CRC-GCTRD-137-PMGSY-Cell

Amount

A.Civil Works(DSR Item) : Demolishing brick work manually by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in-charge.15.7.4. In cement mortar.

Dismantling aluminium / Gypsum partitions , doors , windows , fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material within 50 metres lead as directed by Engineer-in-charge.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.15.23.2 For thickness of tiles above 25 mm and upto 40 mm.

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Brickwork with common burnt clay F.P.S. (non modular ) bricks of class designation 7.5 in foundation and plinth in : 6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with common burnt clay F.P.S.(non-modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V level.6.13.2 Cement mortar 1:4(1 cement : 4 coarse sand)

15 mm cement plaster on rough side of single or half brick wall of mix : 13.5.1 1:4(1 cement : 4 coarse sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : 4.1.5 1:3:6 (1 cement: 3 coarse sand(zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources.

Reinforced cement concrete work in walls (any thickness) , including attached pilasters , buttresses,pilnth and string courses , fillets , columns , pillars , piers , abutments , posts and struts etc . above plinth level upto floor five level , excluding cost of centering , shuttering , finishing and reinforcement : 5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 20% :3 graded stone aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA) upto 20%.

Steel reinforcement for RCC work including straightening ,cutting , bending , placing in position and binding all complete above plinth level . 5.22A.6 Thermomechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting , propping etc. and removal of form for : 5.9.5 Lintels , beams , plinth beams , girders , bressumers , and cantilevers.

Providing and fixing MS grills of required pattern in frames of windows etc. with MS flats , square or round bars etc. including priming coat with approved steel primer all complete . 9.48.2 Fixed to openings / wooden frames with rawl plugs screws etc.

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part-I) decorative type , core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 9.20.2 30 mm thick including ISI marked stainless steel butt hinges with necessary screws.

Providing and fixing double glazed hermetically sealed gazing in aluminium windows , ventilators and partition etc. with 6 mm thick clear float glass both side , having 12 mm air gap , including providing EPDM gasket , perforated aluminium spacers , desiccants , scalant (Both primary and secondary sealant) etc. as per specifications , drawings and direction of Engineer -in-charge complete.

Providing and fixing 18 mm thick , 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I , IS:3087 marked , including top cover of 6 mm commercial ply wood conforming to IS:303 BWR grade , nickelplated M.S. pipe 20 mm dia (heavy type) curtain rod with nickel plated brackets , including fixing with 25x3 mm MS flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelemt and rawl plugs 75 mm long etc. all complete.

Supplying and fixing rolling shutters of approved make , made of required size M.S. laths , interlocked together through their entire length and jointed together at the end by end locks , mounted on specially designed pipe shaft with brackets , side guides and arrangements for inside and outside locking with push and pull operation complete , including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wires of adequate strength conforming to IS:4454 -part I and MS top cover of required thickness for rolling shutters.

Providing and laying vitrified tiles in different sizes(thickness to be specified by manufacturer) with water absorption less than 0.08% and conforming to IS 15622 , of approved brand and manufacturer in all colours & shade , in skirting , riser of steps , laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS:15477 in average 6 mm thickness , including grouting of joints.

Providing and laying vitrified tiles in different sizes(thickness to be specified by manufacturer) with water absorption less than 0.08% and conforming to IS 15622 , of approved make , in all colours & shade , in skirting , riser of steps , over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc.

Providing and laying rectified glazed ceramic floor tiles of size 300 mm x 300 mm or more (thickness to be specified by the manufacturer ) , of 1st quality conforming to IS : 15622 , of approved make , in all colours , shades , except white , Ivory , Grey , Fume Red Brown , laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) , jointing with grey cement slurry @ 3.3 kg/sqm including jointing with white cement and matching pigments etc. complete.

Providing and fixing false ceiling at all heights including providing and fixing of framework made of special sections , power pressed from M.S. sheets and galvanised with zinc coating of 120 gms / sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick thick with flanges of 27 mm and 37 mm at 1200 mm centre to centre , one flange fixed to the celing with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 1 mm , of approved brand and manufacturer , over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Water thinnable cement primer : Finishing walls with 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004 , alkali & fungal resistancee , dirt resistance exterior paint of required shade (Company Depot tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Providing wood work in frames of doors , windows , clerestory windows and other frames , wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) 9.1.2 salwood

38 mm thick wood block flooring of first class teak wood laid over 25 mm thick levelling layer of cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10 mm nominal size to be paid separately , coated with athin layer of hot bitumen penetration 80/25 (blown type) @ 2.45 kg per sqm , including fixing blocks in position .

Providing and fixing to existing door frames 24 mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 59 x 24 mm and wall thickness 2 mm (0.2 mm) with inbuilt edging on both sides.

Providing and fixing 12 mm thick panelling and glazing in panelled or panelled and glazed shutters for doors , windows , clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured).

Providing and fixing 25 mm thick shutters for cupboard etc. Panelled or panelled & glazed shutters .

Steel work in built up tubular (round , square or rectangular hollow tubes etc.) trusses etc. including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer , including welding and bolted with special shaped washers etc. complete . Hot finished welded type tubes.

Providing corrugated GS sheet roofing including vertical / curved surface fixed with polymer coated J or L , hooks , belts and nuts 8 mm diameter with bitumen and GI limpet washers or with G.I.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes , channels , plates etc. including welding , grinding , buffing , polishing and making curvature and fitting the same with necessary stainless steel nuts and bolts complete.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer(having brand logo with ISI , IS :3564 , embossed on the body , door weight upto 35 kg and door width upto 700 mm.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc.complete.

Sanitary & W/S works :- Providing and fixing floor mounted , white vitreous china single piece , double traps syphonic water closet of approved brand / make , shape , size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system .

Providing and fixing PVC low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231 with all fittings and fixtures complete.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing citern. Range of two urinal basins with 5 litre white PVC automatic flushing cistern.

Providing and fixing wash basin with CI brackets , 1.5 mm dia CP Brass singlehole basin mixer of approved quality and make.a) white vitreous China Wash Basin size 550 x 400 mm

Providing and fixing PTMT pillar cock of approved quality and colour 15 mm nominal bore , 125 mm long foam flow

Providing and fixing CP brass long nose bib cock of approved quality conforming to IS standards . 15 mm nominal bore

Providing and fixing CP brass stop cock (concealed) of standard design and approved make conforming to IS :8931 15 mm nominal bore

Proviidng and fixing Chlorinated Polyvinyl Chloride pipes , having thermal stability for hot and cold water supply including all CPVC plain & brass threaded fittings .

Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 Type-A , including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes

Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 Type-A , including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion . 12.42.3 Single tee with door

Providing and fixing CP brass shower rose with 15 or 20 mm inlet.

Providing and fixing mirror of superior glass and of required shape and size with plastic moulded frame of approved make and shape with 6 mm thick hard board backing.

Providing and fixing PTMT soap dish holder having length of 138 mm , breadth 102 mm , height of 75 mm with concealed fitting arrangements , weighing not less than 106 gms.

Providing , fitting and fixing CP towel rail complete as directed and specified. 450 mm long towel rail with total length of 495 mm , 78 mm wide and effective height of 88 mm , weighing not less than 170 gms.

Providing and fixing 600 x 120 x 5 mm glass shelf with edges round off , supported on anodised aluminium angle frame with CP brass brackets and guard rail complete fixed with 40 mm long screws , rawl plugs etc. complete.

Providing and fixing toilet paper holder Vitreous china

Non DSR Items : Providing and fixing flush door shutters of 40 mm thickness made of with 19 mm Green Ply & 1 mnr thick Laminate on the both the faces with all necessary fittings etc. complete as directed.

Supplying ,fitting and fixing Johnson Zebra Roller Blinds(Combi Blackout) make and shade , design as per choice complete as specified and directed by the department at all levels .

Providing fitting and fixing of panelling in columns , walls , doors windows frames upto ceiling level where necessary with 19 mm thick plywood board and pasting .

Supplying , fitting and fixing of 12 vmm thick toughened glass for door and fixed glass with overhead panel (size 2.4 m x 1.2 m) along with GEZE floor spring GEZE handle 300 mm patch , floor locks .

Providing and placing custom mde cabinet made of 12 mm thick , MRB board(Green/century/Archid or equivalent) and finishing with 1 mm thick laminate.

Providing and fixing fabric backing commercial grade wall of Texdoor make of approved shade with recommended adhesive of approved make which have 100% fire retardant properties as per the manufacturer specification and direction of the department.

Providing and fixing table for Superintending Engineer , Executive engineer made up of 19 mm solid ply along with laminate 1.5 mm thick finish finish and hardware fittings as specified by the department.

Providing and fixing table for Assistant Engineer made up of 19 mm solid ply along with laminate 1.5 mm thick finish and hardware fittings as specified by the department.

Providing & fixing table for Office Assistant / work station made up of 19 mm solid ply along with laminate 1.5 mm thick finish and hardware fittings as specified by the department.

Supplying High back 5 castor chassis with Nylon castors multi locking synchronised mechanism , adjustable polyurethane armests moulded ABS seat & back cover moulded PU foam as specified and directed by the departmemt.

Supplying mid back fixed black cantilever base chassis fixed silver epoxy armrest , ABS seat & back covers moulded PU foam back & seats etc as spoecified and directed by the department.

M/S CAPITAL OVERLAYS (BID ID -277073)