General Repair with Replacement of Damaged Parts of Vehicles Tipper and TATA 407 LPT

Amount

Dismantling of 4 wheels (F/R) extracting of worn out parts, cleaning of parts with K oil. P/f of new parts I;e; front wheel brg cotter – 2 nos., front wheel brg inner- 2 nos., rear left wheel brg – 2 nos., rear right wheel brg- 2 nos., front wheel oil seals – 2 nos., rear wheel oil seals – 2 nos., wheel brg grease – 5 kg (pensoil). Also repairs to brake system by P/f of worn out parts such as brake lining sets, with rivets wheel brake shoe – 2 nos cylinder kits etc. Complete job including cost of material and labour charges. (Tipper JK20B -1406)

Repairs to the propeller shaft of the vehicle by way of p/f of U.J cross assy. -01 no., cross holders -02 nos., centre brg. With rubber coupling ( big and small). Also repairs to the steering system of the vehicle by way of replacement of its worm gear, bearing, filling of the steering box oil, gasket joint replacement, job also includes replacement of the rod assys, Complete job including cost of material and labour charges. (Tipper JK20B -1406)

Repair to the gear box of the vehicle by way of its dismantling, repairing by p/f roller bearing, sleeve bearing, synchronizing rings, gear box oil seals, cotter, coupling, twin gear, reverse gear, 2nd gear, gear box joint set, counter shaft, fitting of gears by using hydraulic press. Complete job including cost of material and labour charges. (Tipper JK20B -1406)

Repairs to radiator by flushing upper and lower tanks with caustic soda, soldering its leaking tubes, straightening the fins, replacement of leaking hoses, hose clamps and then reassembling after checking leakage. Also repairs to the fuel system by servicing to fuel tank by cutting and then welding, replacement of fuel pipes, banjo washers, banjo bolts, injector pipes with new ones, calibration of injectors, setting of their pressure on machine. Complete job including cost of material and labour charges. (Tipper JK20B -1406)

Repair to steering by way of P/f of new parts i.e. steering worm wheel -01 No., Steering U-J cross – 01 No., split pin – 02 Nos., spindle pin – 02 Nos., Steering/TQ oil – 500 ml and checking. Complete job including cost of material and labour charges. (Tipper JK20B -1406)

Repair to fuel injection pump include removing of FIP from m/c dismantling it extraction of old damaged parts and P/F of new parts viz:- Nozzles 1set, Feed Pump 1no., Elements 4nos., Delivery Valve 4 nos., Plunger 1set and Calibration of Pump etc. The job includes labour charges etc. (Tipper JK20B -1406)

Labour charges for repairs to operator seat by way of using iron G.I sheets and p/f of rexgine, cushion cover etc. including stitching charges also and repairs to back by way of welding and fitting of nuts and bolts also, the job includes cost of angle iron. (Tipper JK20B -1406)

Providing and filling of Differential Oil – 18 Ltrs, M- Oil – 08 Ltrs, Hydraulic Oil – 10 Ltrs, Gear Oil – 17 ltrs and Jack Oil – 05 Ltrs by way of draining out of the used oil and refilling with the new oil of various grades. Repairs to the machine by way of replacement of the old/worn out parts namely Fuel filter – 01 set, Air Filter – 01 Set, M-oil Filter – 01 Set, Hydraulic Filter – 01 Set. The job includes cost of material, skilled labour charges, carriage, transportation, turning inclusive of all taxes as applicable. (Tipper JK20B -1406)

Periodic servicing of the Suction Machine TATA-407 LPT, JK20B – 1424 by way of Providing and Fitting of Fuel Filter set– 01no., M oil Filter – 01no. Job also includes Providing and Filling of M-oil – 06 Ltrs., Gear Oil – 10 Ltrs. P/F of suction pipe 3” diameter – 50 meter etc. The job includes the cost of the rubber material, nuts and bolts with washers and labour charges for the complete work

P/F of new Battery 17V 21Plate 150 AH of the Suction Machine TATA-407 LPT, JK20B – 1424 by replacing old one, extraction of old damaged wire, Thimbles, Terminals and Battery lead 15”, The job includes the cost of the rubber material, nuts and bolts with washers and labour charges for the complete work

Repair to tie rod and king pin assembly of the Suction Machine TATA-407 LPT, JK20B – 1424 by way of dismantling and extraction of worn out parts and replacement by way of P/f of new parts King pin – 02 Nos., King pin bush – 04 Nos., King pin bearings – 02 Nos., Arm bolt – 01 No., Spacer – 02 Nos., Shims – 02 Nos., O-ring – 02 Nos., King pin lock – 02 Nos., Tie rod end (LH & RH) – 01 set, Tie rod end repair kit – 01 set, King pin repair kit – 01 No., along with alignment of wheel and checking. The job includes the cost of the rubber material, nuts and bolts with washers and labour charges for the complete work

VEE AUTO TRADERS

R K ELECTRICAL MECHANICAL ENGINEERING AND FABRICATION WORKS