Construction of section office building with cash Collection centre for Sivathapuram and Nethimedu Rural O and M Section offices (GF and FF) at 110/22 KV SS at Kandhampatti.

Amount

Clearing Juliflora jungle with uprooting as directed by the Engineer at site including lead, lift,etc.,complete.

Earthwork excavation and depositing on bank with initial lead of 10m and lift of 2m in all soils including cost of all materials, T&P 's, leads, lifts, etc., complete.

Ordinary soil 20%

Hard gravelly soil 50%

Soft disintegrated rock 20%

Supplying and filling the M sand for filling in the foundation and basement including cost of sand, filling charges (watering & consolidation) with all leads, lifts as per standard specification etc., complete.

Plain cement concrete in CC 1:4:8, using 40mm HBG metal including cost of cement, all materials, labour charges including consolidation, curing, all leads, lifts, as per standard specification etc., complete.

Plain Cement Concrete 1:3:6 using 40 mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specification and as directed by the departmental officers.

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Column for basement and ground floor including cost of cement, all materials, labour, curing, vibration charges, with shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Column for first floor including cost of cement, all materials, labour, curing, vibration charges, with shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Raft beams including cost of cement, all materials, labour, curing, vibration charges, with shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Retaining Wall including cost of cement, all materials, labour, curing, vibration charges, with shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for plinth beams including cost of cement, all materials, labour, curing, vibration charges, with shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Refilling using the site excavated earth in foundation and basement or wherever necessary in 150mm thick layers, well rammed including filling charges (watering & consolidation) with all leads, lifts as per standard specification etc., complete.

Filling the around low laying area alround in section office building outside and raising basement using the gravel in 150mm thick layers, well rammed including filling charges as per standard specification (watering & consolidation) with all leads, lifts etc., complete.

Providing Anti-termite treatment to soil adjacent and under building foundation, plinth periphery of the building by application of chemicals of IS 63613 part I to IV in stages to suit the progress of work consist as per the detailed specification as below. Including breaking of termite mounds, making holes with crow bar, closing the holes after the treatment and including cost of chemicals, labour charges, transport and storing etc., complete and as directed by the departmental officers.

Brick work in CM 1:5 using class II bricks for super structure and septic tank, including cost of all materials, labour charges, curing scaffolding charges, curing all leads and lifts etc., complete and as directed by Engineer.

Brick work in CM 1:5 using class II bricks for super structure for first floor including cost of all materials, labour charges, curing, scaffolding charges, curing all leads and lifts etc., complete and as directed by Engineer.

Brick work in CM 1:3 using class II bricks for partition wall and others including cost of all materials, labour charges, curing, scaffolding charges, curing all leads and lifts etc., complete and as directed by Engineer - Ground Floor

Brick work in CM 1:3 using class II bricks for partition wall and others including cost of all materials, labour charges, curing, scaffolding charges, curing all leads and lifts etc., complete and as directed by Engineer - First Floor

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Lintel beams in ground floor including cost of cement, all materials, labour, curing, vibration charges, with shuttering, all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Lintel beams in first floor including cost of cement, all materials, labour, curing, vibration charges, with shuttering, all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Sunshades of 600 mm in ground floor with 80 mm thick at wall and 50 mm thick at free end including cost of cement, all materials, labour, curing, including shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Sunshades in first floor of 600 mm with 80 mm thick at wall and 50 mm thick at free end including cost of cement, all materials, labour, curing, including shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Lofts (75mm tk) in Ground Floor including cost of cement, all materials, labour, curing, vibration charges, with shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Lofts (75mm tk) in First Floor including cost of cement, all materials, labour, curing, vibration charges, with shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Roof beams for Ground floor including cost of cement, all materials, labour, curing, vibration charges, with shuttering, all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Roof beams for first floor including cost of cement, all materials, labour, curing, vibration charges, with shuttering, all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for ground floor Roof slab including cost of cement, all materials, labour, curing, vibration charges, including shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for First floor roof slab including cost of cement, all materials, labour, curing, vibration charges, including shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Providing Steel reinforcement MS/RTS rods for reinforced concrete works, including cost of steel MS/RTS rods, binding wire, labour charges for cutting, straightening bending as per type design drawing, placing aligning, and tying properly with all leads and lift as per standard specification, etc., complete.

Wall Plastering 1:5, 12 mm thick on both sides of country brick wall after electrical piping work including the cost of all material, scaffolding charges, cement, labour charges, all leads, lifts, as per standard specification.

Ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers.

Plastering with Cement Mortar 1:3, 20mm thick including finsihing, curing, etc., complete complying with standard specification and as directed by the departmental officers.(For Septic Tank)

White washing two coats for Ceiling with approved quality of White cement including cost of all materials, labour, leads & lifts and as directed by Engineer at site.

Painting the Outer wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface etc., complete complying with standard specification.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg./ sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Supplying and fixing of FRP Door frame made out of country wood of size 100mmx75mm and Flush shutter of 30mm thick including cost of necessary fittings,Labour Charges for put up for doors in position etc.,complete.

