Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.4 LAccepted-AOC 33 A DURGA NAGAR AMBALA CANTT 133001 | AMBALA | HARYANA | 133001 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹37.3 L+₹3.9 L (11.7%)Rejected-AOC | L2 | Rejected-AOC Other than lowest bidder | |
| 3 | L3₹39.2 L+₹5.8 L (17.2%)Rejected-AOC H NO 1395 SECTOR 21 PANCHKULA 134112 HARYANA | PANCHKULA | HARYANA | 134112 | L3 | Rejected-AOC Other than lowest bidder | |
| 4 | L4₹39.6 L+₹6.2 L (18.6%)Rejected-AOC VILL PO KUMARHATTI DIST SOLAN HP | SOLAN | SOLAN | HIMACHAL PRADESH | L4 | Rejected-AOC Other than lowest bidder | |
| 5 | L5₹41.6 L+₹8.1 L (24.3%)Rejected-AOC | L5 | Rejected-AOC Other than lowest bidder |
Tender Value
₹42.4 L
EMD Value
₹84,840
Closing Date
19 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Rahul Meena, IDSE, EE, Garrison Engineer
GARRISON ENGINEER KASAULI, DISTT SOLAN (HP) PIN 173204 PH 01792273107
PROVN OF CERTAIN SANCTIONED WORKS AT KASAULI and DAGSHAI UNDER GE KASAULI
2023_MES_619828_1
GEK-75/2023-24
Open Tender
Civil Works
Item Rate
180 days
DAGSHAI UNDER GE KASAULI
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE KASAULI
₹84,840
Yes
25 Nov 2023
21 Sept 2023
21 Oct 2023
21 Sept 2023
19 Oct 2023
5 Oct 2023
Amount
Schedule 'A' Section - I
Surface excavation n.exc 30cm deep and averaging 15 cm deep and getting out in hard/dence soilcomplete all as specified
Excavation in trenches in hard/dense soil not exceeding 1.50 metre wide and not exceeding 1.50 metre deep for foundations etc. or for cesspits etc. and not exc. 10 Sq. m on plan and not exc. 1.5 metre in depth and getting out complete, all as specified.
M&L for Returning, filling in, of hard/dense soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each complete, all as specified.
M&L for Removing excavated materials not exceeding 50 m and depositing where directed at a level not exceeding 1.5 metre above the starting point in soils, complete all as specified.
M&L for broken brick/stone or boulders for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed
M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed
M&L for cement concrete type D2 1:4:8 ( using 40mm graded aggregate) as in foundations, filling and mass concrete.
M & L for Form work to side of concrete foundation, footing, vertical or to batter,fair finished flat surface of concrete complete all as specified.
M & L for Form work to side of columns ,pillars,posts and piers etc fair finished flat surface of concrete complete all as specified.
M & L for Form work to sides and soffits of floor or roof beams,lintels etc fair finished flat surfaces complete all as specified.
M & L for formwork to soffits of suspended slabs such as roof slabs,floor slabs,landings and similar work,not exceeding 200 mm thick (Horizontal or sloping)
Mid steel TMT bars, 10 mm dia and over, cut to length, bent to shape required including cranking and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified.
Mid steel TMT bars,5mm dia and over 10 mm dia in stirrups and binders, cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified.
M&L for RCC M-25 (Design Mix) using 20 mm graded stone aggregate, as in foundation including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; complete all as specified.
M&L for RCC M-25 (Design Mix) using 20 mm graded stone aggregate, as in Columns,pillars,piers,posts and struts etc.; complete all as specified.
M&L for RCC M-25 (Design Mix) using 20 mm graded stone aggregate, as in Beams, lintels etc.; complete all as specified.
M&L for RCC M-25 (Design Mix) using 20 mm graded stone aggregate, as in Chajjas etc.; complete all as specified.
M&L for providing 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub base complete all as specified.
M&L for providing 50 mm thick PCC 1:3:6 type C2 using 20mm graded aggregate as in plinth protection, finished concrete surfaces even and smooth without using extra cement provided with construction joint at the interval n exc 3m etc complete all as specified.
M&L for 40 mm thick cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in floor, finished surfaces even and smooth with using extra cement complete all as specified.
M&L for Brick work with sub class ‘B’ bricks upto 6m height, straight or curved on plan exceeding 6 metre mean radius in cement mortar (1:6), using old size bricks, complete all as specified.
M&L for Rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4) finished with even and smooth complete all as specified.
M&L for preparation of plastered or unplastered new surfaces of walls incl cornices, chajjas, sun shades etc. and applying two coat of cement base paint and incl curing the surfaces and curing the same after application of cement base paint (tint as approved by GE) complete all as specified.
M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth with out using extra cement (Internal surfaces), complete all as specified and directed by Engr-In- Charge.
M&L preparatin of new / previously untreated surface & applying two coats of oil bound distemper (OBD) on wall surfaces over a coat of primer complete all as specified and directed by Engr-In- Charge.
M&L for for applying 3 mm thick wall care putty of new undecorated plastered surfaces of wall complete all as specified and directed
M&L for Plastic dividing strips, 1.5 mm thick & 28 mm width filled at construction joints in floor, all as specified and as directed.
S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats Fe 410-W(Gde?E- 250)qualityA?etc., complete all as specified and directed.
S&F MS Plates(plain or chequered) channels, angles, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment FE -290 Gde E-165.
S&F Mild steel screw bolts (machine made) Diameter of neck in 12 to 16mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm long but n exc 10cm long, complete all as spd and directed by Engr-in-charge.
S&F Pre-painted galvaiume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges etc. fixed all as per manufactures's instructions and fixed with self thread making steel screws of length not less than 50mm as directed by Engr-in-Charge at site with suitable arangement as required complete all as specified & directed.
S&F Pre-painted galvaiume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour (or decorated design cutting) having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges, flashing, eaves board valley gutter of any shape etc, cut to designed shape (Jhhallar) as directed at site fixed all as per manufactures's instructions and fixed with self thread making steel screws of length not less than 50mm as directed by Engr-in-Charge at site with suitable arangement as required complete all as specified & directed.
S&F Wind Tie bars with screwed ends, nuts, washers and mild steel plates for walls, chimneys, roofs, arches, etc. king rods and straining bolts conforming to Fe- 290 Gde-E-165
M&L for Framed work as in doors or gates of angle, or other section with gusset plates/sheets, rails, braces, wire mess etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and long heavy pintle hinges or steel hanging door fittings (inclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.
S&F Mild steel, plain, black sheet of thickness 1 mm, in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivet sand fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete.
S&F Factory made box type steel window with side hung shutters with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, 2 Nos steel handle, 2 Nos steel pegs and with glazing bars, including flat iron 50 x 6 mm for cover gaps and flat iron 12 x 3 mm for securing wire mesh, dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified.
M&L for framed work such as grills, gratings, etc with ends of bars sholderedcand /or riveted or forged into spikes, framed guard bars,barred iron doors, ladders, framed balustereds, walk ways railing frameworks of water tank and similar works all as specified and as directed.
S&F 4.8mm thick sheet glass ordinary quality any size and in any type of frame and glazing with iron nails or oil puty (or beading) in squares n.exc. 0.5 sqm in each pane complete all as specified and dircted by Engineer-in-Charge.
Material and labour for preparing new steel surfaces exc 10cm girth and applying two coats of synthetic enamel paint (any colour) over a coat of red oxide primer, complete all as specified and directed by Engr-in-Charge.
M&L Plain Cement concrete 1:3:6 type C2 using 40mm graded stone aggregates as in foundations, filling and mass concrete, all as specified.
S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins,posts where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, Fe-410-W(Gde-Fe-250) quality- B complete all as specified.
S & F Rolled sections as in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-410-W(Gde-Fe-250) quality- A complete all as specified.
75mm thick PCC (1:4:8) type D-2 (using 40mm gradded crushed stone aggregate) as in sub base of floor.
M&L for screed bed or bedding layer of mortar 20mm thick CM 1:6 for laying tiles and stone slab complete all as specified and directed
M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment set and jointed in neat cement slurry all as specified.all as specified and as directed
M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and no pigment set and jointed in neat cement slurry all as specified.all as specified and as directed.
M&L for plain cement concrete Type B-1, 1:2:4 (using 40 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges all as specified and directed.
M & L for Flame proof point wiring with 1.5 Sqmm (Nominal area),1100 Volt grade,PVC insulated unsheathed single core multi stranded FRLS copper conductor cable, with 1.5 Sqmm PVC insulated cable for earthing lead in and including ERW rigid steel heavy duty conduit concealed in walls with all conduit fittings, accessories like elbow and junction boxes etc shall be flame proof as per site requirement for one light point controlled by one switch complete all as specified and directed by Engineer-in-Charge.
Supply and fixing LED light fitting 1x30 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc, complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed.
S & F for flame proof /weather proof direct entry type rotary switch single pole on and off rotary motion swtich in cast alluminium alloy LM-6 enclosure, epoxy powder coated single pole 230 volts 16 Amps, AC ON/OFF switch, entries, earthing terminals for mounting on wall/steel structure etc complete in all respect with precesion of flame proof cable gland complete all as specified and directed.
S & F Flame proof distriution box TPN 4 way with bus bar weather proof in cast aluminium LM-6 enclosure, opened by externally spring type knobs, complete with M-25 cable entry to suit incoming cable and 8 Nos M-20 cable entries for out going cables from bottom, suitable for fixing on wall/ column/ sheet structure etc duly epoxy powder coated with flame proof flexible metallic conduit upto 01 mtr length in and incl the following items :- (a) MCB TPN 63 Amp - 01 Nos (b) MCB SPN 40 Amp - 01 Nos (c) MCB SP 6 Amp to 32 Amp - 4 Nos
Supply, Laying, Connecting and testing cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured heavy duty electric cable 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2 core laid in trenches/on wall/floor complete all as specified and as directed by Engr-in-Charge.
S & F HDPE (DWC) duct pipe 50 mm outer dia confirming to IS: 14930 (Part-II) of approved colour with all accessories, bends, joints, nuts, bolts, clamps etc fittings for cable protection complete all as specified and directed.
Sagar Builders
R B TRADERS
Vishal Builder
R. P. Suppliers and Construction Co.
NAVREET CONSTRUCTION
B S Ranbir and Co
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .