Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.7 LAccepted-AOC | L1 | Accepted-AOC Being L1 bidder | |
| 2 | L2₹43.5 L+₹4.0 L (10.2%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 bidder | |
| 3 | L3₹43.9 L+₹4.4 L (11.2%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 bidder | |
| 4 | L4₹45.0 L+₹5.5 L (14.1%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 bidder | |
| 5 | L5₹45.8 L+₹6.4 L (16.2%)Rejected-Finance 0 MANPUR CHITBARAGAON CHITBARAGAON BALLIA UTTAR PRADESH 221713 | BALLIA | UTTAR PRADESH | 221713 | L5 | Rejected-Finance Being other than L1 bidder |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
20 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 862 EWS
Garrison Engineer 862 Engineer Works Sec
GER-24/2023-24 Repair to security wall / fencing, retaining wall, steel gates, area drainage, approach / path and hardstanding for Zone C including DKG of AGE B/R Dett-III under GE 862 EWS
2023_MES_603360_1
GER-24/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE 862 EWS
Class D a(i)
9 documents required · 9 mandatory
₹500
GE 862 EWS
₹1 L
Yes
11 Aug 2023
16 Jun 2023
22 Jul 2023
16 Jun 2023
20 Jul 2023
6 Jul 2023
Amount
Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15 cm thickness below or above the ground level, complete all as specified and directed.
M&L for 100mm thick plain cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) as in sub base for tiling, complete all as specified and directed.
M&L for 100mm thick plain cement concrete 1:2:4, type B-1 using 20mm graded crushed stone aggregates as in hard standing, spike rolling and footpath, finished the surface even and fair, complete all as specified and directed.
M&L for forming construction joints 30mm deep x 10mm wide filled with sealing compound Grade-'A', complete all as specified and directed.
M&L for 75mm thick plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregates) as in sub base of floors and mass concrete etc, complete all as specified and directed.
M&L for pre polished coloured chequered cement concrete tiles of size 30 cm x 30cm x 25 mm thick set, jointed in neat cement slurry in floor and pointed in white or coloured (apporved by GE) cement to match the shade of tiles laid over and including 15 mm thick screed bed in cement mortar 1:4, complete all as specified and as directed.
M&L for providing cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps, and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm height, coping, benching, hold fast, water troughs, bed block and the like including weathering, slightly rounded or chamfered angle and throating including necessary form work complete all as specified and directed
M&L for machine pressed precast concrete interlocking paver block of any shape and size approved by Engineer-in-Charge , ISI marked (IS:15658-2006) 80mm thick, M-25 grade (Heavy Traffic), in paths and hardstanding, with grey cement, laid tightly over & including 25mm thick dry sand cushion (compacted) and joints filled with dry sand, colour and pattern as approved by GE, complete all as specified and directed. (Note: 20% coloured interlocking paver block with colour pigmant and 80% grey cement interlocking paver block with no pigment are used as directed by Engr-in-Charge).
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and directed.
M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 , complete all as specified and directed.
Description all as per srl item No. 10 above but except brick NOTE: Old stone retrieved from demolition shall be used.
M&L for stone walling of random rubble masonry, uncoursed, well bonded, bedded and soilidly hearted, built in cement mortar 1:6, complete all as specified and directed.
Description all as per srl item No. 12 above but except stone. NOTE: Old stone retrieved from demolition shall be used.
Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
M&L for 15 mm thick rendering on brick surfaces or other than fair faces of brick masonry in cement mortar 1:4 surface finished even & smooth without using extra cement, complete all as specified and directed.
M&L for Preparation newly plastered surface and applying two coats of exterior weather proof paint in camouflage of two or more colours pattern over and including a coat of primer,complete all as specified and directed by Engineer -in - Charge.
M&L for complete removal of existing treatment of wall surfaces including cornices and chajjas etc and applying two coats of exterior weather proof paint over a coat of primer, complete all as specified and directed by Engr-in-Charge.
M&L for complete removal of existing treatment on wall /roof surface including cornices and chajjas etc and applying two coats of exterior weather proof paint of camouflage of two or more colours pattern over and including a coat of primer, complete all as specified and directed by Engineer -in - Charge.
M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of white cement primer, complete all as specified and directed.
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground as post embedded in concrete, brick work, masonry work etc,complete all as specified and directed.
Dismantling of old unserviceble fencing wire mesh, including round bars of any type, complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removing surplus soil to a distance n exc 50m and making good surface in soft / loose soil, complete all as specified and directed.
M&L for plain cement concrete, type B-2 1:2:4, (using 40 mm graded crushed stone aggregates) in foundation, filling and mass concrete as in post, complete all as specified and directed.
S&F for mild steel work as in posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165, embedding in concrete, complete all as specified and directed. Note :- (i) Size of angle shall be as per standard drgs. (ii) Earth work and concrete shall measured & paid for separately under respective items of this BOQ.
Fixing only chain link fencing including line wires, any mesh, size & type to standards, rails, straining bolts, round bar etc including provision of binding wire, complete all as specified and directed. (Note: 10mm dia round bars and flat iron shall be measured and paid separately under respective items of this BOQ).
Supply only chain link MS galvansied fencing, not exc 4 kg per Sqm any size of type, complete all as specified and directed
M&L for mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality comfarming to Fe-410-W, grade E-250, as in columns complete all as specified and directed.
M&L for mild steel 12mm bolts and nuts (machine made) with hexagonal or square head at one end and screwed the other with washers of length n exc 30 cm, complete all as specified and directed.
S&F for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line of wire to be measured) after dismantling of old unserviceble barbed wire complete all as specified and directed.
S&F for concertina coil 600 mm dia, 56 loops, 2.5mm core wire heavy galvanised (wire-275 GSM & strip-200 GSM), tensile strength of wire 1400-1500 N/Sqmm, weight 14.63 Kg/coil, stretchable length 12M inlcuding securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc after dismantling of old concertina coil of any type complete all as specified and directed.
M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for plain cement concrete, type D-2 1:4:8, (using 40 mm graded crushed stone aggregates) in foundation, filling and mass concrete as in post, complete all as specified and directed.
M&L for providing precast cement concrete 1:3:6 type C-1 using (20mm graded crushed aggregate ) as in PCC bond stone, set in cement mortar 1:6, complete all as specified and directed.
M&L for extra over stone walling of any type of stone for hammer dressing to face stones and dressing of face beds with maximum depression on face from straight edge held against the dressed surface n exc 40 mm and joints, as specified, of random rubble walling, uncoursed or brought upto courses, complete all as specified and directed.
M&L for raised pointing to random or polygonal rubble, uncoursed or brought upto courses in Cement Mortar 1:4, complete all as specified and directed.
Description all as per srl item No. 37 above but except stone / boulders. Note: Stone boulder stacked under item No 37 shall be used for back filling under this item for new retaining wall .
S&F in repair for 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to wall or in floor or trenches as in weep hole, complete all as specified and directed.
Dismantling structural steel work including doors, gates, grills grating and framed truss etc, complete all as specified and directed.
M&L for mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks or portion framed and hung as gates, including pintel hinges, stops, hand made sliding bolt etc and similar work conforming to Fe 290 or E-165 work including welded fabricks frames, gate and framed truss etc, complete all as specified and directed.
S&F for welded steel wire fabric to wood or steel members and weight per Sqm not exc 4 kg, complete all as specified and directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided, complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided, complete all as specified and directed.
M&L for reinforced cement concrete tye B-1, 1:2:4, (nominal Mix) (20mm graded crushed stone aggregates) as in supported on wall, beam and columns in floors roofs, landing balconies, canopies, deck slabs and the like, complete all as specified and directed
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality comfarming to Fe-410-W, grade E-250, as in columns complete all as specified and directed.
M&L for mild steel TMT bars 6mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality comfarming to Fe-410-W, grade E-250, as in columns complete all as specified and directed.
M&L formwork to soffits of suspended slabs such as roof slabs, landings and similar work; n exc 200mm thick (Horizontal and sloping) for rough finished surface of concrete, complete all as specified and directed.
M&L for plain cement concrete, type B-1, 1:2:4, (using 20 mm graded crushed stone aggregates) as in surface channel and drains, complete all as specified and directed.
M&L for formwork to faces of walls, retaining wall, abutments, parapets, drains chennels and staircase railings and similar work including attched pillasters, buttresses etc, vertical or tbatter including fair finished surface, complete all as specified and directed.
SUBASH CHANDER
M/S BADRI NATH GUPTA
VIJAY KUMAR SURI AND SONS
NATIONAL TRADING COMPANY
SATVIR GUPTA ENGINEER and CONTRACTOR
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .