CWE/P-17/2025-26

Amount

Repairs to pot holes any depth n.exc 1 Sqm each including sweeping free from dust and mud water scoring sunken surfaces in roads, paths, etc. cutting round edges to at least 25 mm in depth and making good by filling in screened and graded road metal watering and well ramming (incl supply of metal) and making good by applying tack coat @ 5 kg per 10 Sqm, and providing bituminous premix asphaltic semi dense concrete (design mix) 30mm thick (cosolidated) thickness with 5.5% binder content by weight of total mix laid with mechanical paver rolled and compacted to required camber and gredient with 8 to 12 ton power roller complete all as specified and directed.

M&L for Preparing existing black top surfaces by brushing with wire brushes for removing caked mud vegitation grass etc, sweeping with brooms and finally fanning the cleaned surface with mechanical air compressor to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer using paving bitumen VG-10 @ 5 Kg / 10 Sqm on road surface for laying bituminous macadam, complete all as specified and directed.

M&L for premixed bituminous macadam (design mix) with 4 % of binder content by weight of total mix using paving bitumen VG-30 mixed in mechanical hot mixed plant and premixed material laid with mechanical paver finished including rolling to required camber and gradient (consolidated thickness 75 mm or less) with 8 to 12 tonne power roller to required compaction, complete all as specified and directed. Note: The quantity of bitumen shall be provided as per Design mix approved by GE. (The cost of transportation of the material to the Govt approved lab and design mix charges shall be borne by the contractor). for the purpose of quoting, the contractor shall consider 4% binder by weight of total mix. However, the work shall be executed as per approved design and price adjustment shall be done only for variation (plus or minus) in quantity of binder priced at supply only rate of bitumen (as per purchase voucher of main producer).

M&L for Preparing existing black top surfaces by brushing with wire brushes for removing caked mud vegitation grass etc, sweeping with brooms and finally fanning the cleaned surface with mechanical air compressor to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer using paving bitumen VG-10 @ 5 Kg / 10 Sqm and bituminous premixed asphaltic semi dense concrete 30mm consolidated thickness using crushed graded stone aggregate mixed with binder content of paving bitumen VG-30 with 5.5% binder contents by weight of total mix by using self propelled mechanical paver, rolled and compacted to required camber and gradient with 8 to 10 Tonne capacity power roller including preparation of bitumen carpet in digital computarized weigh batch hot mix plant, complete all as specified. Note: The quantity of bitumen shall be provided as per Design mix approved by GE. (The cost of transportation of the material to the Govt approved lab and design mix charges shall be borne by the contractor). for the purpose of quoting, the contractor shall consider 5.5% binder by weight of total mix. However, the work shall be executed as per approved design and price adjustment shall be done only for variation (plus or minus) in quantity of binder priced at supply only rate of bitumen (as per purchase voucher of main producer).

M&L of new/ old black top surface road surface and applying one coat of retro reflective thermoplastic road marking paint 2 mm thick for longer durability with 8% glass beads using special applicator machine with heating arrangement upto 160 degree celcius. Paint material shall be conforming to Ministry of surface transport (MOST) specification 803.4 Vol - I as laid down in specification of road / bridge work "third revision" after cleaning surfaces, complete all as specified and directed.

S&F in repair Dual directional reflective cat eye of aluminium casted stud 100x100mm having micro cube corner spark glow reflector white/ red/ yellow on side provided with steel zinc plated nail of dia 12mm of length 120mm for fixing to road by hammering etc, complete all as specified and directed.

S&F in repair solar cat eye alunimum alloy shall (100% water proofing design according to IS) of size 125mm x 125mm of high efficiency monocrystalline solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 MCD complete all as per manufactures instructions, complete all as specified and directed.

S&F retro reflective sign board of size 120cm x 90cm or 90cm x 120cm (not exc 12 Sqft), rectangular or pentagonal shape, fixed both sides on board made out of aluminium composite panel (ACP) sheet 3mm thick fixed on SS-304 series hollow tubular section, 38mm dia 2 mm thick. A 20 mm square tube of 1.25 mm thick of SS series 304 (not exc 450mm c/c) to be fixed on both ways to support the ACP boards. The board shall be sheated with high intensity retor reflective sheet of blue colour or any colour as approved by GE, computerised designed writting letter/figures in (Block, Roman, Italic style or in Indian languages where required)/ index hands (natural size)/ arrows/ stops/ commas/ short lines/ dashes/ hypens bracket, holograms etc where necessary shall be made high intensity reflective sheet with in white colour letter, shape and sizes as required and approved by GE. The sigh board to be supported on 2 nos post of 60mm dia and 2.5 mm to 3.0 mm thick SS pipes of SS 304 series, exc 3 m and not exc 4 m in heigh with round moulded design cap on top. Pipes of the boards to be fixed in ground with PCC 1:2:4 type B2 (using 40mm graded stone aggregate) in post holes of size 45cm x 45cm x 75 cm depth (post holes and concrete includes in the rates) all as specified and directed by GE.

S&F in repair for 80cm dia traffic convex mirror made from single piece polycarbonate sheet not less than 2 mm thick mounted on PVC frame and fixed on 50mm bore 2.25m high stainless steel pipe (wall thickness 1.6mm) embedded in PCC 30cmx30cmx45cm deep below ground of mix 1:3:6 type C-1 including necessary earthwork/ excavation etc complete all as specified and directed.

Surface excavation in any type of soil n exc 30cm deep and averaging 15cm deep and getting out, complete all as specified & directed.

M&L for 75 mm thick cement concrete (1:3:6) type C-2, (using 40mm graded crushed aggregates) as in sub base to floor finishes, complete all as specified & directed.

M&L Hardcore broken stone boulders of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/ rammed to a true surface complete all as specified.

M&L for colour machine pressed precast concrete interlocking (Red/ Yellow) paver block of any size with 6-8mm pigment (glossy finish) any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 grade chemically coloured, laid dry over and including 50mm thick sand filling under paver, properly levelled etc, complete all as specified and directed. Note : Rate includes for cutting of paver blocks for curved portion also.

M&L PCC 1:2:4, type B-1, (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed

Notes: The Schedule of Credit amount shall be deducted from the total of this schedule (BoQ) to arrive at Contract Sum.

Sandeep Kumar (BID ID -3320180)

SANDAN SHARMA GOVT CONTRACTOR (BID ID -3321018)

KUMAR TRADING CO (BID ID -3320795)