REPAIRS / REPLACEMENT OF SEWAGE LINE, CLEANING OF SEWAGE LINE, SEPTIC TANK, MANHOLES AND REPAIR TO COMPOUND WALL, GATE, FENCING, FOOTPATH, DRAINAGE, HARD STANDING AND MISC WORKS AT OTHER THAN MH AREA i.e. 54 DOU, 60 COY, 54 I DIV, 654 EME BN, 554 AS

Amount

Cleaning of Sewage line of 100mm bore including manholes, gully traps, grease traps etc. upto 1.5 m deep by removing all filtn/silt, foreign materials and other deposits whatsoever completely and making the line free from all obstacles and testing the flow of sewer line evenly, smoothly by filling water. The cleaning operation will be carried out in suitable lengths by blocking the first and last manholes of sewage line and removing the silt/sludge & other deposits out side of MD land in covered van/trolley, all as specified & directed.

All as per description of serial item No. 1.00 here-in-before but sewage line of 150 mm bore and depth of sewage line upto 1.50m.

All as per description of serial item No. 1.00 here-in-before but sewage line of 150 mm bore and depth of sewage line upto 3.00m.

All as per description of serial item No. 1.00 here-in-before but sewage line of 200 mm to 250mm bore and depth of sewage line upto 4.5 m.

All as per description of serial item No. 1.00 here-in-before but sewage line of 300 mm bore and depth of sewage line upto 6.0 m.

Cleaning of manholes depth upto 1.5 mtr by removing all silt, sludge, any other materials making clean and flushing with water complete incuding removal of spoils out side MD land and taken out cover slab and reset in the same position after cleaning and testing all as specified and directed. cleaning shall be done either manually or mechanically as required and directed by Engr-in-charge.

All as per description of serial item No. 6.00 here-in-before but depth exceeding 1.5 m and not exc 3 m deep complete all as specified and directed.

All as per description of serial item No. 6.00 here-in-before but depth exceeding 3.0 m and not exc 4.5 m deep complete all as specified and directed.

Cleaning of all blockages of Nahani trap/floor trap, bottle trap, gully trap, P or S traps of WCs, 100 mm/75 mm dia CI pipe stacks upto 1st Manhole, CI/SGSW pipe between gully trap & 1st Manhole, CI Tee/Door bends etc to maintain internal sewage system in Md/OTM Accn of the area under AGE B/R -II Secunderabad with and including manual/pressure cleaning pump & flexible rods and other necessary equipments complete all as specified and directed by Engr-in-Charge. Note : (i) Contractor or his authorised representative will collect such type of complaints from AOC Centre complaint cell and SFC Centre complaint Cell of AGE B/R - II at 9.00 AM on daily basis except sunday /Holiday. No extra payment shall be made on account of collection of complaint. (ii) Complaint must be attended within 24 hours of receipt of complaint else recovery of Rs. 100/-per complaint/ per day will be Charged.

Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth for foundation etc or for manholes etc., n.exc. 10 Sq.m on plan and n.exc 1.5m in depth getting out in hard/dense soil.

Excavation in trenches n.exc. 1.5 m wide and exceeding 1.5 m but n.exc 3.00 m.in depth for foundation etc or for manholes etc.

Returning, filling in with approved soil obtained from excavation including spreading levelling, watering and well ramming in layers n.exc. 25cm thick.

Removing the excavated soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.

Demolition and breaking up or taking up drain pipe (salt glazed stone ware, AC or reinforced concrete ) set in cement mortar, 100 mm dia

Demolition and breaking up or taking up drain pipe (salt glazed stone ware, AC or reinforced concrete ) set in cement mortar, 150 mm dia

Demolition and breaking up or taking up drain pipe (salt glazed stone ware, AC or reinforced concrete ) set in cement mortar, 200 mm dia

M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 for 100mm dia pipe

M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 for 150mm dia pipe

M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 for 200mm dia pipe

M&L SWG drain pipe grade 'A' of 100 mm internal dia laid in trenches and jointed in cement mortar complete all as directed.

M&L SWG drain pipe grade 'A' of 150 mm internal dia laid in trenches and jointed in cement mortar complete all as directed.

M&L SWG drain pipe grade 'A' of 200 mm internal dia laid in trenches and jointed in cement mortar complete all as directed.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 100 mm internal dia of pipe.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required internal dia of pipe 200mm.

M&L for Cutting into existing manholes for removing existing branch drain, making good to walling and rendering, cutting out branch channel, and making good benchings for internal dia of pipe 150 mm

Demolition of brick/stone masonry work built in cement mortar including all quions, arches, pillars etc complete.

M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6M mean radius built in CM 1:6 as in manhole etc. complete all as specified and directed

All as per Sl item No 27 above but except bricks including removing the mortar & cleaning complete all as specified and directed

All as per SL Item No 27 but half brick work in CM 1:4

M&L Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) in landings, cover slabs (for manhole etc) including necessary form work and set in CM (1:4). Note:- reinforcement shall be measured and paid separate

S&F MS TMT bars 10 mm dia and over for reinforcement etc, cut to length, bent to shape required including cranking, bending sprially for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified & directed.

All as per Sl item No 31 above but 6 to 8 mm dia.

Taking down cement plastering on brick/stone wall etc including racking out joints, hacking for key, scrubbing down with water etc complete.

M&L 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished the surface even and smooth without using extra cement complete all as specified & directed.

M&L Rendering 15mm thick in CM 1:6 on fair faces of brick or concrete surfaces finished the surface even and smooth without using extra cement complete all as specified & directed.

Supply only integral water proofing compound.

Mechanically pumping out sewage water from Septic tanks/sump well where required and as directed with taking precautionary measurer including tools & plants as required and removing to place out side MD land from the site complete(working in foul condition) all as specified and directed.

Cleaning and de-sludging of existing septic tanks/ deep manholes up to 3 metre deep including taking out sludge in any form alongwith all other foreign materials by mechanical equipment or manually or by way of any other suitable means including removal of sludge and other foreign materials out side the MD land by any means complete(working in foul condition) all as specified and directed.

All as per item No 38 above but depth exe 3mtr and not exe 6 mtr

Removal of filter media including sludge as deposited by excavating in foul position from filter beds etc any depth or width all as specified and getting out.

Supply and loose filling with broken stone aggregate of gauge 40 to 80mm as filter media in filter beds, soak pits etc complete all as specified and directed.

Supply and loose filling with broken stone aggregate of gauge 20mm as filter media in filter beds, soak pits etc complete all as specified and directed.

Cleaning of shurbs /bushes arround the septic tank, filter bed, manholes and along the sewage line complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required 100mm dia

S&F CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors of 100 mm bore

Dismantling old PVC (SWR) pipes any length any dia all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, bore of the pipe 110 mm.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, bore of the pipe 75 mm.

Dismantling old PVC (SWR) bends, junctiosns, T, Vet cowl, floor trap etc any any type any dia all as specified and as directed.

S&F PVC(SWR) bends any radius 110 mm bore without access door

S&F PVC(SWR) bends any radius 75 mm bore provided without access door.

S&F PVC(SWR) bends any radius 110 mm bore provided with access door.

S&F PVC(SWR) junction double, (double T), equal or unequal. 110 mm bore .

S&F PVC(SWR) junction double,(double T),equal or unequal. 110 mm bore provided with access door.

S & F 110mm dia PVC (SWR) vent cowl.

S & F 75 mm dia PVC (SWR) vent cowl.

M&L PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75mm dia of outlet

M&LPVC (SWR) gully trap I25/110 mm, setting and jointing wilh solvent cement complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n. exc. 15 cm thickness (below or above ground level).

M&L 40 mm thick PCC 1:2:4, type B1, using 20 mm graded stone aggregate as in floors finished even and smooth with using extra cement complete all as specified and as directed.

M&L 75mm thick PCC 1:3:6 type C2 by using 40mm graded aggregate, as in plinth protection/paths etc laid in pannels including finished the surface smooth and even without using extra cement.

M&L Chequered cement concrete tiles of size 25 cmx25 cmx20-25mm thick, set, jointed and pointed in neat cement slurry in floors complete all as specified & directed.

M&L PCC type B1 1:2:4 (20mm graded stone aggregate) as in lintels upto 1.5 mtr clear span, cills, steps; seismic and other similar bands, copings, bed plates, kerbs etc. including necessary form work.

M&L for chequered cement concrete tiles with grey cement and pigments of size 300cmx300cmx20-25mm thick set, jointed and pointed in neat cement slurry over and including 15mm thick CM 1:6 screed bed in flooring complete all as specified & directed.

M & L 25mm thick Cement concrete type B-1. 1:2:4 (20 mm graded stone aggregate) as in sub-floors, sub-bases, floors and pavings, etc.

M & L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade over 40 mm thick sand cushion Complete all as directed by Engineer-in-charge Make :- Ultra or Classic.

M&L 15mm thick screed bed in cm 1:4 for laying floor finishes complete all as specified and directed .

Demolition of re-inforced cement concrete of any description and in any position not otherwise provided for including removing the same where directed complete all as specified & directed.

Dismantling posts/struts (wood, steel or RCC) any section including taking out embedded portion from concrete,brick work, masonry etc and making good disturbed ground complete all as specified and directed .

Dismantling structural steel work incl doors, gates but exe framed truss etc all as directed by Engineer-in-Charge

Dismantling fencing wire mesh, any type and in any position all as directed by Engineer-in-Charge.

Excavation in post holes (or similar holes) each n exc 0.50 Cum getting out in hard/dense soil soil, returning, filling in and ramming including watering earth or broken rubble mixed with earth around, in layers n exc 25cm and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

Fixing only chain link fencing including line wires any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire complete.

Supply only chain link M S galvanised fencing any size or type.

S & F Mild steel screw bolts (Machine made) with hexagoanal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, 11 to 15 mm dia of neck, exc 10 cm and n exc 15 cm long complete all as specified and directed.

Supply only MS round bars of 10mm dia as in line bars conforming to Fe 290 Grade E-165.

M&L 5 to 10mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long all as specified and directed.

S&F Galvnised 2 strand, steel barbed wire 2.24 mm dia of barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straighting bolts, including securing or tying at crossing with and provn of galvnised MS wire, staples or steel pins, etc. as directed (Each line wire to be measured including dismantling old wire complete)

All as per item 79 above but restraing and resecruing including making good staples etc.

M&L for Mild steel work as in posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary bolting or riveting etc and similar work confirming to Fe-290 Gde E-165

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging: also fastening and fixing complete Fe-290(Gde E-165)

M&L Preparation of new steel surfaces of any description not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

M&L Hardcore broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.

M&L PCC 1:4:8, type D2, using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete.

M&L providing Pre-cast cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in 40mm thick jallies and louvers etc of design & pattern as directed with plain faces, including all necessary form work etc and reinforced at 100 mm c/c both ways with and including 4mm dia MS wire and set in cement mortar 1:4 complete all as specified & directed.

S & F in repairs vitreous china squatting pan 'Orissa pattern' size 580 x 440mm white with integral foot rest including replacement of 'P' or 'S' trap lime concrete bedding and making good floors complete all as specified and directed.

S&F EWC Pedestal pattern WC ,any colour incl EWC seat Cover,10 ltr capacity PVC ,LLFC,32 mm dia PVC flush pipe including CP Toilet holder etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed.

M & L Non skid ceramic tiles 7 to 8mm thick (square/rectangluar) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6. complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified.

Preparation of new palstered surfaces of walls and applying three coats of white wash complete all as specified & directed

M/L brick work with Fly Ash bricks built in CM 1:4 straight or curved exceeding 6m mean radius all as specified.

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM (1:4) all as specified and directed.

All as per item above, but except stone

M&L raised pointing to random or polygonal rubble uncoursed or brought upto course in CM 1:4

Demolition of stone slabs of any description or thickness in floors, aprons, etc laid, bedded and pointed in any mortar

M & L 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base all as specified and directed.

M&L for Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc all as specified and directed..

abhilasha constructions

S.R.M.K Enterprises

M/S B.SHRAVAN KUMAR

BEEGEE DESIGN SYSTEMS