Procurement of Equipment under PM USHA Scheme University of Ladakh Supply Installation Testing and Commissioning of two Units Leh Campus and Kargil Campus of IoT and UAV Labs

ESP32 Dev Board (ESP32-WROOM-32) (ESP32-WROOM-32 WiFi + BLE)

'Arduino Uno R3 (ATmega328P)

Arduino Nano ESP32 / Nano 33 IoT( ARM Cortex-M0+ WiFi/BLE)

NodeMCU ESP8266 (ESP32-C3)

Raspberry Pi 4 (4GB) (4GB/8GB RAM SBC)

Raspberry Pi 5 (8GB) (8GB RAM BCM2712)

DHT22 (AM2302) Temp & Humidity (humidity ±2%RH (Max ±5%RH); humidity 0-100%RH)

HC-SR04 Ultrasonic Sensor (Ranging Distance: 2cm - 4m; 15mA)

PIR Motion Sensor (HC-SR501) (Distance Measure (cm): 300 ~ 700; Operating Voltage (V):4.5 to 20)

MQ-135 Air Quality Sensor (operates at 5V; digital and analog output pin)

Soil Moisture (Capacitive) (compatibility with a Raspberry Pi; operating voltage range of 3.3 ~ 5.5V.)

BMP280 / BME280 Pressure Sensor (Operating Pressure 300 hPa to 1100 hPa; -40 to +85 deg. Celsius)

BH1750 Light Sensor (1 lux to 65535 lux; Communication Mode:I2C)

VL53L1X Time-of-Flight (ToF) Sensor (Measuring Range: 40mm – 4000mm (4m); Operating Voltage: 2.6V – 5V (3.3V/5V logic compatible)

MPU-6050 IMU Sensor (3-aixs accelerometer and 3-axis gyroscope; 3-5V)

Hall Effect Sensor (A3144) (Operating voltage: typically 5V.; Operating temperature: -40°C to 85°C.)

RFID RC522 Module (SPI Data Transfer Rate: Max. 10Mbit/s; mifare1 S50, mifare1 S70, mifare UltraLight, mifare Pro)

4-Channel Relay Module (5V) (3 Outputs per Relay: NO, NC and C; 10A @ 250 VAC)

SG90 Servo Motor (Stall torque @4.8V : 1.2kg-cm; 360d rotation

Stepper Motor (NEMA17) + A4988 driver (kit) (Rate Current: 1.5-2.0A; Step Angle: 1.8° ± 5% )

L298N DC Motor Driver (copatible with Arduino and Raspberry Pi; )

DC Motors (small) (Operating Voltage: 3 to 6VDC)

LoRa Module (SX1276) (Operating Voltage: 3 to 6VDC;Excellent blocking immunity; FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.)

NB-IoT / SIM7000E Module (Supports TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail, etc; ‎Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+)

BLE Beacon (BLE 5.0) (Long Range BLE 5.0; ‎Bluetooth)

Raspberry Pi Camera Module V2 (8MP) (Supports 1080p30, 720p60 and 640x480p90 video; compatible rasberry pi latest version)

USB Microphone Array / ReSpeaker (Sensitivity: -26 dBFS; Power Supply: USB 5V, external 5V

Google Coral / Intel NCS2 (Edge TPU) (Dual Edge TPU; -40 to +85°)

Jetson Nano / Orin Nano (edge AI) (4GB/8GB memory)

Raspberry Pi AI HAT / AI expansion (Compatibility: Raspberry Pi 5 (required), Raspberry Pi OS support; AI Performance: Up to 26 TOPS )

Digital Oscilloscope (100 MHz) - Rigol/Siglent class (100 MHz bandwidth; TFT-LCD display with 800 * 480 resolution)

'Logic Analyzer (8-ch USB) (Input feature: 5PF,100K Ohm.;for MCU, ARM system and FPGA development)

Bench Power Supply (0-30V, 5A) (OVP/OCP protection; usb interface;0 – 30)

Digital Multimeter (Auto-ranging) (minimum count of 4000;DC/AC Current Measurement: Up to 10A)

'Soldering & Rework Station (ESD-safe) (60watt; temperature adjustment)

Breadboard + Jumper Kit (full-size) (for Experimenting With Circuit Design In Labs;wire sizes 20-29 AWG)

PCB Prototyping Kit / Mini Fab (2.54mm Hole Pitch; Single-Sided)

Smart Home AI IoT Demo Kit (working voltage 7.4~8.5V comm: wifi)

Smart Agriculture IoT Demo Kit (Soil Moisture Sensor;IoT-Based Smart Agriculture Monitoring )

Industrial IoT Trainer Kit (embedded system programming; with sensors)

ACEBOTT Smart Farm Kit (connectivity: Wi-Fi | Bluetooth LE; Interfaces: UART | I2C | SPI | CAN)

6-DOF Articulated Robotic Arm (4.8–6.8 V;Pulse; standard PWM control)

FDM 3D Printer Bambu Lab (Print Size (L x W x H) (mm):256 x 256 x 256 Filament Supports: ABS, ASA, PA, PC, PET, PETG, PLA, PVA, TPU Supported Nozzle size (mm):0.2, 0.4 (Included) Hotend Temperature (°C):300 )

Remotely Controlled Aircraft (RC Aircraft) (RC Aircraft with 1.6m Wing Span and range of 1 to 2 kms and payload capacity of 200 to 300 grams. Components: BLDC Motor, LiPo Battery ,2.4Ghz 6CH Transmitter and Receiver

FPV Racing Drone (First Person View (FPV) Racing Drone with 5.8Ghz Wireless Goggles for Live Video and range of 1 to 2 kms and payload capacity of 200 to 300 grams. Components: 250mm Racing Frame, BLDC Motor, LiPo Battery ,2.4Ghz 6CH Transmitter and Receiver

Quadcopter UAV (Quadcopter UAV is a manually operated UAV for training and experiment purpose. It has a payload capacity of 200 to 300 grams and range of 1 to 2 kms. Components: Frame with landing gear, BLDC Motor, LiPo Battery ,2.4Ghz 6CH Transmitter and Receiver

Autonomous Quadcopter Drone with wireless 4k HD camera (Autonomous Quadcopter Drone with wireless HD camera is an autonomous drone for carrying out pre-defined missions and it can be used for carrying out experiments and research. It has the payload lifting capacity of up to 500 grams and range of 1 to 2 kms. Components: 650mm Frame with landing gear, BLDC Motor, LiPo Battery, 2.4Ghz 6CH Transmitter and Receiver, Wireless 4k HD camera with Gimbal, Autonomous Flight Modes for automatic flight.

Hexacopter Aerial Vehicle (Hexacopter Aerial Vehicle is a manual operated UAV with Six motors or Hexa configuration. It is used for research activities with a higher payload lifting capacity of up to 600 grams. It has the range of 1 to 2 kms. Components: Frame with landing gear, BLDC Motor, LiPo Battery ,2.4Ghz 6CH Transmitter and Receiver

Parachute Unmanned Aerial Vehicle (Tri-Wheel structure with single motor and 1.5m parachute, servo, LiPo Battery ,2.4Ghz 6CH Transmitter and Receiver)

DIY Quadcopter UAV Kit (DIY Quadcopter UAV kit is for the students to learn the basics of drones, its components, integration and calibration procedures. Components: F450mm glass frame Quad with landing gear, BLDC Motor, LiPo Battery ,2.4Ghz 6CH Transmitter and Receiver with range of 1-2 km, Payload lifting capacity 200 – 300 grams)

Drone Simulator (Drone Simulator Software with USB Remote Control for practicing the flying in the computer to learn and get the control of the drone before going for real flight.)

Thrust Measurement System (An experimental setup of thrust Measurement up to 10 kg. It will measure the Current and power required)

Static Autopilot Mock Model (1.5 m wingspan static fixed wing aircraft model to display the functions of autopilot system)

Autopilot & Communication System (A set of Autopilot and communication system which includes Pixhawk Flight Controller, GPS, Mavlink Communication, Power Module )

Drone Frames (S500mm glass fiber Quad frame)

Drone Frames 'F550mm glass Fiber Hexa frame

Drone Frames Racing Drone frame 250mm

Drone Frames Carbon Fiber Quad Frame 650mm

Flight Controllers (QQ Super Thunder, KK 2.1)

Tools, Machinery, Miscellaneous and spares (Drilling Machine Bench press)

Tools, Machinery, Miscellaneous and spares 'Bosch Angle Grinder GWS 600

Tools, Machinery, Miscellaneous and spares Bosch Drilling kit GSB 600

Tools, Machinery, Miscellaneous and spares Bosch Zig Saw GST 680

Tools, Machinery, Miscellaneous and spares Filing tools

Tools, Machinery, Miscellaneous and spares Allen Key sets

Tools, Machinery, Miscellaneous and spares Soldering Station

Tools, Machinery, Miscellaneous and spares Cutting Mat

Tools, Machinery, Miscellaneous and spares Professional Battery Charger

Tools, Machinery, Miscellaneous and spares Digital Anemometer

'Tools, Machinery, Miscellaneous and spares 'Power Distribution Board

Tools, Machinery, Miscellaneous and spares LiPo Bag and LiPo Battery Checker

Tools, Machinery, Miscellaneous and sparesDigital Calliper

Tools, Machinery, Miscellaneous and spares Flat weighing scale

Tools, Machinery, Miscellaneous and spares'Electronic Hanging Balance

Tools, Machinery, Miscellaneous and spares Peg board with tools

Tools, Machinery, Miscellaneous and spares Golden Connectors -3.5mm

Tools, Machinery, Miscellaneous and spares Soldering rods with variable temperature, flux, soldering lead

Hot glue gun with glue sticks

Tools, Machinery, Miscellaneous and spares Screws, washer, nuts, cycle spokes rod, control horns, Cutters, Fibre and Insulation Tapes, Zip tags

Tools, Machinery, Miscellaneous and spares Safety Gears

Microcontroller and sensors (Arduino Controller Board)

Microcontroller and sensors (Raspberry Pi 4 2 GB RAM)

Microcontroller and sensors ( 'Data Shield)

Microcontroller and sensors (Sensor Kit)

Microcontroller and sensors ( ESP32 V1.0 IoT Module)

Microcontroller and sensors ( M5 Stack Core 2 IoT Development Kit)

Microcontroller and sensors (TF Luna LiDAR Distance sensor)

Microcontroller and sensors ( 'NVIDIA Jetson Nano Kit)

Materials for Making Drone (16mm Carbon Fiber Tube, , , Balsa Wood)

Materials for Making Drone ('2mm Carbon Fiber 'Materials for Making Drone Sheet 'Materials for Making Drone 300mmx200mm)

Materials for Making Drone (Choro sheets 3mm 4ft x 3ft)

''Materials for Making Drone (Aluminum Tubes)

'Materials for Making Drone ('Aluminum Composite 3mm 300mmx200)

Please Enable Macros to View BoQ information