Renewal of BT Road Sellur 60 feet Road (115027R4280) at in Ward No 27

Amount

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand,silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering, ,and baling out water and cleaning and levelling the site etc.,complete

Providing of Granular Sub base using Grade I material softable 4001 of Morth with minimum CBR30 spreading inuniform layers with motor grader on prepared surface, mix in by palce method at OMC and compacting with Vibratory Roller to achieve the desired density including all labour charges etc, complete as per technical specification and as directed by the departmental officers. Morth - Rev V No. 111,112,401, 900

Providing and laying, spreading and compacting 0.396 m3 of 45-22. 40mm & 0.528 m3 of 22.40-2.36 mm & 0.396m3 of 2.36mm and below metal graded stone aggregate to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Providing and laying tack coat of 7 kgs/10 sqm over B.T surface treated with binder using 2 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev-5 Specifications.

Providing and laying tack coat of 2.5 kgs/10 sqm over B.T surface treated with binder using 2 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev-5 Specifications.

Providing and Laying 50mm Consolidated thick Dense Bituminous Macadam Using 0.24 cum of 26.50-13.20mm, 0.25 cum of 13.20-2.36mm and 0.23 cum of 2.36mm & below and with 53.20 Kgs of VG30/VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to work site, spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross sections and compacted by Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver at site etc., including hire charges and fuel charges for 20-30 ton CMP with bitumen boiler, tipper trucks, Paver finisher / 9m paver finisher , Vibratory / Pneumatic rollers and other tools and plant required including fuel and all other incidental charges etc.,complete as per specification using CMP as per clause 505 MORTH

Providing and laying Bituminous Concrete to 30 mm thick using 0.13 cum of 19.00-9.50mm, 0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 and below with 50.30kgs of VG30 /VG40 bitumen for premixing per 10sqm including cost and conveyance of all material to CMP site. heating the bitumen and aggregate to the required temperature and mixing the minimum required Temperature in central hot mix plant 20-30 tonnes capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 30mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonns Vibratory/ Pneumatic Roller to their required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 ton CMP with bitumen boiler , tipper trucks, paver finisher / 9m paver finisher, Vibratory / Pneumatic rollers and all other tools and plants required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev specification using.

Supply of FRC Manhole 600mm size dia cover with frame including cost of conveyance loading fixing the same etc complete.

Raising the existing circular manhole in heavy type including the removing the existing man hole cover with frame and dismantling the existing the cement concrete wall and tar road surface around the manholes using for raising the manhole with 1:2:4 (25 mm height 30cm height) including centering inside the manhole laying 15cm thick cement concrete 1:2:4(one cement two sand four aggregates) with 20mm granite chips for finishing the top surface of manhole etc., complete

Road marking with hot applied thermo plastic compound with reflect rising glass beadsd on Bituminous surface Providing and laying of hot applied thermo plastic compound 205mm thick including reflect rising glass beads @ 250gms.per sqm. area. thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level uniformand free from streadks sdand hole set complete. (as per MORT & H Specification No 803)

Manufacturing Supply and Fixing of Retro Reflective Road Name sign board single arrow big size out if wide angle cuble corner micro prismatic grade sheeting confirming to IRC67:2010 & type XI standards of ASTMD4956-09 specification sand fixed over 2mm thick aluminium sheet back support frame of stain less steel supported by 32NB stain less steel pipe all around and 65NB pipe vertical post firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 30cmX30cmX45cm complete. The information message shall be made out cut out letters in blue transparant overlay film as per IRC67-201 Guidelines, 7years pre qualification warrenty for Retro Reflective sheeting from the original sheeting manufacture & acertified copy of three years out door exposurere port from an independent test lab for the product offered shall be submitted by the contractor.The sign board shall be Retro Reflective type XI. The Retro Reflective sheeting should have manufactures WATER MARK on the sheeting surface for identification. Single Arrow Big Size 36" X 18"

Add GST 18%

MPS AND CO (BID ID -1123618)