GEAFU-22/2025-26

Amount

STEEL FURNITURE : Taking down worned out components of the following steel furniture, S&F new component as per shape and size specified on respective drawings and as directed by Engineer-in-charge

ALMIRAH LARGE STEEL WITH SHELVES (FD-351/1031)

Shutter (Single Leaf) made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side after preparation surfaces

Back made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side

Side made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side

Bottom made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side

Shelves made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side

Six Levers lock Make : Godrej/Harrison/Link with duplicate keys

Three way Locking Device of 10 mm dia MS rod as per trade pattern incl a coat of red oxide primer

Chromium plated Steel Handle 125mm

Chromium plated MS Key plate fixed with screw and nuts

Leg made of 1.6 mm thick MS sheet with Gas welding incl a coat of red oxide primer

Almirah Small/ Medium steel (FD-350 /1032/243)

Shutter (Single Leaf) made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side

Shelves made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side

Back made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side

Side made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side

Bottom made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side

Six Levers lock Make : Godrej/Harrison/Link with duplicate keys

Three way Locking Device of 10 mm dia MS rod as per trade pattern incl a coat of red oxide primer

Chromium plated Steel Handle 125mm

Chromium plated MS Key plate fixed with screw and nuts

Leg made of 1.0 mm thick MS sheet with Gas welding incl a coat of red oxide primer

Locker Bedside Steel ( FD-257/1029)

Shutter (Single Leaf) made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side

Back made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side

Side made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side

Bottom made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side

Shelves made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side

125mm Steel Handle 'D' type for Locker Bedside steel

Leg made of 1.0 mm thick MS sheet with Gas welding incl a coat of red oxide primer

75mm haps & stapple fixed with rivets of locker steel

Hanging Rod of 1.6mm thick chromium plated MS Rod

CHARPOY IP WITH PLYTOP (FD/MAP-II/01)

12mm thick ply wood top BWR Grade ISI Marked of size 1950mm x 900mm (Single piece) to be fixed to frame with MS nuts & screws.

PVC Shoe at bottom of the leg of the Charpoy

Charpoy GI Pipe with Plytop: (FD-220)

3 way Galvanized Iron Elbow 32 mm dia. Note weight of each elbow shall not be less than 450 grams

Galvanized iron check nut 32 mm dia. Note :- weight of each check nut shall not be less than 125 grams

Long rail of 32 mm dia galvanized iron pipe medium grade incl threading at both ends as directed

Short rail converted out of retrieved Long rail, Item No 12.03 above incl cutting, threading as required and directed

Leg converted out of retrieved Short rail, Item No 12.04 above incl cutting, threading as required and and directed

Provn of Two Nos MS cleat as shown on drg to hold the MNF set and one MS plate at the bottom to each Leg converted out of retrieved Short rail

12mm thick ply wood top BWR Grade ISI Marked of size 1980mm x 900mm (Single piece).

Teapoy Verandah FD-255/(FD/E6/MAP/12)

Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge

PVC Shoe at bottom of the leg

CHAIR WRITING MAP (FD/E6/MAP/12)

Replacement of complete seat and back with new moulded foam cushioned 40 density as shape and size, covered with tapestry cloth as approved along with PVC liping all round, as directed, Note- Cost of tapestry cloth not less than Rs 450/- RM.

Hand rest one piece made of black integral skin,reinforced with MS insert it.

BED HARD STEEL( FD/E6/MAP/08(R))

12mm thick ply wood top of size 1950mm x 900mm (Single piece) BWR Grade ISI Mark with MS screws, complete all as specified

18mm thick prelaminated particle board at head side of the bed as specified

18mm thick prelaminated particle board at foot side of the bed as specified

PVC shoes at the bottom of leg.

CHAIR COMPUTER (FD/E6/MAP/01)

Replacement of complete seat and back with new moulded foam cushioned 40mm density as shape and size, covered with tapestry cloth as approved along with PVC liping all round, as directed, Note- Cost of tapestry cloth not less than Rs 450/- RM.

Hand rest one piece made of black integral skin,reinforced with MS insert it. Hand rest have slope towards front as specified

Pedestal assembly complete

Twin wheel coasters press fitted at the bottom of leg.

Hydraulic system

TABLE COMPUTER (FD/E6/MAP/03)

Top of 18mm thick pre-laminated particle board incl PVC lipping all around the top

Drawer of 18 mm thick pre-laminated particle board fixed with telescopic channel

Keyboard tray of 18 mm thick pre-laminated particle board fixed with telescopic channel .

PVC shoes at the bottom of leg.

Chair Verandah (FD-256, 259, 359)

Taking out old U/S cane/newar and rubber shoes from chair verandah, removing of foreign materials from the iron frame by rubbing with sand paper, painting two coats with white synthetic enamel paint and recanning seat and back with 4 mm wide half round white plastic cane of superior quality as directed by Engineer-in-Charge

PVC/Rubber shoes as per sample approved

Cutting down wornout portion of MS Tube of the steel frame of Tables and replace with 25mm/32mm dia 1.6mm wall thickness MS tube in one piece to bring into original size as per drawing duly welding , applying of red oxide primer after preparation of surface. Upto 300mm long piece will be counted as one.

CHAIR VERANDAH (FD/MAP-II/06) Taking down unserviceable PVC seat from chair verandah and re-fixing with best quality new PVC Seat 4 mm thick and PVC edges 20mm folded towards back and weight not less than 1.85 Kg and grooves 90x10mm 10 Nos, on seat &back including applying one coat of white synthetic enamel paint of superior quality to chairs as per drawings all as specified and as directed by Engineer-in-Charge.

All as per item No 20.00 here-in-before but for PVC Back

Rack Shoe Steel (FD/E6/MAP/08(R)

MS Pipe of 25mm dia for leg frame by welding

MS Jali as shown on drawing

FOAM WITH BACK and WITH OUT BACK (FD-77(M)

Seat Plank size 1800mm x 255mm x 25mm to Foam with back made out of 1st class hard wood (teak wood) including applying two coats of french polish complete and fixed to steel /iron frame with suitable GI nuts (09 Nos)

Back Plank size 1800mm x 150mm x 25mm to Foam with back made out of 1st class hard wood (teak wood) including applying two coats of french polish complete and fixed to steel /iron frame with suitable GI nuts (09 Nos)

Seat Plank size 1900mm x 255mm x 25mm to Foam without back made out of 1st class hard wood (teak wood) including applying two coats of french polish complete and fixed to steel /iron frame with suitable GI nuts (03 Nos)

Chair Visitor of all models (TP)

Repair to chair visitor with cushion of all models, including repair/replacement of seat, and back, welding of broken joints of frame of chair visitor to make the chair serviceable all as directed.

TABLE OFFICE CLERK/TYPIST STEEL (FD-84(M)/1004/FD-1006)

Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge

Drawer made of 22 gauge MS sheet with a coat of red oxide primer

Six levers Lock of Godrej/Harrison with duplicate keys.

PVC Shoe at bottom of the leg of the Table

Painting of the following furniture items with two coat of synthetic enamel paint (colour as approved by Engineer-in-Charge) after preparation of surfaces :-

Almirah Steel Large with Shelves, FD-351/1031

Almirah Small/medium steel (FD-350 /1032/243)

Locker Bedside Steel ( FD-257/1029)

Charpoy IP with plytop (FD/MAP-II/01)

Table office ckerk steel (FD-84(M)/1004)

Almirah Steel Large 1/2 H 1/2 SH (MAP)

Chair writing MAP(FD/E6/MAP/12

Bed Hard FD/E6/MAP/08®

Table computer FD/E6/MAP/03

Shoe rack steel MAP FD/MAP/02 ®

Teapoy Verandah (FD-255)

KALSOTRA CONSTRUCTION CO (BID ID -3361890)

shivom builders (BID ID -3362351)