Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.0 CrAccepted-AOC | ₹11.0 Cr | L1 | Accepted-AOC l1 |
| 2 | L2₹11.2 CrRejected-Finance SHASTRI NAGAR SAHARANPUR | SAHARANPUR | UTTAR PRADESH | 247001 | ₹11.2 Cr | L2 | Rejected-Finance L2 |
| 3 | L3₹11.4 CrRejected-Finance GRAM POST MAWANA KHURD MAWANA MEERUT | MEERUT | UTTAR PRADESH | 245206 | ₹11.4 Cr | L3 | Rejected-Finance L3 |
| 4 | L4₹12.0 CrRejected-Finance | ₹12.0 Cr | L4 | Rejected-Finance L4 |
Tender Value
₹12.5 Cr
EMD Value
₹25 L
Closing Date
17 Feb 2021, 4:00 pmClosed
superintending engineer pwd saharanpur
superintending engineer pwd saharanpur
Widening and strengthening the route from Delhi-Yamanautri road to Muzaffarnagar border via Nanouta and Jadauda Panda.
2021_CEMRT_552763_1
7266/96MS-S/2020 Date 23-12-2020
Open Tender
Civil Works
365 days
saharanpur
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,714
₹25 L
30 Sept 2021
8 Feb 2021
18 Feb 2021
8 Feb 2021
17 Feb 2021
8 Feb 2021
Amount
Dimantling brick work or stone work in lime or cement mortar and including stacking of materials as directed be the Engineer-in-charge within a distance of 60 meter (200 feet) complete excluding GST. (SI. No. 692)
Dismantling reinforced cement concrete or reinforced brick work including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet) complete excluding GST. (SI. No. 694)
Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m complete excluding GST.
Mechanically compected to achieve 95% proctors density including arrangement of water, settlement and all T&P including roller and its fuel etc complete excluding GST. (SI. No. 260 (a))
Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, from a lead minimun three km. spreading, grading to required slope and compacting to meet requirement of table 300-2 complete excluding GST.
Construction of granular sub-base by providing grading -1 material in uniform layers with motor grader on prepared surface by mix in place method with rotavator at OMC, & compecting with vibratory roller to achieve the desired density, complete as per Clause 401 complete excluding GST.
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete excluding GST.
Providing, laying, spreading and graded stone aggregate (WMM) after mixing with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying with 1% OPC cement and 3.5% Emulsion (SS2) in uniform layers on sub base / subgrade and compacting with the road roller to achieve the desired density complete excluding GST.
Providing & applying Tack coat with V.G.-10 on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.25kg/Sqm. On the prepared Bitumen/ granular surface clieaned with mechanical broom complete excluding GST.
Providing & laying Bituminious Concrete with 60-90TPH batch type hot mix plant producing an average output of 75 tonne per hour using crushed aggregates of specified grading, premix with bituminous binder @ 5.4 Per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, lever and alignment, rolling with smooth wheeled vibratory and tandom roller to achieve the desired compaction as per MORTH Specification clause 509 complete excluding GST.
Cement Concrete with 4 cm gauge approved stone grit, coarse sand & cement in the proportion of 6:3:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work complete excluding GST. (SI . 279 (b))
Plain/Reinforced Cement Concrete in super structure complete as per Drawing and Technical Specifications. complete excluding GST. (R.C.C. Grade M-25)
Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications complete excluding GST.
Supply & laying of 100mm thick Precast cement concerete I-Shape' Interlocking paver blocks ISI mark confirming to IS: 15658-2006 with top layer of minimum 5 mm thickness having plan dimension 200x(160+120mm) of O.P. Cement , smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro-compression mechanism. The compressive strength of concrete paver block shall not be less than 50Mpa and weight 5 kg per including cost of material, with a blanket layer of 4.00cm. thick fine sand. including labour, T & P etc required for proper completion of the work as directed by Engineer-in-charge excluding GST. (Ch. 20 New It.15)
M-150 Brick work in in 1:4 (One cement & Four coarse sand) mortar in foundation and plinth including supply of all materials labour, Tools & plants etc. required for proper completion of the work excluding GST. (SI. No. 305 (a) )
12 mm thick plaster with cement and fine sand of 1.25 fineness modulus in 1:4 over brick work minimum thickness not to be less than 1 cm including supply of all materials, labour, tools & plants etc required for proper completion of the work excluding GST. (SI. No.584)
2.5 cm thick Damp Proof Course with Cement and approved coarse sand 1:2 with and including water proofing compound (1 Ltr. to 1 bag of cement of 50 Kg.) as ordered by the Engineer incharge in the proportion as specified by the manufacturer including supply of all materials, labour, Tools & plants etc. required for proper completion of the work and including proper curing & shutterings as necessary excluding GST. (SI No 361)
Supply & fixing of NP-3 class 350 mm dia RCC hume pipe (ISI mark) of following diameters including carriage, loading, unloading at site also including cost of hume pipes & collars & all taxes including laying in proper position & joint filling including cost of necessary jute & cement for proper completion of the work excluding GST.
Supply & fixing of NP-3 class 450 mm dia RCC hume pipe (ISI mark) of following diameters including carriage, loading, unloading at site also including cost of hume pipes & collars & all taxes including laying in proper position & joint filling including cost of necessary jute & cement for roper completion of the work excluding GST.
Supply & fixing of NP-3 class 1200 mm dia RCC hume pipe (ISI mark) of following diameters including carriage, loading, unloading at site also including cost of hume pipes & collars & all taxes including laying in proper position & joint filling including cost of necessary jute & cement for proper completion of the work.
Struck pointing with cement mortar consisting of 1 part cement and 2 parts of fine sand of 1.25 Fineness modulus. (SI. No. 574)
(a) Sand filling in plinth and under floor including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering, dressing etc. labour and T&P etc. required for proper complition of the work. saplings of girth upto 30 cms. measured at a height of 1 M. above ground level and removal of rubbish upto a distance of 50 M. out side the periphery of area cleared. including cost of sand complete excluding GST. (S.I. No.255)
M-150 Brick on edge pavement on parties with bricks, laid dry joints filled with local sand including preparation of base to proper slope, and its ramming, spreading layer of 1 cm. (3/8") depth of local sand over the subgrade and including supply of all materials, labour Tools &plants etc. required for proper completion of the work excluding GST. (S.I. No. 763)
Providing and laying boulder apron for bed protection with stone boulders of minimum size and weight as per Table 1300.1, no fragment weighing less than 25 kg laid dry complete as per drawing and technical specifications clause 1301 excluding GST.
Providing and laying of hot applied thermoplastic compound 5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 5.00 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes complete excluding GST. (for repeated bar marking).
Providing& laying of hot applied thermoplastic compound 2-5 mm thic including reflectorising glass beads @ 250 gms per sqm, area, thickness of 2.5 mm exclusive of surface applied glass beads as per IRC 35 The finished surface to be level, uniform and free from steaks and holes complete excluding GST. (As per SOR. Ch. 27 SI. No. 7 New Item)
SHREE TIRUPATI CONSTRUCTION
amit kumar contractor
Dev Yash Projects and Infrastructure Pvt. Ltd.
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid