory made solid panel PVC door shutter 30 mm thick (style) Consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles andSingle Side Prelam PVC sheet used instead of Plain colour PVC sheet and stile & rails having one side feathered edge and on other side 10mm 900 bent edgefitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beadingand jioned together with solvent cement,supplying &fixing in the frame at site as per specification & drg wire gauzed i.e panel will be of wire gauze in lieu of single side prelam PVC shet panel.The wire gauze shall be welded to MS tubes.The wire guage shall be stretched to tighten firmly comlete all as speciefied and asdirected by Engr in charge.
S&FAnodised aluminium window powed coated and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified
S&F anodised aluminium powed coated window with glazed and wire mesh shutter sliding aluminium open three track section having specific size of style ,top rails and bottom rails including anodised aluminium frame incl necessary joining cleats, glazing clips rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings complete and including glazing by using 5mm thick plain sheet glass and stainless steel wire mesh of dia 0.36 mm and aperture 1.40 mm complete all as specified and as directed Note :- S& F of 5mm thick glass & SS wire mesh payment will be made separately)
S&F PVC roller not exc 40mm dia fixed to alluminium slinding window shutter with necessay clip or screw etc all as specified and as directed
S&F EPDM rubber to aliminium window frame for fixing window glass etc all as specified and as directed.
S&F slinding window lock consisting of aluminium body with pvc mail and female with necessary screw or fixing arrangment all as specified and directed.
S&F Aluminium anodised powder coating grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge.
Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge.
Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge
S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engr in charge.
M&L for sheet glass 5mm thick ordinary glass, and glazing with oil putty or wooden beads or with EPDM rubber exceeding 0.5 Sqm in each pane complete all as specified and as directed by Engr in charge.
M&L for sheet glass 5mm thick ordinary glass, and glazing with oil putty or wooden beads or with EPDM rubber not exceeding 0.5 Sqm in each pane complete all as specified and as directed.
Dismantling boarding, any description, fixed in any position with screws complete all as specified and as directed.
M & L for fillets, bull- nosed, splayed, chamfered or rounded on one edge or face, square, rectangular or triangular in section clean sawn, secured with nails 2nd class hard wood exc 13 and n.exc 25 sqcm complete all as specified and as directed.
PVC board 20mm thick,one side UV printed designing and back side plain colour printed(weight of board should be 11-12kg per sqm of board) for cup board or kitchen cabinet with self ,drawer,shutter and frame full size fitted under cooking platform and other platform including fittings etc complete all as specified and directed
S&F aluminium section of size 63.5mmx38mmx1.28mm thick as in ventilator with one fixed frosted glass of 4mm thick size 450mmx450mm and five no lowered frosted glass of size450mm x 100 mm wide with necessary fitting and fixtureand fixing arrangment all as specified and directed by Engr-in-Charge.
S & F 30 mm width of flap Continous (Piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed.
S & F 40mm dia, brass cupboard knobs fixed with nut, screw and washer complete all as specified and as directed.
S & F aluminium hasp and staple , 125mm safety type with mild steel hinge pin including bolt type complete all as specified and as directed.
S & F 140mm ball catches with 8 mm dia steel ball, and brass body and striking plate including letting in complete all as specified and as directed.
S & F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required:hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed by Engr in charge.
S&F Rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete all as specified and as directed by Engr in charge.
S&F 1st class hardwood Small fitting such as brackets of any type,latch and hinge blocks, shapeddoor and window stops and the like including allnecessary labours, articles not exceeding 200Cu.cm each complete all as specified and as directed by Engr in charge.
S & F 150 mm aluminium barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engr in charge.
S & F 200 mm aluminium , barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engr in charge.
S & F 300 mm aluminium, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and as directed by Engr in charge.
S&F mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engr in charge.
Supply & Fixing 150 mm aluminium handles, cast type, anodised complete all as specified and as directed by Engr in charge.
Supply & Fixing 125 mm Aluminium handles, cast type, anodised complete all as specified and as directed by Engr in charge.
S & F 75 mm size stainless steel butt hinges complete all as specified and directed
All as per item No 1.61 hereinbefore above but 100mm size complete all as specified and as directed by Engr in charge.
M & L for aluminium drapery rod in repair, with pre coated PVC lamination of dia not less than 25mm with brackets on both end of rod and two nos globe on both ends for each door/windows . Brackets shall be at galvanised steel 1.6mm thick complete all as specified and directed.
M&L floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 150mm complete all as specified and as directed by Engr in charge.
S&F for 75 mm long Extruded aluminium ally handles, fabricated type., anodised complete all as specified and as directed by Engr in charge.
M&L Mild steel TMT bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed by Engr in charge.
Taking up or down steel tubing 15mm bore and connection including cleaning for refixing or removal to store complete all as specified and as directed by Engr in charge.
All as per item No1. 67 hereinbefore but 20mm dia complete all as specified and as directed by Engr in charge.
Supplying and laying16mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
Supplying and laying 20mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
Cutting chases, pinning in, making good to facing through brick wall where reqd and pointing in CM 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting exc 10 cm but n.exc 20 cm girth complete all as specified and as directed by Engr in charge.
Dismantaling of AC/ PVC drain pipes jointed in cement mortar and taking out from trenches or walls of any bore including fittings 100 mm dia complete all as specified and as directed by Engr in charge.
Dismantaling of AC/ PVC drain pipes jointed in cement mortar and taking out from trenches or walls of any bore including fittings 75 mm dia complete all as specified and as directed by Engr in charge.
S&F for PVC (SWR) floor trap 100/75mm dia of outlet, plain with grating including jointing with solvent cement fixed in repairs complete all as specified and as directed by Engr in charge.
S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls bore of pipe 110 mm with PVC clamps and saddles complete all as specified and as directed by Engr in charge.
S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls bore of pipe 75 mm with PVC clamps and saddles including taking down existing pipe complete all as specified and as directed by Engr in charge.
S & F PVC (SWR) bends of any radius with access door bore of pipe 110 mm complete all as specified and as directed by Engr in charge.
S & F PVC (SWR) bends of any radius with access door bore of pipe 75 mm complete all as specified and as directed by Engr in charge.
S & F PVC (SWR) reducers bore of pipe 110 mm complete all as specified and as directed by Engr in charge.
S & F PVC (SWR) couplers bore of pipe 110 mm complete all as specified and as directed by Engr in charge.
S & F PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 110 mm complete all as specified and as directed by Engr in charge.
S & F PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 75 mm complete all as specified and as directed by Engr in charge.
110mm bore PVC (SWR) vent cowl complete all as specified and as directed by Engr in charge.
75mm bore PVC (SWR) vent cowl complete all as specified and as directed by Engr in charge.
S & F PVC (SWR) branch piece, single (single Y) equal or unequal 100 mm dia complete all as specified and as directed by Engr in charge.
S&F in repair sink without drainage board made of stainless steel 1mm thick with plugs, washer and wastes including fixing in cement mortor 1:3 to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915x460mm,bowl size 410 mmx 330 mmx 160 mm complete all as specified and as directed by Engr in charge.
S & F Stainless steel Plate rack 750mm x 600 mm x 250mm deep with plate racks, spoon holders, shelves etccomplete all as specified and as directed by Engr in charge.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern & flush pipe) complete all as specified and as directed by Engr in charge.
S&F heath faucet(ABS Body) mild steel CP sutabile for 15mm dia pipe with 1.25mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed.
S&F in repair vitreous china white wash hand basin corner type 'includingCI/MS brackets including cutting for and pinning in brackets but excluding waste pipe.
S&F in repairs10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and handle complete all as specified .
S&F in repairs for 15mm dia of pipe bib taps cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed by Engr in charge.
S&F in repairs for 15mm dia of pipe angle valves ,fancy type and chromium plated with long shank and cup screwed both ends for iron pipes or for Unions and fixed complete all as specified and as directed by Engr in charge.
Supply and fixing in repair, 20 mm dia gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.
S & F glass shelf 600mm long with and including chromium plated railing , brass screws and wooden/plastic cleats complete all as specified and as directed by Engr in charge.
