Repairs to steel furniture to CG units Sailors and Offices Married Accommodation at chennai area under GE(I) CG Chennai

Amount

ALMIRAH LARGE STEEL,FD-1031

Removing UNSV door shutter carefully by unriveting the hinges,S&F new door shutter made of 1 mm thick MS sheet of same size and shape duly fixed to almirah large steel with new 80mm long MS hinge. Complete all as directed and shown on drawing.

Removing UNSV lock from shutters of almirah large steel;S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link

Removing UNSV handle from almirah steel large ,S&F new 130mm long chromium plated handle to steel shutters ,Complete all as directed and shown on drawing

Removing UNSV/damaged shelf carefully by removing the rivets and welding spots,S&F new shelf made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing.

Removing UNSV/damaged bottom portion carefully by removing rivets and welding spots and S&F new bottom made of 1 mm thick MS sheet of same size and shape by welding . Complete all as directed and shown on drawing.

Removing UNSV leg from bottom of almirah carefully by unriveting and using hand held cutting machine without damaging the other parts.S&F new leg made of 1mm thick MS sheet to the existing place through welding and riveting.Complete all as directed and shown on drawing.

Spot gas welding

Material and labour for painting each almirah by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth.Two coats of synthetic paint as per existing shade shall be applied externally and internally to complete almirah.The painting to each article shall only be carried out by spray machine only.

ALMIRAH LARGE STEEL,FD/E6/MAP/18

Removing UNSV door shutter carefully by unriveting the hinges,S&F new door shutter made of 1 mm thick MS sheet of same size and shape duly fixed to almirah large steel with new 80mm long MS hinge. Complete all as directed and shown on drawing.

Removing UNSV lock from shutters of almirah large steel;S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link

Removing UNSV handle from the almirah steel large ,S&F new 130mm long chromium plated handle to steel shutters ,Complete all as directed and shown on drawing

Removing UNSV lock from internal safe of almirah large steel;S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link

Spot gas welding

Material and labour for painting each almirah by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth.Two coats of synthetic enamel paint as per existing shade shall be applied externally and internally to complete almirah.The painting to each article shall only be carried out by spray machine only.

ALMIRAH STEEL MEDIUM WITH SHELVES,FD-67(M)/1032

Removing UNSV door shutter carefully by unriveting the hinges,S&F new door shutter made of 1 mm thick MS sheet of same size and shape duly fixed to almirah medium steel with new 80mm long MS hinge. Complete all as directed and shown on drawing.

Removing UNSV lock from shutters of almirah medium steel;S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link

Removing UNSV handle from the almirah steel medium ,S&F new 130mm long chromium plated handle to steel shutters ,Complete all as directed and shown on drawing

Removing UNSV/damaged shelf carefully by removing the rivets and welding spots,S&F new shelf made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing.

Removing UNSV/damaged bottom portion carefully by removing rivets and welding spots and S&F new bottom made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing.

Removing UNSV leg from bottom of almirah carefully by unriveting and using hand held cutting machine without damaging the other parts.S&F new leg made of 1mm thick MS sheet to the existing place through welding and riveting.Complete all as directed and shown on drawing.

Spot gas welding

Material and labour for painting each almirah by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth.Two coats of synthetic enamel paint as per existing shade shall be applied externally and internally to complete almirah.The painting to each article shall only be carried out by spray machine only.

BED HARD (FD/E6/MAP/08(R)

Removing of old unserviceable PVC Shoes,Supply and fixing new High quality hard PVC shoes of size 38mm x 38mm,Complete all as specified and showin in drg.

Removing of old unserviceable prelaminated particle board from head board ,Supply and fixing in position with new cut piece at head board of size 638mm x 201mm made of 18mm thick prelaminated MDF board with 2mm thick PVC beading alround its edges duly fixed with suitable wooden screw.complete all as specified and shown on drg.

Removing of old unserviceable prelaminated particle board from foot board,Supply and fixing in position with new cut piece at foot board of size 638mmx314mm made of 18mm thick prelaminated MDF board with 2mm thick PVC beading alround its edges duly fixed with suitable wooden screw .complete all as specified and shown on drg.

Removing of old unserviceable ply top,Supply and fixing in position with new top of 12mm thick Plywood BWR grade -AA of size 1974mm x 824mm duly fixed with 12 x Nos of 50mm long 8mm dia flat head nut , bolts and washers. complete all as specified and shown on drg.

Painting the frame of the Bed Ply Top Steel with two coat of black paint with spray machine of approved quality after preparation of steel surface by sanding with sand emery paper and dusting the surface with clean cloth. The Bed Ply Top Steel frame shall be made smooth by applying metal putty on etched surface only where required.

CHARPOY FOLDING IP HARD TOP, FD-388®

Removing of old unserviceable top by unscrewing ,Supply and fixing new top made of 8mm thick BWR Plywood graed-AA of size 1880mmx900mm duly fixed in position with 50mm long 8mm dia flat head nut , bolts and washers. complete all as specified and shown on drg. .

Removing the old unserviceable MS conduit pipe stiffeners,Supply and fixing new MS conduit pipe stiffeners of 25mm dia of 18 guage to charpoy through welding. complete all as specified and shown on drg.

Removing of old unserviceable PVC shoes,Supply and fixing new best quality PVC shoes of dia 25mm and height 30mm shall be provided to legs of charpoy.complete all as specified and shown on drg.

Painting the charpoy folding with two coat of black paint with spray machine of approved quality after preparation of steel surface by sanding with sand emery paper and dusting the surface with clean cloth. The charpoy shall be made smooth by applying metal putty on etched surface only where required.

CHARPOY IP HARD TOP,FD/MAP-II/01

Removing of old unserviceable Top ,Supply and fixing new top made of 12mm thick BWR Plywood grade-AA of size 1980mmx900mm fixed 12x Nos of 50mm long 8mm dia flat head nut , bolts and washers. complete all as specified and shown on drg.

Removing old broken unserviceable stiffeners,Supply and fixing new MS Square tube stiffener of size 25mmx25mm of 18 Guage duly fixed in charpoy through welding in position as shown in drg.complete all as shown on drg and as directed

Painting the charpoy with two coat of black paint with spray machine of approved quality after preparation of steel surface by sanding with sand emery paper and dusting the surface with clean cloth. The charpoy shall be made smooth by applying metal putty on etched surface only where required.

CHARPOY GI PIPE WITH PLY TOP,FD-220/220(R):-

Taking out existing unserviceable /broken plywood from the charpoy GI pipe by unscrewing nut,bolt ,washer and flat iron. Tightening each part of the entire frame of charpoy by using pipe wrench and Supply and fixing new 12mm thick plywood BWR grade-AA made of wood and other lignocellulosic products conforming to IS-303 of size 1980mm x 900mm fixed over the GI pipe frame and fixing 3 components(i.e- ply ,flat iron and rail )with new GI nylon insert nut, bolt and washers 8mm dia 62 to 65mm long as directed by Engr-in Charge and all as specified.

CHAIR VERANDAH:-, FD-256 ,259,FD/MAP-II/06

Spot gas welding to broken parts/joints of chairs.

Removing of existing torn out/unserviceable plastic cane from chair verandah and recanning the chair fully both seat and back with new plastic cane of virgin quality white, half round of size 4mm wide and 0.60 mm thick.complete all as specified and shown on drawing.The canning shall only be done after painting the chair.

Removing the old broken shoes of chairs and Supply and Fixing best quality new PVC shoes to the legs of chair.

Removing the existing unserviceable/broken PVC seat and back from the chair,supply and fixing new PVC seat and back 4mm thick to the chair verandah MAP after providing one flat iron of size 20mmx5mm in support of PVC seat at centre between two sides through proper welding .The PVC seat shall got approved from GE before supply.The PVC seat shall be fied only after painting the chair.

Painting the frame of the chairs by two coats of synthetic enamel white of approved quality paint after prepartion of steel surface by sanding with sand emery paper and dusting the surface with clean cloth.The chair frame shall be made smooth by applying metal putty whereever required.

CHAIR STEEL TUBULAR WITH ARM:FD-75(M)

Scratching the entire frame of chair and applying one coat of synthetic enamel paint after preparation of surfaces by removing the old paint with sand emery paper. Complete all as specified and as directed by Engr-in-Charge

Remvoing the old unserviceable and broken MS flat and supply and fixing MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat.

Removing the old unserviceable seat from the frame of the chair. Supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm

Removing the old unserviceable back from the frame of the chair. Supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm

Removing the old unserviceable arm and supply and fixing new arm of 1st class teak wood as per drg.

Removing the old unserviceable Hard rubber shoes and supply and fixing new Hard rubber shoes as per drg.

Removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg.

CHAIR STEEL TUBULAR WITHOUT ARM: FD-75(M)

Scratching the entire frame of chair and applying one coat of synthetic enamel paint after preparation of surfaces. Complete all as specified and as directed by Engr-in-Charge

Removing the old unserviceable and broken MS flat and supply and fixing MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat.

Removing the old unserviceable seat from the frame of the chair. Supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm

Removing the old unserviceable back from the frame of the chair. Supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm

Removing the old unserviceable Hard rubber shoes and supply and fixing new Hard rubber shoes as per drg.

Removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg.

CHAIR COMPUTER, TP, FD/E6/MAP/01

Removing the existing torn out tapestry cloth ,pressed foam cushion,elastic webbing tape,PVC lipping from seat and back by unscrewing the seat and back from frame of chair carefully.S&F new seat and back made by using 60mm thick 40 density foam sheets,new webbing tape,new PVC lipping duly covered with new tapestry cloth of approved colour and texture of rate not less than 350 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.The seat and back shall also be covered with plastic transparent film.Complete all as specified and as directed.

Removing the existing torn out tapsetry cloth from seat and back of chair carefully after removing the PVC lipping.S&F new tapestry cloth of approved colour and texture to seat and back of chair along with PVC lipping to restore the chair in original shape ,the rate of cloth shall not be less than 350 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.Complete all as specified and as directed.

Removing old unserviceable arm rest of chair and S&F new arm of same shape and size ,made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in -charge.

Removing unserviceable castor twin wheels and S&F new castor twin wheel suitable for chair computer all as directed

Removing unserviceable 5 spokes stainless steel adjustable pedestal assembly, S&F new 5 spokes stainless steel adjustable pedestal assembly to chair computer all as specified and directed by Engr -in charge.

Removing unserviceable hydraulic gas lift cylinder of chair ,S&F new hydraulic gas lift cylinder to chair.Complete all as directed and shown on drawing.

Painting to all steel portion of chair computer with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth.

CHAIR WRITING / VISITOR ,TP, FD/E6/MAP/12

Removing the existing torn out tapestry cloth ,pressed foam cushion,elastic webbing tape,pVC lipping from seat and back by unscrewing the seat and back from frame of chair carefully.S&F new seat and back made by using 60mm thick 40 density foam sheets,new webbing tape,new PVC lipping duly covered with new tapestry cloth of approved colour and texture of rate not less than 350 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.The seat and back shall also be covered with plastic transparent film.Complete all as specified and as directed.

Removing the existing torn out tapsetry cloth from seat and back of chair carefully after removing the PVC lipping.S&F new tapestry cloth of approved colour and texture to seat and back of chair along with PVC lipping to restore the chair in original shape ,the rate of cloth shall not be less than 350 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.Complete all as specified and as directed.

Removing old unserviceable arm rest of chair and S&F new arm of same shape and size ,made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in -charge.

Painting to all steel portion of chair writing with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth.

CHAIR SCHOOL WITH HAND BOARD,FD/E6/MAP/05

Removing UNSV / broken hand board of Chair school with hand board and supply and fix new hand board made out of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade with 4mm teak wood edging all around the hand board.Complete all as directed and shown on drawing.

Removing UNSV one piece PVC seat and back and supply and fix new one piece seat and back to Chair school with hand board.Complete all as directed and shown on drawing. Make of one piece seat and back : Nilkamal/Supreme/Cello/AMKO/Blow plast.

Removing the existing foot rest wire mesh of chair school and S & F the same with new one duly welded to match with existing complete all as specified, as directed and as shown on drawing.

Removing old UNSV shoes,Supply and fix new PVC shoe suitable to each leg .complete all as directed and as shown on drawing.

Material and labour for painting each chair by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth.Two coats of synthetic enamel paint as per existing shade shall be applied externally and internally to complete chair.The painting to each article shall only be carried out by spray machine only.

TABLE OFFICE OFFICER STEEL,FD-1003

Removing UNSV top ;S&F new top of size 1680mmx870mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around duly fixed with adhesive and headless nails . Complete all as directed and shown on drawing.

Removing the existing unservicable /rusted drawer ; S&F new drawer made of 1mm MS sheet as per size and dimension with 100 mm long chrome plated handle fixed at front.. Complete all as directed and shown on drawing.

Removing UNSV lock from drawers and shutters ;S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link

Removing the old broken PVC shoes from the legs of table,S&F new PVC shoes of size 25mmx25mm having metal washers fitted inside at bottom.

Continous gas welding to all broken joints of table in length of 1 cms

Material and labour for painting each table office officer steel by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth.Two coats of synthetic enamel paint as per existing shade shall be applied externally and internally to complete table.The painting to each article shall only be carried out by spray machine only.

TABLE OFFICE CLERK STEEL,FD-84(M)/1004

Removing UNSV top carefully;S&F new top of size 1200mmx610mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing the existing unservicable /rusted drawer ; S&F new drawer made of 1mm MS sheet as per size and dimension with 100 mm long chrome plated handle fixed at front.. Complete all as directed and shown on drawing.

Removing UNSV lock from drawers and shutters ;S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link

Removing the old broken PVC shoes from the legs of table ,S&F new PVC shoes of size 25mmx25mm having metal washers fitted inside at bottom.

Continous gas welding to all broken joints of table in length of 1 cm

Material and labour for painting each table office clerk steel by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth.Two coats of synthetic enamel paint as per existing shade shall be applied externally and internally to complete table.The painting to each article shall only be carried out by spray machine only.

TABLE BED SIDE (MAP) ,FD/E6/MAP/15(R)

S/F new top with teak wood beading made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood beading at all edges. Complete all as specified and as shown on drawing

S/F new sides with teak wood beading made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thickteak wood beading at all edges. Complete all as specified and as shown on drawing

S/F new Upper drawer made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade with bottom of 6mm BWR plywood including 4mm thick teak wood beading at all edges.Complete all as specified and as shown on drawing

S/F new Back ply 6mm BWR.

S/F new lower drawer made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade with bottom of 6mm BWR plywood including 4mm thick teak wood beading at all edges. Complete all as specified and as shown on drawing

S/F new top upper back made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood beading at all edges. Complete all as specified and as shown on drawing

S/F new handles 75mm long chrome plated of dia 8mm fixed with suitable screws.

Painting to steel frame of table bed side steel with one coat of synthetic enamel paint of existing color after cleaning,dusting and scratching the iron surface with sand emery paper.

TEAPOY VERANDAH,FD-35/255

Removing UNSV top from teapoy verandah carefully;S&F new top of size 900mmx450mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing old UNSV shoes,Supply and fix new PVC shoe suitable to each leg .complete all as directed and as shown on drawing.

S&F long stiffener of length 750mm of conduit pipe of 20mm dia of wall thickness 1.6mm welded in between the short siffeners at bottom of teapoy,irrespective of what is shown in drg

S&F short stiffener of length 350mm of conduit pipe of 20mm dia of wall thickness 1.6mm welded in between the legs of teapoy,irrespective of what is shown in drg

Material and labour for preparation of the old painted steel surfaces by scraping with emery paper and applying one coat of synthetic enamel paint of white colour of approved quality complete all as specified, as directed and as shown on drawing.

TABLE COMPUTER ,TP, FD/E6/MAP/03

Removing UNSV top from table steel carefully;S&F new top of size 900mmx560mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing the existing unservicable key board of table computer by removing the unsv telescopic channel.supply and fix key board attached with new telescopic channel made out of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing the existing unservicable mouse pad board complete from Table computer and supply and fix new mouse tray18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing the existing unservicable CPU stand part complete from Table computer and supply and fix new CPU stand made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing UNSV/damaged drawer complete from Table computer and supply and fix new drawer made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails.The drawer shall be provided with decorative knob. Complete all as directed and shown on drawing.

Material and labour for preparation of the old painted steel surfaces by scraping with emery paper and applying one coat of synthetic enamel paint of white colour of approved quality complete all as specified, as directed and as shown on drawing.

TEAPOY VERANDAH,FD/E6/MAP/17

Removing UNSV top from teapoy carefully;S&F new top of size 750mmx450mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing old UNSV shoes,Supply and fix new PVC shoe suitable to each leg .complete all as directed and as shown on drawing.

Material and labour for painting each teapoy by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete almirah.The painting to each article shall only be carried out by spray machine only.

RACK SHOE STEEL,FD/E6/MAP/02(R)

Removing the existing damaged/rusted legs (U shaped) carefully without damaging the other parts by using hand held cutting machine,S&F new legs (U shaped) made out 25mm dia MS pipe 18 gauge duly welded to its position.Complete all as directed and shown on drawing.

Removing UNSV wire mesh (Jali) shelves, S&F new wire mesh (Jali) shelves made out of 3mm dia MS rods duly welded to its position.Complete all as directed and shown on drawing.

Removing old UNSV shoes,Supply and fix new PVC shoe suitable to each leg .complete all as directed and as shown on drawing.

Continous gas welding to all broken joints of table in length of 1 cm

Material and labour for painting shoe rack steel by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete shoe rack.The painting to each article shall only be carried out by spray machine only.

Material and labour for painting to articles of steel furniture by adhering to following steps:- a) The existing surface of each steel article shall be made smooth by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it again to make the surface smooth then wipe out the surface and remove the dust with a fine cloth.Two coats of synthetic enamel paint as per existing shade in each item shall be applied externally and internally to each article after applying and drying one coat of metal primer. b) The painting to each article shall only be carried out by spray machine only. c) The work will be excecuted at various units locations/residential accn or inside/outside restricted area as per user requirement.

Almirah Large Steel, FD-83

Book Case steel with glass door, FD-1028, TP

Filing Cabinet Steel with four drawer, TP

Medium Duty Rack Steel, TP

Metal Shelving Rack adjustable of size 8' x 3' x 1.8' closed type, TP

Rack Pigeon hole steel

Rack Side steel with tray 3 spaces, FD-97 (M)/1023

Rack Steel 6 tier, FD-1038 / 106 (M)

Stool Steel 305 x 305 x 610mm, FD-81 (M)

LEO ENTERPRISES