Construction of Yoga, Multi Gym and Meditation Center, uttar Dulalpur Yuba Sangha, Purba Midnapore, West Bengal

levelling, dresing and ramming the botom, bailing out water as required

complete. (Depth of exeavation additional depth upto 1500mm but not

recuring shoring).

Earthwork in filling in foundation trenches or plinth with good earth in

layers not execeding 150mm including wartering & rumming etc. layer by

layer complete (with earth obtained from excavation of foundation,

Fondation : - 2/3 of the excavation of foundation trenches

Single brick flat soling of picked jhama bricks including ramming, dressing

bed to proper level and filling joints with powdered earth.

Filling in foundation of plinth by Fine sand in layers not execcding 150 mm

as directed and consolidating the same by through saturation with water

4 ramming complete including the cost of supply of sand. Cum 21.56 543.51 11719.43

Supplying and laying ploythene sheet ( 150 grm /M2) over damp proof

5 course of below flooring or roof terracing or in foundation or in foundation Sqm 148.81 24.00 3571.50

Ordinary cement conc (mix 1:3:6) with graded stonechips (30mm nominal

6 size) excluding shuttering & reinforcement if any ground floor as per Cum 2.03 5198.00 10525.95

relevant IS Code with local hard black stone.

250 mm thick brick work with 1st class bricks in cement mortar (1:6) in

(a) Foundation & plinth.

250 mm thick brick work with 1st class bricks in cement mortar (1:4) in

(b) In superstructure, ground floor

125mm thick brick work with 1st class bricks in cement mortar (1:4) in

Ordinary cement conc. (mix 1:1:5:3) with graded stonechips (20mm

10 nominal size) excluding shuttering and reinforcement if any in G.F. as per Cum 41.23 6130.76 252769.35

relevent IS Code (Pakur)

Reinforcement for reinforced conc. works in all sorts of structures

including distribution bars, stirrups, binders etc. initial straightening and

removal of loose rust, cutting to requisite length, hooking and bending to

correct shape, placeing in proper position and binding with 16 gause black

annealed wire at every interseetion complete as per drawing & direction

(i)TATA (ii)RINL (iii)SAIL

Hire and labour charges for shuttering with centering and necessary

steaging upto 4m using approved stout props and thich hard wood plank

of approved thickness, with required bracing for conc, slabs, beams,

columns, lintels, curved or straight including fitting, fixing and striking out

after completion of works (25mm to 30 mm thick wooden shuttering as

per decission & direction of E.I.C.)

13 25mm to 30mm shuttering without staging in foundation. Cum 64.16 205.00 13152.03

Digitally signed by SILKI

Wood work in door & window frame fitted and fixed in position complete

14 including a protective cot of painting at the contact surface of the frame Cum 0.35 36302.00 12633.10

excluding cost of concrete, iron butt hings & MS Clamps (Neem)

Panel shutter of door & window as per design (each panel consisting of

single plan without joint) including fitting fixing in same in position but

excluding the cost of hinges & other fittings

(35 mm thick shutter with 19mm thick panel of size 30 to 45 cm ) (Neem)

Iron hasp bolt of approved quality fitted and fixed complete (oxidised)

16 with 16mm dia rod with centre bolt and round fitting (250mm long) D = 3 nos 3.00 166.00 498.00

Iron socket bolt of approved quality fitted and fixed complete.

17 W = 75mm long x 10mm dia bolt = 8Nos

D = 150mm long x 10mm dia bolt = 3 Nos nos 3.00 63.00 189.00

Supplying fitting and fixing MS clamp for door & window frame made of

flat bent bar, end byfarcated with necessary screws etc by cement concrete

(1:2:4) as per direction for , W= 40mm x 6mm x 200mm length =32Nos nos 32.00 86.47 2767.04

D =40mm x 6mm x 250 mm length =24Nos nos 24.00 86.47 2075.28

Iron butt hinges of approved quality fitted and fixed complete with steel

W = 75mm x47 mm x 1.70 = 64 Nos

Supplying fitting, fixing hinge cleat in position excluding the cost of hinge &

20 other fittings with 50mm Iron But hinge. nos 20.00 31.00 620.00

Sal/Siliguri : 20 Nos

Iron door ring of approved quality fitted and fixed with nut and washer

50mm dia = 16 Nos

M.S. round or square bar grating of windows etc. fitted and fixed in holes of

window frame and with intermediate flat bar stiffener complete, as

directed (16 mm dia).

@ 1.58 Kg/Mtr. = Kg

Plastering (to wall, floor etc.) with sand and cement mortar including

rounding off or chamfering corness as directed and raking out joints

including throating noising and drip course, scaffolding /staging where

necessary. (i) with (1:4) cement mortar 10 mm thick plaster

(ii) with (1:6) cement mortar 15 mm thick plaster Sqm 196.00 139.00 27244.00

(iii) with (1:6) cement mortar 20 mm thick plaster Sqm 126.39 159.00 20095.61

White washing including cleaning and smoothening surface thorughly (two

Priming one coat on timber or plastered surface with synthetic oil bound

primer of approved quality including smoothening surfaces by sand

(i) Timber Surface = 34.80 Sqm.

(ii) Plastered Surface = 576.89 Sqm. Sqm 576.89 38.00 21921.77

Painting with best quality synthetic enamel paint of approved make and

brand including smoothening surface by sand papering etc. including

approved of putty etc.

