EMPANELMENT OF AGENCIES FOR SELECTION OF AGENCIES FOR SUPPLY AND INSTALLATION OF FURNITURE FOR SCERT AND TEACHER EDUCATION INSTITUTES (TEI?s) OF BIHAR

STATE COUNCIL OF EDUCATION RESEARCH & TRAINING, BIHAR

NIT Reference No. SCERT/Furniture/2025-26/01

Name of the bidder

Contact details & Email Id

Sl. No. Specification PER UNIT RATE including 2 years on site Comprehensive Warranty and all Taxes (In Rs.) [A] 3 years on site maintenance services post completion of comprehensive warranty period ( in Taxes) [B] Total Cost ( in Rs) [A+B]

1 Supplying & Installing of Table with Glass, of size 2350x2350x750 - Main Table with size 2350 x2350 x750 Primary Work Surface- Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top soft closing access flap with in-build power box are provided on work surface for wire management. Secondary Work Surface- Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Modesty Panel- Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Under structure- Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal- Made of 25mm Thick Pre-laminated twin board o E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals provided with lock for security.

2 Supplying & Installing of High Back-office chair - HIGH BACK CHAIR WITH SEAT DEPTH ADJUSTMENT SEAT ASSEMBLY: The Cushioned seat is made of Injection moulded Plastic outer & inner. Plastic Inner is upholstered with pure leather and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3, and hardness load 16 ± 2 kg. as per IS:7888 for 25% compression. Seat SIZE: 47.6 cm. (W) x 49.2 cm. (D) BACK ASSEMBLY: The Cushioned back is made of PU Foam with insitu moulded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Pure Leather. HIGH BACK SIZE: 47.5 cm. (W) x 77 cm. (D) ARMRESTS -The armrest top is moulded from polyurethane (PU), upholstered in pure leather and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S E.R.W tube having chrome plated finish. The armrest height adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-SYNCHRO MECHANISM - The adjustable ting mechanism is designed with the following features, 360° revolving type. • Front pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing is made up of HPDC Aluminium black powder coated. SEAT DEPTH ADJUSTMENT- Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0±0.5 cm. ADJUSTABLE BACK SUPPORT -Back Frame is connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. PNEUMATIC HT. ADJUSTMENT -The pneumatic height adjustment has an adjustment stroke of 10.0±0.3 cm. PEDESTAL ASSEMBLY The pedestal is High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal is 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) as per direction of Engineer-in-charge.

3 Supplying & Installing of Full Height Swing Door Storage - Product Size- 91.6cm x 198cm x 48.6cm. Construction- Manufactured from prime quality cold rolled close annealed mild steel, conforming to Japanese Industrial Standards JISG 3141 SPCC (Steel Plate Cold Commercial) SD. Rigid Knockdown Construction. Configuration- Full Height Glass Hinged Door. Material- All the Panels are made from 0.6 mm thick CRCA. Locking & Handle- Recessed Handle Cum Cam Lock. Shelving - 4 Nos. of Adjustable Shelve. - Uniform Distributed Load Capacity per Shelf is 30 kg. Top - Metal Top Only. Finish- Epoxy Powder Coating to the thickness of up to 100 microns. Levelers - No Leveler Provision.

4 Supplying & Installing of Computer Table with Computer Chair - Table - Overall Size (Width X Depth X Height): (+/-1) mm .Length: 900 mmWidth: 590 mm.L x W x H (Carton 1 of 1) 950 X 635 X 130 mm /Net Wt: 21.3 kg /Gross Wt: 23.3Kg.Raw Material (specs of laminations & thickness): PLB top .PLB: 25 mm for table top with 2.0 mm thick PVC lipping.Metal Parts: MS ERW Tube , MS CRCA sheets & MS Bright Bar. Powder coated : 35 microns Minimum. Multi-colored Modesty.Nut & Bolts , 5 Glide screws ,Self Tapping Screws .Construction: Knock down fitting. with Chair- SEAT/BACK ASSEMBLY: The seat and back are made up of 1.2 cm thick hot pressed plywood, upholstered with fabric and moulded Polyurethane foam with PVC lipping all around. The back foam is designed with contoured lumbar support for extra comfort. SIZE: 41.0cm. (W) X 46.0cm. (H). POLYURETHANE FOAM: The Polyurethane foam is moulded with density = 45 +/-2 kgs. / M3 and Hardness = 20 +/-2 on Hampden machine at 25% compression. ARMRESTS- The armrest is made of black integral skin polyurethane with 50-70 Shore A hardness and reinforced with MS insert. The P.U. armrest is fixed to black powder coated armrest bracket made of 0.5cm thk. H.R. Steel. PEDESTAL ASSEMBLY: The pedestal is fabricated from 0.2cm. thick CR steel, powder coated and fitted with an injection moulded black Polypropylene hub cap and 5 nos. twin wheel castors.(castor wheel dia. 5.0cm.)The pedestal is 55.0cm. pitch-center dia. (65.0 cm with castors).

5 Supplying & Installing of Visitor Chair SEAT/BACK ASSEMBLY: The seat is made up of 1.2 cm. thick hot pressed plywood upholstered with fabric and moulded Polyurethane Foam. The back is made up 1.2 cm. thick hot pressed plywood upholstered with replaceable fabric upholstery covers and moulded polyurethane foam. The back ply and foam is designed with contoured lumber support for comfortable seating posture. MID BACK SIZE 48.0cm.(W) X 64.5cm.(H), SEAT SIZE 51.0cm.(W) X 48.0cm.(D). POLYURETHANE FOAM: The polyurethane foam for seat and back is moulded with density = 45±2 kg/m3 and Hardness = 20±2, ARMRESTS: The armrest top is made of moulded polyurethane (P.U) and mounted on to a fixed type M.S. tubular armrest support chrome plated. The arm support has static vertical adjustment of ±1.5cm. FIXED BACKREST: The backrest consists of a fixed type mechanism i.e no back up/down adjustment, LEG FRAME ASSEMBLY: Leg frame welded assembly made from 35 X 15 X 16BG (1.6THK) Elliptical M.S ERW tube with base plate chrome plated for seat fixing.

6 Supplying & Installing of Notice Board with size 4' X 3' Surface Material-woolen felt / fabric in various colours, Core material-9 mm thick soft board, Backing Material-0.62 mm to 0.82mm thick laminate sheet with extra melamine surface mix colour OR 0.16 to 0.25 mm thick ISI mark GP sheet, Aluminium frame-Anodized 5 microns extruded aluminium section designation 63400 as per IS:1285- 2002 - 16 mm thickness per direction of Engineer-in-charge.

7 Supplying & Installing of Mid Back Chair for PERSON The seat and back are made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. Dimension BACK SIZE - 47.5 cm. (W) x 58.0cm. (H) & SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D). POLYURETHANE FOAM: The Polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 at 25% compression. 3) ARMRESTS: The one-piece armrests are injection moulded from black Co-polymer Polypropylene. 4) CENTER TILT SYNCHRO MECHANISM . PNEUMATIC HEIGHT ADJUSTMENT -The pneumatic height adjustment has an adjustment stroke of 12.0 cm. TELESCOPIC BELLOW ASSEMBLY: The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. PEDESTAL ASSEMBLY: The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.0cm pitch-center dia. (76.0 cm with castors.) TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black Nylon Product.

8 Synergy Heavy Duty Stainless Steel Double Pole Foldable Cloth Dryer Stands/Clothes Drying StandDrying Length 4 ft Closed Width 177.8 cm Open Width 42.672 cm Open Height 173.736 cm Open Depth 25.2 inch

9 Supplying & Installing of Desk cum Bench of size 1240 x 1130 x 757Desk-Top Panel-All panels are made from 18mm thk Pre-laminated twin board (E1/P2 GRADE) with PVC edge banding on all sides.The panels have cornersrounded for safety usage Understructure:All side metal frames and cross connectors are made from combination of 25.4 x1.2 mm thk(approx. 18 SWG) Round ERW tubes ,31.8 x 1.2 mm thk(approx. 18 SWG) Round ERW tubes and 28.6 x 1.2 mm thk(approx. 18 SWG) Round ERW tubes(As per IS:7138) which are welded together.The Welded structures and cross connectors are coated with min. 45 micron thickness of epoxy polyester coating.Back supports which are provided at the rear back are made of 50.8 x 25.4 x 1.2 mm thk(approx. 18 SWG) rectangular ERW tubes(As per IS:7138).The tubes are coated with min. 45 micron thickness of epoxy polyester coating.The storage shelves are made from 0.6 mm thk MS sheet(As per IS:513) fixed below the radesk top panel and are coated with min. 45 micron thickness of epoxy polyester coating. Hooks are provided on the vertical side frames on both sides of the desk for hanging bags/bottles. They are made from 2 mm thk MS sheet(As per IS:513) and are coated with min. 45 micron thickness of epoxy polyester coating. The understructure is assembled using M6 trilobularscrews(As per DIN 7500)with Zn blue plating. Compact Laminate seat and back panels are assembled using M6 Countersunk Trilobular screws(as per DIN 7500) with Zn Black Plating (As per IS 1573:1986) Spacers Are provided on th top of round tubes for wooden panels fixing. They are made of made Glass filled (30%) Plastic Caps made of PP copolymer(3530 Grade) are also provided on the rear frames adding more aestheic value to the product. M6 high tensile TVS make bolt(Class 8.8) with glasss filled nylon level adjustors are provided at the bottom of understructure to take care of unevenness in floor with height adjustment of approx 15mm.

10 Supplying & Installing Notice Board Stand 5 FT Heavy Duty Folding Easel Stand for White Board | Black Board| Notice Board| Sun Board | Presentation| Office | Display| Advertisement (Can Hold Upto 3X4 Feet Whiteboards) Prime Quality CR Steel, Powder Coated, Lightweight And Sturdy and Adjustable Height suitable for a board up to 3x4 Feet. Easy-lock pad holder for securely holding a flip chart, easel pad, or poster board. One Stop Solution For Painting, Presentation, Advertisement, Training And Display Requirements, Flexible Fold type design To Ensure Minimum Vibrations While Working. And occupying no space when not in use.

11 Supplying & Installing of Wooden Podium with Dimensions: 45" H x 20" W x 15" D TO 50" H x 25" W x 20" Presenter Side Height: 40" TO 45" Shelves: 20" H x 20" W x 10" D TO 25" H x 25" W x 12" D Product Weight: 50 TO 55 lbs.Shipping Weight: 65 TO 70 lbs. Material: Scratch Resistant High-Pressure-Laminate.The top of the table shall be provided 19 mm OST. The table shall be neatly finished and polished

12 Supplying & Installing of Reception Table of size 1220mm W x 914mm D x 1080mm H. Work Surface-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Edge banded with matching 2 mm thick PVC lipping. Understructure-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990.

13 Three Seater Chair with Common Arms - seat shell : the seat shell should be a welded assembly of seat,back and side frame. the seat and back should be made of 0.12±0.013cm thk cr steel sheet with oblong perforations.they should be welded to sideframe of size 3.2±0.05cm x 0.5 ± 0.05 cm thk hr steel.the welded assembly should be powder coated ( dft 40-60 microns ). the seat has a front water fall edge to provide popliteal clearance for comfortable seating. it also has a buttock support curve that not only provides rear support but also prevents small children from falling through the gap between seat and back. clean and flat surfaces of seat and back aids in easy maintenance. * seat size : 47.8 cm (w) x 44.6 cm (d) * back size : 41.6 cm (w) x 23.0 cm (h) understructure assembly: understructure assembly consshould be ts of connecting beam and leg assembly made of m.s. e.r.w. oblong tube of size 7.5±0.03cm x 2.5±0.03cm x 0.2±0.016cm thk.the welded structure assembly should be powder coated ( dft 40-60 microns ).the leg assembly should be fitted with shoes and levellers in nylon. the leg structure should be designed with Three Seater Chair with Common Arms - seat shell : the seat shell should be a welded assembly of seat,back and side frame. the seat and back should be made of 0.12±0.013cm thk cr steel sheet with oblong perforations.they should be welded to sideframe of size 3.2±0.05cm x 0.5 ± 0.05 cm thk hr steel.the welded assembly should be powder coated ( dft 40-60 microns ). the seat has a front water fall edge to provide popliteal clearance for comfortable seating. it also has a buttock support curve that not only provides rear support but also prevents small children from falling through the gap between seat and back. clean and flat surfaces of seat and back aids in easy maintenance. * seat size : 47.8 cm (w) x 44.6 cm (d) * back size : 41.6 cm (w) x 23.0 cm (h) understructure assembly: understructure assembly consshould be ts of connecting beam and leg assembly made of m.s. e.r.w. oblong tube of size 7.5±0.03cm x 2.5±0.03cm x 0.2±0.016cm thk.the welded structure assembly should be powder coated ( dft 40-60 microns ).the leg assembly should be fitted with shoes and levellers in nylon. the leg structure should be designed with minimal should be a of contact close to ground providing easy access for cleaning purposes. the shoes fitted to leg assembly help in aligning the structure for back to back arrangements. levellers take cshould be of uneven flooring. connecting beam should be fitted with snap locking end cap.lt also aids in side-by-side understructure alignment arm rest assembly: armrest assembly consshould be ts of armrest frame and armrest pad . the armrest frame should be made up of size 3.175±0.05cm x 0.47±0.027cm thk hr steel and it should be powder coated ( dft 40-60 microns ). armrest pad should be injection molded in nylon and should be fitted onto the armrest frame.

14 Supplying & Installing of Chair Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm.

15 Supplying & Installing of Modular PLT Conference Round Table for Academic Block (Conference Hall)-Material of work top -25 mm thick prelaminated particle board, Table top plain side-Edge banded with PVC tape of 2 mm thick with help of hot melt glue, Material of Gable end and modesty panel-18 Mm Thick Three Layers Prelaminated Particle Boards Of Grade-II Type-III Of IS:12823/Latest Both Sides Particle Boards Matching With Top Shade In Grade-II Type-III, Length of Each Seat of Work Top ± 20 mm- 675 mm for single AND 1350 mm For dual,Depth of Work Top-600mm, Height of Work Top-750 mm, Corners of work top -850 mm, Table top finish-Laminate In Colour With matt Finish 0.6-0.8 Mm Thickness Of Type S,F Or P Having Index Number 3.2.3 Conforming To IS:2046/Latest With Having Balancing Laminate Of 0.5 Mm Thick On Other Side.

16 Supplying & Installing of ALL STEEL PERIODICAL DISPLAY RACK- Overall Dimensions of All Steel Periodical Display Rack shall be 900mm(W)x450mm(D)x1830mm(H). Rigid Knockdown construction ,Panels shall be made from CRCA 0.6 mm thick and front frame shall be made from CRCA 0.8 mm thick . CRCA D grade as per IS 513 . There shall be 5 level racks , Display tray shall be suitable for fullscape size magazines,periodicals, aesthetically appealing metal tray at an angle for easy viewing . Receding facility to access the storage behind . Sliding on plastic rollers . Behind storage shelving each of 5 level has a behind storage shelf . Uniformly Distributed Load capacity per each shelf is 40 kg . Leveler shall be screw type with hex plastic base and finish shall be epoxy polyester powder coated to the thickness of 50 microns.

17 Supplying & Installing of Wall Sided Book Rack - Overall Size WxHxD - Single Body 1200W : 1200 x 2078** x 300, Placement - Single body bookrack should be always against wall. Body- a. Side panels, Frame & Cross L bracket are made using 0.8 mm CRCA (IS:513). b. The assembly consists of 2 tie rods, 4 fixing brackets and 2 turnbuckles. The tie rods are fixed in a shape of ‘X’The tie rods are made of 4mm diameter rods of MS while fixing brackets are made of 2mm thick. CRCA IS:513 Grade. c. Optional wooden panel of 25mm thk PLT, E1-P2 grade board for PLT ref. Specification - FF04/DSN/STD/101, edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. Under Structure - a. Under structure is made of 0.8m CRCA (IS:513). b. Sizes of under structure for single body : 1. 1200W x 295D x 80H, Shelves - a. Shelves used are 10 bend panel made of 0.8mm CRCA (IS:513). b. Shelf panels are placed on shelf support and then fixed using nut and bolts from below. c. Standard config. consists of 6 loading levels formed by 5 no of adjusted shelf for each main and add on unit. d. Uniformly Distributed Load Capacity per each shelf is 80 Kg maximum. Construction - Completely Knock down construction. Finish- All MS sheet metal and metal frame components are powder coated with epoxy polyester powder to the min thickness of min 45 microns.

18 Supplying & Installation of Seat- SHELL : The single piece seat back shell is made up of injection moulded high impact strength glass filled polypropylene polymer compound (refer product catalogue for colour chart). * SHELL SIZE : 44.0 cm. (W) x 50.2 cm. (D) x 40.5 cm. (H). M.S. POWDER COATED UNDERSTRUCTURE OPTION (SM6): The powder coated (DFT 50±10 microns) welded tubular frame is made from ∅ 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm M.S. E.R.W tube. The 0.16 ± 0.008 cm thick CRCA sheet is welded to tubes for fixing shell to the frame. The shoe is made of high impact strength polypropylene polymer compound and are fitted at the end of the tubular frame.

19 Supplying & Installation of Wall Mounted Study Table - of size 800mm W x 450mm D. Top Material -MDF, Frame Material - Mild Steel, Finish - Walnut Brown, Multi purpose wall mounted desk. Work Desk of 800 Width x 450 Depth , Robust Folding Mechanism to operate the desk, Load Bearing Capacity : 8 kgs. The desk is meant for usage of laptop with its accessories, or it can also be used for study purpose where it can take the weight of a few books and small items.

20 Supplying & Installation of 2 Door PLU Lockers with Cam Lock - Size -375(W) x 470(D) x1950*(H). Height including leveler. Height of leveler is 50mm and adjustment possible is 15mm. Construction & Material - Aesthetically appealing completely knock down construction. The add-on units are stack widthwise to form a row of lockers. Legs fitted with screw type leveler. Made from combination of Top panel (0.5mm CRCA), side panel (0.5mm CRCA), Bottom panel (0.5mm CRCA), Back panel(0.5mm CRCA), Top Battom stiffener (1.2mm CRCA) and End Cover (0.5mm CRCA). -CRCA 'D' Grade as per IS-513. Door - Made from 0.6mm Thick CRCA (D Grade, IS-513). Soft closing hinge. Door Size- For 2 Door locker - 373(W) X 18(T) X 948(H). Shelving - It is a 10 bend panel made of 0.5mm Thick CRCA (D Grade, IS-513). 3 Shelves for 4 Door locker. Lock Options - Cam Lock- Oval knob that functions as a handle. Click action mechanism. Key removal in locked and unlocked position. Zinc alloy die cast housing. Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/- 10 micron). Accessories (Hanging Rail)- Hanging Rail option available only in 2 Door Locker. It comprises of 2 injection moulded holders mounted on the shelf and a hanging rod. Hanging rod is made of Aluminium and is silver anodized.

21 Supplying & Installation of Half Height Swing Door Storage-in boys & girls hostel dormitory- Product Size - 914 mm (W) x 463 mm (D) x 914 mm (H). Construction- Manufactured from prime quality cold rolled close annealed mild steel, conforming to Japanese Industrial Standards JISG 3141 SPCC (Steel Plate Cold Commercial) SD. Rigid Knockdown Construction. Configuration- Half Height Steel Hinged Door. Material - All the Panels are made from 0.6 mm thick CRCA. Locking & Handle- Plastic Recessed Handle Cum Cam Lock. Shelving - 1 No. of Adjustable Shelf - Uniform Distributed Load Capacity per Shelf is 30 kg. Top- Metal Top Only. Finish- Epoxy Powder Coating to the thickness of up to 100 microns. Levelers -No Leveler Provision.

22 Supplying & Installation of Half Height Swing Door Storage-in boys & girls hostel dormitory- Product Size - 914 mm (W) x 463 mm (D) x 914 mm (H). Construction- Manufactured from prime quality cold rolled close annealed mild steel, conforming to Japanese Industrial Standards JISG 3141 SPCC (Steel Plate Cold Commercial) SD. Rigid Knockdown Construction. Configuration- Half Height Steel Hinged Door. Material - All the Panels are made from 0.6 mm thick CRCA. Locking & Handle- Plastic Recessed Handle Cum Cam Lock. Shelving - 1 No. of Adjustable Shelf - Uniform Distributed Load Capacity per Shelf is 30 kg. Top- Metal Top Only. Finish- Epoxy Powder Coating to the thickness of up to 100 microns. Levelers -No Leveler Provision.

23 Supplying & Installation of Mattress For Single Bed– 198cm x 91cm ; 4-6” thickness.

24 Supplying & Installation of Three Seater Sofa size 1810mm W x 850mm D x 725mm H , Single Seater Sofa size 775mm W x 850mm D x 725mm H. Material -Fabric, • Designed as an affordable solution that doesn’t compromise on function and comfort. • Consists of three modules that can be combined to form living room layouts, or used individually to create cosy corners in a home. • Frame crafted from Pinewood that’s obtained from New Zealand’s forests, treated to be knot-free and termite resistant to increase the durability of the sofa. • Three-seater shape isdefined by clean and straight lines making it versatile and easy to style. • Soft and padded edges make for a safe, childfriendly addition to spaces. with Coffee Table of size Dimensions W x H x D (cm) - 120 x 45 x 60, Finish Color - Remini Walnut, Primary Material - Prelaminated Particle Board, Style- Contemporary & Modern.

25 Supplying & Installation of 8 Seater Canteen Table With 8 Chair PU Coated size shall be 232.9 cm x 117.5 cm x 75 cm . 232.9 cm117.5 cm . PU coated Top (with Powder Coated Understructure) and Membrane Top (with Stainless Steel Understructure) Combination color graphics on the centre . Brown Laminate on bottom specially profiled edges for comfort . The Understructure shall be having bend pipe structure of MS powder coated . Pipe dia 38 mm , 2 mm thick and it shall be fitted with top by SS machine screws . Legs shall be of MS powder coated and 38 mm dia. pipe legs are fixed with inderstructure and table top . Glide shall be of Plastic fixed at the understructure to prevent the damage of table top during stacking.

26 Supplying & Installation of Queen size Box Bed for Bed Rooms of dimensions Length - 2060.0 mm Width - 1733.0 mm Height - 930.0 mm.The materials made of Bed Structure consist of metal frames made of M.S. Channels in 1.0 mm Thickness.Horizontal plinths and bottom plinth are made of 25 mm Thick Prelaminated Particle Board.Head board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Tail board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Side rail is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed on to it.Mattress panels of Bed are made of 18 mm thick Prelaminated Particle Board with all the exposed edges are edge banded with 0.8 mm thick PVC edge banding.Finish is of 18 mm thick Prelaminated Particle Board is in Walnut shade.Metal frames are powder coated in shade Mat Black to the thickness of 50 microns(+-10) with rigid knock down construction as per direction of Engineer-in-charge.Mattress Size King Bed – 78” x 60” ; 4-6” thickness with Bedside Table - Dimension – mm Overall width - 415 Overall depth – 355 Overall height - 435 One drawer and one open shelf, Material used - Rubberwood, Finish - Black with Mattress of size 78"x60"x4" & Pillow.

27 Supplying & Installation of 2 Door Wardrobe of size 881mm W x 545mm D x 1910mm H. Wooden Wardrobe (Cola Rain).

28 Supplying & Installation of 4 Door Book Case shall have the configuration of 914mm(W)x320mm(D)x1742mm(H). The unique design provides the right rigidity to the Top hinged doors , which shall facilitate easy use. The Book Case shall be made from prime quality CRCA steel with anti rusting treatment. It shall have a Rigid Knock Down Construction. The Top Pannel, Back Pannel and Side Pannel are made from 0.7mm high yield CRCA and other components from 0.8mm CRCA. Each door shall have a 6 Lever Cam Lock with Common Key. 3mm thick glass should be used in each door for clear inside vision whih shall be secured in a metal frame through a rubber gasket. Scissor Mechanism should be provided in each door for receding inside the top of every compartment and it shall ensure parallel and smooth movement. Each door should be provided with plastic side end caps as handle which is easy to grip. Each compartment shall have a storage shelf with a UDL capacity of max 80 Kg. The 2 Door Book Case shall have 18mm PLB Top straight edge with PVC lipping. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10).

29 Supplying & Installation of Dining Table 6 Seater with 6 nos. Chair-Dining Table of size W x H: 1600 mm x 750 mm (5 ft 2 in x2 ftl in • A solid, UV cured, and matte-finished rubber wood frame with sleek curved legs, makes this table a must-have. • The whitewash-shaded wooden frame and the rustcoloured fabric upholstery, make this dining collection an attractive addition to any home.

30 Supplying & Installing of Quartz Abstract Quartz Analog Wall Clock(32 Cm X 32 Cm X 3.5 Cm,White).

31 Supplying & Installing of Table without cpu hanger of size 1500 x 750 x728 Top made up of 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Modesty Panel-18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Rectangular Frame-Fabricated component in 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester),Leg-Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS:7138), Finish: Powder coat (Epoxy polyester), Storage-Pedestal- Drawer Configuration/Product size/Styling-Box-Box-File : 3555.5(w) x 559(d) x 670(h), Construction & Material- Welded Assembled , Shell -0.6mm Thk CRCA as per IS-513. Drawer Tray & back-0.5mm Thk. CRCA as per IS-513. Drawer Front-0.6mm Thk CRCA as per IS-513. Locking- Cam Lock. Leveler- Plastic M8 leveler mounted below Body Shell. Handle- Injection moulded Polypropylene. Finish- Epoxy Palyester Powd. Coated to the thickness of 50 microns (+-10).

32 Supplying & Installing of Table without cpu hanger of size 1350 x 750 x728 Top made up of 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Modesty Panel-18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Rectangular Frame-Fabricated component in 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester),Leg-Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS:7138), Finish: Powder coat (Epoxy polyester), Storage-Pedestal- Drawer Configuration/Product size/Styling-Box-Box-File : 3555.5(w) x 559(d) x 670(h), Construction & Material- Welded Assembled , Shell -0.6mm Thk CRCA as per IS-513. Drawer Tray & back-0.5mm Thk. CRCA as per IS-513. Drawer Front-0.6mm Thk CRCA as per IS-513. Locking- Cam Lock. Leveler- Plastic M8 leveler mounted below Body Shell. Handle- Injection moulded Polypropylene. Finish- Epoxy Palyester Powd. Coated to the thickness of 50 microns (+-10) .

33 Supplying & Installing of Table without cpu hanger of size 1200 x 500 x 728 Top made up of 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Modesty Panel-18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Rectangular Frame-Fabricated component in 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester),Leg-Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS:7138), Finish: Powder coat (Epoxy polyester), Storage-Pedestal- Drawer Configuration/Product size/Styling-Box-Box-File : 3555.5(w) x 559(d) x 670(h), Construction & Material- Welded Assembled , Shell -0.6mm Thk CRCA as per IS-513. Drawer Tray & back-0.5mm Thk. CRCA as per IS-513. Drawer Front-0.6mm Thk CRCA as per IS-513. Locking- Cam Lock. Leveler- Plastic M8 leveler mounted below Body Shell. Handle- Injection moulded Polypropylene. Finish- Epoxy Palyester Powd. Coated to the thickness of 50 microns (+-10).

34 Supplying & Installing of Insight Table of size 1800*900*740 mm Top made up of 25 mm Thick PLB Tops with 2mm Thick PVC Edge Beading Pre Laminated Particle Board (PLB) C – Frames Legs 1.6 mm thick M.S C¬ Frame Supporting the Top.

35 Supplying & Installing of Book Trolley of size 900mm(I)x325mm(W)x1800mm(H).

36 Providing & Fixing water purifier with R.O & U.V.: -Water Purifier of 15 Ltr. With R.O & U.V Technology heavy duty all complete job.

37 Supplying & Installing of Map Stand Large Size Mounting Type - table top Color = White, Brown / Black, Multi-colour, Light Wood, Dark Wood size - standard Primary Material = Solid Wood

38 Supplying & Installing of Magzine Display Rack main unit: The product should be made Prime Quality CRCA Steel - Panels from 0.8 mm thick and Side panels should be made of 27mm thk Prelaminated particle board (PLB) with laminate on both sides. Rigid Knock down construction. 5 Level Racks per unit should be available. the display tray should be Suitable for magazines, periodicals, aesthetically appealing Metal tray at an angle for easy viewing, receding facility to access the storage behind & Sliding on plastic rollers. Each of 5 level should have a behind storage shelf and Uniformly Distributed Load Capacity per each shelf shold be 35 Kg maximum. The final finish should be for all metal component in Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10). The overall size should be Width: 290mm Main Unit, Height: 1890mm (Incl. 85mm Skirting), Depth: 400mm. The size for metal skirting should be Width- 867mm (for 3units i.e 1 Main body & 2 Addon Body), Depth- 397mm, Height- 85mm. Approved Make: Godrej / Herman Miller / Haworth. . Supply & Installation of Periodical Display Rack Addon Unit: The product should be made Prime Quality CRCA Steel - Panels from 0.8 mm thick and Side panels should be made of 27mm thk Prelaminated particle board (PLB) with laminate on both sides. Rigid Knock down construction. The add-on units should be stacked width wise to form a bank of racks having common side panel5 Level Racks per unit should be available. the display tray should be Suitable for magazines, periodicals, Aesthetically appealing Metal tray at an angle for easy viewing, receding facility to access the storage behind & Sliding on plastic rollers. Each of 5 level should have a behind storage shelf and Uniformly Distributed Load Capacity per each shelf shold be 35 Kg maximum. The final finish should be for all metal component in Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10). The overall size should be Width: 290mm Addon Unit, Height: 1890mm (Incl. 85mm Skirting), Depth: 400mm.

39 Supply & Installation of Mosquito Net for Double Bed | King Size Foldable Machardani | Polyester 30GSM Strong Net | PVC Coated Corrosion Resistant Steel Wire, Mosquito Net for Double Bed – King Size 200cm x 200cm x 145cm ( i.e. 6.5 Ft X 6.5Ft X 4.7ft) Suitable For 2 Adults 1 Child , with Star patch Storage Bag, Self-supporting, high strength, PVC Coated steel spring frame. Easy to install, fold down.

40 Supply & Installation of Adjustable Foot Rest for Office Chair with Acupressure Points and Roller | Ergonomic Footrest for Office Desk with 6 Heights | Foot Rest Under Table | Foot Stool for Home, Office Table, and Sofa, Unbreakable, Non-Slip Legs Acupressure Massage Texture: Our footrest features unique acupressure points to massage your feet, improving blood circulation and relieving tension. Our ergonomic under desk footrest has bumps and rollers on the surface.

41 Supplying & Installing of News Paper Stand of Size in cm = 90D x 90W x 60H Centimeters, Constructed with Pre-laminated MDF, Prime Quality CRCA Steel & Virgin ABS.