Construction of UG Sump in Helicopter Division, HAL HC Including Civil and Electrical Work.

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

PAN No.:

Service Tax Registration No

Goods and Service Tax ID No.

Contact details

Please Enter Contact person Name

Pls Enter Mobile No

Registered Contractor

Average annual financial turn over during the last 3 years, ending 31st March 2024 of the previous financial year [ should not be less than 30% of Amount put to tender]

TURN OVER IN Rs.

Pls Enter Turn over in Rupees for all the 3 years

ESI & PF Nos with proof

Remarks if any

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission

Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please enter Details for Work No 1

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No II

work done

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No III

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Pls Enter Details for Person holding Power of Attorney

DECLARATION I

DECLARATION II

Pls Accept the Delaration II

Specification

Earth work in excavation in all kinds of soil by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.50m in width as well as 10Sq m on plan) including getting out and disposal of excavated earth lead upto 50m and for all lift, hire charges of machinery and equipments, cost of all materials, labour charges and all other incidental charges, etc., all complete as per directions of the Engineer-in-Charge.

Construction of granular sub-base by providing close graded material conforming to conforming to Grade-I (size range 75mm to 0.075mm) having CBR Value-30, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, etc., all complete as per specifications and directions of Engineer-in-Charge.

Providing and Laying in position Cement Concrete of 1:4:8 (1 cement : 4 coarse sand (zone3) derived from natural sources : 8 graded stone aggregate of 40 mm nominal size derived from natural sources) excluding the cost of centering and shuttering for all work upto plinth level including all lead and lift, hire charges of machinery and equipments, curing, cost of all materials, labour charges and all other incidental charges, etc., all complete as per the directions of Engineer-in-Charge of the work.

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete of M25 grade with minimum cement content of 330 Kgs/Cu m all works upto plinth level; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; excluding the cost of centering, shuttering, finishing and reinforcement but including pumping of concrete to site of laying, curing, carriage for all leads; hire charges of machinery and equipments, cost of all materials, labour charges and all other incidental charges, etc., all complete as per the directions of Engineer-in-Charge of the work.

Centering and shuttering including strutting, propping, etc., and removal of form work for foundations, footings, bases for columns, etc., The rate quoted shall include all lead, lift, hire charges of machinery and equipments, cost of all materials, labour charges and all other incidental charges, etc., all complete as per the directions of the Engineer-in-Charge of the work. Note : Form work material contractors own property and shall be removed after completion of work.

Centering and shuttering including strutting, propping etc. and removal of form work for walls (any thickness) including attached pilasters, butteresses, plinth and string courses, etc., The rate quoted shall include all lead, lift, hire charges of machinery and equipments, cost of all materials, labour charges and all other incidental charges, etc., all complete as per the directions of the Engineer-in-Charge of the work. Note : Form work material contractors own property and shall be removed after completion of work.

Centering and shuttering including strutting, propping, etc., and removal of form work for Suspended floors, roofs, landings, balconies and access platform, etc., The rate quoted shall include all lead, lift, hire charges of machinery and equipments, cost of all materials, labour charges and all other incidental charges, etc., all complete as per the directions of the Engineer-in-Charge of the work. Note : Form work material contractors own property and shall be removed after completion of work.

Providing and rendering internal plastering in Cement mortar (1:3) of 12mm thick cement plaster finished with a floating coat of neat cement over brick work/block work / concrete surfaces. The rate quoted shall include all lead and lift, preparation of surfaces, curing of plastered surfaces, cleaning stains and dripping mortar from floors and walls, etc., hire charges of machinery and equipments, charges for providing & removing scaffolding wherever required, cost of all materials, labour charges and all other incidental charges, etc., all complete as per directions of the Engineer-in-Charge.

Supplying, fabrication and fixing in position of TMT reinforcement bars of grade Fe-500D or more for R.C.C work including straightening, cutting, bending, hooking, cranking, placing in position, lapping wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) up to plinth level including all lead and lift, hire charges of machinery and equipments, cost of all materials, labour charges and all other incidental charges, etc.., all complete as per directions of the Engineer-in-Charge of the work.

Demolishing R.C.C. work manually / by mechanical means without causing any damage to the surroundings including stacking of steel bars and disposal of unserviceable material within 50metres lead, hire charges of machinery and equipments, cost of all materials, labour charges and all other incidental charges, etc., all complete as per directions of the Engineer-in-Charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50m initial lead, for all leads including all lifts involved, etc., all complete as per directions of the Engineer-in-Charge.

Providing & fixing of 65mm nominal dia chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints, etc., all complete as per directions of the Engineer-in-Charge.

Providing & fixing of 65 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screewed end), etc., all complete as per directions of the Engineer-in-Charge.

Providing & fixing of 80mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screewed end), etc., all complete as per directions of the Engineer-in-Charge.

Providing & fixing of 65mm nominal bore (Horizontal) gun metal gate non return valve of approved quality (screewed end), etc., all complete as per directions of the Engineer-in-Charge.

Providing & fixing of 80mm nominal bore (Horizontal) gun metal gate non return valve of approved quality (screewed end), etc., all complete as per directions of the Engineer-in-Charge.

Supply, Fabrication & Erection of Structural steel work in single section, fixed with or without connecting plate without any damage to itself and surroundings including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, all lead & lift, hire charges of machinery and equipments, charges for providing & removing scaffolding wherever required, cost of all materials, labour charges and all other incidental charges, etc., all complete as per directions of the Engineer-in-Charge.

Providing and Laying in position Cement Concrete of 1:2:4 (1 cement : 2 coarse sand (zone3) derived from natural sources : 4 graded stone aggregate of 20mm nominal size derived from natural sources) excluding the cost of centering and shuttering for all work upto plinth level including all lead and lift, hire charges of machinery and equipments, curing, cost of all materials, labour charges and all other incidental charges, etc., all complete as per the directions of Engineer-in-Charge of the work.

Providing and fixing 110mm diameter on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion single socketed pipes, etc., all complete as per directions of the Engineer-in-Charge.

Providing and fixing on wall face unplasticised -PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, etc., all complete as per directions of the Engineer-in-Charge.

Coupler - 110mm

Single tee with door

Bend 87.5° - 110mm

Shoe (Plain) - 110mm

Rupees Seventeen Lakh Forty Two Thousand Six Hundred Seventy Seven and Thirteen Paise Only

Supply, installation, testing and commissioning of 5HP OPEN WELL - SUBMERSIBLE PUMPSET (Three phase) with control with starter/ control panel complete in all respects and as directed by Engineer-in-charge.

Supply, installation, testing and commissioning of 3 HP OPEN WELL - SUBMERSIBLE PUMPSET (Three phase) with control with starter/ control panel ., complete in all respects and as directed by Engineer-in-charge.

Supply & Laying 2.5 SqmmX 4 core flat cable per meter

Rupees Two Lakh Seventy Seven Thousand Six Hundred Seventy and Eighty Eight Paise Only

Rupees Twenty Lakh Twenty Thousand Three Hundred Forty Eight and One Paise Only

Approximate Amount Put to Tender

Rupees Three Lakh Sixty Three Thousand Six Hundred Sixty Two and Sixty Four Paise Only

Rupees Twenty Three Lakh Eighty Four Thousand Ten and Sixty Five Paise Only