PROVISION OF REFUSE DISPOSAL AT VARIOUS LOCATION AT INS CHILKA UNDER GE CHILKA

Amount

Surface dressing n exc 15 CM deep and getting out in soft loose soil etc all complete

Surface excvation in any type of soil n. exc (not exceeding) 30 cm deep and averaging 30 cm deep and getting out etc all complete

Excavating in post holes (or similar holes) each n exc 0.5 cum getting out returning, filling in and ramming earth or broken rubble mixed with each around in layers not exceeding 25 cm etc all complete

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil etc all complete

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete all as specified and as directed.

M&L for PCC type D-2, 1:4:8 with using 40mm graded stone aggregate as in foundation, filling & mass concrete etc all complete

M&L for RCC type B1 1:2:4 (20mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

M&L for brick work with fly ash bricks, straight or curved on plain exc 6m mean radius built in cement mortar 1:6.

M&L for broken stone hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation

M&L for 100mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate complete as in floors all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate complete as in floors all as specified and directed.

S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 Sqm but not exc 0.18 sqm, in floors etc. Including on skirting upto 150 mm height, set and joint in neat cement slurry and pointed in white or colour cement to match the tiles fixed over and including 15 mm thick screed in CM (1:4) complete all as specified and as directed

S&F Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match such as skirting / dado tiles including 10 mm thick backing coat in CM (1:4) complete all as specified and directed.

M & L for 75mm thick PCC type C2 1:3:6 (40mm garade aggregate) as in plinth protection complete all as specified and directed by Engr-in-Charge

M&L for providing, cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs incl necessary form work complete all as specified and as directed.

M&L for 75mm thick cement concrete type C2 1:3:6 (using 40mm graded stone aggregate) as in sub base of flooring, finished even and smooth without using extra cement complete all as specified and as directed by Engrin-Charge

M& L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete as in position to the required line, level and curvature, jointing with cement mortor 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opeing wherever required including demolition complete all as specified and directed by Engr-in-Charge

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approval colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size / shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator , filling the joints with sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand as specified and directed by Engr-in-Charge.

M & L for 15 mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete curfaces mixed with water proofing compound 2% by weight of cement finished even and fairn and smooth without using extra cement complete all as specified and directed. Note : Water proofing compound shall be measured and paid separately.

Supply only liquid water proofing compound

M&L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F welded steel wire n exc 4 Kg/Sqm fabric supplied and fixed complete to wood or steel members complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; ways; railings; framework of water tanks, for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for preparing of new surfaces of steel for painting of any description, over 10cm in width or girth, on new surface over a coat of primer of red oxide zinc and two coat of synthetic enamelled paint over it all as specified and as directed.

M&L for preparation of new plastered external wall surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces plaster even and smooth complete all as specified and as directed.

Returning filling incl spreading, levelling watering and well ramming in layers not.exce 25 CM all as specified and directed.

Removing excavated material, soil to a distance not exce 50M and depositing where directed at a level n.exe 1.50M above the existing point all as specified and directed.

SAHADEV PALAI (BID ID -3144119)

HARI PALAI (BID ID -3139322)