REPAIR TO JOINERY, ALUMINIUM DOORS/ VENTILATORS, STEEL WINDOWS / DOORS/ VENTILATORS CUP BOARD, ROLLING SHUTTER, STEEL DOOR, PVC DOOR, WOODEN DOORS AND WINDOWS ETC IN CERTAIN OTM ACCN AT CME AT CME

Amount

Taking down Chowkats or Frames,not exc. 1.50 Sqm Each with Shutters (without Taking Off Shutters from the Frames), complete all as specified and as directed.

Taking down Chowkats or Frames, exc. 1.50 Sqm but not exc. 4.00 Sqm Each with Shutters (without Taking Off Shutters from the Frames), complete all as specified and as directed.

Taking down shutters only of size exc 1.00 Sqm but not exceeding 2.00 Sqm

S&F 2nd class hard wood plain solid straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamferred,put together with glue pinned at joints etc. complete all as specified and directed

M&L preparing surfaces of wood and wood based and treating ends of posts, back of chowkats. Etc area exc 0.1 sqm but n.exc 0.5 sqm each complete all, as spcified and directed.

S & Fixed factory made plain framed paneled shutters 35mm thick of 2nd class hard wood (any number of panels) with panels of timber flat on both sides feather edges or panel of 9mm BWP commercial ply over 12mm thick veneered panticle board with commercial face veneers fixed to chowkat. The size of rail and stile as per IS : 1003 (Part-1), kiln seasoned and chemically pressure treated complete all as spfd.

S&F 30mm thick flush shutter, solid core construction, with block board core and both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

S& fixed 2nd class hard wood 35 mm thick made glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) complete all as spfd and directed .

Mild Steel works as in bands straps, hold fasts etc, conforming to IS-2062-2006 (Fe-290), embedded portion duly painted with bituminious paint and sanded, complete all as specified.

M & L for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded.

Cement concrete type B1 (1:2:4) using 20mm grades stone aggregate as in copings, bed plates, fixing of hold fasts and other similar works and the like incl weathering, slightly rounded or chamfered angles and throating as directed incl use and waste of necessary form work complete all as spd.

S & F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube etc all as specified and as directed.

S&F Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) consisting of Frame made out of Mild Steel Tubes for Top and Bottom Rails, Mild Steel Frame shall be covered with heat moulded Plain Colour PVC 'C' Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and Plain Colour PVC Sheet for Top Rail, Lock Rail and Bottom Rail on either Side and as Gap insert for Top Rails & Bottom Rail, Panelling of Plain Colour PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable PVC Sheet Beading and Joined together with Solvent Cement and fixing in the Frame at Site as per Specifications and Draw-ings, complete all as specified and as directed.

M&L for Preparing New Wood and Wood Based Surfaces of any description, over 100mm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Coat of Pink Primer, complete all as specified and as directed.

M&L for Preparing old Wood and Wood Based Surfaces of any description, over 100mm width or girth and applying one Coats of Synthetic Enamel Paint (First quality) complete all as specified and as directed.

M&L preparing old Steel and Iron Surfaces of any descriptions, over 10cm in width or girth and applying one Coats of Synthetic Enamel Paint , complete all as specified and as directed.

S & F 100 mm Butt hinges, extruded alu minium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 .

S & F Mild steel butt hinges medium weight , cold rolled, 100mm, ISI marked, complete all as spd .

M&L barrel tower bolts stove enamelled black of size 200 mm complete all as spd .

S & F 150 mm Aluminium handles, cast type anodised

S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete.

S&F 300mm long Aluninium alloy, anodised , sliding door bolt with hasp , staple,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F 300 mm Mild steel sliding door bolts,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed

S&F stainless Steel Wire Cloth, 0.36mm nominal dia of Wire and average width of aperture 1.4 mm and fixed with Tinned Tacks of SS Wire Stapes, fixing etc, complete all as specified and as directed.

S&F in repairs stainless Steel Wire Cloth, 0.36mm nominal dia of Wire and average width of aperture 1.4 mm and fixed with Tinned Tacks of SS Wire Stapes, fixing and repair etc, complete all as specified and as directed.

S&F Mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repairs mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and directed.

S&F 150mm dia double legged door stopper of aluminium alloy with rubber complete all as specified and directed.

S&F in repairs 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares of any size complete all as specified and directed by Engr-in-Charge.

S&F in repairs 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqmtr each pane complete all as specified and directed by Engr-in-Charge.

S&F aluminium colour powder coated partition leaf glazed/pre laminated board exterior quality partly glazed//pre laminated board exterior quality partly glazed panels fabricated including aluminium anodised beading rubber and packing materials and shall be drilling in existing wall and thrust bolt suitable size complete as spd and dir.

S&F aluminium colour powder coated door and shutter single or double leaf glazed/pre laminated board exterior quality partly glazed//pre laminated board exterior quality party glazed panels fabricated including aluminium anodised beading rubber and packing materials and shall be drilling in existing wall and thrust bolt suitable size complete comprising the following:- (a) Aluminium colour powder coated door frame section 101.60x44.45x1.93 mm fixed as per spd (b) Aluminium colourpowder coated vertical section in shutter 85x44.45x2 mm as per spd. (c) Aluminium colourpowder coated Top & style shutter section 95.25x44.45x2.00 mm as per spd. (d) Aluminium colour powder coated handle 02 Nos in each shutter 200 mm long as spd. (e) Aluminium colour powder coated middle lock rail/bottom rail section 150x44.2.65mm cat No.20002. (f) Floor spring (g) Six lever mortice lock brass on in each door (h) 12 mm thick particlular board (pre laminated both face) exterior grade ISI Marked (j) Tinted glass/Plain glass(Colour) 4 mm thick (k) Floor spring Note : If ground requirement for full glass or full Panel contractor should provided as per direction of Engr-in-Charge.

S&F for aluminum powder coated three track slinding window with two or more shutter with 4 mm thick plane glass, one shutter of stainless steel mosquito proofing with good quality bearing ,handle lock,etc rubber beading and glazing clips etc all complete as spd and dir.

S&F aluminium powder coated louvered ventilator with 4 mm thick pin headed glass and 100 mm wide glass strips, white framed and fixed with aluminium powder coated frames complete all as sspecified and directed.

S&F in repair 12 mm thick Veneered decorateive plywood, grade 1 (with BWR resin) with decorate face veneers on both faces; fixed with screws to timber frame work.

M&L 12 mm plywood grade BWR, type BB, fixed with screws to timber frame work and fixed in repairs

M&L 6 mm plywood grade BWR, type BB, fixed with screws to timber frame work and fixed in repairs

Sanding newly tarred or painted surfaces with clean sharp sand complete all as specified and directed

Resecuring or easing & adjusting , without taking down of shutter in the same opening of any description and size complete all as specified and directed.

M&L for 2nd class hardwood for plain fillets,square, rectangular or triangular in section, clean sawn, secured with nails or brads, exc 13 & n. exc 25 sq. cm second class H/W complete all as specified

M&L cover fillet (lipping) of tempered hard board 40mm wide, 6mm thick and fixing with screw complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps (when open) in 30mm complete all as specified and directed.

S&F in repairs 40mm dia cupboard knobs fixed with nut, screws and washers of mild steel bright finish complete all as specified and directed.

S&F 40mm dia cupboard knobs fixed with nut, screws and washers of mild steel bright finish complete all as specified and directed.

S&F 150mm hasp and staple, aluminium anodised , wire type stove enamelled black, including bolt to hinge plate and fixed with screw.complete all as specified and directed.

S&F in repais 150mm hasp and staple, aluminium anodised , wire type stove enamelled black, including bolt to hinge plate and fixed with screw.complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation boards/slabs/blankets, any thickness, including cover fillets

M & L for false ceiling with 4mm thick designer 'E' board fixed on GI grid work with powder coated finish on exposed surface of size 0.6 x 0.6m consisting of GI angle supported on wall of size 24mm x 28 x 0.7mm main tee of size 24mm x38mm x 0.7mm cross tee of size 24mm x 28mm x 0.7 mm using porpose made members interlocking to each other and with with 3mm dia GI wire and making holes etc all as directed including two coats of white wash on ceiling after preparation of surfaces and as per manufacture instruction .

S&F 1.25mm thick steel rolling shutters, without ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete push pull or manual type including locking arrangement (Safety lever locks mild steel with 4 levers for rolling shutters) , two coats of synthetic enamelled paint over a coat of red oxide including taking down old rolling shutter of any description and size complete all as specified and directed.

M&L Welding in repairs n. exc 2.5cm in length to old doors for fixing hinges, tower bolt, sliding door bolt, handles, locking system, etc complete all as specified and directed.

S&F fixed in repairs aluminium sheet 0.56 mm th fixed to door shutters with nails all as directed

S&F in repairs curtain rods, mild steel, chromium plated with fixing brackets, stops, rollers etc.

S&F in repairs brackets for curtain rod

Demolition of brick work or stone boulder masonry built in cement mortar complete all as specified and directed.

M&L for pre-cast PCC block masonary type C-1, 1:3:6 exc 10 cm width and set in CM 1:6 complete all as specified and directed.

M&L walling random rubble uncoursed , well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and directed

All as per item No 53 above but except stone complete all as specified and directed.

M&L 15mm thick cement plastering on block/stone masonry surfaces in CM 1:6 finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L 18/19mm thick Pre-laminated board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with screw to timber frame including taking down existing board of any description complete all as specified and directed.

M&L for repair of aluminum doors and ventilators glasses (fixed with rubber mold or as as required), wiremesh (fixed with screws or as required), and frames as specified and directed

M&L for repair/replacement of handles, tower bolt, locks of aluminum doors as specified and directed.

M&l in repair/replacement of floor door spring of aluminum doors as specified and directed.

M&l in repair/replacement of door closure spring of aluminum doors as specified and directed.

Special Note : (a) Contrator has to employ skilled/unskilled tradesman with adequate experience & required documents to be submitted to office. (b) Labour should wear contractors uniform with firm logo. (c) Minimum of 02 x teams of each trades shall be available for maint of urgent nature whenever called upon of any trade, failing which recovery will be initiated for not employing adequate labour at site.

(d) Site clearance shall be done by contractor after finishing work. (e) All Scarps will be done with mechanical scaper. (f) Mechanical scaper should be deposit in our store at the time of sample approval.

Sunrise Traders (BID ID -3376668)

ShreHari Civil Enginneering and Contractors (BID ID -3377605)

vishalconstruction (BID ID -3376552)

Aakar Construction (BID ID -3376718)

M/S JAYCONSTRUCTION CO (BID ID -3377658)

Decent Decorators (BID ID -3377568)