REPAIRS TO JOINERY,FLOORING,SUNKEN FLOOR OF KITCHEN/TOILETS, PLASTERING,PLUMBING,SANITARY FITTINGS, ETC AT DAD RESIDENTIAL COMPLEX,PAOAOC,PAO(ORs)EME,CDA OFFICE AREA UNDER AGE B/R(S)NO I OF GE(S)SECUNDERABAD

Amount

Demolition of cement concrete (un-reinforced ) in ground floors and pavings not exc 15cm thickness (below or above ground level ) .

M&L for 75mm thick plain cement concrete in (1:3:6) type C1 (using 20 mm graded stone aggregate) as in plinth protection finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for 40 mm thick for PCC (1:2:4) type B0 (using 20 mm graded stone aggregate) as in flooring finished even and smooth using extra cement .

S&F for Glass dividing strips, 3mm and width of strip 38mm complete all as specified and as directed.

M&L for 25 mm thick plain cement concrete 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) as in floors complete all as specified and directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for 10mm thick vitrified light shade polished ceramic tiles,area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for 18 to 20mm thick black Granite (of any type) work (table rubbed and polished) in steps, jambs,pillars, window-cills, cooking plat-forms and like in cement mortar (1:4) incl pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite incl screed bed or bedding layer of mortar 20mm thick in cement mortar 1: 6 for laying floor finishes complete all as specified and as directed.

Rounding to edges of stone slabs one edge such as in slepps cooking platform and other similer shine

Dismantling floor hearth wall tiling including cement mortar bedding (but not backing) including rubbish off the premises complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles of size 200x300x6mm wall tiles set and jointed in neat cement and in white/coloured cement to match with the colour of tile over 10 mm thick plaster in CM 1:4 as in skirting / dados etc, complete all as specified and as directed.

M&L for 10mm thick vitrified light shade polished ceramic tiles,area of each tile exceeding 0.36 sqm but not exceeding 0.42sqm, in skirtings/ dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick cement plaster backing coat in CM 1:4 complete all as specified and as directed.

Taking down plastering in cement mortar on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc

M&L for rendering 15mm thick on fair faces of brick works in cm 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5 mm thick on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even without using extra cement incl mixing of water proofing compound complete all as specified. (Note: Water Proofing compound shall be measured and paid for separately)

Supply only integral water proofing compound.

M&L prepartion of new surfaces on walls and applying two coats of oil bound distemper over a coat of primer with applying wall care putty in two coats complete all as specified and as directed.

M&L perpartion of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

M&L prepartion of new plastered surfaces and three coats of white wash on wall complete all as specified and directed.

M&L preparation of surfaces over a coat of priming paint and applying two coats of cement base paint on new plastered surfaces of wall complete all as specified and directed

M&L for making good of the fallen/broken portion of the RCC Roof/Ceiling with proper reinforcement binding & application of antifungal paint for avoiding rusting of old steel reinforcement complete all as specified and directed.

Demolition of cement concrete (un-reinforced ) exceeding 15cm thickness but above ground floors and similar works such as in sunken floor etc complete all as specified and as directed.

M&L for plain cement concrete 1:5:10 type E-2 (using 40 mm graded stone aggregates) as in floor filling complete all as specified and directed.

Rendering 15mm thick in CM 1:3 using water proofing compound as per manufacture instruction finished even and smooth with out using extra cement as in sunken floor complete all as specified and as directed. (Note: WPC will be measured and paid separately)

M&L for providing water proofing felt having glass fibre non woven reinforcement and weighing 3 to 4 kgs /Sqm in 100 mm overlaps both longitudinally and transversely by torch bonding over coat of hot blown bitumen 85/25 at the rate of 1.2 kgs per sqm as in sunken floor ( bottom and vertical surfaces ) complete all as specified and directed

Dismantling water tanks exc 250 and n exc 500 Ltrs capacity of any type or size complete all as specified and directed.

Dismantling water tanks exc 500Ltrs but n exc 1000 Ltrs capacity complete all as specified and directed.

S&F 500 Litres Capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including PTMT ball valve high pressure of 20mm complete all as specified and directed.

S&F 1000 Litres Capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including PTMT ball valvehigh pressure of 20mm complete all as specified and directed.

S&F in repairs 20 mm dia Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed all as specified and directed. (Min Wt 20mm- 210 gms)

S&F in repairs 20mm dia Gun metal globe or gate valves high pressure with polythene float and fly nut complete screwed for iron pipe or for unions complete all as specified and directed.

S & F 15mm bore steel tubing galvanised, medium grade with all fittings, laid in floors or fixed to walls including taking down old GI pipes complete all as specified and as directed.

S & F 20mm bore steel tubing galvanised, medium grade with all fittings, laid in floors or fixed to walls including taking down old GI pipes complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet (pedestal pattern) with plastic seat and cover including PVC low level flushing cistern 10 ltrs capacity,flush pipe of polythylene of low or high density or PVC 32 mm dia , PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in Repairs Vitreous china wash hand basin white flat back size 550x400mm including brackets, 15mm CP pillar cock , CP waste fittings 32mm, including PVC 32mm dia waste pipe of length 1.20 mtr complete all as specified and directed.

S&F in Repairs Vitreous china orrisa pan squatting pattern 580 X 440mm with integral foot rests including P or S trap, PVC low level flushing cistern 10 ltrs capacity complete all as specified and directed.

S&F in repairs10 litres capacity PVC low level flushing cistern white , with inlet ball valve , float and handle including brackets , Flush pipe of polythylene of low or high density or PVC 32 mm dia , PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in Repairs Plastic water closet seat cover, white closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device (Make : Hindware/Jaquar)complete all as specified and as directed.

S&F in repairs brass chromium plated health faucets (Make : Hindware/Jaquar) complete all as specified and directed.

S&F in repairs 125 mm dia brass chromium plated shower rose with swivel joints complete all as specified and as directed.

S&F in Repairs 15mm dia fancy type Pillar taps brass chromium plated screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly–nuts, screwed iron pipe complete all as specified and directed.

S&F in Repairs 15mm dia fancy type bib taps CP brass chromium plated with capstan head, screwed down, screwed iron pipe complete all as specified and as directed.

S&F in Repairs 15mm dia Stop valves,brass chromium plated, fancy type with capstan head screwed down, high pressure, screwed both ends iron pipe or for unions complete all as specified and directed.

S & F in Repair 15 mm dia stop valves brass chromium plated with long shank (concealed), screwed both ends for iron pipe complete all as specified and as directed.

S&F in Repairs 15mm dia angular stop valve brass chromium plated screwed iron pipe complete all as specified and as directed.

S&F in repairs Tubular Towel rail 20mm dia, D type, 60cm long between flanges of brass chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and as directed.

S&F in repairs 20mm dia aluminium anodised tubular curtain rod with brackets complete all as specified and as directed.

S&F in repairs 32 mm dia waste coupling of PTMT(Half or Full thread) complete all as specified and as directed.

S&F in repairs PVC connection pipe 15 mm size PTMT nut 600 mm long complete all as specified and as directed.

S&F in repairs 32mm dia PVC waste pipe of 1.20 mtr long for wash hand basin of pressure rating 10 kgf/Sqm complete all as specified and as directed.

S&F in repairs 40mm dia PVC waste pipe of 1.20 mtr long for sink of pressure rating 10 kgf/Sqm complete all as specified and as directed.

S&F 75mm diaPVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

Demolition and breaking up drain AC pipes/PVC pipe set in cement mortar of any size complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed , in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed , in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F 110mm dia PVC (SWR) bends complete all as specified and asdirected.

S&F 75mm dia PVC (SWR) bends complete all as specified and as directed.

S&F in Repairs bathroom cabinet with door (size 400mm x 500 mm) fitted with looking mirror Make : Prayag complete all as specified and as directed.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchan or laboratary with pluges washer and wastes including bedding in cement mortar to drawf wall or including fixing cantiliver brackets and connecting union to pipes overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.

S&F in repairs for stainless steel plate rack of size 900x900mm of approved make and quality complete all as specified and as directed.

S&F in repairs 15mm bib tap standard of PTMT any colour high pressure screwed for iron pipe (Min Wt 15mm- 90 gms) complete all as specified and as directed.

S&F in repairs 15mm pillar tap of PTMT any colour high pressure screwed for iron pipe (Min Wt 15mm- 110 gms) complete all as specified and directed.

Cleaning of RCC/PVC water tanks with bleaching powder disconnecting the connection & removing all scales and dirt etc fromtanks & from mouth of circulating pipes etc including writing with paint out side tanks " tank cleaned on with month and year " capicity of tanks exc 750 & n exc 1000 ltrs and recconneting ,air lock complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherewise specifically provided for as in sunken floor, roof incl tarfelt etc complete all as specified and as directed.

Taking down existing water proofing treatment with tarfelt including cement plaster from roof including parapets etc., and removing the debris to a distance not exceeding 250m complete all as specified and as directed.

M&L for 40mm thick plain cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in padding (level course) on roof finishinf cement concrete surfaces even & smooth without using extra cement complete all as specified and as directed by Engr-in-charge.

M&L for rendering 10 mm thick in CM (1:3) using water proofing compound as per manufacturer instruction as in roof and chajjas finishingcement concrete surface even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. Note : Water proofing compound will be measured and paid separately.

M &L for priming plastered roof surfaces with bituminous primer @ 0.3 Kg/Sqm as per IS 3384 and providing water proofing treatment by applying 3.5 Kg/Sqm Actatic polypropylene (Advanced APP torch on membrane mineral finish) having polyester film reinforcement stabilized with fibre glass and finished on top with grey mineral slabs torch on system of thickness 3 mm by torch bonding complete all as specified and as directed by Engr-in-Charge.

M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

M&L for plain cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) as in roof kerbs, tank stagging and similar works etc complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each including steel windows etc complete all as specified and as directed.

M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions complete all as specified and as directed.

M&L for Factory made solid panel laminated PVC door shutter 30mm thick (style) consisting of frame made out of M.S tube for top & bottom rails. M.S Srame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing complete all as specified and as directed.

S&F 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin type C-21 anodised and fixed complete all as specified and as directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section with bolt, all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) exceeding 1.5 Sqm but n exc 4.00 sqm each incl steel windows etc complete all as specified and directed.

S&F steel windows with pressed frame including side hung double shutters on both sides to receive glass on one side shutters and to receive guaze on other side shutters including hinges with steel handle on both side shutters and steel peg stay, complete with glazing bars, dovetailed or welded including making good distrubed portion of wall complete all as specified and directed.

S&F Steel ventilators with top hung/ side hung shutter including hinges, steel peg stay, including one coat of zinc chrome primer, including making good distrubed portion of wall complete all as specified and directed.

S&F for Mild steel framed work such as grills, guard bars, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

M&L preparation of new steel surface of any description over 10 cm width and girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L preparation of new steel surface of any description over 10 cm width and girth and applying two coats of synthetic enamel paint over a coat of red oxied primer complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins or spring clips and providing and fixing new clips or pins complete all as specified and directed.

M&L 3mm thick for sheet glass ordinary quality fitted with beeding/putty n.exc 0.5 sqm each complete all as specified and as directed.

M&L for sheet glass ordinary quality 4 mm thick fitted with beeding/putty n.exc 0.5 sqm each sheet glass is ground or obscured or frosted, on one side and fixed complete all as specified and as directed.

S&F in repairs for galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm but n exc 2 sqm each complete all as specified and as directed.

Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,incl filling hollow of frame with plain cement concrete type B0 (1:3:6 )(using 12.5mm graded aggregate etc complete all as specified and as directed.

Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate incl filling hollow of frame with plain cement concrete type B0 (1:3:6 )(using 12.5mm graded aggregate ,etc complete all as specified and as directed.

S&F for Factory made 35mm thick 2nd class hard wood, plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F Factory made 35mm thick 2nd class hard wood factory made glazed and skeleton shutters open rebated and prepared to receive glass/gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass and gauge complete all as specified and as directed.

S&F 35 mm thick flush shutter ,solid core construction ,with block board core and plywood face panels ,commercial type complete all as specified and directed.

S&F for galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and as directed.

S&F 100mm long Mild Steel butt hinges medium weight cold rolled mild steel etc all as specified and as directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section with bolt, all as specified and as directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed.

S&F 300mm long ordinary rat tail rod pattern spring incl roller and plate complete all as specified and as directed.

S&F 150mm long aluminium handles fabricated type, anodised, complete, all as specified and as directed.

S&F in repairs150mm long floor door stopper of aluminium alloy body complete all as specified and as directed.

M&L preparation of new wooden or wood based surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

M&L in Repairs 2nd class hard wood plain fillets, square, rectangular in section wrought screwed with nails area exceeding 13 sqcm but n exc 25 sqcm complete all as specified and as directed.

M&L in Repairs for prelaminated particle board of 18/19mm thick interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with timber frame work of cupboards book cases etc complete all as specified and as directed.

S&F hasp & staple 100mm size aluminium anodised fixed with screws.

S&F continous (Piano) hinges, mild steel, bright finished or electrogalvanised width of flaps in 30mm complete all as specified.

S&F in repairs 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished of approved quality complete all as specified and directed.

M&L for uprooting of wild trees such as grass/bushes etc from the roof / wall surfaces / AC sheets/soil pipes surrounding including its penetrated roots with suitable cleaning chemical and making good to the damaged plaster by providing CM 1:3 and finish the surfaces to match with the existing surface complete all as specified and as directed.

NARAYANA CONSTRUCTIONS

MAHALAKSHMI INFRA PROJECTS

Vara Enterprises

M/S V PRATAP REDDY

ATUL ENTERPRISES

S.R.M.K Enterprises

SAI RUPA CONSTRUCTIONS