8422/GE/PAF-43/2023-24

Amount

Dismantling plain corrugated asbestos /translucent sheet in roof covering including redges complete all as specified and directed by Engr-in-charge.

Supply and Fixing 0.63mm thick galvanised, corrugated mild steel sheeting with two corrrugations side lap, fixed with coach screws and washers, in roofs, wall etc. with grade of zinc coating 275 complete all as specified and directed by Engr-in-charge.

Supply and Fixing 0.63mm thick galvanised, plain mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed by Engr-in-charge.

Material and Labour for preparation of new steel and iron surfaces of any description over 10 Cm width or girth not otherwise described and applying two coats of synthetic enamel paint (camouflaged pattern) over a coat of red oxide primer over a coat of moderant solution to remove zinc coating complete all as specified and directed by Engineer-in-Charge

Dismantling of wall or ceiling boards (fibre,pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness including cover fillets complete all as specified and directed by Engr-in-charge.

Providing & fixing false ceiling at all heights with GRS (Glass Fiber Reinforced Gypsum) false ceiling tile of size 595X595 mm of approved texture ,design and pattern having moisture content less then 2 %, humidity resistance of 99%,NRCO .50 to 0.75 as per IS 8225 :1987, Noncmbustiible as per IS 476 (part 4)-1970 and light reflectance of 855 (minimum) to be laid in true horizontal level suspended on interlocking metel T grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @120 gms per sqm including both side) comprising of main T runners of size 15X32 mm length 3000mm ,cross T of size 15X32 mm of length 600mm to from grid module of size 600mm X600mm suspended from Ceiling using galvanised mild steel items (galvanizing @ 80 gms per sqm) i e 50mm long ,8mm outer dia M-6 hanger rod upto 1000mm length and L shape level adjuster of size 85X25X2mm galvanised iron perimeter wall angle of size 24X24X0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plug at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications ,drawing and as per direction of the Engr- in Charge.

Taking down chowkats or frames incl shutter exc 1.50 Sqm but nexc 4.00Sqm complete all as specified and directed by Engr-in-charge.

Supply and Fixing Solid PVC Door Frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, suppling & Fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-charge.

Supply and Fixing Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC Sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing complete all as specified and directed by Engr-in-charge.

Supply and Fixing 100 mm butt hinges, heavy weight, cold rolled mild steel and fixed complete all as specified by Engr-in-charge.

Supply and Fixing 150 mm size aluminium handles, cast type,anodised complete all as specified by Engr-in-charge.

Supply and Fixing 150 mm aluminium anodised barrel tower bolts extruded section fixed complete all as specified by Engr-in-charge.

Material and Labour for hacking out old broken glass (any thickness, size , quality or description) from wooden frame or stone ,concrete or brick surrounds,glazed with putty or fixed with beads complete all as specified and directed by Engr-in-charge.

Supply & fixing tinted glass ordinary quality 5.5mm thick n, exc 0.5 sqm in each pane complete all as specified and directed by Engr-in-charge.

Demolition of brick work built in CM including all quoins arches pillars, etc complete all as specified and directed by Engr-in-charge.

Material and Labour brick work with sub class 'B' bricks in CM 1:6, straight or curved on plan exc 6 mtr nean radius, using old size bricks complete all as specified and directed by Engr-in-charge.

Taking down cement plaster on brick wall upto any height(max of triple storey) and ceilings including raking out joints hacking for key srcubbing down with water complete all as specified and directed by Engr-in-charge.

Material and Labour for rendering 15 mm thick on fair faces of brickwork or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and Labour 15mm thick rendering in cement mortar 1:6 on fair faces of brick work surace rendering is to be even and smooth with out using extra cenent complete all as specified and directed by Engr-in-charge.

Material and Labour for preparation of new plastered surfaces and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/lit and UV resistance as per IS 15879;2004, Alkali and fungal resistance , dirt resistance exterior paint of requirede shade (Company Depot Tinted) with silicon additives @1.43lit/10sqm over and including priming coat of exterior primer [email protected]/10sqm over new surfaces complete all as specified and directed by Engr-in-charge.

Material and Labour for preparation of old plastered surfaces and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/lit and UV resistance as perIS 15489:2004, Alkali and funggal resistance , dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applieed @0.90litre/10sqm over new surfaces in camouflaged pattern complete all as specified and directed by Engr-in-charge.

Material and Labour for Preparation new surfaces of walls and applying two coats of oil emulsion distemper over a coat of 3 mm thick wall putty complete all as specified and directed by Engr-in-charge.

Demolition of cement Concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) or as in sunken complete all as specified and directed by Engr-in-charge.

Material and Labour for 40mm thick PCC(1:2:4) type B-1 using 20mm graded crushed stone aggregate) as in floors complete all as specified and directed by Engr-in-charge.

Dismantling floor hearth wall tiling (but not backing) removing servicable tiles to store rubbish off the premisses complete all as specified and directed by Engr-in-charge.

Material and Labour 15mm thick screed bed or bedding layer of cement mortar 1:4 to laying floor finish complete all as specified and directed by Engr-in-charge.

Material and Labour non skid ceramic colour tiles 7 to 8 mm thick joint free edge cut (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm(300mmx300mmx7 mm thick) set and jointed in neat cement slurry and pointed in colour cement to match as in floor complete all as specified and directed by Engr-in-charge.

Material and Labour glazed ceramic colour tiles 300mmx450mm300mm x200mm x7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado over cement mortar rendering/screding 10mm thick 1:4 complete all as specified and directed by Engr-in-charge.

Supply and Fixing in repair vitreous china ware wash hand basin white flat back size 550mm x 400mm excl taps, waste chain and plug and porecelain stopper but incl bracket and cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed by Engr-in-charge.

Supply and Fixing in repairs vitreous china wash down water closet (Pedested patern ) white incl fixing bolt, plastic water closet seat cover black/white closed pattern with flat bottom and cover and mild steel chromimum plated hinging device, fixed in repairs all as specified directed by Engr-in-Charge.

Supply and Fixing in repair Hot and cold mixer fancy type single or double legged cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends iron pipe suitable for 15mm bore pipe fixed to wash hand basin complete all as specified and directed by Engr-in-charge.

Supply and Fixing Viterous china urinal flat back, size of 465x355x265mm white with grating and union for discharge p[ipe incl flush pipe grating and waste pipe complete all as specified and directed by Engr-in-charge.

Supply and Fixing in repair PVC connection, 60cm long, 15mm in size with PTMT nust and PVC washers at both ends complete all as specified and directed by Engr-in-charge.

Supply and Fixing in repair 15mm Angle/stop/gate valves, fancy type chromium plated, screwed down, high pressure with crutch or butter fly handle screwed at two right angles ends for both iron pipe complete all as specified and directed by Engr-in-charge.

Supply and Fixing in repair stop/gate valve,15 mm cast copper alloy chromium plated fancy type with long shank & cup (concealed type) with capstan heads, screwed down, high pressure, with crutch or butterfly handle screwed for 15mm bore iron fixed complete all as specified and directed by Engr-in-charge.

Supply and Fixing in repair stop/gate valve,20 mm cast copper alloy chromium plated fancy type with long shank & cup (concealed type) with capstan heads, screwed down, high pressure, with crutch or butterfly handle screwed for 15mm bore iron fixed complete all as specified and directed by Engr-in-charge.

Supply and Fixing in repair Bib taps cast copper alloy chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15mm bore, complete all as specified and directed.

Supply and Fixing in repair PVC white low level flushing cistem 10ltrs capacity with all fittings syphonic action push stype with inlet ball valve and float incl PVC flush pipe, ball valve, handle, MS bracket etc complete all as specified and directed by Engr-in-charge.

Supply and Fixing in repair brass chhromium plated tubular tower rail 20mm dia , D type, 60cm long between flanges complete all as specified and directed by Engr-in-charge.

Taking down steel water tubing and connections, cleaning and refixing old 15 mm bore steel tubing and connections in new or old position with walls , ceiling, floors , complete all as specified and directed by Engr-in-charge.

Taking down steel water tubing and connections, cleaning and refixing old 20 mm bore steel tubing and connections in new or old position with walls , ceiling, floors , complete all as specified and directed by Engr-in-charge.

Taking down steel water tubing and connections, cleaning and refixing old 25 mm bore steel tubing and connections in new or old position with walls , ceiling, floors , complete all as specified and directed by Engr-in-charge.

Taking down steel water tubing and connections, cleaning and refixing old 50 mm bore steel tubing and connections in new or old position with walls , ceiling, floors , complete all as specified and directed by Engr-in-charge.

Supply and Fixing medium grade steel water tubing, 15 mm bore galvanised (including taking down) with all fittings such as Union , Tank nipple with tank fittings and socket, elbow, nipple etc. and fixed complete to walls or laid in floors complete all as specified and directed by Engr-in-charge.

Supply and Fixing medium grade steel water tubing, 20 mm bore galvanised (including taking down) with all fittings such as Union , Tank nipple with tank fittings and socket, elbow, nipple etc. and fixed complete to walls or layed in floors complete all as specified and directed by Engr-in-charge.

Supply and Fixing medium grade steel water tubing, 25 mm bore galvanised (including taking down) with all fittings such as Union , Tank nipple with tank fittings and socket, elbow, nipple etc. and fixed complete to walls or layed in floors complete all as specified and directed by Engr-in-charge.

Supply and Fixing medium grade steel water tubing, 50 mm bore galvanised (including taking down) with all fittings such as Union , Tank nipple with tank fittings and socket, elbow, nipple etc. and fixed complete to walls or layed in floors complete all as specified and directed by Engr-in-charge.

Cutting chases in brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed by Engr-in-charge.

Dismantling of cast iron work of any description complete all as specified and directed by Engr-in-charge.

Supply and Fixing 110mm bore PVC (SWR), branch piece Single T complete all as specified and directed by Engr-in-charge.

Supply and Fixing 75mm bore PVC (SWR), branch piece Single T complete all as specified and directed by Engr-in-charge.

Supply and Fixing 110mm PVC cowl complete all as specified and directed by Engr-in-charge.

Supply and Fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed by Engr-in-charge.

Supply and Fixing 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed by Engr-in-charge.

Supply and Fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed by Engr-in-charge.

Supply and Fixing 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed by Engr-in-charge.

Supply and Fixing 75 mm PVC SWR bend complete all as specified and directed by Engr-in-charge.

Supply and Fixing 75 mm PVC SWR complete all as specified and directed by Engr-in-charge.

Material and Labour PVC floor trap with grating, including jointing to waste pipe, fixed with solvent cement, dia of out let 75mm complete all as specified and directed by Engr-in-charge.

Material and Labour for cement concrete (1:3:6) type C-2 to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150 mm dia bore of pipe complete all as specified and directed by Engineer-in-Charge.

Demolition and breaking up 200mm drain pipes Salt glazedware, AC or reinforced cement concrtete set in cement mortar complete all as specified and directed by Engr-in-charge.

Supply and Fixing 200mm dia reinforced conc pipe class NP-2 laid and jointed in trenches complete with collars all as specified and directed by Engineer-in-Charge.

Demolition of reinforced cement concrete n.exc 15 cm thickness complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Pre-cast reinforced cement conc. 1:2:4 type B-1 using 20mm graded crushed stone aggregate in cover slab and the likes and set in cement mortar 1:4 complete including necessary form work and demolition of existing cover slabs reinforcement cut as required to facilitate demolition complete all as specified and directed by Engineer-in-Charge.

Dismantling boarding any description, fixed in any position with nails complete all as specified and directed by Engr-in-charge.

Dismantling timber scantling 40 sqcm and over in section in any position complete all as specified and directed by Engr-in-charge.

Material and Labour 15mm thick screed bed or bedding layer of cement mortar 1:6 to laying floor finish complete all as specified and directed by Engr-in-charge.

Material and Labour non skid ceramic tiles light shade 7 to 08 mm thick (square/rectangular)polished area of each tiles exc o.18 but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in colour cement to match complete all as specified and directed by Engr-in-charge.

All as per ser item No 69 above but in skirting and dado including rendering/screeding including cement mortar 1:4 , 10mm thick complete all as specified and directed by Engr-in-charge.

Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runnes, brass handles etc as specified, erected in position and securing runners with holdfasts and brackets,complete all as specified and directed by Engr-in-Charge.

Material and Labour for powder coated aluminium frame for doors, windows, partitions, ventilators with one o more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-Charge.

