PROVN OF OVER HEAD SHED AND ADDN ALTN TO BLDG NO P-74 AT INS UTKROSH UNDER GE MINNIEBAY PORTBLAIR

Amount

Dismantling of plain or corrugated steel sheeting, any gauge, thickness in roof covering, etc. including ridge complete all as specified and directed by Engineer-in-Charge.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as manufacturers instruction complete all as specified and directed by Engineer-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing complete all as specified and directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-Charge.

S&F Mild Steel Rolled sections as in Roof trusses (framed) grade E-250 Fe 410-W quality A, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge.

S & F Aluminium flat , wind ties of any size fixed with self tapping screws of size 40/50mm with integral EPDM washer screwed in roof covering, including all necessary drilling, bolting or riveting etc., and similar work complete all as specified and directed by Engineer-in-Charge.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets including grid system complete all as specified and directed by Engineer-in-Charge.

S&F for aluminium anodised snap grid false ceiling of standard aluminium section such as wall angle of size 38mm x 25mm x 2.4mm weighing 0.36 Kg/Rm main/cross tees of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/Rm, grid size n.exc. 610 x 610mm suspended with 4mm dia GI wire at interval n.exc. 600mm centre to centre for main & cross tees fixed to roof slab roof truss fixed with suitable size MS hook and fastening bolts etc including 'E' board classic 4mm thick oceanic sheet of size n.exc. 610 x 610mm size fixed in ceiling with clips to aluminium snap grid complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M&L for vitrified double charged coloured ceramic tiles (Dark shade) 10 mm thick ( Square/ rectangular) area of each tiles not exc 0.36 Sqm in floors set and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and directed by Engineer-in-Charge.

All as per item No 11.00 above but as in vertical surfaces/skirting over and including 10mm thick backing coat in CM (1:3) complete all as specified and directed by Engineer-in-Charge.

M&L for non skid cermic coloured tiles 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floor etc and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile over and including 15mm thk screed bed or bedding layer in CM(1:6) complete all as specified and directed by Engineer-in-Charge.

S&F glazed digital ceramic coloured tiles in vertical surfaces 300x450x7 to 8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM (1:3) complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames with shutter (without taking off shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed by Engineer-in-Charge.

S&F Anodised Aluminium frames or shutters for doors, partitions, Windows and Ventilators and similar works with one or more rebates incl necessary fittings and fixture such as jointing cleats, glazing clips, rubber packings, screws, handles stainless steel adjustable friction stay hinges etc. as required fixed to aluminium frame complete all as specified. NOTE: (i) Unit rate quoted shall deemed to include cost of rubber beading, fittings such as handles, SS friction stay hinges and fixing of glass, wire cloth & Decogrill etc. (ii) Glass, wire cloth & grill to be measured and paid separately as supply only

Supply only anodised aluminium 'XPM' 1.50mm x 3.00mm size for mosquito proofing 22 gauge thick complete all as specified and directed by Engineer-in-Charge.

Supply only aluminium anodised grill DG (102) (10mm in width) of DECO grill wt not less than 3.26Kg/Sqm, any make complete all as specified and directed by Engineer-in-Charge.

Supply only 4 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n,exc 0.5 Sqm, each pane complete all as specified and directed by Engineer-in-Charge.

Supply only 5 mm thick sheet glass, ordinary quality and glazing with oil putty in squares exc 0.5 Sqm, each pane complete all as specified and directed by Engineer-in-Charge.

S&F Stainless steel butt hinges 100mm size medium weight complete all as specified and directed by Engineer-in-Charge.

S & F Floor Door Stopper of size 100 mm of aluminium alloy body and tongue, anodised complete all as specified and directed by Engineer-in-Charge.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opeing, complete all as specified and directed by Engineer-in-Charge.

S&F for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing including necessary butt hinges, tower bolt etc complete all as specified and directed by Engineer-in-Charge.

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key complete all as specified and directed by Engineer-in-Charge.

Demolition of Precast Concrete work/ precast concrete block built in cement mortar including all quoins arches pillars etc complete all as specified and directed by Engineer-in-Charge.

M & L for Pre-cast cement concrete block masonry using PCC, Type C-1 1:3:6 (20mm graded aggregate) solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6, straight or curved on plan exceeding 6 m mean radius complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15mm thick plaster in CM (1:4) on brick/block masonry or concrete surfaces finished even & fair complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15mm thick plaster in CM (1:6) on brick/block masonry or concrete surfaces finished even & smooth complete all as specified and directed by Engineer-in-Charge.

M&L for applying two coats of cement based paint over a coat of chalk whiting on newly plastered surface of wall including preparation complete all as specified and directed by Engineer-in-Charge.

M&L for applying two coat of acrylic emulsion weather coat premium quality antifungal exterior emulsion over a coat of primer on newly plastered surface of wall including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

M&L for applying One coat of acrylic emulsion weather coat premium quality antifungal exterior emulsion on old plastered surface of wall including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

M & L for complete removal of existing treatment on wall surfaces and applying two coats of oil bound distemper over a coat of chalk whiting,over a coat of alkali resistant primer on plastered surfaces,complete all as specified and directed by Engineer-in-Charge.

S & F 150mm long Aluminium anodised Handle, of extruded section Fabricated Type complete all as specified and directed by Engineer-in-Charge.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections complete all as specified and directed by Engineer-in-Charge.

S & F 200 mm long Aluminium anodised barrel tower bolts of extruded sections complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete in ground floor and pavings nexc 15cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge.

M&L for Plain Cement Concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) in flooring/ hard standing/Path/plinth protection / Bed and similar works finished even and fair complete all as specified and directed by Engineer-in-Charge.

S&F Vitreous China urinals, half stall type ,white (back to corner wall type), complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement;including 32mm bore PVC waste pipe of length upto 1200mm and PTMT urinal spreader complete all as specified and as directed.

Supply and fix in repairs GI tubing, medium grade, 15 mm bore with all fittings and connections and fixing to walls,ceiling or laid in floor including cutting chases in brick walls pinning in and making good disturbed surfaces using with cement mortar 1:3 all as specified and directed.

All as per above item No 42.00 above but 20mm bore complete all as specified and directed by Engineer-in-Charge.

Refixing old steel tubing and connections in new or old postion (wall, ceiling , floors ,etc) 15mm bore complete all as specified and directed by Engineer-in-Charge.

All as per item No 44.00 above but 20mm bore complete all as specified and directed by Engineer-in-Charge.

Material &Labour for cutting existing GI/DI pipe line of 50/80 mm bore and making connection for 25 mm bore GI pipe line complete all as specified and directed by Engineer-in-Charge.

S&F sluice valve ISI marked suitable for 50 mm bore pipe with stainless steel spindle and iron wheel head long body class PN 1.6 complete with rubber gaskets, flange, nut and bolts of suitable size conforming to IS-14846 complete all as specified and directed by Engineer-in-Charge.

Supply, laying GI water tubing, medium grade ISI marked 25 mm bore conforming to IS-1239 (Part-1) including all fittings such as bends, tees, short pieces, connectors, elbows, reducers etc laid in trenches / floors or fixed to walls / ceiling / roof etc complete all as specified and directed by Engineer-in-Charge.

Supply, laying GI water tubing, medium grade ISI marked 50 mm bore conforming to IS-1239 (Part-1) including all fittings such as bends, tees, short pieces, connectors, elbows, reducers etc., laid in trenches / floors or fixed to walls / ceiling / roof etc complete all as specified and directed by Engineer-in-Charge.

S & F in repairs vitreous china wash down, white, water closet pan (pedestal pattern) with 'P' of 'S' trap,plastic seat cover to match with colour of WC, closed pattern with flat bottom & cover and chromium plated mild steel or aluminium anodized hinging device including connecting to trap and flushing pipe, anti-syphonage pipe etc complete all as specified and directed by Engineer-in-Charge.

S & F in repairs Vitreous china wash hand basin, white, flat back of size 600 mm X 480 mm excluding pillar tap, and waste fittings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, including vitreous china pedestal complete all as specified and as directed.

Material & Labour 75mm dia cast iron floor trap with grating including jointing to waste pipe with run lead joint and embedded in cement concrete (1:2:4) type B-1 using graded stone aggregate complete all as specified and directed by Engineer-in-Charge.

S & F in repairs Bib Taps, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair soap dish, brass, chromium plated fixed to wall with brass chromium plated screw, complete all as specified and directed by Engineer-in-Charge.

S & F 15 mm dia bore cast copper alloy chromium plated stop (angle) cock, complete all as specified and as directed.

S&F 15mm bore concealed type with long shank and cup cast copper alloy chromium plated fancy type screwed down, high pressure, with crutch or butter fly handles fixed in repairscomplete all as specified and directed by Engineer-in-Charge.

S&F PVC connections 15mm size with PTMT nuts of legth 600mm complete all as specified and directed by Engineer-in-Charge.

S&F in repairs toilet paper holder of vitreous china fixed to walls with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia D-type, 60cm long between flange complete all as specified and directed by Engineer-in-Charge.

S&F in repairs brass chromium plated tubular towel rack complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including bracket & flush pipe and fixing to WC complete all as specified and directed

S & F in repairs Pillar Taps, cast copper alloy, Chromium Plated, 15 mm dia, with capstan head, screwed down high pressure with or with out lettered "Hot" or "Cold" with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repair Waste pipe any dia (32/40mm) complete all as specified and directed by Engineer-in-Charge.

S&F in repairs for stainless steel of grade SS-316, mirror polished square/rectangular/circular pipe of different sizes for structural shed, balusters, railing and similar works including stainless steel arc welding and bright finishing by polishing with grinding etc, complete al as specified and directed

M&L for Chequered Cement Concrete Tiles 300 mm X 300mm X 25 mm thick, set, jointed and pointed in neat cement slurry in floors / vertical surfaces / risers / bullnosed treads with grey cement including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

S&F in repair 25mm dia aluminum powder coated best quality curtain rails with fixing brackets in both ends complete all as specified and directed by Engineer-in-Charge.

S&F in repair decorative globes for curtain rails to be fixed at both end complete all as specified and directed by Engineer-in-Charge.

S&F in repair brass chromium plated over head shower rose with arm 125 mm size with long body with swivel joint including fixing to steel pipe or union,complete all as specified and directed by Engineer-in-Charge.

Taking out old unserviceable PVC pipe of size 150mm, 110mm, 75mm from trenches and walls with all fittings incl necessary excavation, RFR and removal upto 250mtrs complete all as specified and directed by Engineer-in-Charge.

M&L, 150mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches floor or wall and similar works complete all as specified and directed by Engineer-in-Charge.

S&F Plain, solid, straight chowkats and frames of 2nd class hard wood, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge.

S&F 30mm thick Glazed and skeleton shutters of 2nd class hard wood open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters complete all as specified and directed by Engineer-in-Charge.

M & L for preparation newly untreated wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer over 10cm width or girth complete all as specified and as directed

M&L for preparation of old painted wooden surface and applying one coat of synthetic enamel paint of any description exc 10 cm width or girth, complete all as specified and as directed.

S&F in repair 1mm thick stainless steel Sink with drainage board for kitchen with plug washers, waste pipe and coupling includind bedding in cement mortar, two coat iron fixing bracket of required size and connecting union to pipe over all size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm, complete all as specified and directed by Engineer-in-Charge.

Dismantling of stone slab of any description including cement mortar bedding but not backing, complete all as specified and directed by Engineer-in-Charge.

M&L for 20mm thick Granite machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type complete all as specified and directed by Engineer-in-Charge.

M & L for Granite 20mm thick machine cut, bedded and jointed on floor/slab with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types complete all as specified and directed by Engineer-in-Charge.

Dismantling boarding (any type) with wooden frame work as in kitchen cabinet, shutter, drawar and similar work including builder hardware complete all as specified and directed by Engineer-in-Charge.

M&L for 18 mm thick HDF high quality boardings one side pre laminated (white) and other side plain to receive decorative laminates as in kitchen cabinet/shelves/wardrobe/wall panelling fixing with necessary small fitting as required as per manufacturers instructions complete all as specified and directed by Engineer-in-Charge. Make : Greenply/Action Tesa

Material &Labour for 1mm thick Decorative laminates surface finish, coloured and pattern as approved, fixed with approved adhesive as per manufactures instructions complete all as specified and directed by Engineer-in-Charge.Make : Greenlamp

S&F heavy duty stainless steel Telescopic channels for sliding arrangement of size 20" for drawars, cabinets and similar works with carying capacity not less than 10 kg complete all as specified and directed by Engineer-in-Charge.

S&F heavy duty stainless steel Telescopic channels for sliding arrangement of size 20" for drawars, cabinets and similar works with carying capacity not less than 30 kg complete all as specified and directed by Engineer-in-Charge.

S&F Stainless steel auto closing heavy duty modular hinges for cupboard shutters complete all as specified and directed by Engineer-in-Charge. (Make : Godrej or equivalent)

S&F 75mm long Modular Stainless steel decorative handles complete all as specified and directed by Engineer-in-Charge.

S&F Stainless steel pull out Cuttlery Basket of size 21"x 20"x 4" of minimum 304 grade complete all as specified and directed by Engineer-in-Charge.

S&F Stainless steel Plain pull out Basket of size 21"x 20"x 6" of minimum 304 grade complete all as specified and directed by Engineer-in-Charge.

S&F Stainless steel Plate Basket of size 21"x 20"x 8" of minimum 304 grade complete all as specified and directed by Engineer-in-Charge.

S&F Stainless steel Side bottle Basket of size 6"x 20" x 20" of minimum 304 grade complete all as specified and directed by Engineer-in-Charge.

M & L for 300 x 300 x 10mm thick coloured heavy duty vitrified exterier chequered tiles as in floor/wall set and jointed in cement slurry and pointed in coloured cement to match laid over 15mm thick cement mortar in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation etc, and getting out in hard/dense Soil add additional depth beyond the first 1.5 m complete all as specified and directed by Engineer-in-Charge.

M&L Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete complete all as specified and directed by Engineer-in-Charge.

M&L for Reinforced cement concrete 1:1.5:3 ( Nominal mix) 20mm stone aggregate in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed by Engineer-in-Charge.

M&L for form work to sides of rough finished concrete foundations, foootings, bases of columns, raft and raft beams, sides and soffits if any of foundation and plinth beams and similar work vertical or to batter compelte all as specified and as directed by Engineer in Charge.

M&L for Reinforced cement concrete 1:1.5:3 Nominal mix using 12.5mm stone aggregate in columns,pillars, piers, posts and struts etc complete all as specified and directed by Engineer-in-Charge.

M&L for form work to sides of Pillars, posts, struts, piers,columns and sanctions complete all as specified and directed by Engineer-in-Charge.

M&L for TMT bars 10mm dia and over as in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed by Engineer-in-Charge.

All as per item No 98.00 above but 6 mm to 8mm dia in stirrups complete all as specified and directed by Engineer-in-Charge.

Returning filling including spreading, levelling, watering and well ramming in layers n.exc 25cm complete all as specified and directed by Engineer-in-Charge.

Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed by Engineer-in-Charge.

M&L Precast cement concrete block masonry with PCC solid blocks in 1:3:6 type C1 using 20mm graded stone aggregates, exc. 10cm in width and set in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

M&L for Plain Cement Concrete 1:2:4 type B1 Nominal mix (20mm graded aggregate) as in copings etc complete all as specified and directed by Engineer-in-Charge.

M&L for external rendering 5mm thick in CM 1:4 with water proofing compound (water proofing compound shall be used as per manufacturers instructions) over a coat of 10mm thick in CM 1:6 over brick or concrete surfaces finished even and fair complete all as specified and directed by Engineer-in-Charge.

Supply only water proofing compound Make - Scott No 1 conforming to IS-2645 1975 complete all as specified and directed by Engineer-in-Charge.

M&L for Granite (of any type -Z Black) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer-in-Charge.

M& L for two coat of weather proof exterior acrylic emulsion paint with anti fungal property over a coat of primer and a coat of external wall putty on newly plastered wall surfaces including preparation of surfaces etc complete all as specified and as directed by Engineer-in-Charge.

S & F Mild steel work in tubular /post/trusses/purlin including special shaped washers base and bed plate cleat nut and bolt etc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 complete all as specified and directed by Engineer-in-Charge.

M&L For Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary gusset plates, riveting, etc. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel' complete all as specified and directed by Engineer-in-Charge.

S& F for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10 mm long not exc to 15 cm long including diameter of neck 11 to 15 mm complete all as specified and as directed by Engr in Charge.

S&F Oral lay in plain Aluminium ceiling system consisting of 600x600mm ties of 0.6/0.7mm thickness in white colour laid over pre - coated aluminium sections white colour 15 mm wide tee section flanges having sticthing on the main runner , 1200 mm and 600 mm cross Tee with web height of 43 mm and a load carrying capacity of 23.71 Kg/ Sqm having galvanistation of 120ngm / Sqm with ties having resistance (RH) OF 100% fire perfomance A2-s1 , Do in moudle of size 600x600 with acoustic lining , suitable for green building applications with re - cycled content of 50%, including necessary ceiling board/sheet complete all as specified and directed by Engr-In-Charge

M&L for coloured heavy duty Vitrified coloured tiles 300X300X10 mm thick of each tiles in floor/ steps/stairs etc set and jointed with cera bond paste and pointed in coloured cement to match as in floor complete all as specified and directed by Engr-In-Charge.

M&L for coloured Glazed ceramic tiles in vertical surfaces 350X250X7mm / 450X350X 7mm thick as in skirting /dado, set and jointed in cement slurry and pointed in coloured cement to match laid over 10mm thick cement backing coat in CM 1:3 complete all as specified and directed by Engr-In-Charge

S&F wall mount steel laser cut display sign board of 5 mm to 8 mm thick cut letter of appropriate size ,approximate size of board is 3 Sqm complete all as specified and directed by Engr-In-Charge.

Supply and fix Mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes all as specified directed by Engr in Charge

S & F 30 mm thick, second class hard wood, plain framed panelled shutters [any numbers of panels] with panels of timber flat on both side [feather edged] or of veneered particle board, medium density, wood particle board with commercial face veneers or ply wood complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as manufacturers instruction and as directed. Make : TATA Bluescope Durashine

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing all as specified and as directed. Make : TATA Bluescope Durashine

M & L point wiring with 1.5 Sq.mm (nominal area) PVC unsheathed multi strandard copper conductor pvc insulated 1100 volt FRLS grade multistranded cable drawn through and including PVC casing capping/conduit ISI marked minimum 20mm size and its accessories complete along with 1.5 Sqmm cable but in green color as continuous earthing wire and connecting to common earth dolly completely concealed ,surface, in walls/ceiling/roofs with and including 1.2 mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for mounting switches, switch socket combinations fan regulators etc., as required with 3 mm thick plastic laminated sheet top cover all as directed and specified for the following:-

(a) One light /fan point controlled by one way 05 Amps switch

(b) One 5 Amps Socket point on independent board controlled by one way switch

(c) One three pin switch socket 5 Amps point on same board.

All as per item No 119.00 herein before but with 2.5 Sqmm single core multi stranded FRLS copper conductor for one three pin socket 5 Amps on independent board including continuous earth wire PVC insulated 2.5 Sqmm copper solid conductor to common earth dolly complete all as specified and directed by Engr-In-Charge

All as per item No 119.00 herein before but with 4 Sqmm single core multi standard copper conductor for one three pin socket 5 Amps on independent board including continuous earth wire PVC insulated 4.0 Sqmm copper solid conductor to common earth dolly complete all as specified and directed by Engr-In-Charge

S&F socket outlet 3/5 pin 5 Amps 240 volts flush type complete all as specified and directed by Engr-In-Charge

S&F socket outlet 3/5 pin 5/15 Amps 240 volts flush type complete all as specified and directed by Engr-In-Charge

S&F switches 5/6 Amps 240 volts flush type complete all as specified and directed by Engr-In-Charge

S&F switches 15/16 Amps 240 volts flush type complete all as specified and directed by Engr-In-Charge

S&F ceiling rose surface type bakelite 65 x 50 mm with three terminals with ISI marked complete all as specified and directed by Engr-In-Charge

Supply and fix Modular switch 1 way 6A, 220V 50Hz 1module complete all as directed at site.

Supply and fix Modular switch 1 way 16A, 220V 50Hz 1module complete all as directed at site.

Supply and fix Modular bell push 6A, 220V 50Hz 1module complete all as directed at site.

Supply and fix modular socket, 6A - 3/5 pin combined ,220V 50Hz 2module complete all as directed.

Supply and fix modular socket, 16A - 3/5 pin combined ,220V 50Hz 2module complete all as directed.

Supply and fix modular fan step regulator, 120W - 1/2 module ,220V 50Hz complete all as directed at site.

Supply and fix White cover plate with frame,1 module complete all as directed at site.

Supply and fix White cover plate with frame,3 module all as directed at site.

Supply and fix White cover plate with frame,4 module complete all as directed at site.

Supply and fix vertical DB TPN 4way IP 43 IK-09 with metal double door suitable for Provision of MCB , 36 KA 63 Amp for housing of MCBs complete all as directed by Engineer-in- Charge. Make : Legrand cat part No-507725

Material and labour for supply and fix LED panel light recessed mounted with dimension 2400mmx,150mm ,52000 lm 40 Watt, aluminium extruded recessed luminaries with 135mm diffused compartment available both in standalone & continuous options suitable for Armstrong techzone ceiling with CCT (Color changing technology), 4000K, IP-20 ,IK-2 including connection with 3 core flexible copper conductor from ceiling rose to light fitting complete all as specified and directed by Engr-In-Charge Make:- Philips. Cat part No-RC820B LED52S 4000 PSU W15L240 OD SI

S&F energy efficient Post top led lights IP-65, acrylate cover and semi-matt high-reflective optic , 2300lm (8.19lm/watt) , 27Watt with surge protection 4KV, overall height 265mm and 578mm dia meter fitting on post top and making good to the disturbed surface including all necessary wiring , clamps, nut and bolts mounting accessories etc complete all as specified and directed by Engr-In-Charge Make : Philips Cat part No-BGP161 LED2300/WW PSU 220-240V 7043 IN

Supply and fix LED tube light fitting, 1x20 w, 230v .Surface and wall mounted LED batten, extruded aluminum housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver. Flicker free, high efficiency and robust industrial batten family suitable for Surface, Wall and Conduit mounting. The product family offers dimmable and connected batten option & connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engr-In-Charge Make : Philips Cat Pat No.BN308C LED20S-6500 L60 PSU WH

Supply and fix load line vertical DB VTPN 8way IP 54 IK-09 with metal double door suitable for Provision of MCCB , 25 KA 160 Amp for housing of MCBs complete all as directed by Engineer-in- Charge. Make : Legrand cat part No-5077 52 Note : Sheet metal enclosure for MCB distribution board shall be fixed in the wall such that front cover shall be seen flush with the wall surface

S&F Distribution Board SPN 8 way with category of protection double door type IP-43, IK 09 factory made with tinned copper 200 Amps rated bus bar suitable for MCBs,complete all as specified and directed by Engr-in-Charge. Make : Legrand cat part No. 5076 21 Note : Sheet metal enclosure for MCB distribution board shall be fixed in the wall such that front cover shall be seen flush with the wall surface

S&F MCCB three pole 160 Amps, 440 Volts, 25 kA 440 Volt 50 Hz complete all as specified and directed by Engr-in-Charge.

S&F MCB Double Pole 32 Amps working on 415 volts 50 Hz AC supply,10 KA C series including taking out old one complete all as specified and directed by Engr-In-Charge

supply and fix MCB single pole 6 to 40 Amps working on 240 volts 50 Hz AC supply,10 KA C series complete all as specified and directed by Engr-In-Charge

Supply and fix in replacement of Street light fitting LED type, 30 Watts 240 Volts luminous shall be more than 2000 lumen, efficiency not less than 100 lm/Watt , and accessories, completely mounted on 25 mm dia light grade GI pipe bracket 1.0 mtr long bent to shape, mounted on wall, connection complete all as specified and directed by Engr-In-Charge

M&L for Sub main wiring complete with 2x1.5 sqmm , single core , multi stranded copper conductor FR PVC insulated and sheathed cable 1100 Volts grade , drawn in PVC Casing Capping in surface /PVC conduit in concealed/surface (as required) along walls roofs etc including 1.5 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by Engineer-in-Charge. Note:- (i) All three wire/cable(phase, neutral and earth) should be run through for each individual circuit from the DBs. (ii) Two run of cable,one run of earth conductor and one run of conduit shall be measured as one length)

All as per serial item No- 149.00 above but 2X2.5Sqmm and 1X 1.5Sq,mm for Earth wire complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No-149.00 above but 2 X 4Sqmm and 1 X 2.5 Sq,mm for Earth wire complete all as specified and directed by Engineer-in-Charge.

Excavation in soft loose soil not exceeding 1.5 mtr wide and n exc 1.5 mtr depth and getting out including forming of bottom for laying cable all as specified and directed by Engineer-in-Charge.

Returning filling soft & loose/hard & dense soil including spreading leveling, watering and well ramming in layers n exc 25 cms all as specified and directed by Engineer-in-Charge.

Removal of excavated material n.exc 50 mtrs and depositing where directed at a level n.exc 1.5 mtrs above the starting point all as specified and directed by Engineer-in-Charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core all as specified and directed by Engineer-in-Charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3.5 core all as specified and directed by Engineer-in-Charge.

Supply, laying of Telerex DWC (double Wall corrugated) HDPE pipe ISI marked of outer dia of 63 mm and inner dia 50 mm polyethylene including couplers, bends, cap etc., with smooth internal and profiled external surface for non pressure under ground cable all as specified and directed by Engineer-in-Charge.

S&F energy efficient bollard light 360 degree light distribution with IP-65 fitting on ground, wall etc including excavation and PCC 300cmx300cm as required and high quality integrated LEDs ,180mm dia meter 4000K, 10W 220Volt with black case aluminuim including all necessary wiring , clamps, nut and bolts mounting accessories etc all as specified and directed. Make : Philips Cat part No- BCP151 LED150/NW PSU 220-240V 7043

M&L for fix earthing complete with Galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanized earth strip 32x6 mm size connected by means of bolts, nuts, check nuts and washer of galvanized iron or steel, provision of 15 mm dia GI pipe medium grade for protection of G1 earth wire and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type CI chamber. MS funnel, wire gauge. 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos. 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I. Note: (i) Cost of GI earth strip and GI protection pipe upto 7.5mtr length shall be deemed to be included in the rate quoted for this item. (ii) The unit rate shall also includes for Wire mesh, funnel, excavation, returning & filling, PCC chamber pit, RCC cover & test point. (iii) PCC pit shall be provided at least 500mm away from the earth pit and not just on the earth pit.(iv) All accessories required for galvanised steel plate electrode required, complete all as specified and directed by Engr-In-Charge

Supply & Fix ceiling fan HS décor 5 star rating , 1200 mm Sweep 240 volt , Opal . White/brown including rod minimum length 1.5 m and bush , nut bolts , capacitors including driling on roof and fixed 1 to 1.5 feet rod and connecting bolts etc complete all as specified and directed by Engr-In-Charge Make; Havells model :- ES NEO white/brown

Supply & Fix Exhaust fan , 300 mm Sweep 240 volt , 1400RPM,Opal . White/brown including making hole suitable size for fixing 300 mm sweep exhaust fan making good distribution and after fixing exhaust fan flap cover to be fixing on behind exhaust fan hole , nut bolts , capacitors including all accessories complete all as specified and directed by Engr-In-Charge.

S&F single phase, 230 volts, 50 Hz, wall mounted fan, 450 mm sweep fixing on wall with fan clamp/hook, connecting electrically complete all as specified and directed by Engr-In-Charge.

Supply and fix Buzzer, Ding Dong AC. 230 volts single pole complete all as specified and directed by Engr-In-Charge.

S&F sheet metal enclosure with socket plug top , single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP of capacity 20 to 32 Amps complete all as specified and directed by Engr-In-Charge.

S & F LED light fitting, 1x33 w, 230v .2x2 recessed mounted general purpose square shaped luminaire with high transitivity diffuser suitable for office application with profiled & flat diffuser fitted on ceiling connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engr-In-Charge.

S&F of 25 Liters capacity geysers ISI marked vertical type white / off white, copper container inner tank with fiber reinforced body (FRB) puff insulation for both inner tank & for hot outlet copper connection pipe with all in built in safety accessories like thermostat / automatic thermal cut off with ON/ OFF/ CUT out indicators all pre - wired and additional safety accessories like pressure release valve / pressure reducing valve , non-return valve , including new PVC heavy duty pipe with brass ferrule fittings for HOT and COLD water connections fixed in same or new location as ordered as per manufacturers instruction with suitable size nuts & bolts & making necessary connection and testing on completion complete all as specified and directed by Engr-In-Charge.

S&F in repair Rotational moulded polyethylene (HDPE) 1000 liter water tanks, cylindrical & vertical type triple layered ISI marked with 40 mm / 25 mm bore tank nipple, ISI marked hoisted and fixed on position including provision of 40 mm / 25 mm dia spouts for connecting inlet, outlet, over flow and washout pipes complete all as specified and directed by Engr-In-Charge.

S&F 25 mm bore gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-In-Charge.

S&F 25 mm bore ball valves, high pressure with polythene float and flynut compelete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engr-In-Charge.