Construction of Community Center in place of Janjghar near Kangra Welfare Center at Nangal Township

Amount

PART-A (CIVIL WORK) Schedule items

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. (CSR item No. =6.6)

Cement concrete 1:4:8 with stone aggregate 40 mm gauge (ii) mixing by mechanical means using concrete mixer volumetric type. (CSR item No. =10.11(b) (ii))

Shuttering for faces of concrete foundations and foundation beams and plinth beam (vertical or battering). (CSR item No. =9.1)

RCC M-20 mechanically batch mixed using batch type concrete mixture as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in foundation and plinth. (CSR item No. =10.15)

First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth. (CSR item No. =11.3(i))

Damp proof course 4 cm thick of CC 1: 2: 4 with two coats of bitumen 20/30 penetration @ 1.65 kg per sqm laid hot and sanded. (CSR item No. =10.26)

115mm thick brick wall in cement sand mortar 1:4 without reinforcement in superstructure. (CSR item No. =11.36)

First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level. (CSR item No. =11.4(i))

First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 to 6 mtr (CSR item No. =11.4 & 11.29 a)

Centering and shuttering for columns (Square or rectangular or poly gonal in plain) (CSR item No. =9.4)

Centring and shuttring for columns (Squares or Rectangular or poly gonal in plan) in second story (CSR item No. =9.4, 9.15)

Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels in first story (upto 4 mtr height). (CSR item No. =9.6)

Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels in first story (4 to 5 mtr height). (CSR item No. =9.6, 9.16)

Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. in first story (upto 4 mtr height). (CSR item No. =9.8)

Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. in first story ( 4 to 5 mtr height). (CSR item No. =9.8, 9.16)

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. (CSR item No. =10.20)

RCC- M-20 mechanically batch mixed using batch type concrete mixture as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in superstructure in 1st story ( 4 mtr to 5 mtr height). (CSR item No. =10.20, 10.49)

RCC- M-20 mechanically batch mixed using batch type concrete mixture as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in superstructure in 2nd story (CSR item No. =10.20, 10.48)

Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete (CSR item No. =18.18)

Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4.0 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. (CSR item No. =13.74)

Providing and fixing 110 mm dia U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer-in-charge (a) upvc 110mm bend (CSR item No. =13.75 (a))

Providing & fixing in position MS or heavy flat iron clamps made out of MS flat iron of the approved design for fixing UPVC pipes to walls compete in all respects (MR)

Plastering on underside of ceiling 10 mm thick cement plaster 1:4 (CSR item No. =15.44)

Plastering on underside of ceiling 10 mm thick cement plaster 1:4 (4 mtr to 6 mtr.) (CSR item No. =15.44)

Plastering on underside of ceiling 10 mm thick cement plaster 1:4(6 mtr to 8 mtr.) (CSR item No. =15.44)

Plastering on walls 6 mm thick cement plaster 1:4 ( 0 to 4 mtr) (CSR item No. =15.3)

Plastering on walls 6 mm thick cement plaster 1:4 (4 mtr to 6 mtr.) (CSR item No. =15.3, 15.85)

12.5 mm thick cement plaster 1:6 (CSR item No. =15.11)

12.5 mm thick cement plaster 1:6 (4 mtr to 6 mtr.) (CSR item No. =15.11, 15.85)

12.5 mm thick cement plaster 1:6(6 mtr to 8 mtr.) (CSR item No. =15.11, 15.85)

20mm thick cement plaster 1:6 in two coats work (CSR item No. =15.28)

20mm thick cement plaster 1:6 in two coats work (4 mtr to 6 mtr.) (CSR item No. =15.28, 15.85)

20mm thick cement plaster 1:6 in two coats work (6 mtr to 8 mtr.) (CSR item No. =15.28, 15.85)

Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material (CSR item No. =14.3)

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete white cement slurry in joints including corners angles and beading. (CSR item No. =14.72)

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. (Design is homogenous throughout the tile body). a)Size 600x600 mm (CSR item No. =14.113 (a))

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/ Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (CSR item No. =14.127)

Kota stone slab 20-25 mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) (CSR item No. =14.84)

Kotah stone tiles 20mm thick in skirting risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing. (CSR item No. =14.86)

Providing and laying Polished Granite stone 18 mm thick flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. (CSR item No. =14.89 (b))

Cement Concrete 1:2:4 (a) With stone ballast or shingle mixing by mechanically means using concrete mixer volumetric type. (CSR item No. =10.13 (ii))

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections conforming to Is:733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In- Charge. (Glazing and panelling to be paid for separately) a) For fixed portion and chaukhats (CSR item No. =17.45 (a))

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections conforming to Is:733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In- Charge. (Glazing and panelling to be paid for separately) (b)For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required (CSR item No. =17.45 (b))

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic items) ii) Float glass panes of 5mm thickness (CSR item No. =17.47(i))

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides. (CSR item No. =17.46 (ii))

Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete A) 250 mm x 16mm (CSR item No. =17.49-B)

Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless, stopper and screw etc. for these fittings (Excluding sliding bolt) (ii) For shutter area above 0.50 sqm (CSR item No. =17.23 (ii))

Providing and fixing 26/12 gauge SS wire mesh (NS)

Providing & fixing 16 gauge stainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia Stainless steel pipe, Balusters of 40mm dia Stainless steel pipe and guard 3 Nos of 15mm dia Stainless Steel pipe complete in all respect. (CSR item No. =18.39)

Dismantling brick work tile masonary or tile lining. B) in cement (CSR item No. =8.5 (b))

Scraping of bricks dismantled from bricks works in lime or cement (CSR item No. =8.31 (e))

Carriage of Bricks lead 1 km including loading & unloading. (CSR item No. =5.2 (vi) & 4.3)

Carriage of Bricks Bats lead 1 km including loading & unloading. (CSR item No. =5.2 (i) & 4.3)

PART-B (WATER SUPPLY)

Excavation manually in trenches with straight or open cutting in built up street/lane having wall to wall width of straight/ lane upto 30.0 meter, for intramural sullage drains, extramural intercepting drains and outfall drains, storm water channels and other work contingent or incident thereto , to full dimensions and depth as shown on the drawings or as shall be required by engineer- in – charge including dressing to correct sections and dimensions according to templates and levels, dewatering of rain water, diversion of traffic, providing and fixing and maintenance of caution boards, fencing, night signals, for leads upto 15 m and for all the lifts and subsequent refilling, watering and dressing upto ground level, including removal of surplus spoil from the site upto 15meter distance complete in all respect a) For Ordinary gravel soil having gravel upto 40% (CSR item No. =29.1 A (ii))

Cement concrete 1:5:10 (b) with stone aggregate 40 mm gauge (ii) mixing by mechanical means using concrete mixer volumetric type (CSR item No. =10.9 (b) (ii))

Providing, lowering, cutting & jointing salt glazed stone ware pipes and specials ISI marked as per IS: 651-2007 class 5p-1 into trenches for all depths and laying out the same to correct alignment, gradients, levels etc. cutting of concrete beds joints holes, supporting the pipes and specials in correct position in a suitable rigid manner while the same are being jointed and until the supporting benching, hunching and envelopes are completed including jointing of pipes and specials in trenches, using cement sand mortar 1:1 and best spun jute yarn as per IS:1887, finishing and trowelling of each joint at an angle of 45 degree with the longitudinal axes of pipe watering, keeping the joint covered and wetted till the same are curd testing the sewerage line of leakage and defects good as laid in the contract specification and chipping and finish the cut surface to uniform finish to the entire satisfaction of engineer-in-charge Including all cartage etc complete in all respects. b) 150mm i/d pipe (CSR item No. =29.41 (b))

Providing and fixing in position single socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. (B) Single Socket Type B (b) 110mm o/d SWR UPVC pipe lines laid complete (CSR item No. =30.74 (iii) B (b))

Providing and fixing in position single socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. (B) Single Socket Type B d) 90mm o/d SWR UPVC pipe lines laid complete (CSR item No. =30.74 (iii) B (c))

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. for 110 mm o/d pipe (i) vent Cowls (CSR item No. =30.81 (iii) B (vi))

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. for 110 mm o/d pipe ii) Coupler (CSR item No. =30.81 (i) (B) (viii))

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. for 110 mm o/d pipe iii) Elbow 90 Degree (All side socketed) (CSR item No. =30.81 (iii) B (v))

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. for 110 mm o/d pipe iv ) P Trap/Floor Trap 110mm x 75mm (CSR item No. =30.81 (iii) B (x))

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. (b) for 90 mm o/d pipe i) Door elbow 90 degree (all side socket) (CSR item No. =30.81 (iii) (c) (Iv))

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. ii) Coupler (CSR item No. =30.81 (iii) (c) (viii))

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. iii) Elbow 90 Degree (CSR item No. =30.81 (iii) (c) (v))

Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm. (b) 100mm internal Diametre H.C.I. gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm (CSR item No. =30.99 (b))

Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge) (b) 110mm o/d (CSR item No. =30.77 (C) (b))

Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge) (C) 90 mm o/d (CSR item No. =30.77 C (c))

Cutting holes upto 23 cm square through B.B. in cement walls or stone masonry wall in cement for pipes, and making good the same & finishing according to existing finish where required.(L/R) b) Through wall 22.86 cm thick (CSR item No. =28.56 (b) )

Providing and fixing in position M.S. or heavy flat iron clamps made out of M.S. flat iron of the approved design for fixing SWR UPVC, vent or antisyphonage pipes to walls complete in all respect. Including cutting and making good the walls and floors etc. and painting.(a) M.S. holder bats clamps for 110 mm o/d SWR UPVC pipes (MR)

Providing, laying, jointing , fixing and testing ISI marked G.I. pipe (as per IS 1239) B-class premium make such (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.) painting with anti-corrosive bitumastic paint, testing, cutting, threading inside building complete . (a) 15 mm i/d (CSR item No. =28.35 (a))

Providing, laying, jointing , fixing and testing ISI marked G.I. pipe (as per IS 1239) B-class premium make such (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.) painting with anti-corrosive bitumastic paint, testing, cutting, threading inside building complete . (b) 20 mm i/d (CSR item No. =28.35 (b))

Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I. pipes line and making good the same to its original condition. a) Size 75mmx75mm (CSR item No. =30.85 (a))

Providing and fixing malleable iron holder bats (MR)

Providing, laying, jointing , fixing and testing ISI marked G.I. pipe ( IS 1239) B-class premium make such (Jindal Hisar) including cost of specials such as tees, bends, sockets, elbows etc. cutting, threading and testing in trenches in the ground complete (a) 20 mm i/d (CSR item No. =28.36 (b))

Providing and placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer-in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and base support for tank. i) Triple layer Tanks (CSR item No. =30.97-A (i))

Providing and fixing in position automatic brass ball cock in tanks. b) Brass Ball cock with rod and Plastic i) 15 mm i/d (CSR item No. =30.96 (b) (i))

Providing and placing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC water storage tanks complete in all respect. a) G.I. tank nipple 15mm i/d (CSR item No. =30.98 (a))

Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. pipe lines including all carriages complete. a) 20 mm i/d Brass Ball valves (CSR item No. =28.44 (b) )

Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick, grade-304 (18/8) with waste coupling complete in all respect. (b) Rectangular Sink with Deluxe Border Single Bowl Overall Size 555 mm x 475mm x 200 mm (CSR item No. =30.47 (b))

Providing & fixing 15mm i/dia bib cock of approved make to the approval of the EIC complete in all respect. iv) Brass Bib cock/Stop cock 15mm x 400gm (CSR item No. =30.65 A (iv))

Providing and fixing in position stop cock/ Angle valve of approved make ( to the approval of Engineer-in-charge) complete in all respect (f) PTMT 15mm Concealed stop cock with flange. (CSR item No. =30.66 (f))

Providing and fixing in position stop cock/ Angle valve of approved make ( to the approval of Engineer-in-charge) complete in all respect (g) PTMT 15mm Angle valve (CSR item No. =30.66 (g))

Providing, fixing and jointing G.I. Union couplings (of approval make with the approval EIC) as per IS 1879 in G.I. pipe lines complete in all respect. a) 15 mm i/d G.I Union (CSR item No. =28.40 (a))

Providing, fixing and jointing G.I. Union couplings (of approval make with the approval EIC) as per IS 1879 in G.I. pipe lines complete in all respect. (b) 20 mm i/d G.I Union (CSR item No. =28.40 (b))

Providing ISI Marked G.M ferrule as per IS:2692, drilling and tapping cast iron pipe lines of all diametres and screwing in Ferrule and connections complete in all respect. (c) 20mm i/d Ferrule medium (CSR item No. =28.34 (c))

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. ii) Size 550 mm x 400 mm x 815 mm (CSR item No. =30.32 (ii))

Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect. i) Vitreous chinaware standard white pedestal for wash hand basin. (CSR item No. =30.43 (i))

Providing and fixing PVC waste pipe collapsiable 32mm complete in all respect. (CSR item No. =30.20)

Providing and fixing in position chinaware Indian Orissa water closet size 580mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 Letter. PVC flushing cistern including cost of PVC long bend 32mm die complete in all respect and to the entire satisfaction of Engineer-in-charge. (CSR item No. =30.2)

Providing and fixing in position chinaware European type water closet with P trap or S trap size of approved make (to the approval of the Engineer-in-charge) consisting of 10 Letter. PVC flushing cistern, PVC short bend 32mm die including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. (CSR item No. =30.4)

Providing and fixing jet spray with 2’-6” long PVC pipe. a) With C.P brass nut (CSR item No. =30.8(a))

Providing and fixing in position PVC flexible tube connection of approved make ( to the approval of Engineer-in-charge) complete in all resprct. ( c) PVC tube connection of size 15mmx450mm with C.P. Brass nut. (CSR item No. =30.72(b))

Providing and fixing in position C.P brass, bottle trap 32mm die 40mm seal of approved make (to the approval of Engineer-in-charge) complete in all respect. (CSR item No. =30.44)

Providing & fixing in position vitreous Chinware white Indian make flat back or angular lipped front small urinals size 265x315x440mm approved make (to the approval of the Engineer-in-charge) with C.P. brass tube connection 300 mm long complete in all respect. (CSR item No. =30.15)

(a) Extra for providing and fixing G.I. 32mm waste pipe for urinal including elbow, reducer etc complete in all respect. (CSR item No. =30.19 (a))

Vitreous white chinaware partition (i) Small partition size 69x16.5x32.5 cm (CSR item No. =30.21(B) (i))

Providing and fixing in position vitreous chinaware white channel of approved make ( to the approval of Engineer-in-charge) of size 600mmx100mm including laying and fixing in cement concrete 1:2:4 complete in all respect. (CSR item No. =30.100)

Providing and fixing in position C.P. copper tube connection of approved make ( to the approval of Engineer-in-charge) complete in all respect. ( c ) C.P. copper tube connection of size 15mmx450mm with C.P. brass nut (CSR item No. =30.73 (c ))

Providing and fixing in position C.P. brass overhead shower 1 flow with shower arm without 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect. (CSR item No. =30.56 A)

Providing and fixing in position towel rail/ ring of approved make (to the approval of Engineer-in-charge) fixed in with crawl plugs embedded in walls with brass screws complete in all respect. (b) C.P. towel ring (CSR item No. =30.58(b))

Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge) fixed into wall with rawl plugs and C.P. brass screws complete in all respect. (CSR item No. =30.60)

Providing and fixing in position 5mm thick beveled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with crawl plugs 50mm, C.P. brass screws and washer and S/S studs on top complete in all respect (as required by the Engineer-in-charge) (a) Size 600mmx450mm (CSR item No. =30.61(a))

Providing and fixing in position S.S. grating with frame of approved make ( to the approval of Engineer-in-charge) complete in all respect. (CSR item No. =30.80)

Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 (150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design. a) Size 450mm x 450mm inside with RCC 455mm x 455mm cover and frame light duty double seal (CSR item No. =29.60 (a))

Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 (150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design. (b) Size 450mm x 600mm inside with RCC 455mm x610mm cover and frame light duty double seal (CSR item No. =29.60 (b))

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floor with cement concrete 1:2:4 mix (1 cement :2 concrete sand : 4 : graded stone aggregate 20mm nominal size) cement plastered on both side with cement mortar 1:2 (1cement : 2 coarse sand ) finished with a floating coat of neat cement and making necessary channals for the drain etc. complete. (a) For pipes 100 to 250mm Diameter (CSR item No. =29.65 (a))

PART-C (ELECTRICAL ITEMS )

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- a) Wiring fan point (With fan box) (CSR item No. =34.02 (i) (a))

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- b) Wiring light point (CSR item No. =34.02(ii))

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- C) Wiring call-bell point (CSR item No. =34.02 (iii) )

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- d) Wiring 3 pin 6 Amp. wall socket (CSR item No. =34.02 (iv))

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- f) Wiring 3 pin 16/20 amp. power plug control point (CSR item No. =34.02(vi))

PVC INSULATED SINGLE CORE FRLS COPPER CONDUCTOR CABLE:- Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- (ii) Overall size 1.5sq.mm (Un-sheathed) (CSR item No. =34.09 (ii))

PVC INSULATED SINGLE CORE FRLS COPPER CONDUCTOR CABLE:- Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- (iii) Overall size 2.5sq.mm (Un-sheathed) (CSR item No. =34.09 (iii))

PVC INSULATED SINGLE CORE FRLS COPPER CONDUCTOR CABLE:- Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- (iv) Overall size 4sq.mm (Un-sheathed) (CSR item No. =34.09 (iv))

XLPE/ PVC INSULATED UN-ARMOURED CABLES (ON SURFACE):Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:- (xxxvii) Overall size 16sq.mm (4 Core) Unarmoured (On-Surface) (CSR item No. =34.10 C (xxxvii))

COPPER EARTHING: 8 SWG COPPER EARTHING : Earthing with 8 SWG (4mm dia.) electrolytic copper wire thimbled (1No. copper thimble with suitable size steel bolt, washers & double nut) with 30cm x 60cm x 2mm thick copper plate (made cylindrical) burried below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) recessed in wall and in floor etc., up to suitable Length in metre (including bore Length). G.I. pipe 20mm dia. (A-class) of suitable Length should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-(a) Earthing with 8 SWG (4mm dia.) copper wire thimbled with 30cm x 60cm x 2mm thick copper plate burried 4.50 metre (14.76 feet) below ground level (up to 8metre in Length) with G.I. pipe 20mm dia. (A-class), 3metre long (CSR item No. =34.14 (i) a)

Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers / RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-TP&N Horizontal Double Door Distribution Board 8 way each (CSR item No. =34.17 (vii))

SHEET METAL IRON CLAD SWITCHES: Supply and erection of sheet metal Iron Clad Switches on existing surface with G.I. bolts & nuts/ rag bolts and nuts etc., according to the size of holes in the body of the enclosure including connections with suitable size of thimbles and bonding to the existing earth as Per PWD General Specifications:- (vii) ICTPN Switch 100amp., 415volts (CSR item No. =34.18 (vii))

MINIATURE CIRCUIT BREAKERS/ RCBO's/ RCCB's: MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- (ii) MCB Single Pole 6-32amp. (10kA, Curve-C) (CSR item No. =34.16 A (ii))

PVC, HDPE PIPES & PVC FLEXIBLE PIPES:-Supply & erection of PVC pipes & HDPE pipes (fire retardant) for wiring purposes including bends, inspection boxes etc., where necessary including other petty material as per PWD General Specifications 2010:- Heavy gauge PVC conduit pipe 25mm dia. (ISI marked 2mm thick) Heavy Gauge PVC Conduit Pipe 25mm dia. (On Surface) (CSR item No. =34.12 (ii))

Bidder Name

Amount in Words

SUBASH CHAND

SUDHIR ANAND

SUNIL DUTTA

SUDHIR ANAND

SUBASH CHAND