Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | FIRST₹43.5 LAccepted-AOC 704 SILVER DEAL DAFFODIL WING 1 B T KAWADE ROAD PUNE 411 001 | PUNE | PUNE | MAHARASHTRA | 411001 | FIRST | Accepted-AOC BEING LOWEST | |
| 2 | SECOND₹45.7 LRejected-Finance | SECOND | Rejected-Finance BEING NOT LOWEST | |
| 3 | THIRD₹47.1 LRejected-Finance 26 3 3RD CROSS GANESHA BLOCK SULTANPALYA RT NAGAR POST BANGALORE 560 032 | BANGALORE | BANGALORE | KARNATAKA | 560032 | THIRD | Rejected-Finance BEING NOT LOWEST |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
26 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) MARATHAHALLI
GE AF MARATHAHALLI WIND TUNNEL ROAD, KEMPAPURA, YEMALUR POST, BANGALORE. PIN- 560037
PROVN OF CERTAIN E M AND B R WORKS AT VARIOUS ENTRY AND EXIT POINTS AT ASTE AND OTHER SANCTIONED WORKS UNDER GE AF MARATHAHALLI BANGALORE
2023_MES_597450_1
8619/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) MARATHAHALLI
AS PER ENIT
7 documents required · 7 mandatory
₹500
GE (AF) MARATHAHALLI
₹96,000
Yes
11 Aug 2023
22 May 2023
1 Jul 2023
22 May 2023
26 Jun 2023
8 Jun 2023
Amount
Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.
Demolition concrete in ground floors & paving n exc 15cm thickness(below or above GL) complete all as specified and directed.
Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 m in depth, getting out in hard/dense soil etc., including trimming bottom and sides of trenches, leveling/grading and ramming bottom of excavation complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each in soft/loose soil, complete all as specified and directed.
Removing excavated materials to a distance exc 1.5 KM but n.exc 5 KM and depositing where directed at a level n. exc 1.50 meter above the starting point complete all as specified and directed.
Demolition of brickwork or stone/ boulder masonry, built in cement mortar , incl all quions, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.
Material and labour for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width Type C1 1:3:6 Type C-1 (20 mm graded crushed stone aggregate ) and setting in mortar CM 1:6, complete all as specified and as directed.
M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. Rough finished surfaces of concrete, complete all as specified and directed.
M&L for RCC M-25 design mix as in Beams cantilevers, bressummers, lintels over 1.5m span, etc. complete all as specified and directed.
S & F mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. etc. complete all as specified and directed.
M&L for mild steel TMT bar 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders. cut to length, bend to shape required including cranking, bending spirally for hooping ends and binding with and including MS wire not less than 0.9 mm dia, etc. complete all as specified and directed.
M&L for concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) in foundation, filling, foundations for electric poles and mass concrete complete all as specified and as directed.
M & L for 40mm thick Damp proof course in cement concrete 1:2:4 Type B-0 to horizontal surfaces including necessary form work complete all as specified and directed. (Note : water proofing compound to be measured and paid for separately).
Material and Labour for PCC (1:2:4) type B1 using 20 mm graded stone crushed stone aggregate as in coping, mud stops, benching, water tank platform etc.on roof, chajja weathering, slightly rounded or chamfered angles and throating etc. including necessary form work complete all as specified and directed.
M&L for rendering 10 mm thick cement plaster in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar in 1:4 on fair faces of brick work or concrete surfaces even and smoothe without using extra cement complete all as specified and as directed.
M & L for broken stone or boulders hardcore of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick each, watered and rammed to a true surface complete all as specified and directed.
Material and labour for 100 mm thick PCC 1:4:8, type D2 (using 40mm graded crushed stone aggregate) as in sub base to flooring complete all as specified and directed.
Material and labour for 40mm thick PCC 1:2:4, type B1 (using 20mm graded crushed stone aggregate) as in floors and finished even and rough etc complete all as specified and directed.
M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:4 complete all as specified and directed.
M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, on vertical surfaces such as skirtings, dados and risers to steps etc.. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering on brick work or concrete surfaced wall as backing coat of cement mortar 1:3 complete all as specified and directed.
M&L for Cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggrigate) of 75mm thick as in plinth protection complete all as specified and directed.
Material and labour for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, with pigment etc. jointed and pointed in neat cement slurry in floors over 20mm thick screed bed or bedding layer in cement mortar 1:4 for laying of tiles, complete all as specified and directed.
M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
Supply & Fix machine pressed Pre-cast cement concrete interlocking paver block of approved shape and size confirming to IS 15658-2006 of 80mm thickness M-40 Grade, laid over sand filling/screed bed , set jointed and pointed with grey cement and pigment complete all as specified and as directed.
M & L for providing pre cast cement concrete , 1:2:4 Type B-1(20mm graded crushed stone aggregate) as in Kerb stone with plain fair faces including chamfers, weatherings, throating etc and setting in cement mortar (1:4) complete with joints to match complete all as specified and as directed.
M&L for applying two coats of synthetic enamel paint (ordinary tint) over and including a coat of priming paint on new plaster surfaces of any description over 10cm girth or width complete all as specified and directed.
Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.
Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Structural steel works as roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc conforming to Fe-410-W (Gde-E-250) quality A complete all as specified and directed.
S&F Steel work in tubular trusses including special shaped washer etc. Complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed.
S&F rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment as in gusset plate conforming ot Fe- 410-W-(Gde-E-250) quality A etc complete all as specified and as directed.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.
M&L for preparation of new surfaces of steel and iron surface of any description, not otherwise descriped over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide complete all as specified and as directed.
M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Oil bound distemper over and including a coat of priming on plastered and other surfaces with alkali resistant priming paint including one coat of Birla white putty on plastered surfaces etc. complete all as specified and as directed.
M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Cement Base Paint of approved tint over and including a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified
Removing of building material to a distance exc. 1.50 km but n exc. 5 km/out side the MoD/Unit area and depositing where directed complete all as specified and directed. .
S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
S&F powder coated anodised alluminium door shutters, aluminium sections weighing 0.55 Kg/m including joining cleats glazing clips, rubber neoprene packing , handle 2 Nos in each door, hinges, anodised aluminium snap, mortice lock, beading screws, bearings etc. complete all as specified and as directed by Engr-in-Charge.
S & F Powder coated anodised alluminium window and ventilator shutters sliding type without sash bar, aluminium sections weighing 0.55 Kg/m including joining cleats glazing clips, rubber packing , anodised aluminium snap beading, screws etc. complete all as specified and as directed by Engr-in-Charge.
M&L for Provision of 5.5 mm thick tinted glass exc 0.5 sqm of each pane of superior quality fixed to alluminium frame works with rubber beadings including solar control film of 25 micron reflective type sicked to glass panes as per instructions of manufacturers Complete all as specified and as directed by Engr-in-Charge.
S&F for 12mm thick prelaminated particle board for insulation purpose, fixed to aluminium framework, complete all as directed by Engr-in-Charge.
S&F Floor door stopper 150mm length of cover plate aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in doors complete all as specified and as directed.
S&F in repairs Aluminium Mortice lock of 4 levers in vertical type of size 100 mm complete all as specified and as directed.
S&F Aluminium extruded section body, Door closer hydraulically regulated, deisignation No.3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.
S&F stainless steel wire cloth 0.56 mm nominal dia of wire and avarage width of aparture 1.18 mm and fixed with tinned tacks ro galvanised wire stapple complete all as specified and as directed.
Supply and fix solar control film 25 micron reflective type sticked to glass panes as per instructions of manufactures complete all as specified and as directed.
Taking down unserviceable 3 mtr long pole with post top light complete all as specified and directed.
Taking down carefully unserviceable junction box / MCBs of any type and capacity complete all as directed by EIC.
Taking up underground unservicable cable of any size from existing trench including bricks, etc and removing of materials from work site all as directed by Engr-in-charge.
Excavation in trenches in soft /loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying of cables etc, getting out and forming bottom surface to required gradient complete all as specified and as directed.
Excavating in trenches exceeding 1.5 m wide and not exceeding 3 m depth and not less than 1.5 m in depth for laying of cables & foundation of poles , stay assembly and getting out in any type of soil complete all as specified and directed .
M&L for Removing excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified and as directed.
Supply, laying riddled earth soil conformed IS-1255, cushioning to cables with a layer of riddle earth soil 15cm deep before laying the cable and 8 cm depth after laying of cable complete all as specified and as directed.
Supply and laying for Brick protection cover on cable with sub class 'B' brick, laid dry and flat adjacent to each other complete all as specified and as directed.
M & L for G.I. tubing light grade of size 40mm bore for protection of cables to be laid under roads, crossings/culverts complete all as specified and directed.
Supply and fix steel tubular swaged poles Type 410SP-31(9.0 meter long) Swan Neck Type complete with Cast iron base plate and finial and double swan neck, Including foundation and coping complete all as specified and directed
Supply and fixing pole mounted junction box/bus bar chamber for loop connection of street light cable of size 295x195x100 mm with 63 amps aluminium busbar wrapped with PVC sleeves and maintained the colour code and provision of making holes with suitable clamps , GI nuts, bolts & washers for connections and mounted on hydrograpic insulators with nuts & bolts at both ends of busbar and suitable arrangement for fixing one no MCB complete all as specified and as directed. Make: Sintex , Cat No: GSJB3020 or equivalent model of Hensel/Rittel.
S&F MCB, Single pole, 6 amps, 240 volts, ‘C’ curve, 10 KA all complete as specified and as directed (Make : Legrand/ ABB/Siemens).
Supply and fixing 2.5 Sqmm 3 Core copper conductor cable LT 1100 volt grade Conforming to IS 7098 FRLS (inner sheet) from pole junction box to light fitting with suitable size copper cable lugs and connector all complete as specified and directed. Make : Plaza/Polycab/Havell's.
Supply and fixing of Endura Cityliner Neo, 60 W LED Street Light fitting pressure die cast aluminium housing, heat resistance toughened glass, IP-66 protection complete all as specified and directed. (Make : Bajaj /CG/Philips/Havells
Supply and fixing of Endura Cityliner Neo, 70 W LED Street Light fitting pressure die cast aluminium housing, heat resistance toughened glass, IP-66 protection complete all as specified and directed. (Make : Bajaj /CG/Philips/Havells
Supply, installation, testing and commissioning of outdoor type cubicle panel board suitable for 3 phase 4 wire 415 V, 50 Hz and tested at CPRI for 415 volts factory fabricated in an approved factory having modern fabrication process powder coating in approved shared having thickness not less than 100 microns provided with suitable gasket to make it dust/vermin proof and general construction confirming to IS : 8623/93 comprising. The outer shell shall be made out of 3 mm thick CRCA sheet and MS angle section 40x40x6 mm base frame factory fabricated with front openable, double door system lockable/ open able. The bottom of the outer shell contains a detachable plate having size with glands. The outer shell shall be mounted on stand having zine coating not less than 80 microns. Provision of threaded earthing stud at bottom and lifting lugs of suitable size at top to lift the panel safely shall be made. The degree of protection of outer shell shall be IP - 54. Inner shell shall be made out of 2.0 mm thick CRCA sheet duly compartmentalized for each control gear, TPN aluminum bus bar of rating not less than the 1.5 times the rated capacity of the incomer MCCB. The TPN bus bar shall be insulated with colour coded heat shrinkable sleave. All control wires shall be with 2.5 sqmm multi strand copper conductor and shall be propely bunched, tied, ferruled for proper identification and crimped with adequate size of lugs of suitable length including PCC (1:3:6) type C-2 as in foundation of suitable size (30 cm below ground level & 40 cm above ground level) including necessary excavation and earth work complete all as specified and directed by Engr in charge. (NOTE: Rate of earthwork and PCC are deemed to be inclusive in this item.embedded in PCC foundation of size as required in cement mortar 1:6 and plastering the same in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed ) INCOMING (a) MCCB 4 pole 63 A 25 KA 415 Volts - 1 No (b) Intelligent AC digital display three phase LCD ammeter 0 to 200A and voltmeter 0 to 500V with CT (c) Indication lamp RYB set of 03 -01 No (d) Digital timer switch OUTGOING (a) MCCB 4 pole 32 Amps 16 KA 415 Volt - 2 Nos (b) MCB SPN 32 Amps 10 KA 415 Volt -2 Nos
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core complete all as specified and directed.
M & L for PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in coping of the LT poles including form work complete all as specified and as directed.
Material and labour for boring of holes under road, pavement hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe upto 150 mm dia suitable for 0.4 mpa working pressure complete all as specified and as directed.
M & L for Earthing complete with galvanized iron or steel plate electrode 600 mm x 600 mm x 6.0 mm buried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized iron strip 32 x 6mm dia as earthing lead by means of GI bolts, nuts, check nuts and washers, earth wire protected by galvanized steel pipe 15 mm bore (light grade) connected to machinery/ equipment all as shown in electrical plate No. 5 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore light grade GI pipe for watering funnel wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc., complete all as specified and as directed.
Repairs/ Maint of Roller Gates - 01 Nos (of size 27m x 2.13m (L x H) including by repalcing of all the rail wheels- 16 Nos, electric motor of existing capacity for Electrically operated gate- 04 Nos to cover two space of 54 mtr with four gate of size 27m x 2.13m (L X H), control panels - 01 Nos, replacement of cables approx 60 mtrs as per site requirement of electric cable from Control panel to Roller gate, motors, rails, channels and complete with civil works and one Nos shelters for control panel for protection of rain and made serviceable for smooth movement of gates. The rate quoted shall be deemed include for all works described above and for all connected civil, structural, fabrication , electrical works incl testing complete all as specified and directed by Engineer Incharge. Note- The tenderers are advised to visit the site of work to ascertain the quantum of work and its nature before quoting their rates. The complete work shall be excuted as specified and as directed by Engineer In charge. No claim at later date shall be entertained at later date on this account
m/s raghavendra kulkarni
G K CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .