Ward 24 Construction of road feom anurag stationers to monu chawal wala

Cartage of Ballast, Kankar, Coal, Grit or Sand 1 etc. including loading and unloading but excluding stackings on pucca roads. Upto 8 Km.

Providing laying spreading and compacting stone aggregates of 53mm to 22.4mm size to water bound macadam specification including spreading in uniform thickness hand packing rolling with 3 wheeled steel/ vibratory roller in stages to proper grade and cambe

Providing and laying Dense Graded Bituminous Macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specification clause No. 505 complete in all respects.i/c all taxes, labour cess, levy, royalty excluding GST

Providing and applying Tack Coat with bitumen using bitumenn VG-10 pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.i/c all taxes, labour cess, levy, royalty excluding GST.

Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading. premixed with bituminous binder VG-30 @ 5.40 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with mechanical control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509

Road marking with Hot Applied thermoplastic compound with reflectoriesing glasss beads on bituminous surface (Reporated/ Tranvers bar) providing and laying of hot applied thermoplastic compound mm thick including reflectorising glass beads@250 gms per sqm area. thickness of 5mm is exclusive of surface applied glass beads as per IRC : 35-2015 The finished surface to be level uniform and free from streaks and holes.

Reflective Raised Pavement Marker Providing and fixing of raised pavement markers (Cat Eye) Type x-ASTMD-4956-04 Avery Dennision/3m(USA Make) having moulded body of polycarbonate, ASA, HIPS or ABS able to support a load of 13.635 M.T. tested in accordance with ASTMD 4280 type H and other requirement mentioned in MoRT&H Circular, its reflective lens made of micro prismatic lens (capable of providing total internal reflection of light), electronically welded to the body. The length, height and width of the body shall not 7 exceed 130 mm, 20 mm and 105 mm respectively, The area of each reflective surface shall not be less than 13 Sq. cm. on each side sloping at the angle of 35 +5 degree to the base to ensure maximum reflectively, it shall comply to specification of Category A of MoRT&H circular no. RW/NH 33023/10/97-DO-III dated 11.06.97 lenses shall be moulded of methyl methecrylate conforming to ASTMD 788 or equivalent. With 7 years warranty. Rate shall be inclusive of all taxes, royalty, etc. All T&P/machine material and labour required for proper completion of work