PROVISION OF TOILET BLOCK NEAR CSD CANTEEN AT PALMA GARRISON UNDER AGE(I) CIF(R)

Amount

Surface dressing in any type of soils not exc. 15 cm deep and removing surplus materials to a distance exc. 250 mtr as directed by Engr-In-Charge.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil, complete all as specified and directed.

M&L for hard core of broken boulder n exc 63 mm, deposited, spread and levelled in layers n exe 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as foundation filling and mass concreate, complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50 mtr and deposting where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified.

Returning filling in, including spreading ,leveling ,watering and well ramming in layers not exc 25 cm complete all as specified.

Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for 40mm thick cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate) as in sub floors finished even and rough to receive the topping layer complete all as specified and directed.

M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 using old size bricks, complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on walls finished even and smooth complete all as specified and directed by engr-in-charge.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 on walls finished even and smooth complete all as specified and directed by engr-in-charge.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint on walls complete all as specified and directed by Engineer-in-charge.

M&L for non skid ceramic colour tiles 8 to10mm thick (square/rectangle) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or beddding layer in CM 1:4, complete all as specified and directed.

M & L for Glazed ceramic coloured printed tiles (first quality) of size 350 mm x 250 mm x 7 mm/450 mm x 350 mm x 7 mm thick as in vertical surface, dado/skirting, over and including 15 mm thick rendering in CM 1:4, complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240,complete all as specified and as directed.

S&F Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

S&F Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

S&F 1000 litres Capacity Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long, complete all as specified and directed.

S&F vitreous china wash hand basin white of bowl size 550x400mm including waste coupling and waste pipe PVC 32mm dia to be fixed over mild steel bracket complete all as specified and directed.

S & F Vitreous china one piece EWC with slim soft close seat cover size 715x335x715mm straight -line design square blow concealed 'S' trap for batter aesthetics, snow white colour, including fixing with screw/bolts fixed, complete all as specified and directed. Make:-CERA Cat. No.S1013209 or equivalent cat part of make as specified in list of make here-in-after.

M & L for cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps cills chases for concealed water tubing not exc. 10cm girth, complete all as specified and as directed.

S&F 15 mm bore dia steel water tubing 'medium grade' galvanised with all fitting (i.e. Tee, socket, bend etd) complete to walls and ceilings or laid in floors, complete all as specified and directed by Engr-in-Charge.

S&F 20 mm bore dia steel water tubing 'medium grade' galvanised with all fitting (i.e. Tee, socket, bend etd) complete to walls and ceilings or laid in floors, complete all as specified and directed by Engr-in-Charge.

S&F bib taps, fancy type, chromium plated, cast copper aloy ISI marked with crutch or butter fly handle high pressure screwed down for iron pipe of 15mm bore complete all as specified and directed by Engr-in-Charge.

S&F Stop valves, cast copper alloy, screwed down, high pressure, chromium plated fancy type (concealed type), with crutch or butterfly handle, screwed both ends for iron pipe 15mm dia , complete all as specified and directed.

S&F stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20 mm bore complete all as specified.

S&F stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified.

S&F 15mm bore angle valve chromium plated screwed down fancy type high pressure screwd both ends for iron pipe of 15mm bore complete all as specified and directed by Engineer-in-Charge.

S&F PVC connection 15 mm dia with PTMT nuts of length 450 mm complete all as specified.

S&F CP grating 100mm dia with or without hole complete all as specified.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F fancy type Pillar tap cast copper alloy chromium plated with capstan heads screwed down high pressure or without lettered hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed.

S&F for 110mm bore, PVC (SWR) rain water drainage pipes single socketed in any length with rubber ring joints included bends fixed to walls/floors complete all as specified.

S&F 110mm PVC Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified and directed.

M&L 75mm PVC Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified.

S&F 75mm PVC Bends (any radius),complete all as specified and directed.

M&L 75mm PVC floor trap, with grating including jointing to waste pipe fixed in cement type B-1 1: 2:4 and making good wall or floor tiling to match existing surface, complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, skirting/dados including cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

S&F Vitreous china Urinal, Half stall type, white (excluding flushing cistern and flush pipe ) complete incl providing and fixing plugs, beddding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screw, pointing around urinal back in cement; including waste pipe,complete all as specified and directed.

M&L for TMT bars 10mm dia and over cut to length, bend to shape required including cranking, bending, spirally for hooping columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

Mild Steel TMT bars 6 to 8 mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) type B-1, 1:2:4 (20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by engr-in-charge.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal/sloping), fair finished surfaces concrete flat complete all as specified and directed by engr-in-charge.

Toilet paper holder with flap guard chromium plated, complete all as specified and directed by Engineer-in-charge. Make:-CERA Cat Part No. F5002110 or equivalent cat part of make as specified in list of make here-in-after.

Towel ring chromium plated complete all as specified and directed. Make:-CERA Cat Part No. F5002105 or equivalent cat part of make as specified in list of make here-in-after.

S&F toughfend figured glass 8mm thick pin head type, as in door side hungs/ slidng type including necessary fixing arrengment such as floor spring/ top track etc, complete all as specified.and directed

S&F Brass chromium plated bottle traps of bore 32mm for wash basins/sinks with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, complete all as specified and directed.

Solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S square tube, suppling and fixing in opening as per specification and drawing as per SSR Pt-II 2020, complete all as specified and directed.

Supply and fixing factory made 30 mm PVC rigid foam panel door shutter made from mild steel tubular frame of size 19 mm x19 mm for stiles and 15 mm x 15 mm for top and bottom rails and covered with 5 mm thick head moulded PVC channel having width of 50 mm to form stiles and PVC street of width 75 mm to form rock rail, bottom rail and top rail or either side having panels inserted with 5 mm thick PVC sheet sealed with solvent cement adhesive to the stiles and rails with 5 mm x 25 mm PVC sheet beading on either side including three Nos. aluminium hinges for each door complete all as per manufacturer instructions complete all as specified and directed.

M&L for 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of ceiling/ sunshed, complete all as specified and directed.

S&F, PVC Wall lining consisting of 5mm thick plain colour PVC sheet as in striups and chanel inclusive of solvent cement and fixing at site on necessary pvc frame incl fillets as per specifications and drawings

Construction of Soakage well of size 1.2m dia and 3.0m effective depth in excavation in any type of soil foundation in PCC 1:3:6 , walls of honey combed and solid brick work in CM 1:4, RCC M-25/SFRC cover slab filling with bats as shown in drg No TD CE/TD-1202/2003 sheet No 1/2 and 2/2 dt 09.10.2003, complete all as specified in drg, complete all as specified and directed. Note : Rate quoted shall deemed inclusive of dewatering during construction if met with.

M&L for concrete bed to drain pipes of bore 150mm including packing under,and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) including necessary shuttering and supports, complete all as specified and directed.

M&L for salt glazed stone ware drain pipes of internal diameter 150 mm grade 'A' laid in trenches and jointed complete all as specified .

M&L for 150 mm bore salt glazed stone ware bends and taper bends, any radius complete all as specified .

Supply and fix gun metal gate valve 20 mm bore with iron wheel screwed both ends for iron pipes complete all as specified and directed.

Cutting existing steel tubing 50 mm bore for alterations or additions (Each cut measured) necessarily done in position without taking down, complete all as specified and directed.

M&L Screwing existing steel tubing 40-50 mm dia for alterations or additions (or lengthening screw on pipe to form connector), complete all as specified and directed.

Supply and fix gun metal gate valve 40 mm bore with iron wheel screwed both ends for iron pipes complete all as specified and directed.

Excavation in trenches in any type of soil not exc 1.5m wide and n.exc 1.5m in depth for electric poles, stay foundation, under ground electric power cables and water supply pipe line and getting out, complete all as specified and directed.

M&L for point wiring concealed type with PVC insulated unsheathed copper cable FRLSH 1.5 sqmm multi stranded two single copper conductor in and including suitable size PVC conduit pipe 20 mm dia complete with all accessories and with 1.5 sqmm PVC insulated copper cable FRLSH continous earth wire, re-recessed mounting pressed steel GI sheet box 2 mm thick suitable for modular switch/socket of adequate size including iner and outer white cover plate of modular complete all as specified and directed for followings :-

One light/fan point controlled by one switch 5 Amp.

One socket outlet 5Amp controlled by one switch on same board.

M&L for power point wiring concealed type with PVC insulated unsheathed copper cable FRLSH 2.5 sqmm multi stranded two single copper conductor in including PVC conduit pipe 20 mm dia complete with all accessories and with 2.5 sqmm PVC insulated copper cable FRLSH continous earth wire, re-recessed mounting pressed steel GI sheet box 2.0 mm thick suitable for modular switch/sockets including inner and outer cover plate of adequate size complete all as specified and directed.

S&F of ceiling rose, surface bakelite 65x50mm three terminals PVC/Polycarbonate complete all as specified and as directed

Supply and fixing of modular switch single pole one way 6 Amps 1 module complete all as specified and directed

Supply and fixing of modular switch single pole one way 16 Amps 1 module complete all as specified and directed.

S & F of modular socket 6 A/16 amp -3/5 pin combined 2 module complete all as specified and directed.

S&F of modular socket 6 A-2/3 pin combined 2 module complete all as specified and directed.

Supply and fixing of Endura Linear NEO wall mounted LED Batten 20 Watt LED, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete all as specified and directed.

Supply and fixing of Endura Linear NEO wall mounted LED Batten 10 Watt LED, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete all as specified and directed. Make :Havells Cat Part No.ENDURALINEARNEOBS10WLED865SPCWH or equivalent cat part of make as specified in list of make here-in-after.

Supply and fixing of sheet metal enclosure MCB distribution board SPN 8 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail, complete all as specified and directed.

Supply and fixing of MCB single pole 6 to 30 Amps, 10KA, 230 volts 'C' series, complete all as specified and directed.

Supply and fixing of MCB SPN 40 to 63 Amps, 10KA, 230 volts 'C' series, complete all as specified and directed.

Earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground preferably in vertical position (Earth pit not less than 2.25 mtr below ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron strip 25×4 mm by means of bolts, nuts, check nuts and washers of galvanised iron including pit of PCC (1:2:4) type B-1, pre cast RCC cover slab of size 550x550x75mm, XPM reinforced not less than 1.60Kg/Sqm with suitable built in handle made from 12mm dia MS round bar, excavation and earth work in any type of soil, 20mm dia bore medium grade galvanised iron water tubing fixed with cast iron funnel and wire mesh at one end, 15mm bore light grade galvanised iron protection pipe for earth lead wire upto 5m length, charcol, common salt complete all as shown in electric plate No 3 of SSR 2009 Part I connected to equipment, testing on completion, complete all as specified and directed.

M&L GI Earth wire size 04 mm as earth continuty conductor.

Supply and fix of exhaust fan made of steel body AC single Phase, 230V, 50 Hz,RPM 1400, Copper winding of sweep 300mm with. Blades, frame and louvers complete all as specified.

M&L of sub main wiring with two run of single core PVC insulated FRLSH stranded copper conductor cable of size 4 Sq mm and one run of 4 Sq mm PVC insulated FRLSH copper conductor cable as earth continuity conductor drawn in and including PVC casing and caping with necessary accessories complete all as directed. Note : 2 Runs of 4 sqmm cable and one run of 4.00 sqmm earth wire with PVC rigid conduit shall be measured as on length.

S&F Ultra slim LED light to new 36W LED recess mounted bakalite panel 2' x 2' luminaire suitable for surface/grid ceiling for low ceiling applications complete with tube, driver and connecting cable including making electric connection to ceiling rose or connector complete all as specified and as directed. Make:-Havells Cat Part No. STRATO2X2PLR36WLED830MOD or equivalent cat part of make as specified in list of make here-in-after.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

Supply, laying, jointing and testing XLPE insulated PVC sheathed armoured under ground cable heavy duty with aluminium conductor LT 1100 V grade cross sectional area 16 Sqmm 2 core, complete all as specified and directed by Engineer-in-Charge.

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled with charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) as specified including provision of 15mm dia medium grade GI pipe for earth wire protection and 20 mm dia for watering complete , all excavation and earth work & connecting the earthing to an earthing test point / main switch board as specified and testing on completion, complete all as specified and directed.

GI strip of size 25 x 4 mm for earth continuity conductor or main earthing lead fixed to wall burried in gound fixed alongwith poles complete all as specified.

Sand cushioning with fine sand to under ground cables in trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable as specified in clause 19.75 of SSR Part-I, complete all as specified and directed by Engr-in-Charge.

M&L for Brick covering with width equal to length of brick as mechanical protection to cables with well burnt sub class ‘B’ (old size) bricks laid dry flat, complete all as specified and directed.

Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of ₹ NIL during AOC Note:- Tenderers shall not quote for this Schedule

M/S KALSI ENGINEERS AND CONTRACTORS

arneesh kumar suri

M/S RAHUL GUPTA