S & F brass chromium plated center hole mixer for hot and cold water with capstan heads, screwed downhigh pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipes 15 mm dia. Cat part No-QT F2006461 HT F3001461 CERA or equivalent
S & F brass chromium plated mixer for sink for hot and cold water with capstan heads, screwed downhigh pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipes 15 mm dia. Cat Part No- QT F 2006501 HT F 3001501 Make:- CERA and Equivalent.
S & F brass chromium plated wall mixer 3 in 1 for hot and cold water with capstan heads, screwed downhigh pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipes 15 mm dia.Cat part no-QT F2006401 HT F3001401 Make;- CERA or equivalent
S&F in repairs PVC connection 15mm diaand 45cm long with two Nos of brass checknuts and washers complete all as specified and as directed by Engr in charge.
SS&F in repairs brass Choromium plated shower rose with or without swivel joints 125mm size including fixing to steel pipe or union complete all as specified and as directed by Engr in charge.
PVC Mirror with cabinet shelf 450x600mm including screws and fixing on wall complete all as specified Make :- Paryag or Equivalent.
S&F grating doom 125mm dia with waste hole of CP complete all as specified and as directed by Engr in charge.
S & F waste coupling of CP (half or full threaded) 32 mm dia complete all as specified and as directed by Engr in charge.
M & L for PVC waste pipe 32 mm dia flexible with cup to fit wash hand basin waste coupling complete all as specified and directed.Make:- Paryag or Equivalent.
Supply and fixing of soap-dish chromium plated all as specified.
Supply and fixing of corner type glass shelf (three peace) incl steel rail all as specified
Supply and fixing of stainless steel towel ring all as specified
S&F in repairs 600mm long tubular tower rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard woodembeded in cement mortor 1:3 with MS screws complete all as specified.
Dismantling water tanks & removing to store exc 250 & n exc 500 litres complete all as specified and as directed by Engr in charge.
Supply & fixing Rotational moulded Polyethylene water storage tank - 500 liters (Triple layer)capacity (cylidrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I incl PTMT float valve 25mm dia.complete all as specified and as directed by Engr in charge.
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. & hositing if required reconnecting & re-fixing in position including Cleaning & removing all scale & dirt, etc. from tanks & form mouths of circulating pipes, etc.exc 250 & n exc 500 litres complete all as specified and as directed by Engr in charge.
Applying two coats of synthetic enamel paint on wooden surfaces of any description,over 10cm width or girth when unconnected with other painting or when painted in different tint, including preparation of new surface & applying one coat of pink primer complete all as specified and as directed by Engr in charge.
Material & Labour for complete removal of existing treatment, washing rubbing down and stooping of painted surfaces and applying Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and as directed by Engr in charge.
Material & Labour for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and as directed by Engr in charge.
M&L for distempering walls with two coats of washable distemper oil bond distemper on new surfaes(white or tinted) over a coat of 3mm thick wall putty, over a coar of primer as directed after washing/rubbing down and stopping of distempered and painted surfaces as in preparatory work to give uniform and smooth finish all complete all as specified and as directed by Engr in charge.
M&L for Applying two coats of washable distemper oil bond distemper , white or tinted on old wall surface including preparation of surface over a coat of 3mm thick wall putty as directed after washing/rubbing and stopping of distempered and painted surfaces as in preparatory work to give uniform and smooth finish complete all as specified and as directed by Engr in charge.
M&L for Applying two coats of washable distemper oil bond distemper , white or tinted on old ceiling surface including preparation of surface over a coat of 3mm thick wall putty as directed after washing/rubbing and stopping of distempered and painted surfaces as in preparatory work to give uniform and smooth finish complete all as specified and as directed by Engr in charge.
M&L for applying two coats of oil bound distemper, white or tinted on new celling surfaces surface over a coat of 3mm wall care putty including preparation of surface
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engr in charge.
M&L for preparation of new painted surfaces of steel and iron work of any description over 10 cmwidth or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of redoxide on new surfaces in any tint complete all as specified.
Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m complete all as specified and as directed by Engr in charge.
Forming jambs, in cement mortar 1:4 etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and as directed by Engr in charge.
Applying one coat of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as specified and as directed by Engr in charge.
SCHEDULE 'A' PART-I (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.
Rakesh Kumar Malia
ANIKET TRADERS
M/s Sunny Gupta
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .