REPAIR AND MAINTENANCE OF INTERNAL ELECTRIFICATION, DISTRIBUTION BOARD AND SUB MAIN WIRING AND ALLIED WORKS IN MD AND OTM ACCN AT MIL STN KALKA UNDER GE (I) JUTOGH

Amount

Taking down carefully point wiring from existing place (light/ fan, socket or power points complete) with all fittings such as switches, sockets ceiling rose, pendant holder, fitting and fixtures, MCB, Main switches, call bell etc and making good to disturbed surface to wall, floor etc to match with existing surface either by using same colour distemper or white colour wash complete all as specified and directed.

Taking down carefully unserviceable main switches and distribution boards (single phase or three phase) of any capacity with Isolators/ MCBs/ MCCBs and making good disturbed surfaces and matching with existing colour wash complete all as specified and directed.

Taking down carefully old unserviceable sub main wiring and making good disturbed surfaces and matching with existing colour wash complete all as specified and directed.

M&L for point wiring complete with 1100 volts grade PVC FRLS-H insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including new PVC rigid concealed conduit, medium grade of suitable size (not less than 20mm dia) duly ISI marked with all accessories such as bends, reducers, spacers, saddles, junction boxes, bakelite sheets and various sizes hylam sheets for mounting switch/ sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed, stranded (Green colour) connected to common earth dolly for One light/ fan/ bell/ Bldg security light point controlled by one single pole one way switch, complete all as specified and directed.

All as per Srl item No. 04.00 but for one 3 pin, 5 Amp, socket outlet on the independent board controlled by one single pole one way switch board, complete all as specified and directed.

All as per Srl item No. 04.00 but for one 3 pin, 5 Amp, socket outlet on the same board controlled by one single pole one way switch board complete all as specified and directed.

All as per Srl item No. 04.00 but for wiring with 2.5 sqmm copper cable and 2.5 Sqmm copper cable as continuous earth wire for one 6 pin 6/16 Amps socket out let on independent board complete all as specified and directed.

All as per Srl item No 04.00 above but in existing conduit pipe One light point/ fan/ bell point controlled by one single pole one way switch, complete all as specified and directed.

All as per Srl item No 06.00 above but in existing conduit pipe complete all as specifed and directed.

All as per Srl item No 07.00 above but in existing conduit pipe complete all as specifed and directed.

All as per Srl item No 08.00 above but in existing conduit pipe complete all as specifed and directed.

S&F in repair switch piano type 240 V, 5 Amp , Single pole one way flush type, complete all as specified and directed.

S&F in repair Socket 5 pins, 6 Amp, flush type piano (multi purpose), complete all as specified and directed.

S&F in repair socket 15 Amps flush type 230 Volts , AC complete all as specified and directed.

S&F in repair switch 15 Amps flush type 230 Volts , AC complete all as specified and directed.

M&L for fan regulator, 100 watt compatible with BLDC Fan, 240 Volt single phase one module suitable for ceiling fan complete all as specified and directed.

S&F modular switch 1 way 6 Amp, 1 module, 240 V, flush type, complete all as specified and directed.

S&F modular bell push, flush type, 6 Amp, 1 module, 240 V complete all as specified and directed.

S&F modular socket, 6A-2/3 pin combined, 2 module, 240 V complete all as specified and directed.

S&F modular socket, 6Amp / 16Amp-2/3 pin combined, 2 module, 240 V complete all as specified and directed.

S&F modular switch 1 way 16 Amp, 1 module, 240 V flush type complete all as specified

S&F modular fan step regulator socket type suitable/ compatible with BLDC Fan, 100 W, 2 module, 220-240 V complete all as specified and directed.

S&F Modular white cover plate with frame including modular metal flush box, 1 module, complete all as specified and directed.

S&F Modular white cover plate with frame including modular metal flush box, 3 module, complete all as specified and directed.

S&F Modular white cover plate with frame including modular metal flush box, 4 module complete all as specified.

S&F Modular white cover plate with frame including modular metal flush box, 6 module, complete all as specified and directed.

S&F Modular white cover plate with frame including modular metal flush box, 12 module, complete all as specified and directed.

S&F in repair ceiling rose polycarbonate body, 65 x 20 mm three terminal, complete all as specified and directed.

S&F in repair for lamp holder pvc body with back plate complete all as specified and directed.

M&L for replacement of call bell electric (ding dong type) , 240 Volt , single pole, complete all as specified and directed.

S&F in repair VTPN MCCB distribution board 4 way fabricated out of thick high quality CRCA sheet, DBs shall be totally enclosed, suitable for 240V/415V, having polyurethane (PU) foam gasket to ensure IP-54 degree of protection for Indoor application as pre IEC 61439-3:2012 (CI. 10.3)/ IEC 60529. DB shall be robust with tested for impact resistance IK09 as per IEC 61439-3:2012(CI.No. 10.2.6). DBs shall be provided with prefitted cement Guard. DB Door shall have detachable gland plates provided with proper knockout holes of 26mm/35mm diameter for intsertion of cable /conduits. Distribution Boards shall bre provided with wire set of copper along with the insulated fork type bus bars. DB shall heve reversible hinged doors and possibility to allow door opening from left to right or right to left for convenience on site. DB shall have type test reports as per IEC 61439-3 from ERDA or NABL laboratery complete all as specified and directed.

S&F in repair VTPN MCCB distribution board 4 way fabricated out of thick high quality CRCA sheet with MCCB thermal based release adjustable type 4 pole 100 Amps 50 Hz 415 Volts with rupturing capacity 36 KA, DBs shall be totally enclosed, suitable for 240V/415V, having polyurethane (PU) foam gasket to ensure IP-54 degree of protection for Indoor application as pre IEC 61439-3:2012 (CI. 10.3)/IEC 60529.DB shall be robust with tested for impact resistance IK09as per IEC 61439-3:2012(CI.No. 10.2.6).DBs shall be provided with prefitted cement Guard. DB Door shall have detachable gland plates provided with proper knockout holes of 26mm/35mm diameter for intsertion of cable /conduits. Distribution Boards shall bre provided with wire set of copper along with the insulated fork type bus bars. DB shall heve reversible hinged doors and possibility to allow door opening from left to right or right to left for convenience on site. DB shall have type test reports as per IEC 61439-3 from ERDA or NABL laboratery complete all as specified and directed.

S&F in repair TPN Distribution board 4 way fabricated out of thick high quality CRCA sheet, DBs shall be totally enclosed, suitable for 240V/415V, having polyurethane (PU) foam gasket to ensure IP-54 degree of protection for Indoor application as pre IEC 61439-3:2012 (CI.10.3)/IEC 60529. DB shall be robust with tested for impact resistance IK09as per IEC 61439-3:2012 (CI.No. 10.2.6). DBs shall be provided with prefitted cement Guard. DB Door shall have detachable gland plates provided with proper knockout holes of 26mm/35mm diameter for intsertion of cable /conduits. Distribution Boards shall bre provided with wire set of copper along with the insulated fork type bus bars. DB shall heve reversible hinged doors and possibility to allow door opening from left to right or right to left for convenience on site. DB shall have type test reports as per IEC 61439-3 from ERDA or NABL laboratery complete all as specified and directed.

S&F in repair sheet metal enclosures for MCB distribution board SPN 12 way double door type with 200 amp rated bus bar and suitable for MCB SPN as incomer complete all as specified and directed.

S&F in repair sheet metal enclosures for MCB distribution board SPN 8 way double door type with 200 amp rated bus bar and suitable for MCB SPN as incomer complete all as specified and directed.

S&F in repair sheet metal enclosures for MCB distribution board SPN 4 way double door type with 200 amp rated bus bar and suitable for MCB SPN as incomer complete all as specified and directed.

S&F in repair MCCB thermal based release adjustable type 3 pole 100 Amps 50 Hz 415 Volts with rupturing capacity 16 KA min including testing, complete all as specified and directed.

S&F in repair MCCB thermal based release adjustable type 4 pole 100 Amps 50 Hz 415 Volts with rupturing capacity 16 KA min including testing, complete all as specified and directed.

S&F in repair MCB SP 6-32 Amp ,240 V 10 KA incl all terminals , fittings etc. complete all as specified and directed.

S&F in repair MCB SPN, 240 volts, 40 to 63 Amps, rupturing capacity 10 KA, complete all as specified and directed.

S&F in repair MCB TPN 63 Amps, complete all as specified and directed.

S&F in repair MCB protected socket (modular AC box) 3 ModuleIN sheet steel / plastic box (with SP mini MCB of 'C' series 25 Amps) complete all as specified and directed.

M&L for sub main wiring with two runs of single core 4 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 grade FRLS-H cable drawn and PVC rigid conduit min 20 mm dia with all necessary fittings and accessories and one run of PVC insulated and unsheathed single core cable with copper conductor of size 4 Sqmm as earth wire (green in colour) run through PVC rigid conduit and connected to common earth dolly , including taking out the old sub main wiring complete all as specified and directed. Note: Two run of cable and one run of PVC conduit and one run of earth continuity wire shall be measured as one run.

M&L for sub main wiring with two runs of single core 6 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 grade FRLS-H cable drawn and PVC rigid conduit min 20 mm dia with all necessary fittings and accessories and one run of PVC insulated and unsheathed single core cable with copper conductor of size 6 Sqmm as earth wire (green in colour ) run through PVC rigid conduit and connected to common earth dolly , including taking out the old sub main wiring complete all as specified and directed. Note: Two run of cable and one run of PVC conduit and one run of earth continuity wire shall be measured as one run.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6, type C-2, all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified including all earth work excavation, returning filling and disposal of surplus soil and testing on completion, complete all as specified and directed.

S&F in repair 20W, 6500K, 4 feet LED tube light fitting, energy efficient, 240 volts, fixed on wall/ ceiling etc incl. connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

S&F in repair/ replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repair LED bulb of 9 watt, B22 base, 6500K complete all as specified and directed. Make: Bajaj/ Philips/ Havells

S&F in repair LED Post top 20 watt decorative type, made of cast aluminium with decoratice opal polycarbonate diffusar with IP-65 protection including fixing with suitable size GI pipe, masonary work as required on the top of gate pillar including all fixing accessories complete all as specified and directed.

S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, suitable size bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and directed.

S&F in repair Capacitor (ISI Marked) 2.5 mfd complete all as specified and directed.

S&F in repair 1.5 Sqmm (Nominal area) FRLS-H PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor complete all as specified and directed.

S&F in repair 2.5 Sqmm (Nominal area) FRLS-H PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor complete all as specified and directed.

S&F in repair PVC casing n capping of 20mm (1") width complete all as specified and directed.

S&F in repair Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal box type with PVC Box complete all as specified and directed.

S&F in repair Switch socket combination 3 pin, 5 Amp flush type universal box type with PVC Box complete all as specified and directed.

S&F 3 core 1.5 sqmm PVC insulated and FR PVC round sheathed copper conductor flexible 1100 volts for connection from cable Junction Box to street light fittings including proper clamping of cu conductor all as specified and directed.

S&F 4 core 2.5 sqmm PVC insulated and FR PVC round sheathed copper conductor flexible 1100 volts for connection from cable Junction Box to street light fittings including proper clamping of cu conductor complete all as specified and directed.

M&L for preparing old decorated plastered or unplastered surfaces of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying two coats of oil bound distemper, complete all as specified and directed.

