PROVN OF TOILETS NEAR BLDG NO P 21CSD SPL REP TO SECURITY BDY WALL BEHIND BLDG NO P 66 AND WIDENING OF RD TO 7.5 MTRS FROM P 14 TO P 16 OF SEWAR FORT AT BHARATPUR MIL STN

Amount

Surface dressing n exc 15 cm deep and getting out In soft/ loose soil complete all as specified.

Excavating over areas, n exc 1.5 m deep and getting out in soft/ loose soil complete all as specified.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells,cesspits ,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified.

M & L For Cement concrete in foundations, filling and mass concrete PCC (1:4:8), Type D2 (40 mm graded stone aggregate) complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/ loose soil complete all as specified.

Removing excavated material exc. 50m & n.exc 250m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified.

M & L For RCC- M-25 (Design Mix) using 20mm graded stone aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified.

M & L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

All as above item No 9.00, but 6mm to 8mm dia.

All as above item No 9.00 but 5 to 10mm dia in stirrups, spacers & binders.

M & L For RCC- M-25 (Design Mix) using 20mm graded stone aggregate for Column complete all as specified.

M & L Form work for rough finished surfaces of concrete measured flat for Column complete all as specified.

M&L Brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified.

M & L RCC- M-25 (Design Mix) using 20mm graded stone aggregate for beams, cantileveres, bressummers, lintels over 1.5 m span complete all as specified.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels cantilevers, shelves including supports, overhungs etc. also splays between floors and beams etc. as in rough finished surfaces complete all as specified.

M & L For RCC- M-25 (Design Mix) using 20mm graded stone aggregate for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.

M & L Form work for rough finished soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick sloping slab complete all as specified.

M & L Rendering 15mm thick in CM (1:4) finished even and smooth without using extra on fair faces of brick work or concrete surfaces complete all as specified.

M & L For Rendering 5mm thick in CM (1:3) on ceilings complete all as specified.

M&L for Rendering 15 mm thick in CM (1:6) on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing complete all as specified.

S & F powder coted Anodised Aluminium frame for door,windows,vantilators with one or more rebates including joining cleats for fixing etc complete all as specified.

S&F powder coated Anodised aluminium window and ventilators shutters,side hung type without sash bars,aluminium section weighting 0.55 kg/m including necessary joining cleats,glazing clips,rubber packng, anodised aluminium snap beading, screws,anodised aluminium fitting such as peg stays 150mm long 1 nos ,hinges type B-21 100 mm long 02 Nos suitable handle 01 Nos per leaf complete all as specified.

M&L for 4 mm thick plain sheet glass n exc 0.5 sqm in each pane complete all as specified.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F extruded aluminium alloy handle 150mm size fabricated type anodised, ISI marked complete all as specified.

S&F Aluminium anodised barrel tower bolt 150mm long of extruded section and fixed complete all as specified.

S&F 75 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding complete.

M & L Three coats of white wash over Surface of wall including preparation of surfaces complete all as specified.

M & L Three coats of white wash on Ceiling including preparation of surfaces complete all as specified.

M&L for Two coats of Apex Weather Proof Exterior emulsion (Water Based 100% Acrylic ) paint using hand roller over one coat exterior grade wall primer on cement plaster,concrete ,including surface to be painted shall made free from any loose paint ,dust,grease, fungus,algae,moss, shall got be removed .Color & Pattern /Color Combination of the paint shall got approved from GE.

M & L Hardcore (Broken stone or boulders) of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified.

Material and labour for filling sand under floors or in foundation including watering and consolidation including spreading & levelling etc complete all as specified.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L 75 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate in sub base complete all as specified.

M & L Glazed coloured ceramic tiles in vertical surface 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified.

M & L 75 mm thick Plinth Protection PCC (1:3:6) using 40mm graded stone aggregate complete all as specified.

M&L APP based polymeric membrane not less than 3mm thick , weighing not less than 3.5 Kg / sqm , and upper side of membrane thermally insulated with white mineral gravel finish , informly embedded during manufacturing process,shall only be used . It shall be laid by torch application .Side over laps shall be 75 mm and the end shall be 100 mm and all overlaps and joints shall be sealed by torch application including applying a coat of cold applied bitumen primer confirming to IS:3384 @0.40 Kg/Sqm & applied a hot blown coat of bitumin layer spread over primer @ 2.0 Kg/Sqm complete all as specified.

M&L for screed bed or bedding layer of 15 mm thick cement mortar 1:4, for floor finished even & smooth without using extra cement complete all as specified. (mixed with WPC supplied and paid separately) Note:- WPC shall be supplied and paid separately.

Supply only Integral waterproofing compound complete all as specified.

