Repair and maintenance of Type-5 quarter at R.B. Road campus of ICAR-CISH, Lucknow

Amount

Sub Heading 1

Earth work in excavation by mechanical means(Hydraulic excavator/manual means) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5 m, DSR[2.6.1]

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering: 1:2:4 (1 cement: 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources. DSR[4.1.3]

Providing and laying reinforced cement concrete work in walls, including attached pillasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc plinth level: 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone) DSR[5.2.2]

Providing and laying reinforced cement concrete work in beams, suspended floor, roofs having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3(1 cement: 1.5 coarse sand zone-III derived from natural resoureces : 3 graded stone aggregate 20 mm nominal size derived from natural resources. DSR[

Centering and shuttering including strutting , propping etc and removal of form for foundation, footings, bases of columns etc for mass concrete

Providing centering and shuttering including strutting , propping etc and removal of form for column, pillars, piers, abutments, posts and struts

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position. DSR[10.1]

Brick work with common burnt clay F.P.S.( non-modular) bricks of class designation 7.5 in superstructure above plinth level upto floor five level in all shapes and sizes : Cement mortar 1:4 (1 cement: 4 coarse sand)

Providing and fixing wash basin with C.I. brackets, 15mm dia C.P. brass single hole basin mixer of approved quality and make(cera/parryware/hindware/somany), 32mm CP brass waste of standard pattern, including paintings of fittings and brackets, cutting and making good the walls wherever require: White vitreous china wash basin size 630x450mm with a pair of 15mm CP brass single hole basin mixer.DSR[17.7A]

Providing and fixing toilet paper holder:C.P. brass DSR[17.34.1]

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing of white vitreous china cistern with dual flushing fitting of flushing capacity 3lt/6ltr (adjustable to 4ltr/8ltr) including seat cover and cistern fittings nuts bolts and gasket etc. complete[17.78]

Providing and fixing GI inlet connection for flush pipe connecting with WC .DSR[17.22]

Providing and fixing CP brass 32mm size bottle trap of approved quality and make and as per the direction if engineer. DSR[17.22A]

providing and fixing cpvc pipe for drainage and connection to main line chamber

Providing and fixing 50mm water inlet from main water source to all the fittings

Providing and fixing CP brass angle valves for toilet seat and for wash basin

Providing and fixing CP brass bib cock

Providing and installing toughened glass heavy duty glass at the railing in the balcony with SS 304 high grade steel of 18 gauge in the railing.

Providing and laying vitrified floor tiles of size 600x600 of desired shape and size and of desired color as required and jointing with cement slurry and grouting the tile with matching pigment color grouting powder.DSR[11.41.2]

Dismantling of flushing cistern of all types(C.I./PVC/Vitrious china) including stacking of useful material near the site and disposal of unserviceable materials within 50m lead DSR[15.52]

Dismantling floor tiles of washrooms,kitchen laid in cement mortar and cleaning the surface for base formation and for laying of tiles including disposal of rubbish to the dumping ground within 50m lead.DSR[15.23]

Providing and laying rectified glazed ceramic floor tiles of size 300x300mm (thickness to be specified by the manufacturer) of 1st quality confirming to IS:15622 of approved make in all colours and shades required, laid on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including pointing the joints with white cement and matching pigments etc complete. DSR[11.40]

Finishing with deluxe multi surface paint system for interiors and exterior using primer as per manufacturers specifications: Two or more coats applied on walls @1.25 ltr/10sqm over and including one coat of special primer [email protected]/10sqm DSR[13.48.1]

Finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: New work two or more coats applied @1.43 ltr/10sqm over and including priming coat of exterior primer [email protected] kg/10sqm)approved brands asian/berger/deluxe. DSR[13.47]

Providing cement plaster in coarse sand of 12mm thickness cement plaster mix in the ratio of 1:4 (1 cement :4 coarse sand) DSR[13.4.1]

Providing and fixing 12mm thick one side prelaminated particle board(decorative lamination on one side and other sides balancing lamination) grade 1, medium density flat pressed, three layer particle board FPT-1 or graded wood particle board FPT-1 conforming to IS:3087 bonded with BWP type synthetic resin adhesive. DSR[9.6.3]

Providing and fixing ISI marked flush door shutters conforming to ISI:2202 part 1 non decorative type , core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30mm thick including ISI marked stainless steel butt hinges with necessary screws. DSR[9.21]

Enamel paint DSR[13.99]

Waterproofing/grading DSR[22.6]

Putty work DSR[13.80]

Supply and fixing 8 modules, GI box along with modular base and cover plate for modular switches in recess etc as rrquired DSR[1.27.5] E&M

Supply and installation of 18W LED batten complete tubelight

Supply and fixing of Conduit pipes along with accessories in surface including painting in case of surface conduit or cutting the wall and making good the wall and making good the same in case of recessed DSR[1.21.2]

Wiring for light point /fan point/exhaust fan/ point/call bell point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface with modular switches and modular plate suitable GI box with earthing the point with 1.5 sq mm FRLS pvc insulated copper conductor as required, Group B. DSR[1.3.2]

Supply and fixing 3 modules, GI box along with modular base and cover plate for modular switches in recess etc as required. Socket 16 A 3 pin shuttered socket. DSR[1.27.2]

Wiring for light/power plug with 4x4 sqmm FRLS PVC insulated copper conductor single core cable in surface recessed steel conduit alongwith 2nos 4sq mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. DSR[1.6]

Supply and installation of exhaust fan.

GST as applicable

M/s Deepak Singh Contractor

SHRI PRATAP SINGH