Supply and Fixing for powder coating aluminium door shutters, aluminium section weighing not less than 0.55kg/m glazed with glass including necessary joining cleats, glazing clips, ruber neoprence packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed by Engr-in-Charge.

Material and Labour Machnine cut kota stone slab flooring 20-25mm thick over 20mm cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge.

Material and Labour Machnine cut kota stone slab flooring 20-25mm thick skirting over 20mm cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge.

Cutting chases in stone wall, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for conceaied water tubing or conncealed conduit wiring, etc and making good, cutting not exc 10cm girth complete all as specified and directed by Engr-in-Charge.

Material and Labour for hard core of brick bats of guage n.exc 63mm, deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified and directed by Engr-in-charge.

Taking down old unserviceable/deteriorated batten/PVC/old rusted steel conduit point wiring from existing place i.e. light, fan, socket or power points complete with all unserviceable fittings such as switches, sockets, ceiling rose, pendants, Holders, etc and making good all disturbed surface to wall, floor etc by means of cement mortar (1:3) or plaster of Paris and to match / finish new surface as the existing surface either by using same colour distemper, Putti or white / colour wash all as required and directed by Engineer-in-Charge.

Taking down main switch/DB/ changeover/AC box of any capacity including fixing accessories of single/three phase complete all as specified and directed by Engineer-in-Charge.

Concealed point wiring on wall and surface on ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 19 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and bakelite laminated sheet 3mm thick ISI marked for fixing of switches / sockets, fan regulators, wall mounting fittings, door bell & bulkhead/telephone socket etc with MS screw and cup washers including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge for the following:- (a) One light, fan, bell point controlled by one switch all as specified and directed by Engineer-in-Charge for the following.

(b) One 5 Amp socket point controlled by one switch on same board complete all as specified and directed by Engineer-in-Charge.

(c) 5 Amp independent socket point controlled by one switch complete all as specified and directed by Engineer-in-Charge.

All as per item No 80 here-in-before but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 1.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead complete all as specified and directed by Engineer-in-Charge.

Supply and Finxing in modular switch single pole one way 5/6 Amps, 240 volts, white finish, ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in modular Switch single pole one way 16/20 Amps, 240 volts, white finish, ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in modular Socket outlet 5 pin, 5 Amps, 240 volts white finish, ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in modular Socket outlet 2 in 1, 3 pin, 5 &15 A, 240 volts white finish, ISI Marked complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in modular metal flush box 1/2 module with all fittings duly grouted in wall complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in modular metal flush box 3 module with all fittings duly grouted in wall complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in modular metal flush box 4 module with all fittings duly grouted in wall complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in modular metal flush box 6 module with all fittings duly grouted in wall complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in modular white cover plate with frame 1/2 module complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Modular white cover plate with frame 3 module complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Modular white cover plate with frame 4 module complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Modular white cover plate with frame 6 module complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Ceiling rose, surface backlite, 65 x 20 mm 3three terminal ISI Marked complete all as specified and directed by Engineer-in-Charge.

Sheet metal enclosure VTPN MCCB DB 4way, 415 V (vertical type) with bus bar double door type IP 43 - IK 09 as per IEC 61439-3 suitable for flush mounting complete with 200 A copper bus bar for each phase with 2 neutral and 2 earth bus bars with cable ties for cable management for DB's when MCBs & MCCB 100 Amps (as incomer) to be used, fixed properly in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs for cables/wires complete all as specified and directed by Engineer-in-Charge.

Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 12 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified and directed by Engineer-in-Charge.

Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wirescomplete all as specified and directed by Engineer-in-Charge.

Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified and directed by Engineer-in-Charge.

All as per item srl No 98 but TP 40-63 A 415 volts complete all as specified and directed by Engineer-in-Charge.

All as per item srl No 98 but TPN 40-63 Amps, 415 volts complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repalcement MCB SP 240 volt 6 Amp to 32 amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed by Engineer-in-Charge.

All as per item srl No 101 but SPN 16-32 Amps complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing for MCCB 100 Amps, 3 Pole, 415V, 16 KA thermal magnetic adjustable type with short circuit and overload protection complete all as specified and directed by Engr-in-charge.

Sheet metal enclosure, 32A single pole and neutral with a two pin and earth plug and socket complete in metal clad board (Industrial type) with one single pole MCB 32 Amp fixed properly complete all as directed by Engr-in-Charge.

Sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 10 sqmm drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 19 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc laid in concealed position with 6 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge.

Sub main wiring with four single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 6 sqmm drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 20/25 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc laid in concealed/surface position with 4 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge.

Supply and Fixing Decorative ultra slim linear LED lighting fixtures with extruded polycorbonate environmental friendly energy saver LED light fitting 1x16/20/22 watt (4'), 230 Volts, single tube mounting including LED Tube 20/22 Watt, AC decorative type complete with electronic driver spring loaded rotory type lamp holder, end cover, connector box etc and accessories, prewired, LED including required fixing arrangements and electrical connection with three core copper cable from ceiling rose to led light fitting complete all as specified and directed by Engineer-in-Charge.

All as per item ser item No 107 here-in-before but 1x10/12 Watt (2') mirror type with high output diffuse complete all as specified and directed by Engineer-in-Charge.

S&F Decorative LED Surface mounted spotlight in matt finish for premium aesthetics of 7 W LED 6500K, 230 Volts, complete incl electrical connection with three core copper cable from ceiling rose to LED light fitting complete all as specified and directed by Engineer-in-Charge.

Supply and fixing building security light fitting new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 of 35watt LED, 240 Volts incl bracket made out of GI pipe 25mm dia medium grade, 0.9 mtr long bent to shape with welded MS flat 25 x 6 mm for mounting of fitting & MS flat iron clamps made out of 25mmX 6mm thick FI nuts, bolts complete all as specified and directed by the Engr-in-charge.

Supply, fixing, installation and testing of ISI marked, energy efficient, water heater storage type made of ultra-thick super cold rolled steel plates, incoloy glass-coated heating element offering superior heating performance, electrically operated, single phase, 50 Hz (BEE 5 star rating), complete of 25 Ltr capacity suitable to withstand 8 bar pressure with whirlflow technology and adjustable knob for convenient setting of temperature with and including supply and fixing, wire armoured 450 mm long, 15 mm dia brass coupler etc, flexible pipe suitable to withstand upto 100 degree celcius for hot and cold water, anchor fastner - 04 Nos of suitable size , 3 core PVC insulated, FRLS multistranded copper conductor cable and plug top 15 Amps capacity complete in all respect all as specified and directed by Engr-in-Charge. Note : Old unserviceable geyser is to be deposited to MES store yard.

Supply and fix exhaust fan AC single phase 230/240 V of size 250/300 mm sweep, 1200 RPM made of sturdy engineering plastic with louver & shutter and copper winding including connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core and grouting on wall complete and making good the wall surface after fixing of exhaust fan complete all as specified and directed by the Engr-in-charge.

Material and Labour for earthing complete with M.S. galvanized earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below normal GL) with top edge of the earth plate not less than 1.5M below normal GL, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel incl excavation, PCC (1:3:6) type C-1 chamber with RCC cover (1:2:4) type B0, 40 mm thick reinforced with 6 mm dia bar, 3 Nos. both way, 15 mm dia light grade GI protection pipe, funnel with wire mesh,watering pipe of size 20 mm dia med. grade, lugs, main Earthing lead upto 7.5 mtr incl. Charcoal dust, salt etc. all as shown in electrical plate No. 3 of SSR Part-I, 2009 specification. Note : Result of the earthing should be less then 4 ohms if not achieved the new earthing to be carried out without any extra costcomplete all as specified and directed by Engr-in-charge.

Supply and Fixing copper strip 20x3mm complete with saddles/ insulators made out of PVC or fibre and fixing screws for roof conductor/down conductor including welding or brazing for joints all as required at site or as directed by Engr-In-Charge.

Supply and Fixing GI tubing light grade 50 mm dia, cut to size and bent to shape all as required at site including fixing arrangement with necessary clamps of required size at site and providing appropriate size of insulators to pipe from foundation of air termination rod complete all as specified and directed by Engr-in-charge.

Material and Labour for air termination single pointed copper rod 12mm dia and 300mm long complete all as specified and directed by Engr-in-charge.

Material and Labour for test point terminal block made of gun metal or phosphorus bronze of size 75X75X6mm drilled and screwed including 03 Nos 8mm dia 25mm long hexagonal head screw complete all as specified and directed by Engr-in-charge.

Earthing complete with copper earth plate electrode 600x600x3.15 mm thick buried directly in ground (Earth pit not less than 2.25 Mtr deep below normal ground level ) with top edge of earth plate not less than 1.5 Mtr below normal ground level connected to copper strip 20X3 mm as earth lead by means of bolts, nuts washers and check nuts of steel/GI duly protected with 40 mm bore light grade pipe upto main board , 20mm bore watering pipe light grade with CI/MS funnel and wire mesh including excavation , earth work in any type of soil and removing the surplus soil to a distance not exceeding 50 Mtr, add charcoal dust and common salt after mixing with BFC (Back Fill Compound) inadeqate quantity as recommended by the manufacturer or as diirectred by the Engr-in-charge all as shown in electrical plate No. 03 of SSR part-I 2009 having pit in PCC 1:2:4 type B-1 including angle iron frame made of angle iron of size 40x40x6mm grouted in PCC pit for CI cover of required size, funnel with wire mesh complete and all as specified and as directed by Engr-in-charge.

Supply and fix Gun metal globe or gate valve iron wheel head, screwed both ends for iron pipe of bore of 50 mm and length as required on site or directed by engineer-in-charge.

Supply and fix Gun metal globe or gate valve iron wheel head, screwed both ends for iron pipe of bore of 25 mm and length as required on site or directed by engineer-in-charge.

Excavation in trenches in any type of soil, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation, laying of cables and getting out complete all as specified & as directed by Engineer-in-charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm each layercomplete and all as specified and as directed by Engr-in-charge.

Removing excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete and all as specified and as directed by Engr-in-charge.

Supply, laying testing and connecting 25 Sqmm 4 Core XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electrical cable with aluminium conductor, 1100 volts grade laid in trenches/ducts/wall or through pipe with suitable size of cable glands, crimping type cable lugs complete all as specified and directed by Engr-in-Charge.

All as per item Srl No 124 here-in-before but of size 35 sqmm 3.5 core complete all as specified and directed by Engr-in-Charge.

All as per item Srl No 124 here-in-before but of size 70 sqmm 3.5 core complete all as specified and directed by Engr-in-Charge.

Sand cushioning to under ground cable 8 cm thick layer below the cable and 15cm thick above the cable complete and complete all as specified and directed by Engr-in-Charge.

Brick protection with well burnt sub class ‘B’ brick a butting each other( width wise) across the cable laid in trenches complete all as specified and directed by Engr-in-Charge.

Fabrication, installation and testing of Feeder Pillar KIOSK type floor mounted dust/vermin proof indoor type of size 1.2x1.5x0.6 mtr, CPRI approved factory fabricated made out of MS sheet of thickness 3.15 mm mounted on angle iron legs made out of angle iron of size 40x40x6 mm with front & rear opening with locking arrangement, containing bus bar chamber to accommodate 3 phase & 1 neutral copper busbar of size 40x10 mm fixed on epoxy based insulators in horizontal position in upper part of panel separate chambers for 01 No. incomming MCCB and 03 Nos. outgoing MCCB connected to busbar by copper strip of size 20x5 mm duly drilled hole for cable connectioin and powder coated with 7 tank process all as required at site or as directed by Engr-in-charge (including the PCC foudation of panel) complete including of following :- (a) MCCB 160 Amps FP 25KA (thermal, adjustable type, O/L & S/C Protection) - 01 No (I/C). (b) MCCB 100 Amps 3P 25 KA -02 Nos (O/G) (c) MCCB 63 Amps 3P 25 KA -02 Nos (O/G) (d) Digital Multi-function meter with CT's of required cap – 01 No. (e) LED type Indicator lamps (R, Y. B) – 01 Set. All accessories pre wired with suitable size copper conductor cable including making necessary arrangements for fixingcomplete all as specified and directed by Engr-in-Charge. NOTE : 1) All connections to be done with proper size copper / Brass Thimbels. ( 2) Control circuit wiring to be done with S/C copper wire complete all as specified and directed by Engr-in-Charge.

M/s Northern India Construction co

m/S Varun Gupta

Roshan Lal Thakur

Havish Construction