Development of Matoor Aqueduct with various tourist amenities in Kanyakumari District

Amount

Civil Work

Removal of existing Light jungle and clearing site for construction work and clearing area as directed by officers as standard specification

Removal of existing Heavy jungle and clearing site for construction work and clearing area as directed by officers(Leisure Area Stone Seating) as standard specification

Dismantling Brick / Stone Masonry in cement mortar walls under 3m high as standard specification

Dismantling Brick Masonry 1: 3 in cement mortar walls under 3m high as standard specification.

Dismantling Stone Masonry in cement mortar walls under 3m high as standard specification.

Removal of existing R.C.C of kiosk structures for footing excavation work with suitable types of machinery and labours and dumping the waste at sides as directed by the departmental officers . as standard specification

Removal of existing P.C.C pavement for footing excavation work with suitable types of machinery and labours and dumping the waste at sides as directed by the departmental officers. as standard specification

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Supplying and filling of Gravel in basement filling including conveyance loading and unloading charges and all other incidential charges filling laying watering and consolidation etc., complete as directed by the Dept., Officers with standard specification.

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid) and Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)

Providing additional strutting to centering of RCC slabs plain surface for every additional 1.00 m height or part thereof but not less than 30cm, over the initial 3.00 m height from floor level using casurina props of 10cm to 13cm dia. Including cross bracing etc., complete complying with standard specification and as directed by the department officers.

Providing and laying in position, for Plain Cement Concrete 1:5:10 (One Cement, Five Manufactured sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification

Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 360 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).

Foundation and Basement

Super Structure Ground Floor up to 4.50m

Super Structure First Floor

Supplying, fabricating and placing in position TMT Steel rods for all RCC works as per design given including cost of steel , cover block and G.I. binding wire in all floors etc. complete complying with standard specification (Contractor has to make his own arrangements for the supply of steel ,cover blockand binding wire)

Providing and laying in position, Roandom Rubble Masonry Work using 1:5 Cement Mortar using best quality of Hard Random Rubble masonry stones for foundation and basement including curing, etc.,including and material in all respect, complete complying with standard specifiction.

Foundation and Basement

Super Structure Ground Floor up to 4.50m

Super Structure First Floor

Providing and laying in position, Brick Work in Cement Mortor 1:5 Mix (one cement, Five sand) using new best Wire Cut Bricks for Heritage Works of size 9" x 4 "x 3" from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Super Structure Ground Floor up to 4.50m

Super Structure First Floor

Providing and laying in position, Brick Work in Cement Mortor 1:5 Mix (one cement, Five sand) using Second Class Table Moulded Chamber Burnt Bricks of size 9" x 4½"x3" from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Super Structure Ground Floor up to 4.50m

Super Structure First Floor

Plastering with cement mortar 1:5 (One cement, and five sand) 12mm thick including curing, cost and conveyance of all materials complying with standard specification

Special ceiling plastering for RCC works with CementMortar 1:3 (One cement, and three sand) 10mm thick including curing, cost and conveyance of all materials complying with Standard specification.

Plastering with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 20mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface ect., complete complying with standard specification.

Water repellent paint 3 coats over the Expoded brick work and exposed brick tile area Including cost of all materials to site and all labour charges for mixing applying etc., Complete as per Standard Specifications.

Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Providing and laying in position, Floor tiles with following best approved quality, Porcelain tiles set in Cement Mortar 1:3 (One Cement and Three plastering sand) 600mm x 600mm x 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. Size of tiles, colour and pattern as shown in the Architectural Drawing

Providing and laying in position, Dadooing walls with following best approved quality, Porcelain tiles set in Cement Mortar 1:3 (One Cement and Three plastering sand) 600mmx600mm x8 mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / m² neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Providing and laying in position, Finishing the floor with one course of Terracotta machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers.

Finishing the top of roof with one course of Solar Reflective tiles of size 305mm x 305mm x 7mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Manufactured Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers (Gents & Ladies Toilet Block)

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Doors and Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work.

Supplying and fixing Teak wood Doors and Windows fully panelled shutters for using Teakwood scantlings upto 4m length and teakwood 40mm thick for styles and rails and 22mm thick for planks and panels including cost of wind appliances and labour charges for fixing the furniture fittings in position but excluding cost of furniture fittings complete as directed by the Departmental officers.

Providing and laying in position, Cladding the Concrete columns with Brick tile of the best quality and approved variety complying/confirming ISI specification and over cement mortar 1:3 (one cement and three sand) 20mm thick and prompted with same colored cement neatly etc., complete

Providing and laying in position, Cladding the Brick Wall with Natural Stone Slab-Grey tone with various sizes as per Architectural Drawing (17mm Thick) of the best quality and approved variety complying/confirming ISI specification and over cement mortar 1:3 (one cement and three sand) 20mm thick and prompted with same colored cement neatly etc., complete

Supply and Fixing the arch top with stone letters as per design including material, labour, transport and erection at site, finishing as directed by departmental officers .

Supply and fixing of thermacol sheets of thickness 50mm as per design at the designated filling place as per structural drawings, including material, labor, transport and erection at site, finishing as directed by departmental officers.

Grinding in RCC Surface using Grinding machine.

Supply and fixing of terracotta manglore tile trapzoidal sloped roofing systems with sufficient MS hollow square/rectangle section with adequate Rafter and purlin 450mm x450mm C/C support sections as per design, including material, labour, transport in all respect and completing the work as directed by the departmental officers.

Supply and fixing Stone pillar of the best quality and approved variety complying/confirming ISI specification placed over specified R.C.C belt as per design including material and labour in all respect, completing work as directed by dept officers (Pergola,Railing)

Stone Posts for Pergolas

Stone Posts for Railing

Providing and laying in position, Stone Lintel 2150 x 230 x 115 mm with Natural Stones of the best quality and approved variety complying / confirming ISI specification land over cement mortar 1:3 (one cement and three sand) 20mm thick and prompted with same coloured cement neatly etc., complete

Providing and laying in position with 50mm Thick Natural Stones for Stone Seating of the best quality and approved variety complying / confirming ISI specification land over cement mortar 1:3 (one cement and three sand) 20mm thick and prompted with same coloured cement neatly etc., complete (Planter Box Stone Seating, Leisure Area Stone Seating)

Providing and laying in position, Paving the floor with Natural Stones of the best quality and approved variety complying / confirming ISI specification land over cement mortar 1:3 (one cement and three sand) 20mm thick and prompted with same coloured cement neatly etc., complete

Natural Stone Paving 01 Rough Finish size varies including labour charges

Cobble Stone Paving 02 size- 100 x 100 mm Grey colour including labour charges

Cobble Stone Paving 03 size- 100 x 100 mm Red colour including labour charges

Natural Stone Paving 04 Flame Finish 1000X300 mm

Providing and laying in position, Paving the Pathway Steps Stone of the best quality and approved variety complying / confirming ISI specification land over 10mm chips/cement mortar 1:3 (one cement and three sand) 150mm thick and prompted with same coloured cement neatly etc., complete (Leisure Area)

Manufacturing, Supplying and Fixing of Using Galvanized Steel (GI) Pipe Section 40x80x4mm with Black Matt Enamel Paint Finish. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, Painting, conveyance, electrical charges, etc. complete (Pergola)

Manufacturing, Supplying and Fixing of Mild Steel Railing with Dark Grey Enamel Paint Finish in Pathways, Amphitheatre and other areas as per drawing. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, Painting, conveyance, electrical charges, etc. complete (Railing)

Type 1 Path way Railing R10

Type 2 Railing R1 Railing R2 Railing R3 Railing R4 Railing R9a Railing R9b

Type 3 Railing R5a Railing R5b Railing R5c Railing R5d Railing R6a Railing R6b Railing R6c Railing R7

Type 4 Railing R8a Railing R8b

Manufacturing, Supplying and Fixing of Mild Steel Railing, Gate and Ladder. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, one coat primer and two coats Painting, conveyance, electrical charges, etc. complete

Wall Railing

Wall Gate

Water Tank Ladder

Supplying and Fixing of Way Finding Map Using Wooden Planks and MS Steel Sheets 3mm thick, Grinding, Polishing and Painting Complete (On Water Tank Brick Wall)

Manhole FRP Cover 600x600 mm

PVC anchor steps

Soak pit Cover Slab Ø 1.700 m rings

Soak Pit RCC Precast Ø 1.700 m rings (Outer Dimension)

Broken bricks / Jally Filling (Sizes Various - 20 to 40mm aprox.) in Ø1.500m precast rings

Supplying and filling in position Sweet Soil, Cow dung and Coco pit in Planter box areas (Planter Box Stone Seating) / (Leisure Softscape Area) (Entrance Curved Brick Show Wall Planter Box)

Supplying and filling in position Sweet Soil, Cow dung and Coco pit in Planter box areas (Planter Box Stone Seating) / (Leisure Softscape Area) (Entrance Curved Brick Show Wall Planter Box)

Supplying and filling in position 20mm or down sizes Gravel Filling Planter box bottom Layer (Planter Box Stone Seating)

Softscape - Plantation

Vernonia elaeagnifolia DC

Plantation Work Labour

Axonopus Compressus

Wodyetia Bifurcata

Phyllostachys aurea

Rhapis excelsa

Plumeria

Terminalia

Alpinia Purpurata

Pandanus Baptistii Variegata

Geoppertia makoyana

Hymenocallis Littoralis

Plantation Work Labour

Spathiphyllum

Hymenocallis Littoralis

Heliconia Pisttacorum Varigated

Heliconia Pisttacorum Red

Zinigiber Zerumbet

Dracaena Trifasciata

Hedera

Clitoria Ternatea

Passiflora Edulis

Plantation Work Labour

Axonopus compressus

Wodyetia bifurcata

Pongamia pinnata

Plumeria

Terminalia

Calophyllum Inophyllum

Vitex Negundo

Jacaranda

Hedychium Coronarium

Heliconia Pisttacorum Red

Alpinia Zerumbet

Pandanus baptisti variegata

Aglaonema Nitidum

Dwarf Canna lilly

Spathiphyllum

Lobster Heliconia

Bougainvillea

Plantation Work Labour

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

110 mm dia

160 mm dia

Cost shall be inclusive of excavation, dewatering, backfilling, ramming surrounding the pipe alround with minimum. 150 mm thick compacted silver sand and providing thrust block at distance 3 M C/C. (Pipe shall be provided with anti corrosive protective treatment as per BIS / manufacturer specifications). All work complete as per specification and satisfaction of the Project Manager.

Construction of Inspection chamber with 230mm best quality approved Table Moulded bricks in CM 1:4 over a bed of 100mm thick PCC 1:4:8, internal wall surfaces plastered in CM 1:3 and external wall surfaces with CM 1:3 with sponge finish, benching and channelling in PCC 1:4:8. Supplying and fixing precast RCC cover with frame of SFRC with frame and fixing PVC steps in position. The quoted rate shall also include necessary excavation and back filling. Clear internal size of the chamber 600 x 600mm maximum depth not exceeding750 mm.

600 x 600 mm clear opening (weight of precast concrete frame and cover heavy duty not less than 124 kgs)

Construction of gulley trap with RCC side walls as per structural details over a bed of 100mm thick PCC1:4:8, internal wall plastered in CM1:3 and external wall with CM 1:6 with sponge finish. Fixing of RCC covering slab with supply and fixing CI square tablemoulded bricks inCM 1:4over a bed of 100mm thick PCC1:4:8,internalwall plastered in CM1:3 and external wall with CM1:6 with sponge finish. Fixing of RCC covering slab with supply and fixing CIsquare frame &cover of size 450x450mm (Wt 110 Kgs) as per the detailed drawing. The quoted rate shall also includenecessary excavation and back filling etc.,

Providing ,fixing , testing and commissioning of R.C.C NP2 class Hume pipe laid to the required level and grade with collars joining in CM 1:3 and filling the excavated trench with approved quality saturated sand on sides, bottom and top surface of pipe with all leads and lifts, making necessary connections as required etc., complete.

200 dia hume for drainage pipes (For Road crossing)

80 dia hume for drainage pipes (For Road crossing)

Providing and fixing CPVC (Chlorinated Poly Vinyl Chloride) water supply pipes with pipe as per CTS SDR 11 (operating pressure - 7 Bar @ 82 Deg C and 28 Bar @ 23 Deg C)for pipes from 1/2 Inch to 2 Inch. Schedule 40 Pipe to be used from 2-1/2 Inch to 6 Inch. Pipes shall be joined using solvent welded CPVC fittings i.e. Tees, Elbows, Couplers, Unions, Reducers, brushings etc. including transition fittings (connection between CPVC & metal pipe/GI) i.e. Brass Adaptors (both Male & Female threaded) conforming to ASTM D-2846. ASTM F441 with only CPVC solvent cement conforming to ASTM F-493. All termination points for installation of faucets shall have brass termination fittings. Installation shall be to as per Technical Manual of manufacturer of pipes & fittings.

20 mm dia (from OHT to Toilet)

25 mm dia

32 mm dia (from OHT to RO plant)

40 mm dia

50 mm dia (drain outlet)

Supplying, laying, jointing, testing & Commissioning of uPVC Schedule 80 pressure pipes as per ASTM D 1785 with Sch 80 Fittings as per specifications, jointing with hold tite / super tite & tefflon tape and complete with fittings such as sockets, unions, reducers long or short bends, elbows, nipples flanges,checknuts,etc. Pressure testing of piping and back filling of trench complete as required. The quoted rate shall include necessary earth works, fittings like Tees, Bends, Offsets etc., G.I. brackets with pvc coated GI clamps, nuts & bolts, anchor fasteners, grip bolts, GI threaded, rods, etc., complete for external pipes. (For under ground or above ground external water supply piping.) Vertical & External

50 mm dia (Existing motor shed to sintex tank) / (Borewell to OHT-1 & OHT-2 in zone 1) / (Borewell to OHT-2 in zone 2) / (Landscape outlet form OHT) / (Borewell to OHT-2 in zone -7)

80 mm dia (Existing motor shed to OHT)

Supplying, installing and testing approved make GM ball valves conforming to IS 1703 with unions etc., complete. not leass than 10 Kg / sq.cm. with threaded / flanged joints complete with nuts, bolts, gaskets, washers etc.

20 mm dia (For Each landscape point)

32 mm dia (DWS Outlet from OHT) / (Borewell inlet to sintex tank, 2-Sintex outlet) / (DWS Outlet to RO Plant)

40 mm dia (Landscape outlet form OHT)

50 mm dia (Sinten tank overflow) / (Borewell inlet, OHT drain out, tapp off for zone-7 oht) / (2 OHT drain out) / (Borewell inlet, OHT drain out)

80 mm dia (Borewell inlet)

Protection to embedded CPVC pipes and fittings by applying protective primer (@ 100 gm/sq.m.) thereafter wrapping 4 mm thick protection coating by thermo fusion process. Overlap shall be maintained at 15 mm. The application process shall be strictly according to manufacturer’s specification.

Supplying, installing, testing and commissioning approved make water level controller for the over heat tankl & borewell The quoted rate shall include for necessary wiring in PVC conduit between the control panel, underground sump and overhead tank.(length of cable approx. 150 mts.) / (length of cable approx. 100 mts.) / (length of cable approx. 150 mts.) / (length of cable approx. 100 mts.)

