CA NO. GE (AF)/SGR-48/2024-25 CERTAIN REPAIR WORKS TO CHARPOY / BED AND SOFA SETS UNDER BSO OF GE (AF) SRINAGAR.

Amount

Note for All Items of This BOQ:- (i) Unless / otherwise specified in the BOQ size & material component of Furniture article shall be as shown in relevent Drawing (ii) Quoted Rates for Replacement of component of Furniture article shall be deem to include cast of two coat synthetic enamel paint over one coat primer / two or more coat sprit polishing to match with existing surface as mention in relevant drawing / directed by Engineer-in-Charge

BED PLY WOOD TOP / BED HARD (FD-246-247)

Replacement of unserviceable legs, made out ofTeak wood free from knots complete all as specified and directed by Engineer-in-Charge.

Replacement of unserviceable long rail made out of Teak wood complete all as specified and directed by Engineer-in-Charge.

Replacement of unserviceable short rail by conversion of long rail into short rail complete all as specified and directed by Engineer-in-Charge.

Replacement of unserviceable plywood of head board with plywood of 3.5mm thick with one side teak face covered with Teak Beading as per drawing complete all as specified and directed by Engineer-in-Charge.

Replacement of unserviceable plywood of foot board with plywood of 3.5mm thick with one side teak face covered with Teak Beading as per drawing complete all as speciofied and directed by Engineer-in-Charge.

Replacement of unserviceable supporting batten with Teak wood complete all as specified and directed by Engineer-in-Charge.

Replacement of batten of head board and footboard of Teak wood complete all as specified and directed by Engineer-in-Charge.

Replacement of Commercial plywood top 12 mm thick 6 ply, complete all as specified and directed by Engineer-in-Charge.

S&F Head boars made out of teak wood and teak face ply in front and commercial ply at back, all as per drg and as apecified by Engr in charge. The head board shall be properly polished after prepration of surfaces to its glossy look.

S&F foot boars made out of teak wood and teak face ply in front and commercial ply at back, all as per drg and as apecified by Engr in charge. The foot board shall be properly polished after prepration of surfaces to its glossy look.

Bed hard tubler steel with plytop / Bed Hard MAP

Replacement of unserviceable head board made out of PPB 18mm thick one side teak face laminated and one side white laminated rest all as per drawing complete all as specified and directed by Engineer-in-Charge.

Replacement of unserviceable foot board made out of PPB 18mm thick one side teak face laminated and one side white laminated rest all as per drawing complete all as specified and directed by Engineer-in-Charge.

Replacement old dmaged / wornout hard top made out of plywood top 12 mm thick Commercial 6 ply, complete all as specified and directed by Engineer-in-Charge.

Charpoy IP tubler stell with hard top

Replacement of Commercial plywood top 12 mm thick 6 ply complete all as specified and directed by Engineer-in-Charge.

TABLE DINING 4 PERSON 1200x900x750mm (FD-1003)

Replacement of unserviceable top of table dining 4 persons and supply and fixing new top of prelaminated particle board 18/19mm thick one side teak shade and white lamination on other side including 1st class hard wood beading all around the top and as directed by Engineer-in-Charge.

Replacement of unserviceable legs of table dining 4 person as per drg and Supply and Fixing new legs of teak wood ,complete all as shown on drawing and as directed by Engineer-in-Charge.

Replacement of unserviceable stiffner of table dining 4 persons and Supply and Fixing new stiffner of teak wood as per drg and as directed by Engineer-in-Charge.

Hard rubber buffers provided to the legs of the table, complete all as directed by Engineer-in-Charge.

TABLE DINING 6 PERSON 1500x900x760mm (FD-1003)

Replacement of unserviceable top of table dining 6 persons and Supply and Fixing new top of prelaminated particle board 18/19mm thick one side teak shade and white lamination on other side including wooden beading all around the top and as directed by Engineer-in-Charge.

Replacement of unserviceable legs of table dining 6 person as per drg and Supply and Fixing new legs of teak wood ,complete all as shown on drawing and as directed by Engineer-in-Charge.

Replacement of unserviceable stiffner of table dining 6 persons and Supply and Fixing new stiffner of teak wood , complete all as shown on drawing and as directed by Engineer-in-Charge.