(i) On timber or plastered surface (with super gloss, higloss) (Two coats)

Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in

floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of

Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before

27 placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with Sqm 97.88 1675.00 163944.81

necessary pigments including grinding and Granite polishing as per

direction of Engineering -in -Charge in Ground Floor. {White cement and

Pigment to be supplied by the Agency]

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor

Digitally signed by SILKI

250 mm thick brick work with 1st class bricks in cement mortar (1:4) in

(b) In superstructure, ground floor

125mm thick brick work with 1st class bricks in cement mortar (1:4) in

Ordinary cement conc. (mix 1:1:5:3) with graded stonechips (20mm

31 nominal size) excluding shuttering and reinforcement if any in G.F. as per Cum 28.15 6130.76 172579.06

relevent IS Code (Pakur)

Reinforcement for reinforced conc. works in all sorts of structures

including distribution bars, stirrups, binders etc. initial straightening and

removal of loose rust, cutting to requisite length, hooking and bending to

correct shape, placeing in proper position and binding with 16 gause black

annealed wire at every interseetion complete as per drawing & direction

(i)TATA (ii)RINL (iii)SAIL

Hire and labour charges for shuttering with centering and necessary

steaging upto 4m using approved stout props and thich hard wood plank

of approved thickness, with required bracing for conc, slabs, beams,

33 columns, lintels, curved or straight including fitting, fixing and striking out Sqm 205.34 324.00 66530.97

after completion of works (25mm to 30 mm thick wooden shuttering as

per decission & direction of E.I.C.)

Wood work in door & window frame fitted and fixed in position complete

including a protective cot of painting at the contact surface of the frame

34 excluding cost of concrete, iron butt hings & MS Clamps (Sishu) Cum 0.35 36302.00 12633.10

Panel shutter of door & window as per design (each panel consisting of

single plan without joint) including fitting fixing in same in position but

35 excluding the cost of hinges & other fittings SQM 14.50 1601.00 23214.50

(35 mm thick shutter with 19mm thick panel of size 30 to 45 cm ) (Sishu)

Iron hasp bolt of approved quality fitted and fixed complete (oxidised)

36 with 16mm dia rod with centre bolt and round fitting (250mm long) D = 3 nos 3.00 166.00 498.00

Iron socket bolt of approved quality fitted and fixed complete.

37 W = 75mm long x 10mm dia bolt = 8Nos nos 8.00 34.00 272.00

D = 150mm long x 10mm dia bolt = 3Nos nos 3.00 63.00 189.00

Supplying fitting and fixing MS clamp for door & window frame made of

flat bent bar, end byfarcated with necessary screws etc by cement concrete

38 (1:2:4) as per direction for , W= 40mm x 6mm x 200mm length =32Nos nos 32.00 86.47 2767.04

D =40mm x 6mm x 250 mm length =24Nos nos 24.00 86.47 2075.28

Iron butt hinges of approved quality fitted and fixed complete with steel

W = 75mm x47 mm x 1.70 = 64 Nos

Supplying fitting, fixing hinge cleat in position excluding the cost of hinge &

40 other fittings with 50mm Iron But hinge. nos 20.00 31.00 620.00

Sal/Siliguri : 20 Nos

Iron door ring of approved quality fitted and fixed with nut and washer

50mm dia = 16 Nos

M.S. round or square bar grating of windows etc. fitted and fixed in holes of

window frame and with intermediate flat bar stiffener complete, as

directed (16 mm dia).

@ 1.58 Kg/Mtr. = Kg

Plastering (to wall, floor etc.) with sand and cement mortar including

rounding off or chamfering corness as directed and raking out joints

including throating noising and drip course, scaffolding /staging where

necessary. (i) with (1:4) cement mortar 10 mm thick plaster

(ii) with (1:6) cement mortar 15 mm thick plaster Sqm 196.00 139.00 27244.00

(iii) with (1:6) cement mortar 20 mm thick plaster Sqm 126.39 159.00 20095.61

White washing including cleaning and smoothening surface thorughly (two

Digitally signed by SILKI

Priming one coat on timber or plastered surface with synthetic oil bound

primer of approved quality including smoothening surfaces by sand

(i) Timber Surface = 34.80 Sqm.

(ii) Plastered Surface = 576.89 Sqm. Sqm 576.89 38.00 21921.77

Painting with best quality synthetic enamel paint of approved make and

brand including smoothening surface by sand papering etc. including

approved of putty etc.

(i) On timber or plastered surface (with super gloss, higloss) (Two coats)

Artificial stone in floor, dado, staircase etc with cement concrete (

1:2:4) with stone chips, laid in panels as directed with topping

made with ordianry or white cement and marble dust in proportion

47 (1:2) including smooth finishing and rounding off corners including Sqm 89.94 265.00 23832.78

raking out joints or roughening of concrete surface and application

cement slurry before flooring works using cement @ 1.75 kg/Sqm

all complete including all materials and labour (35mm thick)

Neat cement punning about 1.5mm thick in wall, dado, window sill,

Total A 2077400.39

Add: 5% Electrifcation (5% on A) B 103870.02

Add: 7% Sanitory Works (7% on A) C 145418.03

Sub Total (A+B+C) D 2326688.43

Add: Labour Welfare Cess ( 1% on D) E 23266.88

Add: Contingency (2% on D) F 46533.77

Grand Total (D+E+F) 2396490.00

Grand Total (D+E+F) 2396490.00

(Rupees Twenty Three Lakhs Ninety Six Thousand Four Hundred Ninety only) incl GST

Digitally signed by SILKI