Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.0 LAccepted-AOC 487 A 1 GOPAL MISHRA ROAD BEHALA KOLKATA 700034 | KOLKATA | WEST BENGAL | 700034 | ₹4.0 L | L1 | Accepted-AOC L1 |
| 2 | L2₹4.2 L+₹20,459 (5.12%)Rejected-Finance 159 KAILASH GHOSHI ROAD KOLKATA WEST BENGAL 700008 | KOLKATA | KOLKATA | WEST BENGAL | 700008 | ₹4.2 L+₹20,459 (5.12%) | L2 | Rejected-Finance L2 |
| 3 | L3₹4.2 L+₹24,779 (6.20%)Rejected-Finance 112 21 A 2 K N MUKHERJEE ROAD P O TALPUKUR BARRACKPORE 24 PGS N | 24 PARAGANAS NORTH | WEST BENGAL | 700028 | ₹4.2 L+₹24,779 (6.20%) | L3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | MIK ENTERPRISES L3 | POWER INDIA L2 | STAR ENTERPRISE L1 |
|---|---|---|---|---|---|---|
| 1.00 | Dismantling, repairing, rewinding & overhauling of the 415V, 50 Hz, 3-ph, 11.8 KW Non-clog sewage Submersible Pump Motor Set (KSB make) including replacement of damaged components like casing wearing ring, impeller nut, bearing lock nut, mechanical seal (SIC VS SIC), bush for seal housing, rotor key and rotor lock nut, impeller key etc followed by testing and commissioning of the pump-motor set with trial run for a period of 03 days as per direction of EIC. | 1 | Job | 1,08,324 ₹1,08,324 | 1,07,222 ₹1,07,222 | 1,02,000 ₹1,02,000 Lowest |
| 2.00 | 3C Flat water proof CU.cables lSI marked-IS 694 3C X 6.0 Sq.mm | 20 | Mtr | 441 ₹8,820 | 436 ₹8,720 | 415 ₹8,300 Lowest |
| 3.00 | Supply and delevery of 150 mm dia P.V.C.Flexible Hose pipe, lSI marked -IS 15265. | 90 | Mtr | 2,177 ₹1,95,930 | 2,155 ₹1,93,950 | 2,050 ₹1,84,500 Lowest |
| 4.00 | GI. Holding Clamp- IS 1239, Galv- IS4736. 150 mm dia. | 3 | Pair | 3,770 ₹11,310 | 3,732 ₹11,196 | 3,550 ₹10,650 Lowest |
| 5.00 | 90 degree G.I Bend (both end flanged) ISImarked-IS 1239, Galv- IS4736. 150 mm dia. | 2 | No | 9,770 ₹19,540 | 9,671 ₹19,342 | 9,200 ₹18,400 Lowest |
| 6.00 | Supply of E.R.W.M.S. (Electrical Resistant Welded M.S.) black pipe of ISI Mark as per relevent IS Specification (heavy quality) having wall thickness not less than 5 mm. [N.B.: The rates for supply of TATA Make pipe will be arrived at by adding 20% of the corresponding rates ] Diameter in mm (Internal): 150 mm | 10 | Metre | 1,540 ₹15,400 | 1,524 ₹15,240 | 1,450 ₹14,500 Lowest |
| 7.00 | Gas cutting of M.S. pipes and/or M.S. plates of different thickness all complete as per specification and direction of the Engineer-in- charge. Thikness in mm 5mm to 8mm thick plate. | 4 | Metre | 267 ₹1,068 | 264 ₹1,056 | 251 ₹1,004 Lowest |
| 8.00 | Supply of M.S. Flange (slipper type) as per IS-6392 TABLE 17 Thickness -20mm -22mmNB Diameter in mm : 150 mm . | 8 | Each | 1,306 ₹10,448 | 1,293 ₹10,344 | 1,230 ₹9,840 Lowest |
| 9.00 | Flange joint to C.l./D.l/M.S. pipes and specials including supply of rubber gasket, nuts, bolts, washers etc. of best quality to make the joint watertight at required hydraulic pressure all complete as per specification & direction of the Engineer-in-charge: 150mm dia | 4 | Each | 908 ₹3,632 | 899 ₹3,596 | 855 ₹3,420 Lowest |
| 10.00 | Field welding of M.S. plate by means of electric arc welding as per relevent IS specification using standard electrodes including edge preparation and charges of deployment of electric generator set with fuel, lubricant, and all other tools and plants all complete as per specification and direction of Engineer-in-charge. [ Engineer-in-charge shall approve the electrodes for arc welding before use ]
Throat thickness in mm
5mm to 6m | 5 | Metre | 1,317 ₹6,585 | 1,303 ₹6,515 | 1,240 ₹6,200 Lowest |
Tender Value
Refer Docs
EMD Value
₹8,150
Closing Date
19 Mar 2026, 1:00 pmClosed
Executive Engineer, GAP-II, EM, KMDA
OFFICE OF THE EXECUTIVE ENGINEER (E/M)/GAP-II 1/425, Gariahat Road(s), Kol-68
Repairing, rewinding, overhauling, reinstallation and commissioning of sewage Submersible Pump Motor Set no-1 along with redirection of delivery pipe line and allied works at sludge pump house at Padmapukur WTP (10 MGD) Ph- I under HMC.
2026_KMDA_1016745_1
EE(E/M)/GAP-II/KMDA /2W-15/2025-26/42 Date -27.02.2026
Open Tender
Electrical Work/ Equipment
Item Rate
10 days
Padmapukur
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹8,150
Office of the Executive Engineer, GAP-II, EM, KMDA
31 Aug 2026
13 Mar 2026
23 Mar 2026
13 Mar 2026
19 Mar 2026
13 Mar 2026
16 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling, repairing, rewinding & overhauling of the 415V, 50 Hz, 3-ph, 11.8 KW Non-clog sewage Submersible Pump Motor Set (KSB make) including replacement of damaged components like casing wearing ring, impeller nut, bearing lock nut, mechanical seal (SIC VS SIC), bush for seal housing, rotor key and rotor lock nut, impeller key etc followed by testing and commissioning of the pump-motor set with trial run for a period of 03 days as per direction of EIC. | - | Job | - | - |
| 2 | 3C Flat water proof CU.cables lSI marked-IS 694 3C X 6.0 Sq.mm | - | Mtr | - | - |
| 3 | Supply and delevery of 150 mm dia P.V.C.Flexible Hose pipe, lSI marked -IS 15265. | - | Mtr | - | - |
| 4 | GI. Holding Clamp- IS 1239, Galv- IS4736. 150 mm dia. | - | Pair | - | - |
| 5 | 90 degree G.I Bend (both end flanged) ISImarked-IS 1239, Galv- IS4736. 150 mm dia. | - | No | - | - |
| 6 | Supply of E.R.W.M.S. (Electrical Resistant Welded M.S.) black pipe of ISI Mark as per relevent IS Specification (heavy quality) having wall thickness not less than 5 mm. [N.B.: The rates for supply of TATA Make pipe will be arrived at by adding 20% of the corresponding rates ] Diameter in mm (Internal): 150 mm | - | Metre | - | - |
| 7 | Gas cutting of M.S. pipes and/or M.S. plates of different thickness all complete as per specification and direction of the Engineer-in- charge. Thikness in mm 5mm to 8mm thick plate. | - | Metre | - | - |
| 8 | Supply of M.S. Flange (slipper type) as per IS-6392 TABLE 17 Thickness -20mm -22mmNB Diameter in mm : 150 mm . | - | Each | - | - |
| 9 | Flange joint to C.l./D.l/M.S. pipes and specials including supply of rubber gasket, nuts, bolts, washers etc. of best quality to make the joint watertight at required hydraulic pressure all complete as per specification & direction of the Engineer-in-charge: 150mm dia | - | Each | - | - |
| 10 | Field welding of M.S. plate by means of electric arc welding as per relevent IS specification using standard electrodes including edge preparation and charges of deployment of electric generator set with fuel, lubricant, and all other tools and plants all complete as per specification and direction of Engineer-in-charge. [ Engineer-in-charge shall approve the electrodes for arc welding before use ]
Throat thickness in mm
5mm to 6m | - | Metre | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.37 MB
BOQ_2497902.xls
BOQ • 0.33 MB
Form.pdf
Tender Documents • 0.66 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .