Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.0 LAccepted-AOC | ₹25.0 L | L1 | Accepted-AOC Accepted being L1 bidder |
| 2 | L2₹27.1 LRejected-Finance FLAT NO A 102 ASHOKVAN RAJSHIV CO OP HSG SOC SHIV VALLABH ROAD DAHISAR EAST MUMBAI 400 068 | MUMBAI SUBURBAN | MAHARASHTRA | 400068 | ₹27.1 L | L2 | Rejected-Finance Being L2 bidder |
| 3 | L3₹29.4 LRejected-Finance 309 VINAYAK TOWER CUTTACK PURI ROAD BHUBANESWAR 751 006 | KHORDHA | ODISHA | 751006 | ₹29.4 L | L3 | Rejected-Finance Being L3 bidder |
| 4 | L4₹30.5 LRejected-Finance PLOT NO 8 5179 SAILASHREE VIHAR CHANDRASEKHARPUR BHUBANESWAR DIST KHURDA ODISHA 751 021 | KHORDHA | ODISHA | 751021 | ₹30.5 L | L4 | Rejected-Finance Being L4 bidder |
| 5 | L5₹31.2 LRejected-Finance | ₹31.2 L | L5 | Rejected-Finance Being L5 bidder |
| Sl No | Description | Qty | Unit | Rekha Enterprises L1 | EAST URBAN ENGINEERING L5 | Shree Mahavir Associates L3 | Bob Enterprises L2 | SHREE ENTERPRISES L6 | SMART ENERGY SOLUTIONS L4 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00M&L for maintenance/servecing of the following centrifugal/ monoblock/slip ring/ submersible pumpset by dismentling & opening of strip, overhauing , cleaning using emery paper/sand paper & cotton waste, greasing, oiling, tightning of nut & bolts of the base frame, rubber packing, gland packing & replacement of old unserviceable spare parts if required etc and refixing , re-assembling, re- alignment & testing complete all as specified and directed. Note:- Transporation charge, all spare parts (any type) suitable for pumpsets turning and lathe work, welding work, for repair to wrokshop deemed to be included in the quoted rate. | |||||||||
| 1.01 | 125/120 HP Centrifugal pumpsets | 2 | Each Job | 5,000 ₹10,000 | 9,000 ₹18,000 | 14,555 ₹29,110 | 11,000 ₹22,000 | 14,500 ₹29,000 | 6,000 ₹12,000 |
| 1.02 | 80/100 HP Centrifugal/slip ring pumpsets | 4 | Each Job | 5,000 ₹20,000 | 8,000 ₹32,000 | 12,444 ₹49,776 | 10,000 ₹40,000 | 10,500 ₹42,000 | 5,900 ₹23,600 |
| 1.03 | 60 HP Centrifugal/slip ring pumpsets | 1 | Each Job | 12,500 ₹12,500 | 6,000 ₹6,000 | 8,765 ₹8,765 | 9,000 ₹9,000 | 9,500 ₹9,500 | 5,700 ₹5,700 |
| 1.04 | 30 HP Centrifugal/slip ring pumpsets | 1 | Each Job | 12,000 ₹12,000 | 6,000 ₹6,000 | 6,789 ₹6,789 | 9,000 ₹9,000 | 8,500 ₹8,500 | 5,300 ₹5,300 |
| 1.05 | 20/25/30 HP submersible pumpsets | 5 | Each Job | 2,500 ₹12,500 | 4,000 ₹20,000 | 5,677 ₹28,385 | 8,500 ₹42,500 | 9,500 ₹47,500 | 4,800 ₹24,000 |
| 1.06 | 5/7.5 HP submersible pumpsets | 4 | Each Job | 2,000 ₹8,000 | 3,500 ₹14,000 | 5,555 ₹22,220 | 6,000 ₹24,000 | 7,500 ₹30,000 | 3,900 ₹15,600 |
| 1.07 | 1 HP submersible pumpsets | 1 | Each Job | 3,000 ₹3,000 | 3,500 ₹3,500 | 4,000 ₹4,000 | 3,500 ₹3,500 | 6,500 ₹6,500 | 1,950 ₹1,950 |
| 2.00M&L for repair/replacement of burnt out carbon brush suitable for following slipring motor as per sample etc complete all as specified and directed:- | |||||||||
| 2.01 | 80/100 HP slipring motor | 9 | Each Job | 450 ₹4,050 | 1,000 ₹9,000 | 544 ₹4,896 | 1,000 ₹9,000 | 1,400 ₹12,600 | 1,200 ₹10,800 |
Updated dates
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
26 Dec 2025, 6:00 pmClosed
Shri Himanshu IDSE EE
GE (I)(CG) Bhubaneswar, Military Engineer Services, Near School Integral Education, Campus-2, Coast Guard Complex, Pallaspalli, Bhubaneswar-751 020 (Odisha)
REPAIR REPLACEMENT OF PUMP SET STARTER PANEL CLEANING OF WATER SUMPS WATER STORAGE TANKS AND ALLIED WORKS AT ARC CHARBATIA
2025_MES_741715_1
8629/BBSR/04/E8
Open Tender
Miscellaneous Works
270 days
CHARBATIA
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (I) (CG) Bhubaneswar
₹80,000
Yes
20 Feb 2026
27 Nov 2025
29 Dec 2025
27 Nov 2025
26 Dec 2025
12 Dec 2025
Amount
125/120 HP Centrifugal pumpsets
80/100 HP Centrifugal/slip ring pumpsets
60 HP Centrifugal/slip ring pumpsets
30 HP Centrifugal/slip ring pumpsets
20/25/30 HP submersible pumpsets
5/7.5 HP submersible pumpsets
1 HP submersible pumpsets
M&L for repair/replacement of burnt out carbon brush suitable for following slipring motor as per sample etc complete all as specified and directed:-
80/100 HP slipring motor
60 HP slipring motor
30 HP slipring motor
M&L for repair/replacement of burnt out carbon brush copper Holder suitable for following slipring motor as per sample etc & using sand paper & grinder for slipring complete all as specified and directed:-
80/100 HP slipring motor
60 HP slipring motor
30 HP slipring motor
Supply & fix in repalcement copper lugs 95 sqmm heavy duty complete all as specified and directed.
125 /100 HP squarrel cage induction motor starter panel
80/100 HP slipring motor starter panel
60 HP slipring motor starter panel
30 HP slipring motor starter panel
20 HP submersible motor starter panel
25 HP submersible motor starter panel
30 HP submersible motor starter panel
7.5 HP submersible motor starter panel
5 HP Submersible motor starter panel
1 HP submersible motor starter panel
M&L for lifting & lowering of pumpsets along with removing it from its position along with pipes and fittings carefully with the help of required T&P carefully of following capacity :-
20/25/30 HP submersible pumpsets
5/7.5 HP submersible pumpsets
1 HP submersible pumpsets
Supply & Fix in repalcement thermal overload relay (Auto/mannual reset) of range 111 Amp to 185 Amp suitable for the following capacity motor starter panel as per sample complete all as specified and directed.
125/120/100 HP Squiral cage induction motor
30 to 60 HP motor starter
Supply & Fix in repalcement analog Ammeter of range 0-200 Amps suitable for motor starter panel as per sample complete all as specified and directed.
Supply & Fix in repalcement analog Voltmeter meter of range 0-500 Volts suitable for motor starter panel as per sample complete all as specified and directed.
Supply & Fix in repalcement Start/Stop push button green/red suitable for motor starter panel as per sample complete all as specified and directed.
M&L for disconnecting and removing the existing defective Centrifugal motor/slip ring motor from the installed position and shifting to workshop and removing the burnt out winding and re-winding the same with super enamelled copper wire of same gauge and same number of turns of existing specifications, insulating winding with existing class of insulation varnishing baking up including replacement of base foundation nuts, bolts, wornout parts such as bearings, shaft sleeves, oil seal / gland rope, rubber packing / coupling greasing etc., and re-installation of pump, testing to satisfactory performance complete all as specified and directed. (Note : shifting to workshop and back to its original position sre included in the item rate)
125 HP motor
100 HP motor
80 HP motor
60 HP motor
30 HP motor
Disconnecting the delivery pipe line and electric connections of submersible pump set of capacity of 5.0 to 7.5 HP and lifting and removing it from deep borewell of any depth along with pipes and fittings carefully with the help of required T&P and transporting the same to the work shop for repair / servicing and rewinding with super enamelled copper conductor of same gauge and same number of turns as that of existing including tightning the winding and connecting the coils , including necessary bearing, terminals and other unserviceable parts and bringing the connections as that of existing complete lowering and refixing the same in its original position including connecting up of water and electric connections including testing and commissioning complete all as specified and directed.
All as per item no 13.00 above but for 20/25/30 HP submerseable/openwel pump motor.
M & L for Periodically changed of insulating motor starter oil for replacement of oil in oil immersed Star delta starter 3 phase for 30 HP,60 HP , 100 HP starter complete all as specified and directed.
Supply and fixing in replacement CI coupling set flanged type with rubber insertition and suitable bolts of 125/120 HP centrifugal pump, complete all as specified and directed.
Supply and fixing in replacement CI coupling set flanged type with rubber insertition and suitable bolts of 100 HP centrifugal pump, complete all as specified and directed.
Supply and fixing in replacement Ball bearing for pump/ motor 125/120 HP, complete all as specified and directed.
Supply and fixing in replacement Ball bearing for pump/ motor 100/80 HP, complete all as specified and directed.
Supply and fixing in replacement Ball bearing for pump/ motor 60 HP, complete all as specified and directed.
Supply and fixing in replacement Ball bearing for pump/ motor 30 HP, complete all as specified and directed.
Supply and fixing in replacement Casing ring for 30 to 60 HP Centrifugal pumps complete all as specified and directed.
Supply and fixing in replacement Casing ring for 80 to 125 HP Centrifugal pumps complete all as specified and directed.
Supply and fixing in replacement CI gland plate with high tension studs for 30 to 60HP Centrifugal pumps complete all as specified and directed.
Supply and fixing in replacement CI gland plate with high tension studs for 100 to 125HP Centrifugal pumps complete all as specified and directed.
Supply and fixing in replacement rubber bush coupling for 30 to 60 HP Centrifugal pumpset complete all as specified and directed.
Supply and fixing in replacement rubber bush coupling for 80 to 125 HP Centrifugal pumpset complete all as specified and directed.
S & F in replacement MS Flexible Jaw Coupling joint Type SW type / or coupling as on site with necessary foundry work for 30 to 60 HP pump set including taking out worn out coupling set by dismantling complete pump and motor from base foundation, re-assembling the motor complete all as specified and directed.
All as per item no 27.00 above but for 80/100 to 125 HP motor pump set.
M&L for turning, polishing ,repairing and filling of Impeller complete suitable for following capacity of pump sets :-
125 HP Pumpsets
100 HP Pumpsets
80 HP Pumpsets
60 HP Pumpsets
30 HP Pumpsets
M&L for turning and polishing and necessary filling of pump shafts suitable for following capacity of pumpsets complete all as specified and directed :-
125 HP Pumpsets
100 HP Pumpsets
80 HP Pumpsets
60 HP Pumpsets
30 HP Pumpsets
Material & Labour for covered drain cleaning including removing of covers & taking out all the silt/mud/debris from the drains of minimum width 50 cm to 80 cm complete all as specified and directed.
Supply & fix in replacement Analog water pressure gauge of 100 mm size pressure range 0-17.5 Kg/cm2 of stainless steel complete all as specified and directed.
Supply & fix in replacement single phase preventor suitable for slip ring motor starter panel complete all as specified and directed.
Supply and fixing gland packing 12mm/14mm/16mm suitable for pumpset 30HP/60HP/80HP/100HP/ 125HP complete all as specified and directed.
Labour only for site clearance/surface cleaning by removing of hurbs/shurbs/wild vegetation/removing surpus soil to a distance n exc 50 mtr and making good surface of the E/M installations area & water supply network area with suitable T&P complete all as specified and directed. Note:- All T&P will be provided by the contractor without any extra cost and also not to cut any tree/plants during the execution of works.
Cleaning and removing all scales and deposited materials in Under ground water sump/OHT of following capacity by applying bleaching powder , brushes for removing deposited materials, including cleaning to sourrounding area including draining out existing water using dewatering pump complete all as specified and directed. Note :- The cost of coir rope, bleaching powder, brush for removing scales & cleaning the surrounding area near tank and dumping the mud outside the premises & writting date of cleaning, tank capacity shall be deemed to include in the above item rate. Note 2: The contracor is deemed to have visited the site and ascertain the requirement & jobs required for tank/channel
UG Sump /Fire VATS 40000 Ltrs (Approx)
Semi UG circular flocculator tank 550000 Ltrs(Approx)
Rectangular UG Sedimentation tank 170000 Ltrs(Approx)
Rectangular UG Sedimentation tank 90000 Ltrs(Approx)
Airation Channel (of 1.5 MGD filteration plant)
Airation Channel (of 0.5 MGD filteration plant)
Semi UG circular storage tank 4 lakh gallon Ltrs(Approx)
Servicing of sluice valves cast iron body by greasing/oiling using T&P as required as per manufacturer’s instructions & providing gland rope of superior quality to stop any leakage of sluice valves including replacement of defective check nuts complete all as specified and directed.
100-150mm dia
200-250mm dia
300- 450mm dia
Material & Labour for Shifting of existing serviceable Foot valve of 300mm/250mm/ 200mm bore from the pipeline & fixing the same in existing intake water line with necessary Gasket, Nuts & bolts as per site requirment from mahanadi river including necessary tools & plants complete all as specified and directed.
Supply & mixing Stable Bleaching powder conforming to IS specifications 1065 (Part -2)/2019 Grade 1, minimum available chlorine percentage lay by mass 34% + 1% in 25 Kg polythene HDPE bags duly marked date of manufacturing and batch No complete all as specified and directed.
Supply & mixing alumina ferric (Grade-IV) suitable for purification of drinking water in the form of solid lumps/slabs from the manufacturer having valid BIS certificate as specified in table 1 of IS: 299-2012 ammendment No 01 Feb 2015 complete all as specified and directed.
Supply & mixing hydrated lime suitable for water treatment complete all as specified and directed.
Supply and fixing in replacement of bush of following capacity of pump sets including trnasportation and all accessories complete all as specified and directed.
125 HP Pumpsets
100 HP Pumpsets
80 HP Pumpsets
60 HP Pumpsets
30 HP Pumpsets
Supply and fixing in replacement submersible copper conductor cable 10 sqmm 3 core complete all as specified and directed.
M&L for repairing of thrust housing including lathe work and its accessoires complete all as specified and directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundations, taking down/ laying of cables/ pipes or for shafts, wells, cesspits, manholes, pier holes, etc. and not exceeding 10 Sqm on plan and getting out in hard / dense soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed.
Removing excavated material (spoil) at a distance not exceeding 50m and depositing where directed at a level n. exc. 1.50 m above the starting point complete all as specified and directed.
Supply and fixing GI tubing ,medium grade of following dia pipe with all fitting, laid in trenches, or fixed to walls with clamps, floors, ceiling etc. of the following bore complete all as specified and directed.
50 mm bore size
80 mm bore size
100 mm bore size
Supply and fixing in replacement of oil imersed starter complete including all accessories suitable for 81 HP to 100 HP slip ring motor complete all as specified and directed.
Supply and fixing in replacement of oil imersed starter complete including all accessories suitable for 101 HP to 125 HP slip ring motor complete all as specified and directed.
Bob Enterprises (BID ID -3502468)
Shree Mahavir Associates (BID ID -3502780)
SMART ENERGY SOLUTIONS (BID ID -3502986)
EAST URBAN ENGINEERING (BID ID -3502745)
SHREE ENTERPRISES (BID ID -3502792)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.73 MB
BOQ_830548.xls
BOQ • 1.97 MB
TENDER.pdf
Tender Documents • 1.21 MB
Download all tender documents and submit your bid