STMC on National Highways under the Jurisdiction of NH Division Nanded, Ch. Sambhajinagar Circle in the State of Maharashtra during FY 2025.26 1. NH 752I in Fulsawangi to Mahur section in Km 104.000 to 133.000

Item No.1 Supplying hard murum/ kankar at the road site, including conveying and stacking complete.

Item No.2 Restoration of rain cuts with soil, murum gravel or a mixture of these, clearing the loose soil, benching for 300mm width laying fresh material in layers not exceeding 250 mm and compaction with plate compactor or power rammer to restore the original alignment, level and slopes as per drawings and MORTH specification clause 3002

Item No.3 Constructing gabion structure 1 Meter high or required section made up of soft mechanically woven hexagonal shaped G.I. wire confirming to IS 16014:2012 having zinc plus PVC coating of overall diameter of 3.7 mm and tying lacing wire of 3.2 mm with edge wire confirming to overall diameter 4.4 mm edges being mechanically selvedge including placing in position, fitting neatly with trap stone rubble (15 to 23 cm) all loose ends to be securely tied (Excluding transportation) etc. complete. ( In Dry condition and for under water installation extra cost to be considered)

Item No.4 BITUMINOUS MACADAM:-Providing and laying bituminous macadam using crushed aggregate of Grading 1, premixed with bituminous binder, transported at site with VTS, laid over a previously prepared surface , finished to the required grade ,level, alignment,and rolling to achieve the desired density for 80/100 mm compacted thickness with drum mix type hot mix plant with SCADA having complying essential features of Hot mix plant as per IRC-27 2009 specified conditions and attachments such as electronic load sensor based belt conveyers,automatic synchronization of bitumen and aggregate fedder,built in dust controller system and PLC for Drum Mix plant ,Sensor paver,and Vibratory roller excluding prime/Tack coat etc. complete --Bitumen 3.30% of specified grade (VG-30 bulk bitumen rates are considered to arrive at rates) With Tack coat of VG 10 3 Kg / 10 Sq.m.

Item No.5 BITUMINOUS CONCRETE:--Providing and laying bituminous concrete using crushed aggregate of grading1, premixed with bituminous binder @5.40% by weight of total mix and filler, transported at site with VTS, laid over a previously prepared surface, finished to the required grade ,level, alignment, and rolling to achieve the desired density for 50mm compacted thickness with drum mix plant with SCADA, Sensor paver and Vibratory roller excluding prime/Tack coat etc. complete --Bitumen of specified grade with stone dust filler. (VG-30 bulk bitumen rates are considered to arrive at rates) With Tack coat of VG 10 3 Kg / 10 Sq.m.

Item No.6 Spreading hard murum for side width etc., Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc.complete.

Item No.7 The maintenance of drains include erosion, repair, clearing, cleaning, reshaping, regrading, deepening of side drains as well as catch water drains etc. complete

Item No.8 Trimming of grass, shurbs and weeds from the shoulders/berms and disposing off the same to suitable locations etc. complete