PROVN OF APPROACH ROAD FOR B VEH REPAIR SECTION FROM WKSP MAIN GATE AT FD WKSP EME BN UNDER GE PANAGARH

Amount

Excavation over areas n.exc 1.5 m deep and getting out in Soft/loose soil, complete all as specified and as directed.

Removing excavated material n. exc 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and as directed.

Rolling and consolidating formation surfaces in filling by power roller exc 8 tones & n exc 12 tone capacity to required gradient and camber, complete as specified and as directed by Engr-in-charge.

M&L for 300mm thick mix of fly ash, clinker & stone dust in the proportion of 1:3:6 (i.e. 10% fly ash, 30% clinker and 60% stone dust) laying in layers n.exc 30cm thick, watering, ramming and compacted with vibratory roller to get min CBR value 8% and dry density 97% placed at required camber and gradient complete all as directed by Engr-in-Charge.

M&L for 150mm thick Soling (or sub base) of well burnt soling bricks including filling of interstices and rolling ,complete all as specified and as directed.

M&L for 150mm thick (compacted thickness) WBM, in two layers of each 75mm thick with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required, complete all as specified and as directed.

M&L for Preparing Unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc ,complete all as specified and as directed.

M&L for Applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 sq metre, complete all as specified and as directed.

M&L for Applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sq metre, complete all as specified and as directed.

M&L for Preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, complete all as specified and as directed.

M&L for Premix bituminous macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) laid with mechanical paver,complete all as specified and as directed.

M&L for applying 25mm thick mastic asphalt consisting of an intermate homogeneous mixture on mineral filler, well graded fine and coarse aggregate industrial grade 85/25 bitumen as per IS 73 of 2006 cooked at 170 degree to 200 degree centigrade laid hot trowelled and floated by means of wooden float bitumen mastic after spreading and while still hot in plastic condition shall spread over with bituminous precoated fine aggregate of size 20mm @ 0.005 Cum per 10 Sqm mixed with 0.17 Kg per Sqm of industrial bitumen grade 85/25 for antistaciding including all material, labour, tools and plants, complete all as specified and as directed.

M&L for 100mm thick Moorum/Red bajri spread, rolled and consolidated to gradient and camber required, complete all as specified and as directed.

M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction, complete all as specified and as directed.

Supply and fix cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructionsas per manufactures instructions etc, complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil, complete all as specified and as directed.

M&L for moorum filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete all as specified & as directed

M&L for PCC 1:3:6, D2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete, complete all as specified and as directed.

M&L for hardcore of broken stone or boulder of gauge exc 63mm but n.exc 75 mm deposited, spread & leveled in lyers n.exc 15 cm thick watered & rammed to a true surface, complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified & directed

M&L for Brickwork built in CM 1:4 with Old size fly ash bricks, straight or curved on plan exc 6m mean radius, complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc, complete all as specified & as directed

M&L for PCC 1:3:6 type C1 as in lintels / beam upto 1.5m clear span, and other similar bands, copings, kneelers, apex stones, bed plates, kerbs and haunching/ benching, water troughs and the like including weathering, slightly rounded or chamfered ang, complete all as specified & as directed

M&L for RCC 1:2:4 type B1 using 20mm stone aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar art set including necessary formwork in CM 1:6 , complete all as specified and as directed.

M&L for Reinforced concrete pipes, class NP2, laid and jointed complete with collars 600mm dia, complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) on wall surface and finishing even and fair, complete all as specified and as directed.

M/S FM Enterprise

UNITED BUILDERS