Supplying and fixing UPVC (Un -Plasticised polyvinyl chloride) windows of casement type (open) from the profile the size of outer frame 60mm x58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm EPDM rubber (block colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should have key lockable action, security protective hinges strong locking systems and as per size for arresting noise and energy loss.The connecting mechanism between sash and outer frame that enables opening of the window.The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The window should be got approved from the executive engineer before use on work, including cost of all materials, labour and power required for fabrications, chipping dismantling making holes in RCC, masonry and made good to the original condition after fixing,etc., complete.

Supplying, fabricating and fixing UPVC (Un-plasticized polyvinyl chloride) louvered ventilator of from the profile the size of outer frame 60mm x 58mm and shutter profile of size of 60mm x 78mm both profile are reinforced with GI/1mm 125GSM and 100% corrosion free,the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour)coverd with all over the edges of frame and shutter. The corners and joints should be welded and cleaned, Radiations pin headed glass 4mm thick should be provided in the louvers.The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the EE before use on work, including cost of all materials, labour and power required for fabrications, chipping dismantling making holes in RCC, masonry and made good to the original condition after fixing ,etc., complete.

Supplying and fixing window Grill using MS Square Rod of required size including cost of all materials labour charges for fabrication and fixing lead and lift etc., complete.

Supplying and fixing white glazed earthen ware water closet colour of size 20" with flushing cistern of approved quality with 'P' and 'S' Trap embedded the closet with trap to shape in position with brick jelly concrete 32:12:5 using 40mm hard broken brick jelly finishing the top to required shape etc., including cost of all materials, labour, lead, lift, etc., complete as per standard specification.

Supplying & fixing in position of European water closet with 'P' and 'S' Trap with double flapped seat and seat cover with brass hinges and 10 litre capacity PVC low level flushing tank with all internal fittings & accessories including cost of all materials,transporting,leads and lift etc., complete as per standard specification.

Supplying and fixing white glazed earthen ware Hand wash basin of size 550x400mm reputed make with cast iron brackets, 32mm CP waste coupling rubber plugged chain 15mm GM wheel valve, Nylon hose connection, materials, and mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, Procelain CP soap tray of size 150 x 150mm and with hard board backing and aluminium anodised towel rail 600mm long and 20mm dia with brackets of same materials of approved colour fixed with brass screws, rawl plug, etc., lead, lift, transporting, labour charges etc., complete as per standard specification.

Supplying and fixing locking arrangements with lock 7 levers with 3 keys Godrej Navthal or any other approved good quality lock of reputed make including cost of all materials, labour, lead, lift, etc., complete as per standard specification.

Supplying and fixing in position SS Heavy duty long body tap 15mm of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

Providing PVC pipe of ISI make including cost of bend, Elbow and shoe, including cost of all materials, labour, lead, lift, as per standard specification etc., complete (110mm dia PVC Pipe-6kg/cm2)

Providing PVC pipe of ISI make including cost of bend, Elbow and shoe, including cost of all materials, labour, lead, lift, as per standard specification etc., complete (75mm dia PVC Pipe-6kg/ cm2)

Providing PVC pipe of ISI make including cost of bend, Elbow and shoe, including cost of all materials, labour, lead, lift, as per standard specification etc., complete (40mm dia PVC Pipe-10kg-/ cm2)

Providing PVC pipe of ISI make including cost of bend, Elbow and shoe, including cost of all materials, labour, lead, lift, as per standard specification etc., complete (Providing 32 mm dia water line pipe-10kg/cm2:)

Providing and fixing Air ventilating shaft of PVC pipe 110 mm dia of 6 kg /cm2 ISI make including cost of bend, Elbow and shoe, including cost of all materials, labour, lead, lift, as per standard specification etc., complete

Supplying and fixing 110 mm dia PVC Door Tee of 6 kg /cm2 ISI make including cost of bend, Elbow and shoe, including cost of all materials, labour, lead, lift, as per standard specification etc., complete

Supplying and fixing in position first quality and approved variety of 40 mm Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

Wiring with 2x1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires with TW switch box and 5A F.T. switch in flush with wall with 3mm thick hylum sheet cover for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (For electronic regulator).

Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and celling with PVC accessories in flush with wall with suitable flush type TW switch box to hose the control switch and regulator, and covered with 3 mm Thick Hylem sheet with continuous earth wire connection of 14 SWG TC wire making good of the concealed portion with suitable colour for concealed fan point (For rheostatic type fan regulator).

Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3 mm thick Hylem sheet cover for 5 A 3 pin non inter locking CS Plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point.

Wiring with 2x4 sqmm(56/0.3) PVC insulated SC unsheathed Cu.Conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for 15 A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire , and making good of the concealed portion, with suitable colour for concealed power plug point.

Supply and fixing 20W LED tube light Fitting Philips make or equivalent type on wall or ceiling.

Supply and fixing of 9W LED water tight bulk head fitting suitable suitable for lamb with guard heavey type ISI make lead &lift etc complete.

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300w regulater with 600mm down rod on the existing clamp.

SGST For bidders within Tamilnadu

CGST For Bidders within Tamilnadu

IGST For Bidders outside of Tamilnadu

P Sivaguru

NVS and Co

vetrivel constructions