Construction of Community Hall at village Purul, Senapati (Manipur)

Amount

CONSRUCTION ITEMS

M/L earth work in excavation in trenches in exc 1.5 mtr in width getting out in soil.

M/L for PCC 1:5:10 type D2 40mm graded for fdn

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level 1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement: all work above plinth level 1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size. Coln above GL 12mm Bar for footing slab,

M/L of form work to sides of fdn column Columns, piers, abutments, pillars posts and struts. Base slab. Coln

Steel reinforcement for RCC work including straightening, cutting bending, placing in position and binding all complete upto plinth level. Thermo=Mechanically Treated bars, 12mm Bar for coln and 12mm Bar for stirrups

Bricks work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in Cement Mortar 1 cement : 6 coarse sand

Brick work with common burnt clay FPS (non modular) bricks of class designation 7.5 n superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1 cement : 6 coarse sand

Half brick masonry with common burnt clay FPS (non modular) bricks or class designation 7.5 in superstructure above plinth level up to floor V level 6.13.2 Cement mortar 1 cement 4 coarse sand

Providing and laying I position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth level 1 cement: 2 coarse sand: 4 graded stone aggregate 40 mm nominal size. Including the top of surface

12 mm cement plaster on the rough side of single or half brick wall of mix 1 cement: 6 find sand. Half Brick wall upto roof, Gabble wall, Deduction, Door, Window and Steps

Steel work in built up tubular (round square or rectangular hollow tubes etc) trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Hot finished welded type tubes. MS tub 88.90mm OD = 16.80 Main post. MS tube 48.30 mm OD (purlin)

Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. Bolts 65 mm long 12 mm dia. Round washer 3 mm

Providing corrugated GS sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and GI limpet washers or with GI limpet. Washers filled with white lead, including a coat of approved steel. Primer and two coats of approved paint on overlapping of sheets. Complete (up to any pitch in horizontal/vertical o curved surfaces) excluding the cost of purlins, rafters and trusss and including cutting to size and shape wherever required. 063 mm thick with zinc coating not less than 275 gm/m2. Roof

Providing ridges or hips of width 60 cm overall width plain GS sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia GI limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/m2 meter

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) 2nd class H/wood. Door and Window

Providing and fixing glass panes with putty and glazing clips in steel doors window, clerestory window, all complete with: 4.0 mm thick glass panes. Window

Providing and fixing ISI marked oxidized MS handles conforming to IS: 4992 with necessary screw etc complete: 125mm

Providing and fixing ISI marked oxidized MS handles conforming to IS: 4992 with necessary screw etc complete: 100mm

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 100x10

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 150x10

Providing and fixing ISI marked oxidized MS sliding door bolts with nuts and screws etc. complete: 300x16mm

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: two or more coats on new work: Door and Window

Service Taxes If any

Raj Enterprises (BID ID -3156722)

RONAK SINGH (BID ID -3153043)