REPAIR OF RCC CHHAJJA PERAPET WORK INCLUDING REPAIR TO CEILING OF ROOF, CONNECTED ITEMS,CAMOUFLAGE AND EXTERNAL PAINTING TO BLDG IN ZONE A IN TECHNICAL AREA AT AF STN JAISALMER

Amount

M&L for applying to the damaged concrete portion of slab/columns/chajjas/parapet/roof projection/ , balcony/staircase at any height including remove/demolished loose concrete material with single component, fibre reinforced, dual shrinkage compensated, thixotropic,cementitious ptch repair mortar CICO Repocem PM (having the technical parameters mentioned in material specifications) capable of applying upto 25-30 mmthick in double layer initially by hand and finishing with troweled carefully compacting the same around the rebar and finishing to bring it in line with existing concrete surface with an average specified thickness and Equivalent of Fosroc Renderoc/MYK arment/BASF complete all as specified and directed by Engr -in-Charge.

Taking down cement plaster of any description built in cement mortor complete all as specified

M&L for 15mm thick external rendering in CM 1:4 on stone masonry or other than fair faces of concrete / brick is to be finished even and smooth (without using extra lime or cement) complete all as specified.

Supply only water proofing compound complete all as specified.

M&L for preparation of newly plastered of wall surfaces and applying two coats of cement based paint over a coat of cement primer in different tints in sigma / camouflaging pattern as approved complete all as specified.

M&L for rendering 10 mm thick in cment mortor 1:6 on fair faces of brick work or concrete surfaces is to be finished even and smooth w/o using extra cement complete all as specified.

M&L for preparation of new plastered surfaces of any description and applying two coats of oil bound distember over chalkwhitening on plastered surfaces.

M&L 5mm thick rendering on concrete surfaces of ceiling,soffits of chajjas/drop & roof projection facia etc.in CM 1:3 finiched even and smooth with out using extra cement complete all as specified.

M&L for applying 3mm thick wall care putty on ceiling surface complete all as specified

M&L for prepration of new surface plastered or unplastered applying three coats of White washing on ceiling,soffits of chajjas/drop & roof projection facia etc complete as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing, serviceable tiles to stone and rubbish off the premises all as specified and directed.

Vitrified ceramic tiles 9mm to 10 mm thick light shade (square/rectangular) polished area of each tiles not exceeding 0.36 sqm in floors etc set and jointing in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6)complete all as specified and directed.

Glazed ceramic coloured tiles in vertical surface 300 x 200 x 6-7 mm / 450 x 350 x 6-7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed

Non skid coloured tiles (1st quality/premium quality) 9 to 10mm thick of size 600 mm x 600 mm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cement mortar (1:6) icomplete all as specified and directed.

Dismantling wall and ceiling boards any thickness, including cover fillets complete all as specified.

Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturer instructions and two coat of oil bound dfistemper incl preparation of newly untreated surface, GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre.

S&F 12 mm thick Perforated particle board/tiles for insulation and acoustic purposes, 60x60 cm in size, fixed with screws to ceiling timber frame work or with staples on snap grid complete all as specified.

S&F anodised aluminium snap grid (size 605 x 605 mm) frame work for false ciling all as specified.

M&L preparation of old painted steel surfaces over 10 cm in width or girth as in steel gate, fencing post, gates hangars, steel door etc and applying one coat of synthetic enamel paint with appropriated arrangements of shuttering to reach upto height of hangars complete all as specified and directed.

Demolition of Brick work of stone/boulder masonry, built in cement mortar excluding ashlars facing dressed stone work and pre-cast concrete etc complete all as specified.

M&L for square rubble walling Jodhpur type brought up to courses well bonded, bedded and solidly hearted in cement morgtar 1:6 etc complete all as specified.

Labour only for hammer dressing to face stones with maximum depressions on face from a stright edge not exc. 20 mm and dressing face beds and joints as specified to SR walling Jodhpur type brought upto courses complete all as specified.

M&L for keyed pointing in cement and mortar (1:4) to square rubble masonry coursed or brought upto courses etc complete all as specified and directed.

M&L for preparation of old treated/decorated external wall surfaces of any storeys / height and applying one coat of cement based paint in different tints in sigma/camouflage pattern as approved complete all as specified and directed.

M&L for preparation of old treated/ decorated external wall/roof surfaces of any storeys / height of any description and applying one coat of exterior emulsion paint (weather coat) 1st quality in different tints/shades in sigma/ camouflaging pattern as approved complete all as specified & as directed.

M&L for preparation of old treated/decorated external wall surfaces of any storeys / height and applying one coat of cement based paint in different tints in sigma/camouflage pattern as approved complete all as specified and directed.

M&L preparation of old painted steel surfaces over 10 cm in width or girth as in steel gate, fencing post, gates hangars, steel door etc and applying one coat of synthetic enamel paint with appropriated arrangements of shuttering to reach any height of bldgs complete all as specified and directed.

M&L for preparation of old treated/ decorated external wall/roof surfaces of any storeys / height of any description and applying one coat of exterior emulsion paint (weather coat) 1st quality in different tints/shades in sigma/ camouflaging pattern as approved complete all as specified & as directed.

M&L for preparation of old decorated surfaces of walls of any description and applying one coat of white wash etc. complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old decorated surfaces of ceilings of any description and applying one coat of white wash etc with appropriated arrangements of shuttering/ladder. complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old decorated wall surfaces of any description and applying one coat of oil emulsion distemper of different tints in sigma/camouflage pattern as approved complete all as specified and directed.

M&L for preparation of old decorated ceiling surfaces of any description and applying one coat of oil emulsion distemper of any tint etc complete complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted wooden surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint of any tint etc complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc.

M&L for 15mm thick external rendering in CM 1:4 on stone masonry or other than fair faces of concrete / brick is to be finished even and smooth (without using extra lime or cement) complete all as specified.

M&L for internal rendering 10mm thick on concrete surfaces of any description in cement mortar (1:6) is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for applying 3mm thick wall care putty on wall surface complete all as specified.

M&L for preparation of newly plastered of wall surfaces and applying two coats of cement based paint over a coat of cement primer in different tints in sigma / camouflaging pattern as approved complete all as specified.

M&L for preparation of new treated/ decorated external wall/roof surfaces of any storeys / height upto 10m of any description and applying two coat of exterior emulsion paint (weather coat) over one coat primer 1st quality in different tints/shades in sigma/ camouflaging pattern as approved complete all as specified & as directed.

M&L for preparation of newly plastered of wall surfaces and applying two coat of oil emulsion distemper over a coat of cement primer in different tints in sigma / camouflaging pattern as approved complete all as specified.

M&L writing letters or figures(Block,roman,Italic or Indian letter n.exc 30cm high) complete as directed by Engineer-in-Charge.

M&L preparation of old painted concrete surfaces over 10 cm in width or girth as in kerb stone,concrete floor etc and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for rendering 10mm thick in repair on concrete surfaces as kerb stone etc of any description in cement mortar (1:4) is to be finished even and smooth (without using extra lime or cement) incl grooving complete all as specified and directed.

M&L preparation of new plastered concrete surfaces over 10 cm in width or girth as in kerb stone,concrete floor etc and applying two coat of synthetic enamel paint over one coat of primer complete all as specified and directed.

M/s Sati Jasnath Enterprises

M/S SIDHU CONSTRUCTION COMPANY

AMBEY MAA CONSTRUCTION COMPANY

M/S MAYA CONSTRUCTION COMPANY

M/S VISHNOI ENTERPRISES