Supply and providing 1000 litres capacity made up of PVC with cover suitable locking arrangements. Make: SINTEX/EQUIVALENT.

Fixing the tank with making necessary holes for inlet, outlet & overflow pipe

Supplying, fixing and testing Puddle flanges for inlet, outlet, vent and overflow pipes, fittings with D.I frame and cover to overhead water tank and under ground water tank complete with steps as shown on the drawings etc.., complete, accessories comprising of the following : The given quanity and size is only indicative , the actual size will be provised during detailed deasign

1nos. DI 600x600 Manhole frame and cover (medium duty) (weight=15 KN.) with locking facility

(32 mm dia (water level, Dws outlet) / (water level, landscape outlet)

50 mm dia (borewell inlet, Drain outlet, landscape outlet, Overflow) / (2 OHT-Drain outlet, landscape outlet) / (borewell inlet, Drain outlet, Overflow)

80 mm dia (borewell inlet)

80 mm dia (Vent swan neck with mosquito proof mesh)

150 mm dia (OHT to OHT Overflow)

Constructing brick masonry chamber Size 300 x 300 x 600 mm deep (for housing lawn hydrant) of brick work with bricks of class 75 in cement mortar 1:5 (1 cement:5 fine sand) plastering internal face with cement 1:3 (1 cement mortar: 3 fine sand) and a rough plaster on outer face with suitable cover (SFRC/DI/CI/FRP). Including excavation, dewatering, refilling, watering, ramming & removing the surplus excavated material complete as required. (All sizes are clear internal sizes).

Hydropneumatic System as described above

Supplying and fixing in position White / Colour Special Delux Model Glazed Cascade Type Parryware / Hindware / Equivalent Wall Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) with 10 litres capacity flushing tank with all internal dual flush fittings with normal seat cover. Wall Fitting

Supplying,fixing and testing 15mm CP health faucet with 2way bib cock of approved make with necessary CP flexible hose750mm longnozzle pipe , CP wall flange Angle valve complete.

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580x 440 mm white glazed earthernware of approved quality and brand with "P" or "S" trap conforming to BIS with crushed stones and cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (Onelime, Two crushed stones and Five brick jelly) 100 mm thick and finishing the top to there quired slope and including giving necessary connection toCIsoilpipes(includingthecostof100mmdiaCIpipeforalengthof600mm)bydismantlingbrickmasonrywall/reinforcedcementconcreteroof/floorslabandmakinggoodthedismantledportiontotheoriginalconditionwithleakagesetc.,completecomplyingwithstandardspecificationsandasdirectedbythedepartmentalofficers.(ThewaterclosetshouldbegotapprovedbytheExecutive Engineer before use on works).

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.)

Supplying,Installing, testing and commissioning of approved verticle/ Horizontal type elctric water heater with 2KW heating elememt with thermostat, 2nos 15mm dia CP angle valve, pressure relief valve, Non return valve with CP copper connecting pipe with wall flanges etc..25 Ltr storage capacity

Supplying & fixing CP twin coat hook fixed with SS screws onto the toilet door.

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Supplying,Installing, testing and commissioning of Shower Mixers with a hot and cold CP Single Lever Mixer unit with provision for over head round rain shower,25 mm dia. CP elbow coupling pipe, spout and overhead showercomprising of CP shower arm, pressure adjustable shower rose with CPwall flanges etc., complete.

Wall mixer

Shower Arm & over head shower rose

Supplying, fixing and testing PVC floor trap- with SS fram gratings etc.,complete.

