Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹19.9 L
EMD Value
₹39,832
Closing Date
31 May 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Aerospace Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Bangalore Complex Aerospace Division
Modification of Existing Open shed and Oil stores for Gaganyan kit marshal and finished parts store at Aerospace Division HAL BC
7518
HAL/ASD/NIT-276A/24-25
Works
Bangalore Complex - Aerospace Division
₹0
₹39,832
31 May 2024
16 May 2024
16 May 2024
31 May 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
PAN No.:
Contact details
Please Enter Contact person Name
Pls Enter Mobile No
Cost of tender document (DD no, Date, amount)
Earnest Money Deposit (Number, Date, Amount)
Registered Contractor
Not Enclosed
Average annual financial turn over during the last 3 years, ending 31st March 2023 [ should be at least 30% of the approx. estimated amount put to tender]
TURN OVER IN Rs.
Enclosed
Enclosed
Enclosed
ESI & PF Nos with proof
Related Document to be Uploaded to eProcurement Portal
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission.(solvency required will be 40% of the approx. estimated amount put to tender)
Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs
Electrical license
Experience of having successfully completed similar works during last 7 years ending last day of April-2024. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the approx. estimated amount put to tender. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the approx. estimated amount put to tender. (iii) ONE similar completed work costing not less than the amount equal to 80% of the approx. estimated amount put to tender.
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Please enter Details for Work No 1
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No II
work done
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No III
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to eProcurement Portal
Pls Enter Details for Person holding Power of Attorney
DECLARATION I
DECLARATION II
Pls Accept the Delaration II
HAL/ASD/NIT-276A/24-25 HAL/ASD/CF-276A/24-25
Modification of Existing Open shed and Oil stores for Gaganyan kit marshal & finished parts store at Aerospace Division HAL(BC)
Specification
Demolition of brick work built in CM, of any description and at any height including disposing the debris out side HAL etc., complete all as directed by EIC/ OIC..
Demolition of cement concrete including tiles of any description and at any height including disposing the debris inside division etc., complete all as directed by EIC/ OIC.
Removing/ transporting the mixed debris, excavated earth, dismantled concrete, boulders and unserviceable wastes (branches & roots) including loading & unloading to the landfills authorized by BBMP including paying necessary charges etc., complete as directed by EIC/ OIC.
Taking out / removing carefully the existing Asbestos Cement Sheet roofing of any description at any height with required scaffolding and shifting & stacking the removed materials etc., complete as directed by EIC/ OIC.
Supplying , mixing and placing in position CC (1:2:4) using 20 mm gga of required thickness including scaffolding at any height, compaction, curing, formwork, finishing the exposed surface of concrete an even surface without using extra cement etc., all complete as directed by EIC/ OIC.
Brick work with TMB built in CM (1:6) at all levels for 230 mm thick walls including scaffolding at any height, for superstructure including raking out joints 10mm deep scaffolding, curing etc., all complete as directed by the EIC/ OIC.
Supplying, mixing and placing in position at all levels consolidated and cured as specified controlled grade RCC M-20 with 20mm graded granite aggregate for sub items mentioned below including consolidation, curing, hacking the surface to secure plastering where required, all complete as directed by EIC/ OIC. (Design to be be got approved by HAL before execution / Design mix and RMC supplier shall be approved by Quality of Council of India and using HAL brand of Cement. (Formwork and Reinforcement Shall be paid under relevants items).
For Foundations, including rafts, footings, foundation beams, plinth beam, basement slab, etc.,
Form work by providing timber, wooden planks, runners/ M.S. sheets with all supports, struts, braces, wedges, scaffolds, bracing, ladders, gangways, dressing with oil including M.S.bolts nuts and washers, temporary openings filleting for a stop, chamfered edges, internal/external splayed, rounded angles or grooves for forming throating including removing the same from the site after completion of work, etc., complete all as directed for column footing, pedestal, plinth beam, etc., all as directed by EIC/ OIC. (Form work material contractors own property and shall be removed after completion of work)
Supplying and fixing in position factory insulated sandwich panel min 80mm thick for roofing and cladding, with facings made up of pre-painted galvalume, not less than 0.45mm thick on top and 0.40mm on the bottom with min 550Mpa yield strength. The core material shall be made up of rigid polyurethane foam (PUF) conforming to IS 12436 and of density around 40 + 2kg/m3 fixed with self tapping screws including necessary supplementary fittings, joint fillers, joint laps, making provision for accessories such as ridges, flashings, necessary cutouts / openings, supports for joinery as required etc., all complete as per manufacturer's specification
Supplying, fabricating and fixing Aluminium - glazed Three track sliding windows with powder coated anodized aluminium sections of high grade alloy approved make manufacturer comprising of the following: a) 18mm shutter with top, bottom and side sections thickness & width to be around 1.29mm & 40mm respectively. b) The bottom section of the frame shall be around (92x45.5 to 38x1.50)mm weighing . c) The top and side frame including the handle side and the interlock side shall be around (92x31.75x1.50)mm to accomodate shutter section of around [40x18x1.29]mm all round. The shutters are to be provided with 4.5mm thick plain glass for two shutters and stainless steel fly proof shutter for one shutter fixed with good quality tapered aluminium interlocking screwless snap on type glazing clip including all fittings like handles, locking arrangements, EPDM gasket with all necessary scaffolding, tools as per approved drawings, etc., all complete as directed by EIC/OIC .
Supplying, fabricating and fixing IInd class hard wood frame work/chowkats for Doors of size approximtely [100 x 60]mm as per detail drawings, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints fixed to wall, including cost of all materials, labour, wastage, etc., all complete as directed by EIC/OIC.
Supplying, fabricating and fixing to chowkat 30mm thick flush shutter, solid core (with block board) with one side decorative veneered and other side commercial type facing and internal wood lipping of 25mm thick, including all fittings such as MS heavy weight butt hinges - 125mm long,4 Lever CP mortice lock of 100mm size ,Brass barrel tower bolt of extruded section - 200mm long,MS hold fasts [25 x 3 x 400]mm long, Extruded brass handles polished facricated type - 150mm long, Door closure hydraulically operated designation No. 3, universal type powder coated aluminium extruded section body for door shutter,Powder coated aluminum body Floor door stopper of overall length - 150mm etc., all complete as directed by the EIC/OIC.
Steel reinforcement for R.C.C work using Hot Rolled deformed bars including straightening, cutting, bending, placing in position and binding all complete upto plinth level
Supplying,fabricating and fixing in position MS Stanchions using MS Structuals such as ISSHS/ISRHS/ ISMB/ISA/ISMC etc., as per drawing for trusses, purlins at any height including required scaffolding for base plates, stiffners, bolts, including necessary cutting, welding, aligninment of bolts Etc., complete.
Supplying and fixing louvered / fixed type powder quoted aluminium ventilator with 4.5mm thick plain glass without sash bar with necessary anodized aluminium snap beadings, joining cleats, screws, self locking glazing clips, neoprene rubber gasket, etc., all complete as directed by EIC/ OIC.
CM (1:6) 15mm thick plastering over old brick & concrete surfaces of wall / roof slab at any height along with all necessary scaffolding,staging including preparation of surface, lime rendering for internal areas etc. Complete.
Supplying and laying double charge vitrified tiles for flooring of approved design, colour & manufacturer of size (600 x 600 x 10)mm or suitable size as approved, over and with a screed of CM (1:4) min. 20mm thick to a required level & gradient, joints set and pointed with coloured cement to match with that of tiles, curing,etc., complete as directed by EIC/ OIC.
Supplying and laying mat/ glossy finished 1st quality ceramic tiles for wall dadooing of approved design, colour & manufacturer of size 450-600mm x 300mm x 6 mm or suitable size as approved, over and with a screed of cement mortar (1:4) minimum 20mm thick to a required level & gradient, joints set and pointed with coloured cement to match with that of tiles, curing,etc., complete as directed by EIC/ OIC.
Providing and fixing in position of vitreous urinals with sensor unit of Parryware/ Hindware Italian collection of approved model incl. all required fittings such as CP spreaders, CP flange, CP brass screws, washers, etc., incl. cutting & making good the walls and floors wherever required including removing existing CC bedding etc., complete all as per the specification & direction of EIC/ OIC.
Supplying and fixing light coloured glazed wall -Hung EWC of premium make with concealed flush tank, angle cock, pillar cock, paper holder, health facet & all necessary fixture/ fittings water & sanitary connections including removing existing CC bedding etc., complete as directed by EIC/ OIC.
Supplying and fixing premium make vitreous wash basin of approx. size 560mm x 440mm, counter top type of approved colour including 15mm dia premium Pillar cock 15mm dia, CP brass stop cock 15mm dia,, inlet pipe with checknuts, CP coupling & waste connection, etc., complete. with required anchor nut and bolts all as directed by EIC/ OIC.
Supplying and laying 18mm thk Granite slab of ruby red /green / any approved colour of specified size for counter wash hand basins including cutting / making hole for kitchen platform/ seating wash basin of any description, polishing, grinding, chamgering, screed CM (1:4) 20mm thk, etc., complete as directed by EIC/ OIC. (Wash hand basin will be paid separately)
Supplying, fixing 15mm dia nominal bore powder coated brass heavy duty long body bibcock of Jaguar's or equivalent make and fitted to the water pipe line by jointing with the necessary fitting etc., all complete as per specification and direction of EIC/ OIC
Supplying and fixing in position 600mm x 1500mmx 20mm thick jet black granite screen wall for urinals including necessary polishing, rounding of edges, framing etc., complete all as directed by EIC/ OIC.
Supplying and fixing SS Grating 125mm dia with rin set in over floor trap etc., complete as directed by EIC/ OIC.
Supplying, laying, jointing, testing and commissioning approved make UPVC pipes 6 Kg/cm2 with solvent cement joints for kitchen sink, wash basin outlets and anti syphonage pipes including required pipe fittings such as ends, elbows, unions, tees, sockets, plugs etc., complete the quoted rate shall including necessary chasing in walls making good the same in CM 1:4, etc., complete as directed by EIC/ OIC.
a) 20 mm dia,
b) 25 mm dia,
Supplying and fixing approved make of UPVC multi inlet floor trap with 75 mm dia outlet and CP over on top etc., complete with cement concrete support alround the floor trap etc., complete as directed by EIC/ OIC.
Supplying and fixing premium quality long brass CP towel rail of 600 mm with brackets etc., complete as directed by EIC/ OIC.
Supplying and fixing premium quality CP wall mounted Soap dish of approved design & shape including cutting and making good the walls, etc., complete as directed by EIC/ OIC
Supplying and fixing premium quality etched design mirror of approx. size 600mm x 450mm of approved shape & quality glass etc., complete as directed by EIC/ OIC.
Supplying and fixing PVC-SWR (4 Kg/Sq cm) of approved make incl. all fittings like bends/ door bends, tees, supports, jointing with PVC solutions etc., complete as directed by EIC/ OIC.
110 mm dia,
75 mm dia,
63 mm dia,
Providing & applying of 2 coats of synthetic enamel paint on new wood surface of approved colour, brand, shade incl. scaffolding at any height with prepartion of surface etc. complete as directed by the EIC/OIC.
Painting the interior surfaces of walls and ceiling at any height with two coats of plastic emulsion paint of approved shade and manufacture including preparation of previously painted surface by scraping down hardened patches, rubbing down, sand papering, removing greasy spot, stoping holes and crevies to obtain blemish less and dry surface etc., including required scaffolding etc., all complete as directed by EIC/OIC.
Painting over the exterior surfaces of walls, chajjas with two coats of ACE paint of approved brand, colour, shade, tint, pattern including preparation of surface, applying a coat of alkali resistant primer curing at all heights including necessary scaffolding,formwork etc., all complete as directed by the EIC/OIC.
Supplying and application of 4mm thick PU flooring including surface preparation etc all complete
Epoxy topping coat 1mm thick with glossy finish
The tenderer shall quote the rates inclusive of GST and all other taxes, duties, levies, fees and charges or any other imposition by the Central / State Government or any statutory authorities of whatever nature. All other costs including loading, un-loading, Insurance, transportation, testing, Certification expenses. L1 (lowest quote) will be determined based on the total quoted amount inclusive of all taxes and other charges as mentioned above.
Payment will be subject to terms and conditions in the tender document
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TenderNoticeNIT276A.pdf
TENDER_DOCUMENT • 0.10 MB
PQNIT276AVendorToUpload.xlsm
TENDER_DOCUMENT • 0.02 MB
PricebidNIT276AVENDORTOUPLOAD.xlsm
TENDER_DOCUMENT • 0.03 MB
PricebidNIT276AVENDORTOVIEWONLY.pdf
TENDER_DOCUMENT • 0.05 MB
TenderdocumentNIT276A.pdf
TENDER_DOCUMENT • 0.54 MB
AnnexuresforNIT276A.pdf
TENDER_DOCUMENT • 0.12 MB
PQNIT276AVendorToVIEWONLY.pdf
TENDER_DOCUMENT • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .