REPAIR AND RESURFACING OF CERTAIN ROADS AT INS HANSA UNDER AGE BR I OF GE (NW) VASCO

Amount

M&L Repair to pot holes any depth, exceeding 30mm deep and aea not ecxceeding 1.0 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting arround edges to at least 25 mm in depth, making good by applying tack coat with bituminiou primer at 5kg per 10 sqm, putting paving bitumen in premixed Bituminous macadam well rammed and sealed with binder 9.80 kg per 10 sqm blended with 0.09 cum of stone chipping of 0.63mm size and again well rammed (including supply of premixed macadam binder and chippings) complete all as specified and as directed by EIC

M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud, etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified.

M&L for appying evenly a tack coat/priming coat with bituminous primer at 5 Kg per 10 Sqm using paving bitumen with mechanical sprayer over black top surface complete all as specified and directed.

M&L premix bituminous ,macadam 50mm thick (consolidated thickness) laid/rolled and compcated to reqd gradient and camber using binder content of paving bitumen any penetration @ 4% by weight of total mix

M&L Bituminous premix semi-dense asphaltic concrete (SDAC) 40mm consolidated thickness with 5.5% paving bitumen ( VG-30) as binder content by weight of total mix and 60% seal coat materials mixed to SDAC, using hot mix plant and mechanical paver as approved by the GE, rolled and compacted using 8 to 10 Ton vibrator power roller to required camber and gradient complete. Note : (i) Job mix formula for the semi dense asphaltic concrete shall be obtained from the institutes specified in the particular specifications. (ii) In case, as per actual design mix, the binder content by weight of total mix is less than 5.5%, price adjustment shall be made as per average rate of all the purchase vouchers for bitumen pertaining to the work under this contract. If total binder conten as per design mix is more than 5.5%, no price adjustment shall be made for the same. complete all as specified and directed by Engineer in Charge.

M&L Painting lines, dashes, arrows, letters, etc. on roads pavements and the like exc 10cm wide with thermoplast road marking paint, 2.5mm thick, mixed with titanium dioxide and fine glassbeads ( as per manufacturer's instructions), white or golden yellow complete all as specified and as directed.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.

Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.

M/s. P S REDDY (BID ID -3217786)

M/s. R.S. LAWANDE (BID ID -3216850)

K M SUBHANAIAH (BID ID -3217191)

M/S P S BABU (BID ID -3217938)