SPL REPAIR OF BLDG NO P-3M INCL BATHROOM AND PROVN OF DRAINAGE IN UNIT AOR OF ARMD REGT AT NAMS

Amount

M&L for brickwork with sub class 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete incl demolition of brickwork /stone built in cement mortar etc. disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC, complete all as specified and directed.

ditto- all as per Sl No 1.00 above here in but except bricks.

M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in CM 1:4 complete incl demolition of brickwork /stone built in cement mortar etc., disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC complete all as specified and directed.

M&L for rendering 15 mm thick cement plaster in CM 1:6 on brick Work or concrete surfaces including finished even and smooth without using extra cement all as specified and directed.

M&L, Rendering 15mm thick in CM 1:4 on of brick work or concrete surface finish even and fair incl WPC as per user manual complete all as specified and directed. (WPC will be measured and paid separately).

M&L, Rendering 15mm thick in CM 1:6 on of brick work or concrete surface finish even and smooth (w/o using extra cement) incl taking down old plaster on brick or stone walls ,scrubing down with water etc & dispose off debris where directed by EIC, complete all as specified and directed.

M&L, Rendering 15mm thick in CM 1:4 on of brick work or concrete surface finish ever and fair (w/o using extra cement) incl taking down old plaster on brick or stone walls ,scrubing down with water etc & dispose off debris where directed by EIC, complete all as specified and directed.

Supply only liquid WPC complete all as specified.

M&L, Rendering 10mm thick in CM 1:3 over concrete surface as on ceiling finish even and smooth w/o using extra cement incl taking down old plaster on ceiling ,scrubing down with water etc & dispose off debris where directed by EIC, complete all as specified and directed.

M&L for galvenised low carbon durable twisted hexagonal woven chicken wire mesh with hexagonal face distance between faces of hexagonal range from 13-50 mm including fixing with drilling, nailing with nails head of min 0.5 inch to properly fix with washer if require with wire not less than 0.9 mm dia (anealed) at a distance not more than 20cm bothways and applying RCC 1:1½:3 (using 6mm graded stone aggregate and coarse sand) for the thickness not less than 25 mm with plasticizer of approved make in appropirate cement ratio as per manufacturer instruction at any height on ceiling complete all as specified and directed.

M & L for preparation of new plastered surface and applying two coats of distemper oil emulsion on ceiling over one coat of primer etc complete all as directed.

M&L for applying one coat of distemper oil emulsion on ceiling etc on old surface incl removal of existing treatment & preparation of surfaces, complete all as spcified and directed .

M & L for three coat of white wash incl preparation of new/old plaster surface of ceiling complete all as specified and directed.

M&L for two coat of oil bound distemper over one coat of primer on new plasterd surfaces of walls, pillars cornces etc incl prepartion of new plastered surfaces through electrical operated grinder complete all as spd and directed.

M&L for applying two coats of cement base paints over one coat of alkali resistant primer on walls etc, incl preparing new surfaces of walls by brooming down or by steel wire brushing complete all as directed .

M&L for applying one coats of cement base paints on walls etc, including preparing old surfaces of walls by brooming down or by steel wire brushing as directed by EIC.

M & L for repair to RCC Chajjas, roof projection edges, hanging part of chajjas, edges of chajjas, RCC papafeets, under the roof / floor slabs with PCC 1:2:4 (using 12.5mm crushed graded agg) incl neccasary renforcement 8mm to 12mm TMT bars , form work , MS wire mesh for bounding the concrete on ground required and plaster work in CM 1:3 & periodical services to match with the existing surfaces finishing at any height of buildings etc completed all as specified and directed by Engr-in-Charge.

S&F in repair for 3mm thick, sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.5 Sqm in each pane fixed with oil putty or beads and incl hacking out glass old complete all as specified and directed.

S&F in repair for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples / beading complete all as specified and directed..

Supply and fxing in replacement of rotational moulded polythene water storage tank, white coloured, tripple layer cylindrical vertical with closed top 500 litre capacity hoisted and fixed in position, including inlet and outlet pipe connections, 20mm dia and 15 mm dia GI pipes medium grade respectively, 20mm GI pipe medium grade over flow pipe 15 cm long wash out with plug and brass ball valve 20mm, high pressure with polyethelyne float and fly nuts complete all as specified and directed.

Description all as per Sl item No 20.00 above but 1000 litres water storage tanks.

M & L for PCC 1:4:8 type D-2 (using 40 mm agg. ) in sub base of flooring including demolition and disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC.

M&L for non skid ceramic any coloured/printed tiles 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor of shade & designed as approved by GE,set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles,over15 mm thick rendering as screed bed in cement mortar (1:4) in floors, incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

Description all as per Sl item No 23.00 above but area of each tile exe 0.11 sqm but n.exe 0.18 sqm, in floors & dado etc complete all as specified and directed.

M&L for glazed ceramic coloured/printed/dark tiles size 300x200mm x7 mm thick on vertical surface in skirting /dado ,set and jointed in neat cement slurry and pointed with white cement with pigment to match the colour of tiles, 10 mm thick rendering on fair faces of concrete surface of verticle in CM (1:3) finished even and smooth without using extra cement complete, shade & design as approved by EIC/GE, incl dismantling and rubbish off the primises etc all as specified and directed.

Description all as per Sl item No 25.00 above but area tiles of size exc 0.09sqm but n.exc 0.18sqm on vertical surface in skirting /dado etc.

M&L for Vitrified Ceramic tiles light/dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 sqm , in floors, on vertical surfaces of wall etc. set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in CM 1:4 for laying floor finishes and pointed in white or coloured cement to match and incl dismantling / demolition and rubbish off the primises etc complete all as speciefied and directed.

M&L for green marble 15-17 mm thick over cement screed bed laid on 10 mm thick CM 1:3 and jointed with grey cement slurry mixed with pigment ot match the shade of the slab / staircase / steps,riser incl rubbing and polishing incl moulding rounding to edge of marble & dismantling and disposal of unserviceable material, debris and rubbish to a distance exc 100m as directed by the EIC complete all as specified and directed.

M&L for Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding ,rounding of edgeing and dismantling and disposal of unserviceable material, debris and rubbish to a distance exc 100m as directed by the EIC complete all as specified and directed.

S&F in repair 18/19 mm prelaminated particle board, prelaminated both side with decorative choice lamination & other side balancing white lamination , fixed with screws to timber/steel frame work dismantling and disposal of unserviceable material, debris and rubbish to a distance exc 100m as directed by the EIC complete all as specified and directed.

M&L 50 mm thick cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in plinth protection and laid in panel complete and finished the even & fair and providings joints through out the thickness of plinth protection filed with mastic filling comprising one part of 01 bitumen 85/25 grade and three part of sand by weight incl dismantling / demolition and disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC complete all as specified and directed.

M & L for PCC 1:2:4 Type B-2 (using 20mm graded stone aggregate) as in flooring incl finishing the cement concrete surface even and smooth with using extra cement , rubbish off the primises and incl demolition complete all as Specified & directed .

M&L for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade 'B' in on concrete slab complete all as specified and directed.

M & L for framed work as in doors of angle or other section complete drilled for fixing sheeting with all fitting and fixture complete (Fe 410-W (Gde-E-250) quality A) complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in hold fast etc including necessary form work complete all as specified and directed.

S&F for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides incl taking down shutter & two coat of synthetic enamel paint over a coat of pink primer on wooden surface and cutting holes in frames of any type/wall and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as require and make finish good to the existing surface and the following builders hardware contain each shutter :- (i) Three x MS butt hinges, medium weight, cold rolled mild steel 100mm long (ISI Marked) with welded or screwed as required. (ii) Two x aluminum anodized barrel tower bolts of extruded section 150mm long (ISI Marked). (iii) Two x aluminum handles cast type anodized 150mm long (ISI Marked). (iv) One x aluminium alloy, anodised, sliding door bolt of 250mm long & 16mm dia with hasp, staple (bolt type) and fixing clips of sheet, complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length in floors and fixed to walls with clamps, nuts and bolts at every 2mtr length including all fittings fied to wall and taking down old pipes complete all as specified and directed.

Description all as per Sl item No 37.00 above but laid in trench or in floor

S&F PVC Gully Trap 125/ 110mm setting / jointed with solvent cement complete all as specified and directed.

S&F for 110mm bore PVC(SWR) bends any radius complete all as specified and directed.

M & L for one coat of synthetic enamel paint on steel surface incl preparation of old steel surface width or girth exc 10cm complete all as specified and directed.

M&L for one coats of synthetic enamel paint on wooden surfaces of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed.

S&F for 2nd class hard wood glazed and skelton door shutters 35mm thick, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc the size of member of shutter as specified in SSR part-I clause 8.24(a) and fitted to chowkahts fixed with stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with wire staples or wooden beads incl taking down shutter and two coat of synthetic enamel paint over a coat of pink primer on wooden surface & cutting holes in frames of any type/wall and making good dismantled portion in PCC 1:2:4 type B1 /cement plaster 1:4 as require and make finish good to the existing surface & incl the following builders hardware contain each shutter :- (i) Three x MS butt hinges, cold rolled mild steel 100mm long (ISI Marked) with welded or screwed as required. (ii) Two x aluminum anodized barrel tower bolts of extruded section 150mm long (ISI Marked). (iii) Two x aluminum handles cast type anodized 150mm long (ISI Marked). (iv) One x aluminium alloy, anodised, sliding door bolt of 250mm long & 16mm dia with hasp, staple (bolt type) and fixing clips of sheet, extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:3 with WPC in sunken slab cornics chajja edges incl cleaning of surfaces complete all as specified and directed.

M&L for preparation of roof surface & applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced wih polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application, joints to be touched hot and width of overlaps not be less than 150 mm complete all as specified and directed.

M&L, cement concrete 1:7:12 (40 mm graded aggregate) in lean concrete including demolition complete all as specified and directed.

S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube incl taking down old frame any type complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and raials with suitabale PVC sheet beading, and jointed together with solvant cement, fixing in the frame at side as per specification and drawing incl taking down old shutter complete all as specified and directed.

S & F for butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, 100mm, type C-21 complete all as specified and directed.

S&F for aluminum handles cast type anodized 100 mm long (ISI Marked) complete all as specified and directed.

S&F for 150mm aluminium anodised barrel tower bolts of extruded section and fixed ISI marked complete all as specified and directed.

M&L for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc. (i) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (ii) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (iii) MS Tower bolt 150mm long - 2 No per leaf (iv) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (v) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (vi) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf . (vii) 8 mm square guard bar, 10 cm centre to centre. (viii) 25x4 mm flat iron all around for joint of both frame. (ix) stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples & 3mm thick, sheet glass ordinary quality and glazing with oil putty .(x) Two coat of synthetic enamel paint to MS window and guard bar. Note : Incl taking down old steel / wooden window and making good dismantled portion with PCC 1:2:4 type B0 incl hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed by Engineer-in-charge.

M&L for anodised aluminium framed work for door, window / vent (powder coated) aluminium section weighting 0.55kg/RM with one or more rebated incl jointed cleat for fixing etc incl taking down old frame complete all as specied and directed

M&L for anodised aluminium powder coated door, window and ventilator shutters, aluminium section weighting 0.55kg/RM fixed type without sash bar, incl necessary 4.8mm th sheet glass ordinary quality & glazing / black or PVC sheet joining with cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, lock, 2 Nos aluminium handles 150mm, 3 x hinges, 2 x Aluminium tower bolts 150mm with each shutter any type incl taking down old frame complete all as specified all as specified.

M & L for chequered tiles of size 300 x 300 x 25 mm thick (colour and glazed approved by EIC) with grey cement and pigments laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry, incl dismantling complete all as specified and directed.

M&L for broken bricks hard core gauge n.exc 63mm deposited, spred and levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces.

M&L for pointing to brick tiles in CM 1:3 laid flat in roofing incl racking out joints complete all as specified .

S & F for 4mm thick acrylic sheet board (not less than 4.70kg/sqm) of high quality with media printing of 3m of bust quality (size/ frame of board ,design of board tye of print of sheet,size of studd ,sample of letter pictures, writing will be provided by Engineer-in-charge) and fixed at any hight from GL incl stainless steel stud of best quality as approved by GE, incl (minium 4 studs at each board /sheet) including dismantling existing old damaged sign board complete all as specified and directed.

S&F in repair for aluminium (extruded section) door closer hydrulicacallyregulated designation No 3 universal type suitable for door shutter upto 1000mm in width and of weight between 61 to 80 kg and complete all as specified and directed.

S&F for 15 mm bor GI tube medium grade fixed to wall or under floor incl taking up or down old tube complete including cutting chases and make good in CM 1:3 complete all as specified and directed.

S& F in repair 20 mm bore G.I tubing in new or old location (wall/Roof) with all fittings incl taking up or down old tube complete all as specified and directed.

Fixing only in repair steel tubing and connection 20 mm dia bore to wall and laid in floors incl taking up or down old tube and cleaning for refixing .

S & F in repair Bib tap CP fancy type/long body 15 mm bore with will crutch or buttewrfly handle screwed down screwed to iron pipe complete with all fittings all as specified and directed.

S & F in repair Angle cock CP fancy type 15 mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete all as specified and directed.

S & F in repair Stop cock concealed long shank chromium plated fancy type 15 mm bore screwed down high pressure with crutch or butter fly handle complete all as specified and directed.

S& F for in repair swan neck 15mm bore pillar cock chromium plated fancy type screw with iron pipe incl all fittings complete all as specified and directed .

S&F in repair PVC waste pipe 32 mm to 40 mm dia (corrugated) for wash hand basin/sink fixed in repair complete all as specified and directed.

S&F in repair for PVC connections 45cm long superior quality with PTMT nut on both side complete all as specified and directed.

S&F in repair for CP fancy type 100mm size chromium plated shower roses with or without swivel joints, any size including fixsing to steel pipe or union complete all as specified and directed.

S&F in repair 10 ltr capacity low levels flushing cistern with PVC bend and PVC flush down pipe etc complete all as specified and directed

S & F in repair for viterous china squating pan of (Orissa Pattern) size 580 mm white with 'P' or 'S' trap front or back inlet and integral foot rest (excluding flushing cisteern and flush pipe) fixed incl cement concrete bedding as required set complete all as specified and directed.

S & F in repair for viterous china wash down water closet pan (pedestal pattern) coloured including 'P' or 'S' trap with flush pipe of chromium plated brass 32 mm dia for low level flushing cistern incl plastic seat cover white closed pattern with float bottom and cover and jet connection and mild steel chrominum plate or aluminized hanging device fixed in repairs complete all as specified and directed.

S & F in repair for viterous china wash hand basin white flat back size 550 x 400 mm with leg incl CP waste coupling, waste pipe & plug and porclain stopper brackets and cutting for and pinning in ends of brackets or erceting stand fixed complete all as specified and directed.

S&F in repair wash basin mixer without popup wastage system with 450 mm long braided hoses complete all as specified and directed .

S&F Health Faucet hand shower with 8mm dia 1mtr long flexible tube and wall hook complete all as specified and directed.

S&F for 100mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors incl taking down old pipe complete all as specifed and dirtected.

S&F for 100mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls etc incl taking down old pipe complete all as specifed and dirtected.

S&F for 75mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls etc complete incl taking down old pipe complete all as specifed and dirtected.

S&F for 100mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured)

S&F 75mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured)

S & F in repair vitreous china ware oval wash hand basin, suitable for fixing on granite counter any colour, size 570 x 450 mm size including cutting for and pinning ends of brackets or erecting stand including fixing waste pipe , CP waste coupling & bottle trap all as specified and approved by Enger-in-Charge.

M &L toilet paper holder stainless steel recessed type complete all as specified and directed

S&F corner glass shelf 300X300mm brass chromium plated of 10mm thick with bracket compleate all as specified and directed.

S&F glass shelf (500x125mm) with brass bracket compleate all as specified and directed.

S&F in repair 15 mm Gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S & F in repair vitreous china urinals, half stall type (420 x 395 x 635 mm) , complete including providing and fixing, bedding urinal against wall in cement mortar 1:2, pointing around urinal back in cement, grating and union for discharge pipe, CP urinal spreader and fitting with bottel trap & CP waste coupling all as specified and approved by Enger-in-Charge.

S&F Aluminum Curtain Rods powder coated 25mm dia with brackets including screws fixing of walls complete all specified and directed.

S/F steel work in tubular trusses and posts,vertical/horizontal bar,chin up bar and similar work including special shaped washers,chequered plates,etc complete using butt welded tubes conforming to IS 1161-1979 graded st-240 with one shop coat of zinc chromate primer including dismantling of old mild steel of any description complete all as specified and directed.

M & L for applying two coat of undiluted thick coat of acrylic reinforcement liquid applied elastomeric water proofing membrane with UV resistance properties and solar refective properties over one coat of primer (1:3, Dilution:water) Note: Every each coat gap between 6 hrs) complete all as specified and directed by engineer -in-charge,

M&L 25mm thick Cement concrete type B-1, 1:2:4 (12.5mm graded aggregate) including prepration of old surface, scraping, washing, boorming, chipping etc complete all as specified and direct by Engineer-in -charge.

M & L for TMT bars 10 mm dia and over cut to length bent to shape reqd including cranking, bending and binding with and including ms wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified

M/L form work to soffits of suspended slab such as roof slab floor slab not exc 200mm thick with rough finished surface of concrete all as specified and as directed by Engr in Charge.

M/L reinforced cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in slab and finishing exposed surfaces fair & even all as specified.

S&F in repairs 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm long fixed with two plugs (Gutties) all as specified and as directed by Engr in Charge.

Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints 75 mm dia fixed to walls all as specified and as directed by Engr in Charge.

Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints 110 mm dia laid in trenches or in floors all as specified and as directed by Engr in Charge.

Supply and fixing PVC (SWR) bends any radius of 110 mm bore all as specified and as directed by Engr in Charge.

Supply and fixing PVC (SWR) bends any radius of 75 mm bore all as specified and as directed by Engr in Charge.

S&F PVC (SWR) junction single, (single T) equal or unequal 75mm dia with access door all as specified and as directed by Engr in Charge.

S&F PVC (SWR) junction single, (single T) equal or unequal 110mm dia with access door all as specified and as directed by Engr in Charge.

S&F PVC(SWR) vent cowl 110mm dia all as specified and as directed by Engr in Charge.

S&F PVC(SWR) vent cowl75mm dia all as specified and as directed by Engr in Charge.

M&L for PVC(SWR) floor trap, plain with grating including jointing with solvent cement, dia of outlet 75mm

M&L for 35mm thick precast cement concrete jalli and louvers, with Type B-0, 1:2:4 PCC (using 12.5mm graded stone aggregate) set in CM 1:4, including all mouldings and also incld frame with dismantaling of existing etc, complete all as specified and directed.

M & L for providing pre cast cement concreate (RCC Jali pillar) size of piller 100x100x700mm and taking down compleate all as speified and directed.

Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete as specified and directed by Engineer-in -charge.

M&L for Cement concrete in surface channels and drains type C-2 1:3:6 using 40 mm crushed stone aggregate complete as specified and directed by Engineer-in -charge.

M&L for Brick work with sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete as specified and directed by Engineer-in -charge.

M & L cement concrete as in coping type B1 1:2:4(using 20 mm crushed stone aggregate) rounded or chamfered on edges as directed.

M & L for Plastering 15 mm thick on fair face of brick work in cement mortar 1:4 finished even and smooth using extra cement complete as specified and directed by Engineer-in -charge.

M&L for RCC (1:1.5:3) type B1 (using 20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors roof, landings, balconies canopies canopies, deck slabs and in shelves and the like etc complete all as specified and directed.

M&L for Pre-Cast reinforced cement concrete 1:2:4 type B-1 with using 20 mm graded stone aggregates as in cover slabs (for manholes etc)chullah hoods, chajas, water troughs, mangers, shelves and similar articles with plan faces set in cement mortar (1:4) including necessary use and waste form work etc complete all as specified and directed by Engineer-in -charge. Note - Reinforcement shall be measured and paid separetly.

M&L for stone sett flooring with stone setts of size 200 to 250mm long 150to 200mm wide an 150mm deep and side dressed bedded in cement motar 1:3 joint 20mm thick grouted in cement motar 1:2 with an admixture of matalic floor hardner 5% weight of cement and stuck flush including dismantling old stone complete all as specified and directed by Engineer-in -charge.

Fixing only stone sett flooring with stone setts of size 200 to 250mm long 150to 200mm wide an 150mm deep and side dressed bedded in cement motar 1:3 joint 20mm thick grouted in cement motar 1:2 with an admixture of matalic floor hardner 5% weight of cement and stuck flush including dismantling old stone complete all as specified and directed by Engineer-in -charge.

M&L for reinforced concrete pipe class NP- 2, 300mm dia with collar laid and jointed with CM 1:3 complete all as specified and directed by Engineer-in -charge.

M&L for Concrete bed to drain pipes 300mm dia including packing under and haunching against the sides of pipe ofter they are laid and tested in cement concrete 1:3:6 type C-2 complete all as specified and directed by Engineer-in -charge.

Taking down aluminium/copper point wiring from existing conduit / batten (light, fan, socket or power) complete such as switches, ceiling rose, pendent, regulators, socket, light fittings etc and removing material from site and making good the disturbed surface of wall / floor etc, complete all as specified and directed

M & L for Point wiring with 1.5 Sqmm (Nominal Area) 1100 Volt Insulated, FRLS unsheathed multi stranded flexible copper conductor cable in old PVC concealed conduit dia 1.5 mm thick for following items (including cutting chases and making good the distributed surface ) and fixing new 3 mm thick hylem sheet top cover, sheet screws and 1.6 mm thick GI sunken boxes included 1.5 sqmm stranded copper conductor with green PVC insulation earth contunity conductor connected to comman earth dolly etc. complete all as specified and directed for the following:- NOTE : The cost of sunken boxes and bakelite sheet is included in the quoted rate)

One light / Fan point/ Exhaust fan point controlled by one 5 Amp switch one way.

One 3 pin socket outlet /joint 5 amp on the Indepedant board completeall as specified

Description all as per Srl item No 120.02 above but on the same board completeall as specified

Description all as per Srl item No 120.00 above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper solid conductor connecting to common earth dolly complete.

Supply and fixing of switch piano type 6 Amps one way 230 volts AC complete all as specified and as directed.

Supply and Fixing of socket outlet 5 pin, 6 Amps flush type 230 volts AC complete all as specified and as directed

Supply and Fixing of switch piano 16 Amps type one way 230 volts AC complete all as specified and as directed

Supply and Fixing of socket outlet 6 pin 6/16 Amps multi purpose flush type 230 volts AC complete all as specified and as directed

Supply and Fixing of switch type regulator 5 step 230 volts AC complete all as specified and as directed

Supply and fixing of ceiling rose 65/50 mm two to three terminals complete all as specified.

Supply and fix of MCB 32 Amps single pole with neutral, AC 230 Volts complete all As specified and directed.

Supply and fix of MCBs single pole (SP) 5 to 32 Amps with 10 KA breaking capacity of 'C' series in distribution boards complete all as specified and directed.

Supply & fixing in replacement of single pole and neutral sheet metal enclosures with two pin & earth plug and socket complete with one single pole MCB of 20 Amps complete all as specified and as directed.

Supply and fixing in replacement Sheet metal enclosure for DB's when MCB's to be used double door factory made flush fixed complete with 200 Amps rated busbar 240 Volts single phase 8 ways complete all as specified

Supply and fixing Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 250 mm sweep, metallic body complete with louvrers and shutters including making and finishing good hole in wall for fixing Exhaust fan of 300 mm sweep including necessary brick work and plaster to match the existing surface complete all as specified.

Supply & Fixing flood Light Luminaire 150 watt with .high power SMD LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base, pole adapter, pressure die cast LM6 diffusor: injection model polycarbonate, powdre coated in IP 66 Incliding protection over temperature should be from the same manufacturer Product complete all as specified and as directed.

M& labour for service wire 10 sqmm 4 core with continous earth wire pvc insulated and pvc sheathed1100 volts grade all as specified and directed

Supply and fixing of LED T-8 tube light fitting with sinle side connection LED tube rod 18/20 W, 4 Feet made of CRCA sheet steel box type including bipin holder and connection with PVC insulated twin core 23/0.0076 ywisted copper cable from ceiling rode to light fitting complete all as specified and directed.

Material and labour for lamp holder insulated body with back plate batten/angle type for batten fitting with LED Bulb 230V AC 10 watt cool day light 6500K complete all as specified.

Supply & fix in replacement of LED Street Light Luminaire 25 watt 6000K with .high power LED cool white, CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base pole adapter, powder coated pressure die cast aluminium with heat resistant toughened glass with lens all as specified and as directed.

Supply and fixing in replacement of security light mounting bracket made out of GI pipe 40 mm dia medium Grade not less than with 1.2 m long in any shape with 2 nos of pole fitting clamps made out of MS flat of size 40 x 6 mm and nuts and bolts and painting with aluminium paint, all as direced by Engr in Charge

M&L in replacement of two single core sub main wiring 6 Sqmm multi-strand PVC insulated copper conductor FR cable including PVC insulated copper conductor cable of size 6 Sqmm as cotinuous earth wire connecting to common earth including conduit , connections of cable with MCBs or bus bars complete all as specified and directed. Note : Three runs of 6 Sqmm cable shall be measured as one unit.

Suply, laying and testing in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 sq. mm 3.5 core all as specified and as directed

Labour for drilling hole under the road/verandah with the help of trechless excavator machine without damaging the road/vernda horizonally for veranda crossing for laying GI tubing of any size for cable protection complete all as sp an directed.

Supply and fixing / laying galvanized iron pipe of 40 mm nominal dia light grade fixed to poles with clamps nuts, bolts and washers or laid under road/ veranda crossing or fixed to wall including painting with two coats of aluminium paint over a coat of red oxide paint complete all as specified and directed.

Supply and fixing in replacement of sheet steel enclouser distribution boards, double door factory made TPN Vertical 4 way 3 phase 415 volts 4 way with 200 Amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits one incoming MCCB and 12 outgoing MCBs circuits comprising of 3 phase 4 wire of suitable rating complete all as spcd and directed with the following accessories :- (a) MCCB 100 amps, 25 KA, TP, 415 volts, 50 Hz = 01 No. Note:- Out going MCB shall be measured and paid for separately

Taking down ceiling fan, exhaust fan in situ and refixing after servicing, repairing and painting to ceiling fan/ exhaust fan including exhaust fan louvers, scratching old paint and preparation of surface for painting with one coat of white / grey enmeled paint and including cable from ceiling rose to fan complete all as specified and as directed.

M&L for earthing complete in replacement with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade ) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PART 1 , with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switche, DBs) complete all as specified & testing on completion.

Supply, fabricating, installation, testing, commissioning Polycarbonate ASTA CPRI approved OEM made LT FEEDER PILLAR shall be made of modular POLYCARBONATE THERMOPLASTIC ENCLOSURES which should be UV resistance, Degree of protection against mechanical load should be IK08 (5 Joule) in accordance with IEC 62262. The manufacturer of panel shall submit a copy of ASTA CPRI TEST REPORT IN POLYCARBONATE OF DEGREE OF INGRESS PROTECTION (IP) 65 IN ACCORDANCE WITH IEC 60529 and the share panel assembled by OEM, channel partner or sister concerned assembly will not be accepted. The gasket should be internally embedded made of polyurethane. The panel should pass glow wire test 960oC in accordance with 60695-2-11 [flame retardant and self-extinguishing]. The manufacturer of panel shall submit a copy of his CPRI TEST REPORTS with Short Circuit Test IN POLYCARBONATE only also share panel assemble by OEM, channel partner or sister concerned assembly will not accepted. The CPRI report shall have mention of following tests performed and passed out satisfactorily Temperature Rise, Dielectric Properties, Short circuit withstand current – Rated peak, short time withstand current and Rated Conditional Short Circuit Current, Effectiveness of Protective Circuits and submit the copy of type test reports for Polycarbonate Thermoplastic Board only

Make- Hensel/Rittal/L&T/Schneider/ABB. LT Feeder Pillar Mini. size 60cm x 30cm x 15 cm, 415 volts for outdoor use, machine pressed front opening with single door with provision of rubber beading and locking system including Copper bus bar 4 strip of size 25 mm wide and 5 mm thick with provision of hole on bus bar fixing of cable mounted on PVC / epoxy insulators, mounted on wall and externally with two coats of synthetic enamel paint over a coat of red oxide primer, legs grouted in PCC(1:2:4) Type B-1 (using 20 mm graded stone aggregate) complete including all provision of opening for incomming/outgoing cables and testing complete all as directed. Make- Hensel/Rittal/L&T/Schneider/ABB main incomer :- 1. MCCB 160A 25KA FP Thermal Magnetic released with Spreader Links - 1 Nos 2. LED Indicator Lamp R,Y,B - 1 Set

Jaspal Construction Co.

tarlok singh contractor

M/s MAHAJAN CONSTRUCTION CO.