Hard rubber buffers provided to the legs of the table, complete all as directed by Engineer-in-Charge.

HAT STAND WITH MIRROR (FD-233)

Repair to Hat Stand with mirror by replacement of teak face plywood of 1000mmx710mm x 6mm to the front and back side of the frame.

Replacement of unserviceable looking mirror of size 440x300x 4mm thick make Modi Guard /Atul with teak wood beading , complete all as shown on drawing and as directed by Engineer-in-Charge.

Replacement of 6 Nos of Brass peg sets of overall size 120mm x75mm to the Hat Stand ,rest all as shown on drawing and as directed by Engineer-in-Charge.

Wooden Beading

Replacement of 18 mmx 6mm thick 1st class hard wood Teak ,flat wooden beading all around the exposed edges of wooden / stel furniture articles of , complete all as shown on drawing and as directed by Engineer-in-Charge.

TABLE CENTRE 900x450x400mm (FD-274)

Replacement of unserviceable top of table Centre and Supply and Fixing new top of prelaminated particle board 18/19mm thick one side teak shade and white lamination on other side including wooden beading all around the top of 1st class hard wood ,complete all as shown on drawing and as directed by Engineer-in-Charge.

Replacement of unserviceable legs of table Centre as per drg and Supply and Fixing new legs of teak wood ,complete all as shown on drawing and as directed by Engineer-in-Charge.

Replacement of unserviceable stiffner of table Centre and Supply and Fixing new stiffner of teak wood, complete all as shown on drawing and as directed by Engineer-in-Charge.

Hard rubber buffers provided to the legs of the table ,complete all as shown on drawing and as directed by Engineer-in-Charge.

TABLE BED SIDE 450mm x230mmx510mm (FD-276)

Replacement of unserviceable rack /sides/top/bottom etc of table Bed Side and Supply and Fixing new rack of 18/19mm thick particle Board exterior grade having teak face on one side and commercial on other side including 4mm thick teak wood beading at front of the rack , complete all as shown on drawing and as directed by Engineer-in-Charge.

TABLE PEG 450x300x380mm (FD-277)

Replacement of unserviceable top of table Peg and Supply and Fixing new top of prelaminated particle board 18/19mm thick teak shade and white lamination on other side including 4mm teak wood beading all around the top, complete all as shown on drawing and as directed by Engineer-in-Charge.

Replacement of unserviceable legs of size 362mmx50mmx30mm of table Peg and Supply and Fixing new legs of teak wood ,complete all as shown on drawing and as directed by Engineer-in-Charge.

Replacement of unserviceable stiffner of table Peg and Supply and Fixing new stiffner of teak wood, complete all as shown on drawing and as directed by Engineer-in-Charge.

Providing of hard rubber buffers to the legs of the table , complete all as shown on drawing and as directed by Engineer-in-Charge.

TEAPOY WOODEN 600X450X540MM (FD-278)

Replacement of unserviceable top of teapoy wdn and Supply and Fixing new top of prelaminated particle board 18/19mm thick one side teak shade and white lamination on other side including 4mm thick teak wood beading all around the top ,complete all as shown on drawing and as directed by Engineer-in-Charge.

Replacement of unserviceable legs of teapoy wdn as per drg and Supply and Fixing new legs of teak wood ,complete all as shown on drawing and as directed by Engineer-in-Charge.

Replacement of unserviceable stiffner of teapoy wdn and Supply and Fixing new stiffner of teak wood, complete all as shown on drawing and as directed by Engineer-in-Charge.

Providing of hard rubber buffers to the legs of the table , complete all as shown on drawing and as directed by Engineer-in-Charge.

TEAPOY VERANDAH 900x450x400mm (FD-255)

Replacement of unserviceable top of teapoy verandah and Supply and Fixing new top of prelaminated particle board 18/19mm thick one side teak shade and white lamination on other side including 4mm thick teak wood beading all around the top, complete all as shown on drawing and as directed by Engineer-in-Charge.

Replacement of unserviceable leg 20mm dia MS round pipe legs (Medium grade) of teapoy verandah and Supply and Fixing of new legs of 20mm dia and 1.6mm wall thickness ,complete all as shown on drawing and as directed by Engineer-in-Charge.

Welding of joints where ever required, complete all as shown on drawing and as directed by Engineer-in-Charge.

Provn of hard rubber shoes to the legs of the table , complete all as shown on drawing and as directed by Engineer-in-Charge.

TABLE 900 x600 x760mm WITHOUT DRAWER (FD-284)

Replacement of unserviceable top of table and Supply and Supply and Fixing new top of prelaminated particle board 18/19mm thick one side teak shade and white lamination including 4mm thick teak wood beading all around the top, complete all as shown on drawing and as directed by Engineer-in-Charge.

Replacement of unserviceable legs of table as per drg and Supply and Fixing new legs of size 741mmx60mmx30mm of 1st class hard teak wood ,complete all as shown on drawing and as directed by Engineer-in-Charge.

Replacement of unserviceable stiffner of table and Supply and Fixing new stiffner of 1st class hard teak wood ,complete all as shown on drawing and as directed by Engineer-in-Charge.

Provn of hard rubber buffers to the legs of the table , complete all as shown on drawing and as directed by Engineer-in-Charge.

TABLE 900 x600 x760mm WITH DRAWER (FD-283)

Replacement of unserviceable top of table and Supply and Supply and Fixing new top of prelaminated particle board 18/19mm thick one side teak shade and white lamination including 4mm thick teak wood beading all around the top, complete all as shown on drawing and as directed by Engineer-in-Charge.

Replacement of unserviceable drawer of table and Supply and Fixing new drawer of seasoned kail wood to be provided with knobs duly polished complete all as shown on drawing and as directed by Engineer-in-Charge.

Replacement of unserviceable legs of table as per drg and Supply and Fixing new legs of size 741mmx60mmx30mm of 1st class hard teak wood ,complete all as shown on drawing and as directed by Engineer-in-Charge.

Replacement of unserviceable stiffner of table and Supply and Fixing new stiffner of 1st class hard teak wood ,complete all as shown on drawing and as directed by Engineer-in-Charge.

Providing of hard rubber buffers to the legs of the table , complete all as shown on drawing and as directed by Engineer-in-Charge.

TABLE DRESSING GENTS WITH MIRROR (FD-230, 231)

Replacement of old unserviceable damaged box of the table dressing gents, new box shall be made out of 18mm thick PPB and seasoned teak wood and knobs of SS shall be provided to the drawer, complete all as shown on drawing and as directed by Engineer-in-Charge.

Replacement of unserviceable mirror of 4.0mm thick of Modiguard or Atul of the table including replacement of unserviceable 1st class hard wood teak beading of the mirror all around and replacement of 6mm thick plywood on the back side of the mirror ,complete all as shown on drawing and as directed by Engineer-in-Charge.

Replacement of prelaminated Sheet of the complete table dressing gents and providing new prelaminated sheet of 1.0mm teak shade to the table dressing Gents, complete all as shown on drawing and as directed by Engineer-in-Charge.

Fixing only the table dressing Gents with mirror to the existing wall with the help of wooden L shapped brackets (2X to each table dressing gents) and approprate size anchor screws of size 6mm dia minimum and 4" long in length (L shapped brackets to be provided by the department only). 3X glass shelves to be fix by the contractor in the partitions of the table dressing Gents to make functional the furniture itmem. (glass shelves to be provided by the department only)

TABLE DRESSING LADIES WITH MIRROR (FD- 251)

Replacement of old unserviceable damaged box of the table dressing ladies, new box shall be made out of 18mm thick PPB and seasoned teak wood and knobs of SS shall be provided to the drawer, complete all as shown on drawing and as directed by Engineer-in-Charge.

Replacement of unserviceable mirror of size 1220mmx355mm x 5.5mm of the table including replacement of unserviceable beading of 1st class hard teak wood to the mirror and replacement of 6mm thick commercial plywood to the back side of the mirror ,complete all as shown on drawing and as directed by Engineer-in-Charge.

Replacement of prelaminated sheet of the complete table dressing ladies and providing new prelaminated sheet of 1.0mm teak shade to the table dressing Gents, complete all as shown on drawing and as directed by Engineer-in-Charge.

Replacement of unserviceable sliding glass shutters and providing new glass shutters of size 300mmx300mmx4mm with the knobs for smoth sliding of glass shutters of the table dressing ladies , complete all as shown on drawing and as directed by Engineer-in-Charge.

TABLE WRITING 1145X600X760MM (FD-275)

Replacement of unserviceable top of table writing and Supply and Fixing new top of prelaminated particle board 18/19mm thick teak shade and white lamination on other side including wooden beading all around the top, complete all as specified and directed by Engineer-in-Charge.

Replacement of unserviceable drawer of table writing and Supply and Fixing new drawer, complete all as shown on drawing and as directed by Engineer-in-Charge.

Replacement of unserviceable legs of table writing of first grade seasoned teak wood as per drawing complete all as specified and directed by Engineer-in-Charge.

Replacement of unserviceable stiffener of first grade seasoned teak wood as per drawing complete all as specified and directed by Engineer-in-Charge.

Replacement of unserviceable drawer door of table writing and Supply and Fixing new drawer door with hinges, complete all as shown on drawing and as directed by Engineer-in-Charge.

Providing of PVC hard rubber shoes to thelegss of the table to make its balance complete all as shown on drawing and as directed by Engineer-in-Charge.

SOFA SET 5 Seats / 5 Seats (FD-281 /373 etc):-

Replacement of foam cushion of 32 density of size 550 x 530 x 100mm duly covered with tapestry cloth of shade and colour/quality as approved by engineer-in-charge, The rate of tapestery shall not be less to Rs 200/- per running meter.

S&F cover for foam cushion of size 555x530x100mm made out of tapestery cloth of approved pattern, texture, shade and colour with fixing a good quality zip at one side in replacement to the old damaged cushion cover.

SOFA SET 5 SEATER (TP / SPL) Taking out the old damaged / wornout tapestery cloth, cloth hassion, cloth marking and damaged wooden parts of the sofa chairs, reparing the damageged structures and replacement of wooden membrances with kail wood memberances, providing new GI springs, cloth marking coir fiber, foam cushion 40 (d) and fixing of arms with peoper worksmanship. the tapestery cloth shall be of best quality and of approved pattern, colour / shade for covering the entire structure of the sofa chairs.

DRY CLEANING Dry cleaning to the entire seat / back/ arms/ base etc to any kind of chirs having tapestery / cloth letheritic etc like chair confrence/ chir revolving all kind/ chir easy / chair writing / chair cinema/ chir visitors etc with sy-detergents and other dry cleaning agents to clean the sufraces of seats and backs of chairs (including all surfaces expose to vision) etc to make the tapestry / cloth letheretic neat and clean, it also includes cleaning of handlles and the PVC base of the chair. Each chair includes its seat, back, base and all expose to vision portions

CHARPOY GI PIPE (FD 220, FD 220 (R))

Removing of broken long rails of GI pipe charpoy and supply and fixing new long rail of GI tubing 32m dia medium grade duly threaded complete all as specified and directed. Make : Prakash, Surya, Jindal

Conversion of long rails into short rail, duly threaded and fixing to charpoy after removing broken short rails complete all as specified and directed by Engineer-in-Charge.

Conversion of short rails into legs, duly threaded and fixing to charpoy after removing broken short rails, complete all as specified and directed BY Engineer-in-Charge.

Replacement of damaged and unserviceable GI elbows with new 3 way 32mm medium grade , ISI marked complete all as specified and directed by Engr-in-charge.

Replacement of damaged and unservicable check nuts with new check nuts 32 x 10mm and fixing on long rail complete all as specified and directed.

Removing plywood top from charpoy GI and replacing with new plywood commerical type12mm thick, 6 ply, fixed with counter sunk nut and bolts with steel washers and replacing damaged nut and bolts and MS flat stiffnener as required of 40 mm x 6 mm , complete all as specified and directed by the Engineer-in-Charge.

Conversion of charpoy GI nylon newar into charpoy GI with plywood top with 12mm commercial plywood 6 ply, 02 No of Stiffener of MS plate 900mmx 40mm x 5mm thick shall be provided and welded long rail to long rail of charpoy GI pipe duly painted with black sy-enameled paint after a coat of red oxide, plywood shall be fixed with counter sunk nut & bolt of 60mm x 6mm with washers and fixed to plywood top complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 18/19 mm thick Pre laminated particle board one side teak face and one side white lamination (ISI Marked) for different table tops and other parts of furniture of OTM / MD steel furniture / Wooden furniture, of existing size and pattern with 4mm thick 18mm wide well polioshed Teak Wood beading etc all as directed.

S&F in repairs 12 mm thick Pre laminated particle board one side teak face and one side white lamination (ISI Marked) for different parts of furniture of OTM / MD steel furniture / Wooden furniture, of existing size and pattern to make functional the furniture article.

S&F in repairs 12 mm thick Plywood commerial for different parts of furniture of OTM / MD steel furniture / Wooden furniture, of existing size and pattern with using approprate size screws whereever required, fevicol SH, teakwood beading if required to the exposed surfaces with full worksmanship.

S&F in repairs 18/19 mm thick Plywood commerial for different parts of furniture of OTM / MD steel furniture / Wooden furniture, of existing size and pattern with using approprate size screws whereever required, fevicol SH, teakwood beading if required to the exposed surfaces with full worksmanship.

S&F in repairs 4mm thick Plywood commerial for different parts of furniture of OTM / MD steel furniture / Wooden furniture, of existing size and pattern with using approprate size screws whereever required, fevicol SH, teakwood beading if required to the exposed surfaces with full worksmanship.

S&F hardwood teak (scatlingls) in repairs after remaoving damaged parts of wooden / steel furniture with suitable sizes as required in repairs to make functional and useable the furniture items with the help of fevicol SH, apprprate size screws, bamboo pins with proper worksmanship.

CHAIR CONFERENCE WITH CUSHIONED SEAT & BACK (Special)

S&F in Replacement of cloth leatherite / Tapestry of colour and pattern as approved , material for upholstering like foam cushion, 28 density and other required materials shall be of best quality, PVC shoes for legs of the chairs ,complete all as specified and directed by the Engineer-in-charge.

CHAIR CUSHIONED SEAT & BACK (Special) / (TP)

S&F in Replacement of leatherite cloth of colour and pattern as approved , material for upholstering like foam cushion, 28 density and other required materials shall be of best quality, PVC shoes for legs of the chairs, complete all as specified and directed by the Engineer-in-charge.

Chair school / chair examination / chair /TP FD/E6 MAP

S&F new seats PVC (blowplast/supreme/amco or equivlant) after removing old damaged seats fixing shall be done with approprate size screws and washers. Colour and pattern as approved by the engr in charge.

S&F new hand rest on the chair examination / chair school / chair with hand rest made out of 18 mm thick plank of Teakwood well seasoned and attached with pyno hingis shape and size as mentioned in drg.

Painting to the steel structure of the chair in two coats of best quality paint with best worksmanship.

Repair to Chair Revolving Executive / Chair revolving long back

Supply and fixing with welding work & removing and fixing of unserviceable part as per pattern of Durun / complete assy complete all as specified and directed by Engineer-in-Charge.

Removing of unserviceable fabric, foam cushions of seat and back and upholistring of existing chair computer with new fabric, new foam 50mm thick high density (32 density) for seat and back rest as per best trade practice Note : Min price range for cloth is Rs 200/- per mtr

Taking out Unserviceable base for chair and S&F new base complete in all respects as pe requirement and duly functional, all as specified and directed.

Removing of Unserviceable hand rest and S & F new hand rest of best quality as approved and required to make functional the chair

Replacement in Repair of padestal assembly as per sample available in BS Yard

S&F the PVC caster wheels pin type to the base of the chair revolving to make the chair and base proper functional.

S&F the PVC caster wheels Screw type to the base of the chair revolving to make the chair and base proper functional.

S&F SS knobs of approved shape to the furniture items like, table computer, table dressing gents, table dressing ladies etc with approprate size nut bolt and washer.

S&F SS Handles 4" long to the wooden / steel furniture where ever required for different Drawers of tables, dressing tables, table bed side, Side boards, Bin linenes, keyboars, mouse boards etc in repairs with approprate size SS screws with washiers to make functional the furniture articles.

Deduction to be made from BOQ for Schedule 'A' Part-II (Credit Schedule from dismentling/taking down items) worth Rs 76,807.00 during AOC. Note :- Tenderers shall not quote for this Schedule.

M/S HARJEET ENTERPRISES (BID ID -3110681)

DUKE CONSTRUCTION (BID ID -3106302)

MEHAK STEEL INDUSTRIES (BID ID -3110444)