Providing and fixing 20 mm thick gang saw cut, mirror polished, premoulded and prepolished,Granite of any colour and shade machine cut for kitchen platforms, vanity counters, window cills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. rubbing, cutting, moulding and polishing to edges to give high gloss finish etc. complete at all levels complete all as specified.

S&F Toilet paper holder complete all as specified.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

S&F of PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, ISI marked of 110mm bore complete all as specified.

S&F 500 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with 25 mm ball brass valves,high pressure , with polythene float and flynut complete, hoisted and fixed in position all as specified in SSR part-I.

S&F Towel Rack 600mm Long with Lower Hangers, Stainless Steel complete all as specified. (Make;- Jaquar cat part no ACN-1181S or eqv in Perryware , Hindware )

S&F for Corner Glass Shelf (with Bracket Complete all as specified. (Make;- Jaquar cat part no ACN-1173 or eqv in Perryware , Hindware )

S&F Soap Dish Holder complete all as specified. (Make;- Jaquar cat part noACN-1131N or equivalent in parryware/Hindware

S & F 110mm PVC (SWR) vent cowl complete all as specified.

S&F aluminium anodised tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges complete all as specified.

S&F MS chromium plated grating 125mm dia of weight not less than 50gm for floor trap / Nahani trap complete all as specified.

S&F for in Brass Chromium plated central hole basin mixer without popup waste system with with 450 mm long braided hoses complete all as specified. (Make;- Jaquor cat part no QQP-7167BPM 10101 or eqv in Perryware , Hindware )

S&F in viterous china Table Top Basin with CP waste coupling, Size: 565x425x140mm complete all as specified. (Make;- Jaquar Registered design KUS-WHT-35935 or eqv in Perryware , Hindware )

S&F Brass Chromium plated Bib Cock with Wall Flange complete all specified. (Make;- Jaquar cat part no DRC-37037 or eqv in Perryware , Hindware )

S & F 15mm bore angle Cock chromimum plated complete all as specified. Make Jagour ,parryware or equivalent

S & F 20mm bore,Gun metal gate valve painted, finish with forged brass spindle and iron wheel head, screwed both ends internally for iron pipe or for unions and fixed complete all as specified.

S&F for Single piece-WC with UF Soft Close Slim Seat Cover, Fixing Accessories, fccessories set and Dual flush Cistern incl. all Fittings, Size: 370x670x720 mm, S Trap-300mm complete all as specified. (Make;- Jaquar Registered design LYS-WHT-38851S300UFSMN or eqv in Perryware , Hindware )

Providing and fixing in white vitreous china Large ISI Urinal SIze of 382x398x601 mm (Make Kerovit Catologue No :Rasso (isi) Model No-KS507 in Perryware ,Hindware equivalent )and sizes respectively with with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including fittings and brackets, cutting and making good the walls and floors wherever required complete all as specified.

S &F 18mm thick solid PVC ply of first quality of one side prelaminated of approved colour and one side white colour fixed with screw 'solvent cement/adhesive to make cupboard shutter complete all as specified.

S &F 18mm thick solid PVC ply of first quality of both side white colour fixed with screw 'solvent cement/adhesive to make shelves, partitions and drawers etc for kitchen cabinet and cupboards complete all as specified.

S & F stainless steel handle of 110mm size of best quality as per approved sample complete all as specified.

S & F magnet catch for kitchen cabinet shutter as per approved sample complete all as specified.

S&F of 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, ISI marked complete all as specified.

M&L for new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors of following sizes :-

(a)25 mm bore

(b)15 mm bore

Removing excavated material to a distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting complete all as specified.

M&L for providing precast cement concrete 1:2:4 type B1 20 mm graded stone aggregate as in landings, cover slabs (for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves, and similar articals with plain faces including chamfers, weatherings, throatings etc and set in cement mortar 1:4 complete with joints to match complete all as specified.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 with integral water proofing compound @ 3% of cement finished even and smooth without using extra cement complete all as specified.

M&L for 150 mm bore reinforced cement concrete pipe , class NP-3 laid & jointed complete with collars in cm(1:1) with spun yarn & tested complete all as specified.

M&L Plain cement concrete 1:4:8 type D2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore complete all as specified.

M&L for surface excavation n.exc. (Not exceedings) 30 cm deep and averaging 15 cm deep and getting out in Soft/Loose soil complete all as specified.

M&L for broken stone or boulders in hardcore of gauge exc 63 mm but n.exc 100 mm deposited spread and levelled in layers n. exc 15 cm thick watered and rolled/rammed to a true surface complete all as specified.

M&L Cement Concrete Type D-2, 1:4:8 using 40mm graded stone aggregate 100mm Thick complete all as specified.

M&L for Machine pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade over and including 25mm thick sand cushioning complete all as specified.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified.

Construction of Septic Tank For 10 Users complete all as specified and show on drawing (CEJZ/ 2002/TD/S-2 (1/1))

Demolition of brick masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings,dressed stone work and precast concrete articles complete all as specified.

M & L For RCC- M-25 (Design Mix) using 20mm graded stone aggregate for RCC walls complete all as specified.

S&F Mild steel work as in hand rails, for concertina fencing,half round or other stock section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, noising to steps including embeding in concrete and screwing etc wind ties for roof including securingm bolts, posts and struts in fencing including cutting tops to shape complete all as specified. drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc, and similar work confirming to Fe-290 Gde-E-165

S & F Concertina coil (on angle iron supports) conforming to IS-4454, IS-513, IS-277 & IS-280, with punched tape concertina coil 600 mm diameter having 50 Nos round per 6 M length with necessary bolts and GI staples with 09 nos horizontal R.B.T. reinforced barbed wire. stud tied with GI staples and GI clips to retain horizontals, Concertina coil of core wire diameter 2.95 mm, blade thickness 0.50 mm, balde length 12 mm, width of blade 15 mm and spacing of blade 26 mm.(Reinforced barbed tape/ spring core of min tensile strength 165 Kg / Sqmm tape complete all as specified.

M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L Preparation of new plastered surfaces of walls or un plastered surface and applying two coats of cement base paint over a coat of Priming with alkali resistant priming paint with hand roller complete all as specified.

Excavating over areas exc. 1.5m and n.exc 3.0m deep and getting out in soft/loose soil complete all as specified.

Excavating in trenches, n. exc 1.5m wide and exceeding 1.5 m but n.exceeding 3m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and and getting outin soft/loose soil complete all as specified.

M&L for PCC, M-15 (nominal mix) type B-2 (using 40mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified.

M&L for reinforced cement concrete M-30 (design mix) (20mm graded stone aggregate) as in foundations including rafts, footings, beams, plinth beams, bases for columns etc, basement slabs under reamed piles and mass concrete complete all as specified.

M&L for reinforced cement concrete M-30 (design mix) (20mm graded stone aggregate) as in walls , retaining walls basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses etc complete all as specified.

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses etc vertical or to batter fair finished surfaces of concrete flat complete all as specified.

M&L for reinforced cement concrete M-30 (design mix) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likecomplete all as specified.

M&L for Formwork to edges of concrete flats, treads breaks in floors, window cill concrete railling, opening in concrete walls floor and roof n.exc 20 cm wide and sides RCC / PCC band in walls horizontal and sloping and similar work with fair finished surface exc 10cm but not exc 20cm wide complete all as specified.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar150mm complete all as specified.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar 200mm complete all as specified.

M&L for Plain cement concrete 1:4:8 type D2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 200mm bore complete all as specified.

M&L for 150 mm bore reinforced cement concrete pipe , class NP-2 laid & jointed complete with collars in cm(1:1) with spun yarn & tested complete all as specified.

M&L for 200 mm bore reinforced cement concrete pipe , class NP-2 laid & jointed complete with collars in cm(1:1) with spun yarn & tested complete all as specified.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 mtr mean radius built in CM 1:4 complete all as specified.

M&L rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified.

M&L Rendering 22mm thick (First coat 12mm & second coat 10mm thick) in CM (1:3) finished even and smooth without using extra on fair faces of brick work or concrete surfaces (Bottom Slab & top of Slab) complete all as specified.

M&L Rendering 15mm thick in CM (1:3) finished even and smooth without using extra on fair faces of brick work or concrete surfaces (internal wall) complete all as specified.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150mm dia of pipe, complete all as specified.

M&L for rendering 15 mm thick in cement mortar 1:3 on ceiling of slab, beam surfaces finished even and smooth without using extra cement complete all as specified.

M&L for 40mm average thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in floor / padding finished the surface even and smooth without using extra cement complete all as specified.

M&L for nitobond (Forsoc) coating over concrete surface complete all as specified.

M&L for applying PVC waterbar of 5-6mm thick and 250mm wide as in joint of RCC concrete surface complete all as specified.

M&L for providing TM bond ACB SBR styrene butadiene rubber based polymer bonding agent having specific gravity of 1.02) of the Thermax or equivalent of webac chemicals/ chemco system in ratio as per recommendation of manufacturer total chemical not less than 5% by weight of cement for bonding old & new cementations surface for both horizontal & vertical surface of concrete complete all as specified.

Cleaning the surface thoroughly to make it free from dirt, dust etc and remove loose damaged concrete from the surface complete all as specified.

M&L for chemically treating internally/externally plastered surfaces of the sump with water proofing chemical such as FOSROC NITOBOND firmy mixed (base and hardener) applied at rate of 4.00 sqm/ litre, cleaning and preparing surfaces for application ccomplete all as specified.

S&F PVC coated rung size 300x300x25 mm complete all as specified.

S&F 100 mm bore cast iron vent pipe minimum 1.80 mtr long with CI bend with one end fixed mosquitoproof wire mesh fitted with 40x3 FI clamp complete all as specified.

M&L Cement concrete type C2 1:3:6 using 40mm graded stone aggregate as in foundations complete all as specified.

M&L loose filling with broken bricks of aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified.

S&F PVC (SWR) vent pipes 75 mm dia single socketed in any length with rubber joints fixed to walls complete all as specified.

S&F PVC (SWR) vent cowl 75mm dia complete all as specified.

M & L for concealed point wiring complete with proper colour coding using, 1100 Volts grade, 1.5 Sqmm, PVC insulated FRLS, unsheathed wire with multi stranded copper conductor confirming to IS-694, Part II, ISI marked drawn in and including PVC conduit (minimum 20mm dia) concealed in wall etc (also including cutting chiseling in wall and making good the same in CM 1:3 to match with the adjoining surfaces) with all accessories, fittings, PVC junction boxes etc, also including 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts multistranded copper conductor green colour as continuous earth wire connected to common earth dolly all as specified and directed for one light point /fan/bell point controlled by one one way switch, complete all as specified. Note: Modular flush box and inner/outer plates measured and paid separately.

All as per item No 115 above but for One 2pin/3 pin socket outlet 5 Amps on independent board complete all as specified.

All as per item No. 115 above but for One 2pin/3 pin socket outlet 5 Amps on same board with other switches , complete all as specified.

M&L for point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with and in and including PVC concealed conduit having thickness not less than 2 mm with all fittings including 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly.and including cutting chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching existing colour and complete all as specified . Note: colour coding is to be maintained .(Ph-Red, N-Black, Half-Yellow, Earth- Green)(Make of copper wire:Legrand/Polycab/Havells and PVC conduit Make: Precision,Plaza) Note: Modular flush box and inner/outer plates measured and paid separately.

M&L for ceiling rose three terminals AC 240 volts 50Hz complete all as specified.

M&L for switch modular one way 6/5 amps 1 module complete all as specified.

M&L for switch modular one way 16/20 amps 1 module complete all as specified.

M&L for socket modular 6Amp 2/3 pin combined 2 module complete all as specified.

M&L for socket modular 16/20 Amp 2/3 pin combined 2 module complete all as specified.

Supply and fix in repairs sheet metal enclosure powder painted for MCB DB SPN 4 way double door with din rail and 200 Amp bus bar complete all as specified.

Supply and fix in repairs MCB SP 240 Volts 6 to 32 Amps breaking capacity 10 KA,B Curve rating complete all as specified.

Supply and fix in repairs MCB SPN 240 Volts 6 to 32 Amps breaking capacity 10 KA,B Curve rating complete all as specified.

Supply and fixing modular metal flush box 1/2 module complete all as specified.

Supply and fixing modular metal flush box 3 module complete all as specified.

Supply and fixing modular metal flush box 8 module complete all as specified.

Supply and fixing modular white cover plate with frame 1/2 module complete all as specified.

Supply and fixing modular white cover plate with frame 3 module complete all as specified.

Supply and fixing modular white cover plate with frame 8 module complete all as specified.

Material and Labour for tube light fitting LED 20 watt with decorative end caps made out of CRCA sheet powder coated complete with housing with aluminium heat sink on back of leds ,power factor >0.9,having inbuilt surge protection device for overvoltage protection with all accessories prewired and making connection with 3 core copper flexible cable of size 23/.0076 from ceiling rose/PVC connector to light fitting and shall be fitted on new plastic square/round block complete all as specified.

Supply and fixing LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size upto 300mm sweep with, blades, and frame complete all as specified.

Supply and fix gun metal gate valve with iron wheel head screwed both ends for iron pipe for 25 mm complete all as specified.

M&L for drilling and taping cast iron water mains (in position) for branch connection of the internal dia 25 mm complete all as specified.

M&L for brick protection with sub Class`B` bricks old size laid dry, flat over cable perpendicular across the cable in trenches complete all as specified.

Supply spreading in trenches fine dry river sand for cable protection and punning down gently by hand complete all as specified.

Supply, Lay, Test & Commissioning cable LT XLPE insulated and screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor, 1100 Volts grade of Size 10 Sqmm, 4 core complete all as specified.

S & F for laying galvanixed steel tubing light grade (ISI marked) for protection of under ground cable on poles/walls or under road crossing of size 50mm bore complete all as specified.

Tulsi Enterprises (BID ID -3511808)