Supplying,Installing, testing of 15 mm brass body premium variety chromium plated finish bib tap with flange not less than 500 grams weight with quarter turn spindl with either internalor external threaded coneection (IWC Toilet)

Providing and fixing CPVC (Chlorinated Poly Vinyl Chloride) water supply pipes with pipe as per CTS SDR 11 (operating pressure - 7 Bar @ 82 Deg C and 28 Bar @ 23 Deg C)for pipes from 1/2 Inch to 2 Inch. Schedule 40 Pipe to be used from 2-1/2 Inch to 6 Inch. Pipes shall be joined using solvent welded CPVC fittings i.e. Tees, Elbows, Couplers, Unions, Reducers, brushings etc. including transition fittings (connection between CPVC & metal pipe/GI) i.e. Brass Adaptors (both Male & Female threaded) conforming to ASTM D-2846. ASTM F441 with only CPVC solvent cement conforming to ASTM F-493. All termination points for installation of faucets shall have brass termination fittings. Installation shall be to as per Technical Manual of manufacturer of pipes & fittings.

20 mm dia

25 mm dia

32 mm dia

Supplying, installing and testing approved make GM ball valves conforming to IS 1703 with unions etc., complete. not leass than 10 Kg / sq.cm. with threaded / flanged joints complete with nuts, bolts, gaskets, washers etc.

20 mm dia

25 mm dia

Supplying,Installing, testing of 15 mm brass body premium variety chromium plated finish bib tap with flange not less than 500 grams weight with quarter turn spindl with either internalor external threaded coneection (For Food stall- 2 Tap)

Providing ,fixing , testing and commissioning of PVC pipes (6Kg/sqcm) with solvent cement, further protected witrh FRP paste, ..complete

75 mm dia

110 mm dia

Supplying, fixing and testing PVC pressure pipes (6Kg/sqcm) confirmingto IS4985 for waste connection from wash basin,kitchen sinks to floortrap /anti syphonage pipe with solvent cement joints, including allthe fittings, laid concealed/concealed in wall etc, the work shall includewall chase and making good the same in cement mortar and restore the same original condition neatly as directed by the Engineer in-charetc.,complete.

40 mm dia. 6 kg /cm2

50 mm dia. 6 kg /cm2

Supply, Laying and testing of 1.1KV Grade XLPE insulated, PVC sheathed Aluminium / Copper conductor steel armoured power cables as per the specs. The rates quoted shall be for laying in trays, cable trenches (indoor and outdoor), pipes, etc. For buried cables,the excavation work will be included under the heading "Civil works for outdoor cable laying." AS PER IS 7098 / IS 1554

3 Core x 6 Sqmm Al Ar CABLE

3 Core x 1.5 Sqmm CU PVC CABLE

3.5 Core x 50 Sqmm Al Ar CABLE

4 Core x 4 Sqmm CU Ar Cable

4 Core x 6 Sqmm Cu Ar Cable

4 Core x 10 Sqmm Al Ar CABLE

4 Core x 25 Sqmm Al Ar CABLE

Supplying and providing the end terminations with Aluminium / Copper cable lugs, Double compression brass cable glands, taping, crimping, gland and armour earthing, etc. complete as required.

3 Core x 6 Sqmm Al Ar CABLE

3.5 Core x 50 Sqmm Al Ar CABLE

4 Core x 4 Sqmm Cu Ar CABLE

4 Core x 6 Sqmm Cu Ar Cable

4 Core x 10 Sqmm Al Ar CABLE

4 Core x 25 Sqmm Al Ar CABLE

Supplying, installation, testing & Commissioning of the following types of light & fan, drivers controlgear, connecting wire with Lamps etc. complete as required.

5 Watts LED short bollard stone light fixture

8 Watts LED focus light fixture (Out door type)

9 Watts LED height bollard stone light fixture

15 Watts LED light fixture

18 Watts LED light fixture (Out door type)

18 Watts LED wall washer fixture (Out door type)

18 Watts LED light fixture (Celing mounted)

28 Watts LED light fixture (Tube lights)

Ceiling fan

Exhaust Fan

circuit for Submain wiring with following sizes of PVC FRLS insulated copper conductor single core wire in surface/recessed PVC conduit as required, including supply of pvc conduit:

2 x 1.5 + 1 x 1.0 sq mm

2 x 2.5 + 1 x 1.5 sq mm

2 x 4.0 + 1 x 2.5 sq mm

20mm PVC Conduit

25mm PVC Conduit

32mm PVC Conduit

Wiring with 2x2.5Sqmm FRLS PVC insulated 1100 V grade FRLS copper conductor wires and 1x1.5Sqmm FRLS PVC insulated earth wire in FRLS PVC conduits of not less than 20 mm size as per specification titled "DISTRIBUTION SYSTEM, CONDUITS, WIRING ANDACCESSORIES". Height of ceiling varies from 3.5 to 4 metres. A separate neutral shall be run for each circuit. Any civil works involved like wall chipping ,plaster and finishing shall be considered and executed to satifaction of enginer in charge . Note: The rates for the following items shall include supply and installation of Modular type of switches, sockets, fan regulators, etc., along with all necessary fixing accessories like mounting screws, concealed/surface mounted switch boxes suitable for modular type switches, internal wiring, top plate, etc., all complete as required. The modular type switches, sockets, regulators shall be of approved make & shade.

Single light point controlled by 6 Amps SP switch

Two light point controlled by 6 Amps SP switch

Ceiling Fan Controlled by 10A Switch with Elec. Regulator

Exhaust fan Point controlled by 10A SP Switch

Supply and fixing of 6/10A independent three pin switched sockets outlet box including providing 10A switched sockets & interconnection as required.

Supply and fixing of 6/10A dependent three pin switched sockets outlet box including providing 10A switched sockets & interconnection as required.

Supply, fixing, erection, testing & commissioning of power points by providing following switches/sockets mounted on suitable size GI boxes fixed flush/surface on to the wall with all fixing and wiring accessories.

16 Amps, 5-pin ,230 Volts, single phase round pin socket with 16 Amps single pole switch with indicating LAMP.

6 Amps, 5 pin ,230V, single phase round pin socket with 6 Amps SP switch along with indicating lamp.

Supply and laying of pipes in wall / floor / in ground including chipping / excavation laying and making good the surface as required. Any collars and bends and nipples required shall be laid at a depth of 900 mm below ground level or under paved areas / under floor as required.

50 mm dia Class "B" G I pipe.

100 mm dia Class "B" G I pipe.

Supplying, erection, testing and commissioning of 415Volts, 3 phase 50Hz switchboards/panels/PDBs with ACB,MCCB,MCB units as per specification titled "415 Volts switch Boards", As per SLD and Specifications complete as required.

MAIN PANEL

Supply, store, erection, testing and commissioning of Double Door out door type, LT Feeder Pillar 1 having 1 No 32A 4P MCB as Incomer with 24 Hour Time Switch , 3nos 16A DP RCCB as sub incomer with Contactor for automatic operation and 12 nos 10A SP MCBs as Outgoing. (As per SLD and Specifications complete as required.)

Supply, store, erection, testing and commissioning of Double Door out door type, LT Feeder Pillar 2 having 1 No 32A 4P MCB as Incomer with 24 Hour Time Switch, 3nos 16A DP RCCB as sub incomer with Contactor for automatic operation and 18 nos 10A SP MCBs as Outgoing. (As per SLD and Specifications complete as required.)

Supply, store, erection, testing and commissioning of Double Door out door type, LT Feeder Pillar 3 having 1 No 63A 4P MCB as Incomer with 24 Hour Time Switch , 3nos 16A DP RCCB as sub incomer with Contactor for automatic operation and 12 nos 10A SP MCBs and 3 nos 32A TPN MCB with KWH meter as Outgoing. (As per SLD and Specifications complete as required.)

GST at 18%

SRI SELLIAMMAN AND CO (BID ID -1201228)