Annual repairs of sanitary fittngs in Boys hostels and staff quarters

Amount

P/F G.I. pipes complete with G.I. fittings (Medium Grade) & clamps including cutting holes/chases in walls and making good the same/earth work in trenches (Make Parkash Surya/Jindal). 15 mm nominal bore

------------do------------- 20 mm nominal bore

------------do------------- 25 mm nominal bore

Making connection of G.I. distribution branch with G.I mains of 25mm to 40mm nom. bore by providing & fixing of Tee by cutting & threading the pipe complete.

P/F Ball Valve (Full way valve) made of cast brass including handle 15 mm nominal size

------------do------------- 20 mm nominal size

------------do------------- 25 mm nominal size

P/F 15mm brass bib cock of approved quality weighing 400 gms.

P& F white vitreous china pedestal type (European type/wash down type) water closet pan (Parry ware /Hind ware /Cera)

P/F solid plastic seat with lid for pedestal type W.C. pan complete (Parry ware /Hind ware/ /Cera)White colour

P/F white vitreous china water closet squatting pan.( Indian type) Orissa Pattern W.C. pan of size 580 x 440 mm (Hindware/Parryware/Cera)

P/F low level PVC flushing cistern with manually controlled device (handle lever) conf. To IS: 7231 with fitting & fixtures complete (Parry ware / Hind ware /Cera) 10 Liter Capacity – White.

P/F white vitreous china wash basin including making all connection but excluding the cost of fitting Flat Back W/basin(of size 550 x 400mm)(Parry ware /Hind ware/ Cera)

P/F mirror, thickness of req. shape and size with plastic moulded frame of approved make and shape with 6 mm thick hard board backing Rectangular Shape 453x357 mm.

P/F of C. P. Pillar cock ‘Parko/Jainco/Cera Make’ 15 mm (nominal size)

P/F of PTMT Pillar cock ‘Prayag Make’ 15 mm (nominal size) 107 mm long weighing not less than 110 gms.

P/F CP brass bibcock of ‘Parko/Jainco/Cera Make’ 15mm nominal bore

P/F PTMT bibcock of Prayag Make 15mm nominal bore, 86 mm long weighing not less than 88 gms.

P/F CP brass angle valve for basin mixture Geyser points/washbasins of ‘Parko/Jainco/Cera Make’ 15mm nom. Bore

P/F PTMT angle valve/stop cock for basin mixture Geyser points/washbasins of ‘Prayag Make’ 15mm nom. Bore, 86 mm long weighing not less than 88 gms.

P/F of C. P. Phase for Pillar cock/Bib Cock ‘ISI Make’ 15 mm (nominal size)

P/F of PVC waste pipe for sink or wash basin including P.V.C. waste fitting complete Semi Rigid Pipe 32/40 mm

P/F PTMT Grating (Prayag Make) 100mm dia Circular Type

P/F phase/jumper washer

P/F C.P waste coupling of 32/40 mm nom size for steel sink/washbasin of approved quality (ISI).

P/F PTMT waste coupling of 32/40mm nom size for wash basins/sink coupling 38 mm of 83 mm length and 77 mm breadth.

P/F of unplasticised PVC connection pipe with bass union 45 cm length & 15 mm nom. bore.

P/F white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm & 340 x 410 x 265 mm sizes resp.

P& F CP jet with PVC pipe to be fixed with WC

P/F of P.V.C. siphon set to be fixed in cistern of approved quality

P/F of PVC cistern bend pipe of standard size

Providing and fixing PTMT shelf 440mm long, 124mm width and 36mm height of approved quality, colour and make, weighing not less than 300 gms (Prayag Make).

P/F of low level cistern Handle (PVC) of approved quality.

Providing and laying PVC pipe superior quality of following dias (Uniplas, Supreme, Finolex make) 4 kg/cm2 pressure in ground/on walls in case of Rain Water Pipe including all PVC fittings jointing with adhesive of approved make ,making good the same etc. complete. Nothing extra shall be paid. 80mm

P/F PVC bend of Supreme/Prince/Uniplas Make 80 mm

P/F of G.I Accessories ISI marked for repair work. Socket 15 mm

-------------do------------ Socket 20 mm

-------------do------------ Reducer Socket 32 mm

-------------do------------ Elbow 15 mm

-------------do------------ Elbow 20 mm

-------------do------------ Elbow 25 mm

-------------do------------ Elbow 32 mm

-------------do------------ Nipple 15 x 75 mm

-------------do------------ Nipple 15 x 100 mm

-------------do------------ Nipple 15 x 150 mm

-------------do------------ Nipple 15 x 230 mm

-------------do------------ Nipple 15 x 300 mm

-------------do------------ Nipple 20 x 75 mm

-------------do------------ Nipple 20 x 150 mm

-------------do------------ Nipple 20 x 300 mm

-------------do------------ Nipple 25 x 75 mm

-------------do------------ Nipple 25 x 150 mm

-------------do------------ Nipple 25 x 230 mm

-------------do------------ Tee 15 mm equal

-------------do------------ Tee 20 mm equal

-------------do------------ Union 15 mm

-------------do------------ Union 20 mm

-------------do------------ Union 25 mm

Providing and fixing PTMT towel rail including end brackets cost of wooden/PVC plugs with screw complete of size 600 x 20 mm of approved make. (Prayag or equivalent).

Providing and fixing PTMT soap dish of approved quality and make. (Prayag or equivalent).

Providing and placing on terraces Polyethylene water storage tank ISI: 12701 marked with cover & suitable locking arrangement & making necessary holes for inlet outlet & overflow pipes but without fittings of Sintex/Star/ Lotus make.

P/F Soil waste and vent pipes sand cast iron S&S pipes:- 100 mm dia

-------------do------------- 75 mm dia

P/F plain bend of required degree sand cast iron S&S. IS 1729 100 mm dia

-------------do------------- 75 mm dia

P/F M.S holder bat clamps of approved design to sand cast iron pipe embedded in & including cement concrete (1:2:4) block of 10x10x10cm including cost of cutting holes & making good the walls. 100 mm dia

-------------do------------- 75 mm dia

Providing and fixing Collar: Sand cast iron S&S. IS 1729 100 mm dia

-------------do------------- 75 mm dia

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fitting of following diameter including cost of lead and testing of joints complete 100 mm dia

-------------do------------- 75 mm dia

Providing and fixing PVC Floor trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors. 100 mm inlet and 100 mm outlet

------------do---------- 100 mm inlet and 75 mm outlet

P/F Salem Stainless Steel A ISI 304 kitchen sink as per IS 13983 with C.I brackets and stainless steel plug 40mm including painting of fitting & brackets & cutting & making good the walls wherever required 610x460mm & Bowl depth 178 mm.

P/F of C.P shower rose with 15/20 mm inlet including rod with necessary plugs and screws. 100 mm dia

P/F of PTMT shower rose with 15/20 mm inlet including rod with necessary plugs and screws. 100 mm dia

Dismantling old floor traps & refitting the same with C.Conc.1:2:4 including jointing the waste water line including labour & material complete.

P&F of P.V.C. water tank covers on existing water tanks of standard size.

P/F of C.P. cup

P/F of C.P. nipple 50mm long & 15mm nom bore

Making C. concrete platform for Indian W.C. seat complete including cost of material & labour.

P/F of C.P. long bend for Low Level cistern

Cleaning of Manholes including clearing of drain pipes from manhole to manhole for making the lines fully functional and disposal of mulba from the site as directed by the engineer Incharge.

Cleaning of overhead water storage tanks upto floor-5 level (Steel/PVC/Concrete) by using detergent powder including rubbing/scrubbing of the following capacity:- Upto 2000 Ltrs.

----------do-------- Exceeding 2000 Ltrs.to 5000 Ltrs.

P/F PTMT Ball cock of approved quality Epoxy coated aluminum rod plastic ball (Prayag) 15 mm

Providing and fixing Ball Cock for cistern. 15 mm

Providing and fixing unplasticised PVC connection pipe with PTMT nuts of approved quality, colour 15 mm nominal bore with 30/45cm length

M/S KAMA DEV SAMAL

RAJ KUMAR SALGOTRA

Tarun Vir Singh Manhas Contractor