Supply, fixing, testing & commissioning of IP65 rated Inverted Pyramid Tripod type LED Bollard light with soft 360º light distribution with 10 watt Cold white bulb / unique concept LED Bollard light in IP-66, 10 Watt Cold white, prefixed on suitable height pipe, fixed on PCC coping with proper light point connection complete all as specified and directed. Make: Crompton Cat Part No LBLSN-10-CDL , Havells Cat Part TURINBLS10WLED830PSYMTOPC or equivalent as in Halonix

Supply, laying, jointing and testing of cable XLPE insulated, screened, PVC bedded ,galvanized steel strip or wire armoured heavy duty electric cable with multistranded aluminium conductor, 1100 volts grade, laid in trenches or duct or passing through pipe or fixed to poles walls of size 10 Sqmm 2 core confirming to IS: 7098 (Part-1) complete with proper thimbles, complete all as specified and directed.

S&F in repair 1100 volts grade heavy duty 6 Sq mm 2 core service cable PVC insulated aluminium Stranded conductor, served with inner shething of PVC sheathed in service conections suspended by insulating hangers and procelean beat not more than I metre apart including 4Sqmm suspension wire, one twin core cable flat or circular, complete all as specified and directed.

Supply and Laying concealed rigid non-metallic PVC conduit 25mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc including taking out the existing cable and relaying the same complete all as specified and directed.

S&F in repair LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

S&F in repair LED recessed downlighter 09W/10W, 6500K/ 4000K/ 3000K, cut out around 100/107 mm in Radius energy efficient, 240 volts, fixed on ceiling etc incl. connecting up with existing copper conductor wire of suitable size, complete all as specified and directed.

S&F in repair High efficiacy 1x1 recess LED flat panel with high brightness LED for glare-free homogenous illumination. Also for POP ceilings (supplied with wedge brackets). Fixture size: (LxWxH) in (295x295x70) mm & proper fixing in ceiling with cutting & finishing work as required complete all as specified and directed. Make: Havells Cat Part PLUTO1X1PLR15WLED840S or equivalent as in Cromton/ Halonix

S&F indoor decorative wall brackets light fixture made up of Polycarbonate, suitable for 9 W LED lamp B22 base with plastic body suitable for 09/10W LED Bulb complete with 9/10 W LED Bulb complete all as specified and directed.

S&F metal clad single pole and a neutral enclosure with a two pin and earth plug and socket with one single pole MCB SP 20 Amp, 240V, complete all as specified and directed.

S&F in repair exhaust fan heavy duty with louvers complete of sweep size 300mm, 900 RPM, single phase, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified and directed.

S&F in repair exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm including fixing all arangements, complete all as specified and directed.

M&L for servicing of storage type water heater (Geysers) 25 ltr capacity any make by disconnecting electrically and mechanically from all existing lines, opening of bottom and top for inspection complete incl base plate, heating element and copper tank, cable, PVC pipe etc., cleaning carefully and reassembling after necessary repair/ replacement as specified here-in-after and replacement of old unserviceable nut/ bolts and fixing in the same position, complete all as specified and directed. Note :- Spare parts shall be measured and paid separately.

Supply only heating element 1500 watts push type with gasket ISI marked triangular type, complete all as specified and directed.

Supply only thermostatic switch suitable for Gysers of any make/ type with temperature range adjustable type 25 to 80 degree centigrade superior quality 20 Amps 220 Volts AC Supply complete all as specified and directed.

Supply only Incoloy Heating Element 111884-EV for Geyser complete all as specified and directed.

Supply only Bajaj Heating Element as per IS 4159, complete all as specified and directed.

Supply only syphon assembly suitable for 25 Ltrs capacity Geysers of Make Venus/ Bajaj with heating element, Rubber gasket as per site requirement as per site complete all as specified and directed.

Supply only assembly suitable for 25 Ltrs capacity Geysers of any Make as per site requirement of any type having 6/9 hole as per site complete all as specified and directed.

Supply only PVC connection of 450 mm long & 15 mm dia with brass nut at both end suitable for Geysers complete all as specified and directed

S&F in replacement 3 pin, bakellite top of 16 Amp, capacity, 240V, only for repalcement of burn/ unsv top for geyser, complete all as specified and directed.

R N Enterprises (BID ID -3425215)

CHADHA ENGINEERS (BID ID -3426952)

m/s jupiter builders (BID ID -3420891)

M/S Dahiya Builders (BID ID -3425183)