Loading
Loading…
Loading…
Tender Value
₹3.2 Cr
EMD Value
₹4.8 L
Closing Date
21 Sept 2026, 9:30 pm
Public Works Department
RAMAMURTHY K L
08152222022
9901202424
Construction of modern digital public library in the memory of Dr. B.R. Ambedkar in second phase carried out at the site of DR.B.R.Ambedkar memorial, museum and research center at 8 acre 20 gunta land in Sy No.-2, Bangarada Gani Village, KGF Town.
PWD/2026-27/BD/WORK_INDENT39519
PWD/2026-27/BD/WORK_INDENT39519
Open
Buildings
Two Tender Document System(Two Cover)
PWD Division Office Kolar
8 documents required · 8 mandatory
3.2 b. To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22,2022-23,2023-24,2024-25,2025-26 satisfactorily completed (At least 90% of the Contract Value) as a prime contractor at least ONE SIMILAR NATURE OF WORK Such as Building work to an extent of 50% of the cost of the work, of any construction work of value not less than Rs. 160.00 Lakhs (Past experience) Certified duly by the 0fficer not below the rank of Executive Engineer
3.2 d The Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works of value not less thank Rs. 23.60 Lakhs (usually not less than 50% of the electrical works) in any one year
3.2 e Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totalling of value not less than Rs.5.40 lakhs (not less than 50% of WATER SUPPLY AND SANITARY works) in any one year
3.3 a Owning the following key and critical equipment for this work 1.Tipper/HGV-1 Nos. 2.Water tanker-1 No
3.3 b Lease/Hire of the following key and critical equipment for this work 1. Tipper/HGV-1 Nos. 2.Water tanker-2 Nos
3.2 c. executed in any one year in the last five years i.e. 2021-22,2022-23,2023-24,2024-25,2025-26 , the following minimum 80% quantities of work: 1) Flooring/cladding using granite, vitrified tiles , ceremic tiles , color glazed tiles 3330.00 sqm 2) Painting 8790.00 sqm 3)UPVC window 690.00 Sqm( 4)MS Grills 14,910 kg (5)Stainless steel-6370 Kg 80% of peak rate of construction)
3.2 a All Tenderers shall provide the requested information accurately and in sufficient detail in Section 3 Qualification information. 1.To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22,2022-23,2023-24,2024-25,2025-26 achieved in at least two financial years a minimum financial turnover(in all classes of civil engineering construction works only) of Rs. 641.00 Lakhs Financial Status(Certificate from CA with UDIN Number, if Failed to satisfy the condition tender will be rejected) (The turn over certificate shall have UDIN generated through ICAI Portal. Turn over certificate without UDIN will not be considered and treated as invalid. The confirmation letter issued by Chartered Accountant shall also have UDIN generated through ICAI Portal)
3.3 c Liquid assets and /or availability of credit facilities of no less than Rs.160.30 Lakhs (estimated cash flow for 3 months of peak construction period)
Balance sheet for the past five years stating the gross civil engineering contract reciepts.The balance sheet uploaded should be auidted by the Chartered Account and should consist of valid UDIN Number.
The Contractor should upload the GST returns (GSTR-3B / GSTR-9) , Income Tax Return (ITR) filed for the relevant assessment year(s) and matches with the Year-wise statement of gross civil engineering contract receipts
3.6 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under:Assessed available tender capacity (A X N X1.5 - B) WHERE A is Maximum value of works executed in any one year during the last five years taking into account the completed as well as works in progress, N Is Number of years prescribed for completion of the works for which tenders are invited B is Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next 06 Months. (period of completion of the works for which Tenders are invited)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
₹5,000
₹4.8 L
19 Aug 2026
19 Aug 2026
22 Sept 2026
19 Sept 2026
18 Sept 2026
Construction of modern digital public library in the memory of Dr. B.R. Ambedkar in second phase carried out at the site of DR.B.R.Ambedkar memorial, museum and research center at 8 acre 20 gunta land in Sy No.-2, Bangarada Gani Village, KGF Town.
Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide...
Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...
Providing and fixing reeded Glass 3mm thick with teakwood beading of
10mm thick. ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery e...
Providing and fixing reeded Glass 3mm thick with teakwood beading of
10mm thick. ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery e...
Providing and fixing reeded Glass 3mm thick with teakwood beading of
10mm thick. ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery e...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic E...
Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic E...
Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic E...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including ...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...
Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm...
Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as...
Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, c...
Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, c...
Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, c...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint...
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly clean...
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly clean...
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly clean...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manuf...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manuf...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manuf...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manuf...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and...
polyurethane based single Component for New surface - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrac...
polyurethane based single Component for New surface - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrac...
polyurethane based single Component for New surface - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrac...
polyurethane based single Component for New surface - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrac...
Providing& fixing of Openable door made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) a...
Providing& fixing of Openable door made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) a...
Providing& fixing of Openable door made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) a...
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the bu...
Providing, assembling and supplying vision Glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated Glass (double glazed) vision panel units of size and shape as required and specifi...
Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm
with suitable washers weighing not less than 33 gms ---- With all leads and lifts cost and conveyance of all materials, cost of...
Providing and fixing bright finished brass tower bolts (barrel type) with
necessary screws etc. complete : 250x10mm ---- With all leads and lifts cost and conveyance of all materials, cost of labour, ...
Providing and fixing bright finished brass tower bolts (barrel type) with
necessary screws etc. complete : 150x10mm ---- With all leads and lifts cost and conveyance of all materials, cost of labour, ...
Providing and fixing bright finished brass butt hinges with necessary screws
etc. complete : 125x85x5.5 mm (heavy type) ---- With all leads and lifts cost and conveyance of all materials, cost of labo...
Providing and fixing bright finished brass butt hinges with necessary screws
etc. complete : 100x85x5.5 mm (heavy type) ---- With all leads and lifts cost and conveyance of all materials, cost of labo...
Providing and fixing bright finished brass handles with screws etc. com- plete: brass handles 125 mm with plate 175x32 mm ---- With all leads and lifts cost and conveyance of all materials, cost of la...
Providing and fixing bright finished brass handles with screws etc. com- plete: brass handles 100 mm with plate 150x32 mm ---- With all leads and lifts cost and conveyance of all materials, cost of la...
Providing and fixing bright finished brass hanging type floor door stopper
with necessary screws, etc. complete. ---- With all leads and lifts cost and conveyance of all materials, cost of labour, cur...
Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incha...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...
Mechanical Means -
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of ...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting Each deposited layer by ramming after watering with a lea...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying of special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc. complete. 110mm dia PVC coupler...
Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 110 mm dia PVC Elbows ---- With all ...
Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 110 mm dia PVC Tee ---- With all leads a...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for ...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing and constructing WIRE CUT BRICK MACHINEHOLE CHAMBERS using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approve...
Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...
Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...
Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), includi...
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), includi...
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), includi...
Supplying heavy gauge PVC conduit pipe . mm dia. mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The con...
25 mm dia 2 mm thick
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading cha...
32 mm dia 2.5 mm thick
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading c...
Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement ...
25 mm dia 2 mm thick
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading cha...
32 mm dia 2.5 mm thick
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading c...
Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges...
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges...
Supplying and fixing PVC/metal conduit Deep junction box
19/20 mm deep Junction box
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machine...
25 mm deep Junction box
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading ...
32 mm deep Junction box
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading ...
Supplying PVC flexible conduit pipe . mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF s...
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges(Exclusive ...
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges(Exclusive ...
Supplying And Fixing Metal Fan Box with Round Hook.
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation cha...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...
Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery eq...
Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equ...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges(Exclusiv...
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges(Exclusiv...
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges(Exclusive ...
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges(Exclusive ...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/ C.C wall ...
3 Way ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges(Exclusive o...
4-5 Way ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges(Exclusive...
6 Way ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges(Exclusive o...
8 Way ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges(Exclusive o...
10-12 Way ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges(Exclusi...
16 Way ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges(Exclusive ...
18 Way ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges(Exclusive ...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
3 Module ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges(Exclusiv...
4 Module ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges(Exclusiv...
6 Module ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges(Exclusiv...
8 Module ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges(Exclusiv...
10-12 Module ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges(Excl...
16 Module ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges(Exclusi...
18 Module ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges(Exclusi...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Make : Anchor / Indo Asian / Lisha / Cona) 6A One Way Switch ---- With all ...
6A Two Way Switch ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges...
6A Three Way socket ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charg...
Stepped Fan Regulator Two Module ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and un...
6A Bell Push ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges(Excl...
32A DP Switch ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges(Exc...
6/16A Universal Socket ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading ch...
TV/Telephone Socket ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charg...
RJ45/I.O Outlet Cat-6 ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading cha...
Supplying and fixing of Modular MCB Devices (Tripper) With Breaking capacity of 6kA.
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire char...
Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws.
---- With all leads and lifts cost and conv...
Supplying 4 mm thick white plastic plate and covering for junction boxes of size . mm conduit using necessary machine screws.
---- With all leads and lifts cost and conveyance of all materia...
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges(Exclusive...
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Bakelite Ceiling Rose ---- With all leads and lifts cost and conveyance of all materials, cost of la...
6A Pendant Holder ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges...
6A Batten Holder ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges(...
16A Three Pin Top ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges...
Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped wi...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.
50 x 100 x 50 x 6 mm C channel
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unl...
Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/ FRP/DMC insulator which are...
250 A 4 x 30 x 10 mm Aluminium Strips
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading ...
Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound.
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curi...
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.
---- With all leads and lifts cost and conveyance of all materials, cost o...
Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, trans...
Supplying, fixing and wiring rotary selector switch suitable for Ammeter
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipmen...
Supplying, fixing and wiring rotary selector switch suitable for Voltmeter
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipm...
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with ...
Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter.
---- With all leads and lifts cost and conveyance of all materials...
Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired.
Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution)
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curi...
Fixing of . A TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling.
100A to 250A TPST
---- With all le...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
160 A 25 kA -4 Pole ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading cha...
200 A 25kA- Four Pole. ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading ch...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit bre...
6-32 A DP ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges(Exclusi...
40 A DP ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges(Exclusive...
6-32 A TPN ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges(Exclus...
40 A TPN ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges(Exclusiv...
Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suita...
Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 p...
12 Way SP N Double Door ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading ...
16 Way SP N Double Door ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading ...
12 Way TP N Double Door ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading c...
16 Way SP N Double Door ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading c...
Supply and fixing of Surge Protection devices (SPD)of type-2 at the power source to the sensitive Electronic and Electrical Equipment.Detail Specification is as follow:
- In Conformance with standards...
Supplying of feet PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours 70 lumen maintenance with CRI 80 Power Input 220-240V 50/60Hz & Power factor...
LED light fitting 1 x 4' - 20/22 W ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and ...
LED light fitting 1 x 4' - 36/40 W ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and ...
Supplying of recess mounting non integral type . LED luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K,CRI ...
LED modular down light 2'x2' 36 W
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and ...
Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...
Using necessary length of G.I. chain
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading a...
Supplying & fixing of retrofit type - LED bulb W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance t...
Supplying & Fixing of 70-150 W lamp holder 2 Pin
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charge...
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...
Supplying wall mounting fan suitable to operate at single- phase 230v AC. supply. (Make : Usha / Almonard / Bajaj / Khaitan / crompton)
---- With all leads and lifts cost and conveyance...
Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary ...
Extra length of GI pipe of class B 19mm dia for down rod.
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportati...
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. (Make : Usha / Almonard / Bajaj / Khaitan / crompton)
12" Sweep (300 mm)
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire.
---- With all leads and l...
Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote.
---- With all leads and l...
Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote.
---- With all leads and lifts cos...
Supplying of . TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed inverter compressor with air cooled condenser, latest R410...
2 Ton capacity - 5 star ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading...
Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C.
Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil and gas...
Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load, with over load protection, spike suppression, operati...
Supplying and drawing UTP-CAT 6E LAN cable. (Make : D-Link / Poycab / Finolex)
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery e...
Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable.
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of...
Supplying Fixing of switch mounting rack with power manager Cable manager (Make D Link TP Link) 4U with 450mm depth ---- With all leads and lifts cost and conveyance of all materials, cost of labour, ...
9U with 450mm depth ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading char...
12U with 450mm depth ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading cha...
Supplying fixing of Network Switches (Make Cisco D Link TP Link Hewlett Packard) 24 Port Gigabyte (manageable) ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curin...
10Port Gigabyte (manageable) ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloa...
24 port 10/100/1000 Switch ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloadin...
16 port 10/100/1000 Switch ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloadin...
Supplying fixing of I O socket with back box Single I/O ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation...
Double I/O ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges(Exclus...
Supplying Fixing of ms Cat 6 Patch Cable 1 m ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, l...
2 m ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges(Exclusive of ...
Supplying Fixing of Patch panel for LAN cabling (Make DLink TP Link) 24 Port 10/100/1000 patch panel ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire ch...
16 Port 10/100/1000 patch panel ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unl...
Extra for Fabrication supply and fixing of Stand fabricated using slotted angle /L angle of size 6mm x 50mm for mounting out door/ indoor A.C. unit/ Batteries.
---- With all leads and lifts cost and ...
LED Light fixture with.W System Power consumption. LED Efficiency1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency...
Supplying and Fixing.mm dia clampsss A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street lig...
Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...
Supply of LED Bollard light fitting of .W with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded...
Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires.
---- With all leads and lifts cost...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...
GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 3 mm GI strip ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing,...
25 x 3 mm Copper strip ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading ch...
Supplying of Guy Wire & GI Wire as per BESCOM Specification. (Page-435-436)
8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM
---- With all leads and lifts cost and conveyance of all materials, cost of ...
Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-...
95 Sqmm, 3.5 Core, (21 GI Strips - 4 x 0.8 mm)
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges,...
Labour charges for Laying of XLPE UG Cable Using Conventional Laying with Excavation of Soil (Page 365) a) Cable trench excavation, 1000x0.6x1=600, Ordinary soil (Extracted from Vol-1, PWD SR Sl No. 1...
c) Refilling and consolidation (Extracted from Vol-1, PWD SR Sl No. 1.10) ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipmen...
h) supplying and Laying of RCC Hume pipe (Material : 307(CDS-21) + Labour :69 (CDS-19)) ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of mac...
Supplying of Brass Cable Gland as per BESCOM specification (BESCOM SR Page:364)
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of mach...
Supplying of Heavy Duty Copper Terminal Long Barrel (Lug) as per BESCOM specification (BESCOM SR Page 362) 25 Sqmm Copper Terminal, Apprx Wt: 11 Gm ---- With all leads and lifts cost and conveyance of...
50 Sqmm Copper Terminal, Apprx Wt: 26 Gm ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loadin...
95 Sqmm Copper Terminal, Apprx Wt: 58 Gm ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loadin...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/ Aluminum Rollers as directed by the departmental staff as per BESCOM specification. (Sl.No 170 Item No:21 (Page 482) L...
---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges(Ex...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
Supplying of Guy Wire & GI Wire as per BESCOM Specification. (Page-435-436)
8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM
---- With all leads and lifts cost and conveyance of all materials, cost of ...
Supplying and Errection of DP Transformer Structure using RCC Pole - 9 Mtr Long, 145 Kg WL as per BESCOM Specification. (Vol-4 (KPTCL,ESCOMs& PWD Ele) 2023-24 (CDS - 26) ---- With all leads and lifts ...
Supplying of 11 kV, 5 KN Polymeric Pin Insulator (24 mm Dia FRP Rod) as per BESCOM Specification. (Vol-4 (KPTCL, ESCOMs &PWD Ele) 2023-24 (CDS - 26) ---- With all leads and lifts cost and conveyance o...
Supplying of 11 kV, 45 KN Polymeric Insulator as per BESCOM Specification. (Vol-4 (KPTCL, ESCOMs&PWD Ele) 2023-24 (CDS - 26) ---- With all leads and lifts cost and conveyance of all materials, cost of...
Supplying of Fixing of Guy Set Complete with No. 15 Strain Insulator & Concreting materials as per BESCOM Specification. (Vol-4 (KPTCL, ESCOMs&PWD Ele) 2023-24 (CDS - 26) ---- With all leads and lift...
Supplying and Errection of 11kV/433V, 100 kVA, 3 Phase 50 Cys Distribution Transformer BEE - 5 Star Rated with Oil as per BESCOM Specification. (Vol-4 (KPTCL, ESCOMs& PWD Ele) 2023-24 (CDS - 26) ---- ...
Supplying and fixing of Caution/Danger Board as per BESCOM Specification. (Vol-4 (KPTCL, ESCOMs&PWD Ele) 2023-24 (CDS - 26) ---- With all leads and lifts cost and conveyance of all materials, cost of ...
Supplying and fixing of Anti Climbing Device (12 Mtr GI Barbed Wire) as per BESCOM Specification. (Vol-4 (KPTCL, ESCOMs& PWD Ele) 2023-24 (CDS - 26) ---- With all leads and lifts cost and conveyance o...
Fixing of Guy concreting with Boulders, Mud and Sand as per BESCOM Specification. (Vol-4 (KPTCL,ESCOMs &PWD Ele) 2023-24 (CDS - 26) ---- With all leads and lifts cost and conveyance of all materials, ...
Supplying of Guy Wire & GI Wire as per BESCOM Specification. (Vol-4 (KPTCL, ESCOM s&PWD Ele) 2023-24 (CDS - 26) 8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM ---- With all leads and lifts cost and c...
7/10 SWG Guy Wire(7/3.251 mm Dia), Std Wt: 680 Kg/KM ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation cha...
Supplying and Fixing of 11 kV Lightning Arrester, Metal Oxide 10 kV, 5 kA Polymetic Type with ground disconnector as per BESCOM Specification. (Vol-4 (KPTCL, ESCOMs &PWD Ele) 2023-24 (CDS - 26) ---- W...
Supplying and Fixing of a) LT Distribution box for 100 kVA as per BESCOM Specification. (Vol-4 (KPTCL,ESCOMs& PWD Ele) 2023-24 (CDS - 26) ---- With all leads and lifts cost and conveyance of all mater...
Supplying and Fixing of b) LT Distribution box for 100 kVA with MCB as per BESCOM Specification. (Vol-4 (KPTCL, ESCOMs& PWD Ele) 2023-24 (CDS - 26) ---- With all leads and lifts cost and conveyance o...
Fixing of c) LT Wiring (From DTC to LT Line Through Merering Box & LT Protection Kit/LT Distribution Box) SINGLE CIRCUIT as per BESCOM Specification. (Vol-4 (KPTCL, ESCOMs &PWD Ele) 2023-24 (CDS - 26...
i) Al Lead Wire - 120 Sqmm ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloadin...
ii) Heavy Duty Long Barrel Copper Lug - 120 Sqmm ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges...
iii) PG Clamp - Rabbit to 120 Sqmm ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and ...
iv) Spacer for DTC Wiring ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading...
v) Fish Plate with necessary Clamps, bolts & nuts etc complete (Galvanised) ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipm...
v) Fish Plate with necessary Clamps, bolts & nuts etc complete (Galvanised) ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipm...
d) LT Metering box with CTs and necessary wiring for housing ETV Meter (Please see CDS - 39) as per BESCOM Specification. (Vol-4 (KPTCL, ESCOMs& PWD Ele) 2023-24 (CDS - 26) ---- With all leads and lif...
Supplying of fixing of e) LT Electronic Tri-Vector Meter 5 Amps, -0.5/1.0 Accuracy Class (CDS-27) as per BESCOM Specification. (Vol-4 (KPTCL,ESCOMs& PWD Ele) 2023-24 (CDS - 26) ---- With all leads and...
Supplying of 11 kV, HG Fuse Unit with Solid Core Insulator Unit as per BESCOM Specification. (Vol-4 (KPTCL,ESCOMs& PWD Ele) 2023-24 (CDS - 26) ---- With all leads and lifts cost and conveyance of all ...
Supplying of 11 kV, 200 Amps Single Break GOS as per BESCOM Specification. (Vol-4 (KPTCL,ESCOMs& PWD Ele) 2023-24 (CDS - 26) ---- With all leads and lifts cost and conveyance of all materials, cost of...
Supplying and fixing of RCC Pole - 9 Mtr Long, 145 Kg WL as per BESCOM Specification. (Vol-4 (KPTCL,ESCOMs& PWD Ele) 2023-24 (CDS - 1) ---- With all leads and lifts cost and conveyance of all material...
Supplying and Stringing of Rabbit ACSR Conductor as per BESCOM Specification. (Vol-4 (KPTCL,ESCOMs&PWD Ele) 2023-24 (CDS - 1) ---- With all leads and lifts cost and conveyance of all materials, cost ...
Supplying and fixing of LT 4 Pin Cross Arm with clamps, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL as per BESCOM Specification. (Vol-4 (KPTCL, ESCOMs &PWD Ele) 2023-24 (CDS - 1) ---...
Supplying and fixing of 2 pin cross arm as per BESCOM Specification. (Vol-4 (KPTCL, ESCOMs&PWD Ele) 2023-24 (CDS - 1) ---- With all leads and lifts cost and conveyance of all materials, cost of labou...
Supplying & Fixing of Spiral Earth Electrode as per BESCOM Specification. (Page : 347) (239+93) ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges...
Supplying of Load break switch with panel as per ESCOM specification (Page : 447) ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery ...
Supplying of 11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar, Modem & 2 No of Meters for 3 Phase 4 ...
Supplying of Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable - 3 x 95 sqmm as per BESCOM Specification (Page : 450) ---- With all leads and lifts cost and conveyance of all materials,...
Supplying of Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable - 3 x 95 sqmm as per BESCOM Specification ---- With all leads and lifts cost and conveyance of all materials, cost of lab...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
39519 KW4 doc.doc
Tender Document • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].