SPECIAL REPAIR OF BUILDING NO P-109 AT SPROX COMPLEX OF ACC and S AND PROVN OF CHAIN LINK FENCING (600 MTR X 6 FEET HEIGHT) IN UNIT AOR OF 58 COY ASC (SUP) IN THE AREA OF AGE B/R II UNDER GE(N) AHMEDNAGAR

Amount

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Demoliton of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for 75 mm thick Plain Cement concrete type D-2, 1:4:8 (40mm graded aggregate) in sub base

M&L for Vitrified Ceramic tiles joint free 10 mm thick (Square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 Sqm (Size of tile 600x1200mm) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed layer in CM 1:6.

All as item No 4 above but on skirtting over and including 10 mm thick back layer in CM 1:4.

M&L for Glazed ceramic Coloured joint free tiles in vertical surface 300x600x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match. over and including 10 mm thick back layer in CM 1:4.

M&L for Non Skid ceramic coloured jount free tiles 7 to 8 mm thick,(Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed layer in CM 1:6 15 mm thick

M&L for 20 mm thick Granite (of any tpe) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. over and including screed layer in CM 1:6 15 mm thick

Labour for Rounding to edges of stone/granite slabs one edge, such as in steps, cooking platform, and other similar situations.

M&L for Machine cut cudappa stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Taking down Chowkats or frames with shutters (without taking off shutters from the frames)not exc. 1.5 sq. m each

Taking down Chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but n exc 4.00 Sqm each

M&L for Powder Coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

M&L for Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified

Supply and fix Factory made single extruted WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other frames chowkat of size 50x125mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/cum and screw withdrawal strength of 2200 N (face) ( 1100 N (Edge), minimum compressive strength 58 N /mm², modulus of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire resistant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge

Supply and fixing Factory made single extruted WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/cum and screw withdrawal strength of 1800 N (face) ( 900 N (Edge), minimum compressive strength 50 N /mm², modulus of elasticity 850 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire resistant and fixing with stainless steel butt hinges in position with MS hold fast/lugs/SS dash fasteners all as per Engineer-in-charge

S&F for 19/20mm PVC shutter Colour PVC prelaminated board fixed to timber frame worka as in cup boards shutters/shelves/pelmets box and similar items etc complte all as specified and directed by Engineer-in-Charge

S&F for in repaire Auto closing hinges 35mm of o crank (KH-001) ir 8 crank (KH=002) openable at 110 degree for kitchen cabinet shutters fixed complete as specified and directed

S& 100 mm long hinges medium weight cold rolled

Supply and fix Continuous (piano) hinges, mild steel, bright finish or electrogalvanised as in cupboard shutter 30 mm

Supply and fix aluminium anodised handles of extruded section 150mm long.

Supply and fix 40mm dia cupboard knobs fixed with nut, screws and washer of brass, polished fixed in repairs.

Supply and fix aluminium anodised barrel tower bolt of extruded section 150mm long.

Supply and fix 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed

M&L for 5.0 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq.m in each

S&F for Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15 mm

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store mm

Supplying & laying in trenches Polyethylene (PE-AL-PE) compositic pressure pipes including all Crimp type internal sealing Plastic - Metal Composite fittings (such as elbows, toes, reducers etc) complete.outer bore 16mm

Supplying & laying in trenches Polyethylene (PE-AL-PE) compositic pressure pipes including all Crimp type internal sealing Plastic - Metal Composite fittings (such as elbows, toes, reducers etc) complete.outer bore 20mm

S&F for 32mm bore Low density polethylene pipes (LDPE) of pressure rating 6 kfg/cm2 laid in trenches

S&F for in repairs 15mm Bib taps, cast copper alloy with crtuch or butterfly handle,fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F for in repairs 15 mm Pillar taps, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S&F for in repairs 15mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed

S&F in repairs for health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S&F for in repairs 15mm Stop valves, cast copper alloy screwed down high presure, ancy type, chromium plated with long shank and cup (conncelaed type) with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F in repairs 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors

S&F in repairs 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors

S&F for in repairs 75 mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement

S&F for in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with and including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device

S&F for in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets

S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm excluding ditto but including brackets including pedstal

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

S&F in repairs Harrison rails,mild steel, chromium plated with fixing brackets, stops, rollers etc.

S&F for in repairs 300mm, ordinary rat tail rod patttern springs including roller and roller plate complete

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

Rendering 15 mm thick in CM 1:6 on fair faces of brickwork or concrete surfaces and finished even and smooth with using birla putty

Rendering 15 mm thick in CM 1:4 on fair faces of brickwork or concrete surfaces and finished even and smooth without using extra cement with and including WPC @ 3% of weight of cement

Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of chalk primer on walls

Preparation of new plastered surfaces and applying two coats of oil bound emulsion over a coat of chalk primer on walls over a coat wall care putty

Preparation of old plastered surfaces and applying two coats of oil bound emultion on walls over a coat of wall care putty

Preparation of old plastered surfaces and applying two coats of oil bound emultion on Ceiling

Preparation of old wood and wooden based surfaces of any descripntion otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint

Excavation in post holes (or similar holes) each not exceeding 0.50 cum in hard/dense soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundations filling and mass concrete etc..etc complete all as specified & directed.

Supply, fabricate, erect and fix in position mild steel work Fe-410-0 or Fe-310-0 grade, as in fencing post/Struts including drilling holes complete all as specified and shown on drawing.

M&L for mild steel deformed bars 10mm dia & over cut to length bents to shape including cranking, bending spirally for hopping for columns hooking ends & binding with MS wire annealed not less than 0.9 mm dia or security with clips.

Supply only chain link fencing of any size, mesh and type as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire as specified and directed.

S& F 10mm dia MS bolts screw machine made with hexagonal or square head at one end and screwed the other or screwed both ends , each screwed end to be fitted with washer and one hexagonal or square nut 5cm long etc complete all as specified & directed .

M & L for preparing steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Taking down carefully copper/aluminum point wiring (light/fan/bell/socket, power point etc) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors etc complete all as specified and directed Engineer-in-Chage

M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sq mm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable drawn in and incl PVC Casing and capping ISI Marked with its accessories PVC boxes (upto 12 module suitble for Mylinc series of Legrand including white plates with frame upto 12 module of make suitable for Mylinc Series ) for fixing switches/socket/regulators etc incl 1.5 sq mm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable as earth continuity conductor to common earth & connecting to earth dolly for the following, all as specified and directed. Note : 1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, ceiling lights, bulkhead lights, bldg security light etc

One light point controlled by switch 5 Amp single pole one way

One fan point controlled by switch 5 Amp single pole one way

One bell point controlled by one switch 5 Amp single pole, one way on independent board

One 3 pin 5 Amp socket outlet on same board controlled by one, one way 5 Amp switch

One socket outlet 5/3 pin 5 Amp controlled by one switch on independent board

One light point controlled by switch 5 Amp single pole two way

All as per Item No 2 (here-in-before) but with 2.5 Sqmm Copper conductor cable for Phase , Neutral and Earth for one 3 pin, 15 Amp socket outlet on independent board

S&F bell Multi music type elelctric 230V AC single pole etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Switch, 6 Amp, one way, one Module. etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Switch, 6 Amp, two way, one Module. etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Switch, 16 Amp, onw way, one Module. etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Socket Outlet 6 Amp, 2/3 pin, combined two module etc complete all as specified and directed by Engineer-in-Charge.

S&F Modular Socket Outlet 6 Amp / 16 Amp - 2/3 pin combined two module etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Bell push, 6 Amp, one module etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Fan Regulator Fan step regulator, 120 Watt - two module etc complete all as specified and directed by Engineer-in-Charge

Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting etc complete all as specified and directed by Engineer-in-Charge

M&L ceiling rose 3 terminal / PVC / polycarbonate, isolated body etc complete all as specified and directed by Engineer-in-Charge

S & F in replacement double door Sheet metal enclosures factory made VT DBs 4 way TPN, 415 volts Concealed in Wall,protection class IP-42, suitable for fixing of MCBs etc, Including 100 Amps MCCB ,25 KA confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed.

S & F in replacement double door Sheet metal enclosures factory made DBs SPN, 8 way ,240 volts ,protection class IP-42, suitable for fixing of MCBs,, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed.

Supply & fixing MCB , SP, AC, 240 Volts of 06 to 40 Amp capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

Supply & fixing MCBs, SPN, AC, 240 volts of 40 Amps capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

Supply and fix ultra slim square profile LED lighting fixture, environmental friendly, energy efficient ready to use pack Industrial type LED Tube light fitiing 20 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with and including 2 core sheathed copper conductor cable of size 0.5 Sqmm with complete with all accessories etc complete all as specified and directed by Engineer-in-Charge Make :Bajaj/Crompton/Phillips

S&F Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack LED Tube light fitiing 10 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with 2 core seathed copper conductor cable of size 0.5 Sqmm with etc complete all as specified and directed by Engineer-in-Charge Make : Philips / Wipro / Crompton

Supply & fix in replacement energy saving and environmental friendly long life LED street light 25 Watt (Bldg security light) made up of pressure die cast aluminium housing with mild power LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP65 protection and impact resistance of IK07 fixed on wall with GI pipe of suitable dia and all fixing accessories including connecting up with & including twin core twisted flexible copper conductor cable of suitable size of 230V , 50 HZ etc complete all as specified and directed by Engineer-in-Charge

S&F sub main wiring with two single core PVC insulated,unsheathed, FRLSH stranded copper conductor cable 6 Sqmm with 6 Sqmm PVC insulated, unsheathed, FRLSH stranded copper conductor cable as earth wire drawn through and including PVC Casing and capping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directed by Engineer-in-Charge (Make of Cable : Finolex/RR Cable/Havells & Make for PVC Casing & Caping : AKG/PRESTOPLAST/PRECISION): - Note : 1. Proper colour coding must be utilize for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. Two run of 6 sq.mm cable i.e for one run for phase, one run for neutral with one run of 6 Sqmm cable for earth and one run of PVC Casing & caping shall be measured as one unit

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. Earth pit not less than 2.25 m depth and top edge of the earth plate not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nuts, bolts & washer etc. Earth wire connected upto main earth point / DBs alongwith 15mm dia earth protection pipe from top edge of the earth plate to main earth point to be connected and 20mm dia watering pipe light grade with funnel and provn of PCC using cement concrete (1:2:4) mix type B1 using granded stone aggregate and RCC pit cover 50 mm thick precost RCC (1:2:4) mix type B1 duly reinforced with 8 mm dia of TMT bar @ 100 mm CIC, both way, lifting arrangement complete including all necessary earth work etc complete all as specified and directed by Engineer-in-Charge

M & L for Supply,laying ,connecting ,testing and commissioning and jointing , LT underground cable in replacement ,1100 volts grade, XLPE insulated, armored with galvanized round steel wire or steel strip, electric power cables heavy duty, with multi stranded aluminum conductor, laid in ducts, fixed on poles/walls with proper size saddles and clamp complete all as specified and as directed by the Engineer-in-Charge of following Sizes :-

(a) LT cable 35 Sqmm, 3.5 core.

Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 m in depth and getting out in hard/dense soil etc complete all as specified and directed by Engineer-in-Charge

Returnig, filling in including spreading, levelling, watering and well ramming in layers, n exc 25 cm thick in soil etc complete all as specified and directed by Engineer-in-Charge

Removing exacavated soil to a distance n. exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point etc complete all as specified and directed by Engineer-in-Charge

Supply &lay HDPE pipe 40 mm bore for laying of LT cable complete with all accessores etc complete all as specified and directed by Engineer-in-Charge

Taking out/down and opening of existing ceiling fans 1200 mm sweep,from any position, of any make etc and depositing to E/M store yard,and Supply and fix new ceiling fan 5 star BLDC 1200 mm complete all as specified

Taking out/down and opening of existing Geyser and deposit to E/M Store yard and S& F new geyser 25 ltrs Capacity ,5 Star 2 KW heating element ,connection pipe,stop cock ,2 set With all accessories all as directed

S & F Industrial type switch socket including 20 Amps MCB Completeall as directed.

M/s Meher Construction

MS. G.A. CONSTRUCTION

M/s. N D Karande

M/S. M. F. Sharif & Co.

M/S VISHWAJEET SHANKARRAO KULKARNI

R. T. Saluji

DAKSH ENGINEERS AND BUILDERS