SPECIAL REPAIRS TO COMPOUND WALL AND CERTAIN BUILDING AT ERANGAL UNDER INS TRATA

Amount

SCH 'A' PART I (B/R WORK) Demolition of brick work or stone/boulder masonry, built in cement mortar, including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work & precast concrete articles including copings etc.and removing debris outside MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.

Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron fixed at top etc complete all as spcified and directed

M& L for walling of random rubble masonry uncoursed well bonded and built in cement mortar 1:6 complete all as specified and directed .

Ditto all as per item No 3.00 above but with old stone masonry (Except stone ) including all labour for dressing the stones to the required size and shape complete all as specified and directed

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints in random rubble walling, uncoursed with maximum depression 40 mm on face from straight edge of granite or trap stone of face bed & joints as specified of random rubble walling uncoursed or brought up to course complete all as specified and directed .

Racking out joints / pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in cement mortar complete all as specified and directed

M&L for raised pointing to random rubble or polygonal rubble uncoursed masonry in cm 1: 4 complete all as specified and directed .

M&L for Providing precast cement concrete 1:2:4 Type B-1 (using 20 mm graded aggregate ) in window or door cills, lintels,bressumers, steps,quoin blocks (for use with ma sonry), string courses, copings.kneelers, apex stones, pier caps,columns, posts,boundary pillars,bed plates, pintle blocks, anchorage blocks, bonders (for stone walling) corbels, brackets,etc. (of any section indicated), with plain fair faces,including chamfers, weatherings,throating etc. and setting in cement mortar 1:6 including necessary form work complete with joints to match complete all as specified and directed

M&L for broken glass coping on top of wall in cement mortar (1:3), 20 thick rendering with rounded or weathered finish and before mortar has set, glass (of bottle or thick glass) broken to approximate 63 mm gauge firmly embedded @ 10 Kg glass per sqm of rendered surface complete as specified in SSR Part-I.

M&L for preparing new steel surfaces of any description n.exc 60 cm in girth including holder bolts, distance pieces etc. (length measured over bends, branches etc) and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed

S&F MS angle iron as in posts or struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire etc. including all necessory drilling, bolting or riveting etc.conforming to Fe-290 grade E-165 and embedding post in concrete complete all as specified and directed.

S&F MS framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings etc conforming to Fe 410-0 or Fe 310-0 complete all as specified

S&F in repairs Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed (each line wire to be measured)

S&F in repairs of razer type concertina coil , 9 SWG hot galvanied spring tensile wire 145 to 150 newton per square mm , zinc coating 250-300 gram per sqm dia of coil when unstretched 610mm minimum no of coil 10 per RM affter laying hot dip galvanised razer ribbon tape of size 0.50mm thick 19mm wide before wrapping of central corewise fixed with 1.66mm thk GI clips 25 nos per running meter and special nut bolt hold Z coil together and extra two rows parallel wire of 10 gauge complete all as specified and directed by EIC and dismantling of razer type concertina coil with two parallel rows of wire remove of the debris out side MD land complete all as specified and directed by EIC

S&F mild steel screw bolts (machine made ) with hexagonal or square heads at one end screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square hut exceeding 5 cm long and diameter of neck 5 to 10 mm complete all as specified and directed

M&L for rough excavation n exc 1.5m deep and getting out in hard/ dense soil complete all as specified.

Removing excavated soil n. exc. 50 mtr and depositing where directed at a level n. exc. 1.5 mtr above the starting point complete all as specified and directed

M&L for hardcore of gauge n.exc 0.63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface of a broken stone or boulders complete all as specified and directed.

M&L for chequered cement concrete tile 30CM x 30CM x 25mm thick with grey cement and pigment set, jointed and pointed in neat cement slurry in floors laid over and including cement mortar bedding 20mm thick in CM 1:4 complete all as specified and directed..

M&L for machine pressed precast cement concrete factory made glazed kerb stone of size 500x150x300 mm using PCC (1:2:4) type B 0 (using 12.5 mm graded stone agreegate) , jointed in CM 1:4 including necessary excavation and and earthwork in any type of soil and removing surplus soil outside MD land complete all as specified as directed

M&L for Sand filling under interlocking tiles including watering and consolidation complete all as specified and as directed.

M&L for interlocking Machine pressed cement concrete factory made paver block With Grey Cement and pigment any shape and size confirming to IS 15658 -2006 of 80mm thickness, M-40 Grade, pattern and colour as approved complete all as specified and directed.

M &L for 100 mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed

Demolition of reinforced concrete in any position, manhole covers etc and removal of the demolished material outside MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.

Demolition of cement concrete unreinforced of any type any level and at any position and removal of the demolished material outside MD land complete all as specified and directed Note: The place of disposal shall be find out by the contractor.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including similar pattern roof covering complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises. Note: The place of disposal shall be find out by the contractor.

Taking up or down steel tubing 15mm bore of pipe and connections etc as required complete all as specified and directed..

Ditto all as per item No 28.00 above but 20mm bore pipe complete all as specified and directed..

Ditto all as peritem No 28.00 above but 25mm bore pipe complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land. Note: The place of disposal shall be find out by the contractor.

Taking down chowkhats or frames (without taking off shutters from the frame) n exc 1.5 Sqm each complete all as specified and directed.

Dismantling PVC water tanks of capacity 500 ltr & n exc 1000 ltrs and removing to store safely of all retrieved material

Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

Add to item 34.00 above but for each additional 1.5m or part thereof in depth beyond the first 1.5 m and getting out in hard/dense soil complete all as specified and directed.

Returning filling in, including, spreading, levelling, watering and well ramming in layers n. exc. 25 cm

Removing excavated material n. exc. 50 mtr and depositing where directed at a level n. exc. 1.5 mtr above the starting point complete all as specified and directed

M&L for PCC 1:4:8 type D2 (40 mm graded aggregate ) in foundations, filling and mass concrete complete all as specified and directed.

M&L for RCC 1 : 2 : 4 type B1 (nominal mix) (using 20mm graded stone aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns,UG sump etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L RCC 1:2:4 type B1 (nominal mix) (using 20mm graded stone aggregate) in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for RCC 1:2:4 type B1 (nominal mix) (using 20mm graded stone aggregate) in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as pecified and directed..

M&L RCC 1 : 1.5 : 3 type A1 (using 20mm graded stone aggregate) in beams, cantilevers, ressummers, lintels over 1.5m span complete all as specified and directed.

M&L for TMT bars 10mm dia & over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Ditto all as per item No. 43.00 above but for stirrups, spacers and binders.complete all as specified and directed.

M&L form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter flat for rough finished surface of concrete complete all as specified and directed.

M&L form work to sides of pillars, posts, structs, piers, columns and stanchions square, rectangular or polygonal for rough finished surfaces of concrete complete all as specified and directed.

M&L form work for soffit and sides of floor or roof beams, beam haunchings, girders, ressummers, linterls, camtilevers, shelves flat items including edges for rough lintels finished surface of concrete flat complete all as specified and directed.

M&L for form work to edge of concrete flats exceeding 10cm but not exc 20cm wide for rough finished surface of concrete flat complete all as specified and directed.

M&L for rendering 5mm thick in (1:3) on fair faces of ceiling and finishing surface even and smooth without using extra cement complete all as specified and directed.

M&L ror rendering 20mm thick on fair faces of brick work or concrete surfaces in CM 1 : 4 mixed with WPC @ 3 % by the weight of cement used and finishing surface even and smooth without using extra cement complete all as specified and directed..

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1 : 6 and finishing surface even and smooth without using extra cement complete all as specified and directed..

M&L for three coats of white wash over new plastered ceiling surface in cluding preparation complete all as specified and directed.

M&L for Preparation of new surfaces of wall and applying two coats of 100% anti fungal acrylic emulsion paint over one coat of acrylic primer and over a coat of water proof of dulux or equivalent etc, all as per manufacturer instruction including necessary scaffoldings and safety arrangement complete all as specified and directed

M&L for three coats of white wash on new surface of wall including preparation of surface complete all as specified and directed.

M&L for preparing newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of primer and 1mm thick wall care putty complete all as specified and directed.

M&L for preparation of old surface of wall and applying one coat of white wash complete all as specified and directed.

M & L for preparation of old plastered surfaces of walls including rubbing down and stopping of distemper and painted surfaces and treating oil and greasing spots and applying one coat of oil bound distemper over a coat of putty complete all as specified and directed

M&L for preparation of old plastered or un plastered surface of walls, cornices etc by brooming down or steel wire brushing scrapping down smoke soot , moulds moss and efflorescent salts and trading oil and greasy spots including all necessary scaffolding and applying two coats of cement base paint (white or tinted ) complete all as specified and directed.

Supply only liquid water proofing compound.

M&L for APP modified membrane water proofing treatment to parapet wall surface with following specification and with approved applicater of manufacturer- (a) Applying oil bound bitumen primer @0.40 lit / Sqm of density 0.87 - 0.89 Kg/lit of 25 0 C after preparation of surface. (b) Supply and lay APP water proofing membrane reinforced with non woven polyster matt laid using butane torch by torch on application with a side lap of 10cm and 15cm end lap weighing not less than 3.6 kg/sqm. (c) Applying one coat of solar reflective bituminous paint all as per manufactures's instruction complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1 :4 complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW grade st-240 induction butt welded tubes conforming to IS 1161-1979

M&L rolled sections as in framing for cladding, vertical post, glazing and the like fixed with angle cleats and connecting plates etc conforming to Fe 410-W (Gde-E-250) complete all as specified and directed

M&L roof trusses (framed) trussed, purlins, crange gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E-250) complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc (150micron) coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc(150 micron) coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified.

M&L for non-skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed or bedding layer 15mm thick in CM 1:4.complete all as specified.

M & L for non skid coloured ceramic tiles 7 to 8mm thick joint free (square / rectangular) area of each tile exceeding 0.11 sqm but not excceeding 0. 18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed or bedding layer 15mm thick in CM 1:4.complete all as specified.

M&L for glazed ceramic jointless coloured tiles in vertical surface 350x250x7mm / 450 x 350 x 7mm set and jointed in neat cement paste laid over and including backing coat 10mm thick in CM 1 : 3 complete all as specified and directed.

M&L for 20-22 mm thick Granite of any colour in single piece (table rubbed and polished) as in windows cill , in steps, jambs, pillars, cooking platforms and like in cement mortar (1:4) including form work , pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as spd as directed

S&F sink with drainage board made of stainless steel 1mm thick kitchen with plugs, washers and wasters , including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410 mm x 330 mm x 160 mm and fixed complete all as specified and directed.

S&F in repairs bib tap brass 15mm bore dia chromium plated with long shank fancy type with curtch or butterfly handle , screwed down, screwed for iron pipes complete all as specified and directed.

S&F in repairs connector PVC 450mm long complete all as specified and directed.

S&F in repairs Rotational moulded polyethylene water storage tanks (Cylindrical verticval with closed top) hoisted & fixed in position of 2000 ltrs capacity complete all as specified

S&F in repairs 25mm dia Ball valve high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed.

M&L Rotational moulded polyethylene water storage tanks (Cylindrical verticval with closed top) hoisted & fixed in position of 500 ltrs capacity complete all as specified and directed..

S&F Nipple suitable for HDPE water tank (minimum weight 25mm - 65 gms) 25mm bore dia complete all as specified and directed

S&F Nipple suitable for HDPE water tank (minimum weight 25mm - 65 gms) 20mm bore dia complete all as specified and directed

S&F in repairs Gate valve 25mm bore cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified.

S&F in repairs Gate valve 20mm bore cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified.

S&F 25 mm bore GI tubing medium grade with all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc fixed to walls and ceilings or laid in floors with suitable size GI clamps complete all as specified.

Ditto- all as per item No. 83.00 above but 15mm bore dia complete all as specified and directed.

Ditto - all as per item No. 83.00 above but 20mm bore dia complete all as specified and directed.

M&L for solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube and fixing in opening as per specification complete all as specified and directed.

M&L for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specifications complete all as specified and directed.

S&F extruded Powder coated aluminium section as in window, ventilation,door (powder coated 50 micron in blackcolour) with movable, openable or fixed type shutter or any pattern as directed, aluminium section medium weight of series B or size as directed by the Engr in charge cut to size , jointed toghter including providing rubber beading and all necessary fitting complete all as specfied and directed. Note :- (i) Only aluminium sections shall be measured and paid in this item. (ii) Rate quoted by the contractor shall deemed to be inclusive of all neecssary fittings and fixture such as roller,handle,locks etc (iii) Glass pane and XPM jali will be measured and paid seperatly.

S & F aluminium grill conforming to DG- 102 of Deco Grill or equivalent , (10mm X 5.2mm) thick of approved design or equivalent as approved and fixing with and including 'F/U' channel not less than 1.5mm thick complete all as specified and directed.

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

S&F stainless steel butt hinges medium weight 100mm long.

S&F aluminium anodised barrel tower bolts of extruded section 150mm long.

S&F extruded aluminium alloy handles, fabricated type, anodised 150mm size.

S&F in repairs vitreous china wash down water closet pan (padestal pattern), white including matching plastic sheet cover, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium anodized hinging device and connection to trap and to flushing pipe, anti syphonic pipe etc., complete all as specified and directed.

S&F in repairs.vitreous China squatting pan, 'orrisa' pattern wc of size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe but including 'P' or 'S' trap and provision of lime concrete bedding complete all as specified and directed. Note:- flushing cistern and flush pipe will be measured and paid under supply only rate.

Supply only WC connector 110 mm PVC SWR for WC complete all as specified and directed.

Supply only in repairs PVC valveless, syphonic action type, 10 ltrs cap flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe 32mm dia complete all as specified and directed.

S&F in repairs Stainless steel grating removeable & fixable type for floor trap including jointing with solvent cement suitable for 100 mm dia of outlet complete all as specified and directed.

S & F 32 mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 including all necessary PVC bends fixed to walls, ceilings or laid in floors complete all as specified.

S & F 12mm thick Medium density fibre board, exterior grade, fixed to timber framework with screws complete all as specified and directed

M&L for Chipping, removing carefully loose/damaged concrete incl plastering (total thickness upto 60mm ) from surfaces of RCC members, in any location by low impact Hammer/Breakar without damaging the structure & cleaning the surfaces with wire brush including necessary scaffolding and disposal of debris out side MD land complete all as specified and directed. Note : 1) Hard concrete shall not be removed by force

M&L for cleaning existing reinforcement with wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. "Feovert" of "Krishna Conchem" OR "Roff Rust Cleaner' of 'Pidilite' OR 'Shali Rustoff' of 'STP Ltd', on rebars with time interval of 1 hr between the coats, complete all as specified and directed. Note :- Mode of measurement: superficial area of concrete will be measured.

M&L for Anticorrosive Treatment to Reinforcement using Corroseal - ZR of M/s Krishna Conchem or Epoxy Zinc Primer of M/s. Dr. Fixit by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces complete all as specified and directed . Note :- Mode of measurement: superficial area of concrete will be measured.

M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchem as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new concrete by brush application complete all as specified and directed.

M&L for building up the profile of structural members using polymer modified mortar from M/s. Krishna Conchem (Molith PMM) OR Polymer mortar HB of Dr Fixit, while the bonding agent is still tacking upto 20mm thickness including levelling, profiling etc complete all as specified and directed.

M&L for building up the profile of structural members using polymer modified from M/s Krishna Conchem (Molith PMM) OR Polymer mortar HB of Dr. Fixit, exceeding 20mm thick and not exceeding 40mm thick in two layers each of equal thickness including levelling, profilling etc complete all as specified and directed.

M/L for 20-25mm machine cut kota stone slab as in riser of steps, skirting, dado and pillar, cills and jambs laid over cement mortar backing coat jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beewax polish and including over 10mm thick screed bed or bedding layer in CM1:3 complete all as specified and as directed by EIC

E/M PORTION Excavation in trenches n.exc 1.5 m wide and n. exc 1.5 m in depth and getting out in Hard/Dense soil for removing/laying of cables complete all as specified and as directed by Engineer-in-charge.

Returning, filling in including spreading , leveling , watering and well ramming in layers n.exc 25 cm with soil complete all as specified and as directed by the Engineer-in- Charge.

Removing excavated material to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-Charge.

Supply and laying HDPE pipes of pressure rating 6 Kgf/Cm sq of size 50 mm laid in trenches complete all as specified and directed.

Supply and laying HDPE pipes of pressure rating 6 Kgf/Cm sq of size 32 mm laid in trenches complete all as specified and directed.

Supply, Laying,Testing & commissioning of LT XLPE insulated,Screened,PVC bedded galvanised steel strip or wire armoured,electric power cables with aluminium stranded conductor,1100 volts,grade cross sectional area 3.5 C x 50 sqmm confirming to IS : 7098(part-I) -1988 and as specified and directed by the Engr-in-Charge.(Location : INS TRATA Main LT Panel To P-02 Guest House Panel)

Supply, Laying,Testing & commissioning of LT XLPE insulated,Screened,PVC bedded galvanised steel strip or wire armoured,electric power cables with aluminium stranded conductor,1100 volts,grade cross sectional area 4C x 16 sqmm confirming to IS : 7098(part-I) -1988 and as specified and directed by the Engr-in-Charge.

Supply, Laying,Testing & commissioning of LT XLPE insulated,Screened,PVC bedded galvanised steel strip or wire armoured,electric power cables with aluminium stranded conductor,1100 volts,grade cross sectional area 2C x 10 sqmm conforming to IS : 7098 (part-I) -1988 and as specified and directed by the Engr-in-Charge.(Sea Rock Pathway Lights)

Supply and fix in replacement of decorative LED Bollard light between 9-12 watt capacity warm white made in cast aluminium spigot housing with decorative opal diffuser and IP 65 Protection complete including cable connection and taking down existing unserviceable light complete all as specified and directed.

Supply and Fix Highly efficeient multi LED street light 100 watt with pressure die cast aluminium housing, reflector and encloused with toghned glass ,IP65 Protection including taking down old unserviceable MH flood Light fittings complete all as specified and directed.

Supply, installing, testing and commissioning factory made and tested LT Panel Outdoor type, platform mounted, suitable for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system.conforming to IS : 375 all as specified. The panel shall be dust and vermin proof, protection class (IP-54) and made of 2.00 mm thick Stainless Steel Sheet SS316 thick & suitable frame work/ suitable size made up of MS Angle Iron.The panel shall Have front and Rear opening type with space for cable entry from back side of the panel, The Top of the Panel roof shall be Canopy shape to protect from Rain water staggering on panel body with proper ferrule & cable gland, internal wiring with only Aluminium bus bars if MCCB 63A and above rated and PVC insulated multistranded copper conductor FRLS cable of adequate size. The LT panle shall be of CPRI approved and all as approved by GE. The scope of work also comprising of the following:- Location:- INS TRATA Main Receiver Power Room

BUS BAR CHAMBER :- (a) 300 Amps 3 Strips Aluminium conductor for R Y B, and 150A for N with color coded heat shrinkable sleave and shall be mounted on non hygroscopic, non combustible, track resistant, high strength DMC material, interconnection of all incomings & outgoings. INSTRUMENT CHAMBER :- (i) Digital Multifunction Meter- 01 Set.(ii) Red,Yellow,Green Phase indicating Lights LED type 220V AC- 1 Set. (Set of three).(iii) Protection MCB 6 A SP C Series- 1 Set. (Set of three).(iv) Measurement CT 200/5A set of Three -01 Make of Metering Accessories :-L&T/ AE/ Trinity/ Schneider. INCOMING SUPPLY :- (i) MCCB 160 Amps 25 KA ,4 Pole with adjustable thermal & magnetic release 415 volts , 50Hz,=01 No. OUTGOING SUPPLY :- (i)MCCB 125 Amps 25 KA, 4 Pole with Fixed thermal & magnetic release 415 volts , 50Hz = 01 Nos, (ii)MCCB 100 Amps 16 KA, 4 Pole with Fixed thermal & magnetic release 415 volts , 50Hz = 01 No, (iii)MCCB 63 Amps 16 KA, 4 Pole with Fixed thermal & magnetic release 415 volts , 50Hz = 03 No, (iii)MCB SPN 32 Amps 10KA, 'C'Series -01 Nos, Make of MCCB:-Shall Be MES Approved List only as Approved by the GE.

Supply, installing, testing and commissioning factory made and tested LT Panel Outdoor type, platform mounted, suitable for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system.conforming to IS : 375 all as specified. The panel shall be dust and vermin proof, protection class (IP-54) and made of 2.00 mm thick Stainless Steel Sheet SS316 thick & suitable frame work/ suitable size amde out of MS angle Iron Frame.The panel shall have front and Rear opening type with space for cable entry from back side of the panel, with proper ferrule & cable gland, internal wiring with Aluminium bus bars if MCCB 63A and above rated and PVC insulated multistranded copper conductor FRLS cable of adequate size. The LT panle shall be of CPRI approved and all as approved by GE. The scope of work also comprising of the following:- Location:- Dolphin Guest House

BUS BAR CHAMBER :- (a) 200 Amps 4 Strips, Aluminium conductor, with color coded heat shrinkable sleave and shall be mounted on non hygroscopic, non combustible, track resistant, high strength DMC material, interconnection of all incomings & outgoings. INSTRUMENT CHAMBER :- (i) Digital Multifunction Meter- 01 Set.(ii) Red,Yellow,Green Phase indicating Lights LED type 220V AC- 1 Set. (Set of three).(iii) Protection MCB 6 A SP C Series- 1 Set. (Set of three).iv) Measurement CT 150/5A set of Three -01 Make of Metering Accessories :-L&T/ AE/ Trinity/ Schneider. INCOMING SUPPLY :- (i) MCCB 125 Amps 25 KA , 4 Pole with Fixed thermal & magnetic release 415 volts , 50Hz,=01 No., OUTGOING SUPPLY :- (i) MCCB 63 Amps 25 KA, 3 Pole with Fixed thermal & magnetic release 415 volts , 50Hz = 03 No, (ii) MCB 40Amps 10KA, 'C' Series TPN -01 Nos, (iii)MCB 40Amps 10KA, 'C' Series SPN -02 Nos, Make of MCCB/ MCB Shall be MES Approved List Makes only.

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

M&L for earthing with copper earth plate electrode 600 x 600 x 3 mm thick burried directly in ground vertically to a depth of not less than 2.25 mtr below ground level connected to copper strip of size 20x3 mm as earthing lead by means of nut, bolts and washers made out of brass metal and 40 mm dia GI pipe "light grade" for protection of earth lead and connected to DB or as directed by Engr -in-Charge including PCC Pit in Cement Concrete 1:3:6 (20mm Graded Stone aggregate) and RCC Cover of size 450X450X50mm in RCC 1:2:4 (20mm Graded Stone Aggregate) reinforced with and including 8.0mm dia TMT Bars @ 100mm centre to centre both ways, Galvanised Iron Wire Mesh, Funnel, Galvanised Iron Watering Pipe 20mm Bore (dia) Medium Grade, necessary Excavation in Soft/ Loose Soil, returning, filling in and removal of surplus Soil upto a distance of 50 mtr complete all as shown in Electrical Plate No. 5 of MES Schedule Part-I and Testing on completion complete all as specified and directed.

mp construction co

Joy builders

Vishal Builders