GE/DE-77/2021-22 SPECIAL REPAIRS TO BLDG NO P-21 AND P-25, PROVN OF SHED PLATFORMS PAVED FLOORING AT DGRR AND 04 MINOR WORKS IN THE AREA OF AGE BR III UNDER GE (EAST) DELHI CANTT-10

Amount

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, including racking out joints, hacking for key, scrubbing down with water etc., to receive new plaster, complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5Sqm each, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5Sqm but not exc 4Sqm each, complete all as specified and as directed.

Taking out exisitng roof treatment with any type of membrane, wire brushing and cleaning top surface of tiles, cement concrete, including flashings and junction of parapets including taking out grass roots/vegetation etc., from existing roof surfaces and cleaning the surface after drying from dirt, mortar, dust mortar buds, algae and all other foreign matter and brushed and wiped and drying the cleaned surface for further treatment, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) & removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Dismantling wall & ceiling boards (fibre, insulation etc ) or insulation boards, slabs, blankets any thickness including frame work of any type and cover fillets, complete all as specified and as directed.

Dismantling steel (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as specified and as directed.

Dismantling structural steel work of any description not other wise provided for, complete all as specified and as directed.

Taking down steel tubing and connections including cleaning for refixing or removal from site for bore of pipe 15mm, complete all as specified and as directed.

Taking down steel tubing and connections including cleaning for refixing or removal from site for bore of pipe 20mm, complete all as specified and as directed.

Taking down AC external unit/Dish TV antenna from roof carefully and reinstalling in same location after carrying out roof treatment work, complete all as specified and as directed.

Dismantling existing water tanks of capacity exc 500 & not exceeding 1000 ltrs lowering from its position and removal to store, complete all as specified and as directed.

Excavation in trenches not exceeding 1.5mtr wide and not exceeding 1.5mtr deep and getting out complete in soft/loose soil, complete all as specified and as directed.

Returning, filling in, including spreading, leveling watering and well raming in layers not exceeding 25cms thick complete all as specified and as directed.

Removal of surplus soil to a distance not exceeding 50mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified and as directed.

Hard core of gauge not exceeding 63mm stone aggregate, deposited, spread and levelled in layers not exceeding 15 cm thick watering and ramming to a true surface, complete all as specified and directed.

Plain cement concrete 1:4:8, Type D-2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete all as specified and as directed.

PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in roof kerb, mud stops, platform for OHT, etc., and similar type of works including weathering, slightly rounded or chamfered angles, complete all as specified and as directed.

RCC 1:1.5:3 type A-1 ( using 20mm graded crushed stone aggregate) as in roof/floor slabs supported on walls, beams and shelves etc., complete all as specified and directed.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6mtr mean radius built in cement mortar 1:6, complete all as specified and as directed.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6mtr mean radius built in cement mortar 1:4, complete all as specified and as directed.

Use and waste of form work to soffits of suspended slabs such as roof slabs, shelves etc., not exceeding 200mm thickness for fair finished concrete surfaces, complete all as specified and as directed.

18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including 10 mm thick screed bed in cement mortar 1:4 including rounding to edge of granite as per required, complete all as specified and as directed.

1st class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

Factory made 35mm thick 1st class hard wood for plain framed panelled shutters (any number of panels) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rail & style as per IS: 1003(Part 1), kiln seasoned and chemically pressure treated, complete all as specified and as directed.

Fabrication & fixing of Modular kitchen cabinet & wardrobe/ cupboard made out of 15-18 mm thick HDHMR action tesa or century with 0.8mm fabric colour laminate after approval and all exposed sides with edge band 0.8mm from rehau German including providing cabinet for keeping baskets/ cutlery basket etc, complete all as specified and as directed. (Design and pattern as approved by GE). Note:- Kitchen accessories ie baskets, cutlery baskets, fittings and fixture will be measured and paid separately).

Modular kitchen cabinet & wardrobe/ cupboard made out of 8-10mm thick HDHMR with laminated fabric colour on both sides complete all as specified and as directed.

Supply only Stainless steel basket (plain) of size 500mm x 370mm x 100mm made of 4mm thick S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers, complete all as specified and as approved by Engr-in-Charge. Make: Life style Cat part No WA/POB/15204 or equivalent approved by Engr-in-Charge.

Supply only Stainless steel thali basket (11-13 division) of size 500mm x 370mm x 200mm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS/SS galvanised over rollers, complete all as specified and as approved by Engr-in-Charge. Make: Life style Cat part No WA/TB/15208 or equivalent approved by Engr-in-Charge.

Supply only Stainless steel Plate basket (11-13 division) of size 500mm x 370mm x160mm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS/SS galvanised over rollers, complete all as specified and as approved by Engr-in-Charge. Make: Life style Cat part No WA/PTH/15206 or equivalent approved by Engr-in-Charge.

Supply only Stainless steel Partition basket of size 500mm x 370mm x 160mm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18''/20'' length two way extruded MS/SS galvanised over rollers, complete all as specified and as approved by Engr-in-Charge. Make: Life style Cat part No WA/PRT/17206 or equivalent approved by Engr-in-Charge.

Supply only Stainless steel Cutlary basket of size 500mm x 370mm x 100mm made of 4mm th S.S.wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing Telescope basket (channel) 18''/20'' length two way extruded MS galvanised over rollers,complete all as specified and as approved by Engr-in-Charge. Make: Life style Cat part No WA/CUT/15204 or equivalent approved by Engr-in-Charge.

Continuous (piano) hinges, Mild Steel, bright finish or electrogalvanised (width of flap 40mm when open) complete all as specified and as directed.

Brass handles fancy type bright polished 100mm size, complete all as specified and as directed.

Brass butt hinges of size 150 mm for shutters, complete all as specified and as directed.

150 mm size fancy type Brass handles cast type, complete all as specified and as directed.

150mm fancy type Brass barrel tower bolts of extruded section and fixed, complete all as specified and as directed.

300 mm size brass siding door bolts, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminiums alloy and fixed, complete all as specified and as directed.

Stainless steel Curtain Rod 20 mm dia with holders fixed to wall etc., fixed in repairs, complete all as specified and as directed.

Stainless steelfancy type bracket with new screws for curtain rod, fixed in repairs, complete all as specified and as directed.

Aluminium alloy powder coated windows including aluminum powder coated frames sliding track, bottom weighing not less than 1.015 Kg/RM, sides and top not less than 0.826 kg/RM double revated and 0.55 Kg for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windows with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings, complete all as specified and as directed.

Aluminum alloy powder coated door including frame and channel of section (Door frame single groove 101.6mm x 44.45mmx2.1mm, shutter top section 47.62mm x 44.45mmx1.95mm thick, shutter bottom section 114.30mm x 44.45mm x 2.15mm thick, shutter vertical section 85mm x 44.45mm x 1.80mm thick, shutter middle section 83.50mm x 44.45mm x 2.40mm thick & glazing clips weighing not less than 0.097 kg/RM) incl shutter fixed to sliding type/openable frame and channel as directed and approved by GE and as per IS specifications including provn of 5.5mm thick tinted glass/12mm thick prelaminated particle board as required including handles, tower bolt, floor spring heavy duty “SAMRAT”, locking arrangement “GODREJ”, rubber gasket and door stopper, complete all as specified and as directed.

Providing and fixing factory made UPVC (white colour casement (Openable) Door made of extruded profile with wall thickness of 2.3mm having profileof hollow section with multi chamber. Frame size (60mmx58mm), sash (60minx78mm), T profile having one vertical length in between two shutters of size (60mmx 74mm) glazing head (35mmx 20mm) mitered cut and fusion welded at all corners including making holes for fixing hardware and drainage of water, provision of EPDM gasket 1.2 thick galvanised steel frame (28mmx21.50mm), sash (31mmx27mm). T profile (27x17mm) to inserted in required profile frame will be fixed to wall with 8mm x 100mm long fasteners including necessary hardware viz casement (door handle,tower bolt,stopper,locking arrangemnt,and other acceessories )made of zinc alloyed (white powder coated), corner striker, secondary strikers, cylinder, transmission gear made of mild steel with multi point locking system with strikes, hinges of zinc alloyed (white powder eoated) complete all as specified and as directed. (Note : a) The unit rate quoted by contractor included cost of glass and board. Net opening will be measured for payment purpose. b) Overall net size including frame will be measured for payment purpose) Make:-Okotech Aparno, H20 Solution, Fenesta or equavalent

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally for hopping for columns, hooking ends, and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-S or Fe-410-0, complete all as specified and as directed.

Structural steel work in tubular Roof trusses including special shaped washers etc., com pete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240, complete all as specified and as directed.

3mm thick fiber glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc and including dismantling of plain or corrugated sheeting any gauge thickness including Nainital or similar pattern as in roof covering, complete all as specified and as directed. complete all as specified and as directed.

Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

Providing screed bed 15mm thick on top of cleaned concrete surfaces in cement mortar 1:4 mixed with water proofing compound, including taking down cement plaster on concrete surfaces, including raking out joints, hacking for key, scrubbing down with water etc., to receive further treatment, complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under respective item.

Supply only liquid water proofing compound, to be mixed in cement mortar or concrete as per proportion specified by manufacturer, complete all as specified and as directed.

Applying evenly a coat of bituminous primer conforming to IS- 3384 @ 0.4Ltr/Sqm. Over the primed surface, apply a coat of hot blown 85/25 penetration grade bitumen conforming to IS- 702 @ 1.2 Kg/Sqm of the surface area. Applying APP based polymeric mambrane minimum weight 3.6kg/Sqm and of minimum thickness 3mm, reiforced with polyster non woven fabric ( weight not less than 150gm/Sqm ). APP membrane will be laid by torching overlaps with a propane or butane gastorch and laid across the slope from lowest line of roof towards ridge with over laps of 75mm in length side and 100mm on the width side of membrane bonded with hot blown bitumen. Over the APP membrane finally applying a coat of Solar reflective Paint @ 0.30Ltr/Sqm complete all as specified and as directed.

E-board 'Everest' make 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction complete all as specified and as directed.

100mm thick Cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing, complete all as specified and as directed.

75mm thick Cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing, complete all as specified and as directed.

Pre-polished, coloured chequered cement concrete tiles, factory made, Premium quality 300mm x 300mm x 25mm thick, set & jointed in neat cement slurry and pointed flush with grey cement and pigments to match colour of tiles in floors/path etc over 15 mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and as directed.

60mm thickness, M-35 Grade Machine pressed precast concrete interlocking paver block any shape and size with grey cement and no pigment confirming to IS 15658-2006, set in floors/hardstanding/path etc laid over 50mm thick sand cushioning layer, complete all as specified and as directed.

Machine cut kota stone slab 18-20 mm thick as in flooring laid over and incl cement screed bed 20 mm thick in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed.

Heavy duty external vitrified designer floor tiles, parking tiles etc., of any colour, shape and size not less than 300mm x 300mm x 8-10mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over 15 mm thick avg screed bed in cement mortar 1:4, complete all as specified and as directed.

Vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.18Sqm, on vertical surface such as in skirting/dado etc over backing coat of 10mm thick rendering cement mortar (1:4), complete all as specified and as directed.

Vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over 15 mm thick avg screed bed in cement mortar 1:4, complete all as specified and as directed.

Vitrified ceramic tiles dark shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over 15 mm thick avg screed bed in cement mortar 1:4, complete all as specified and as directed.

Vitrified tiles dark shade 10mm thick (square/rectangular) area of each tile exceeding 0.42Sqm tile not exceeding 1.00Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over 15 mm thick avg screed bed in cement mortar 1:4, complete all as specified and as directed.

Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile not exceeding 0.11Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over 15 mm thick average screed bed in cement mortar 1:4, complete all as specified and as directed.

Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over 15 mm thick average screed bed in cement mortar 1:4, complete all as specified and as directed.

Coloured Glazed ceramic tiles in vertical surface 300mm x 200mm x 7-8 mm thick, such as skirting, dados, etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over 10mm thick screed bed in cement mortar 1:4, complete all as specified and as directed.

Coloured Glazed ceramic tiles in vertical surface 600mm x 300mm x 7-8 mm thick, such as skirting, dados, etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over 10mm thick screed bed in cement mortar 1:4, complete all as specified and as directed.

Wooden interlocking floor tiles (Wooden flooring) of size 1215mm x 168mm x 8mm thick rectangular tiles fixed in floor/dado over existing floor with foam sheet of best quality including jointing/end covering strip including all other fixing materials, complete all as specified and as directed. Make kajaria catlog No AC 3 or equivalent in Somany/Cera.

Wall cladding tiles of size 300mm x 450 mm or 300mm x 600 mm & 8-12 mm thick on vertical surfaces of wall / concrete surface over 10mm thick cement plaster bed in 1:4 (Design & shade as per sample approved by GE), complete all as specified and as directed.

15mm thick polymer modified readymix cement based plaster Make : Ultratech (Brand name Readiplast) complying to IS-1661-1972, IS-2250-1965, IS-2402-1963) or equivalent as approved by GE, applied in ratio 1:4 as per manufacturer's instructions, on fair faces of brick masonry or concrete surfaces finished even and smooth, complete all as specified and as directed.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement, complete all as specified and as directed.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement, complete all as specified and as directed.

Rendering 5mm thick on fair faces of ceiling surfaces in cement mortar 1:3 and finished even and smooth without using extra cement, complete all as specified and as directed.

Application of Professional wall putty 1.5mm thick with mixing vitalia water proofing compound. (Make : Asian Paint or equivalent) after Scrapping of the old surface including brooming down all old spots and algai etc to the complete satisfaction of GE, complete all as specified and as directed.

Application of Smart care damp proof of Asian Paint product, complete all as specified and as directed. as follows:- (i) 1st Coat- Application of Self priming coat damp proof with 33% water . (ii) 2nd coat- Neat coat of damp proof after 4-6hrs drying of self priming coat or saturated surface drying condition. (iii) Third coat- Neat coat after 4-6 hrs after first neat coat or saturated surface drying Condition.

2 coats of Asian paint apex ultima protek (coverage area 5-6 Sqm/Ltr) including preparation of surface, complete all as specified and as directed.

Application of Asian paints damp block 2K (Make : Asian Paint or equivalent) complete satisfaction of GE, complete all as specified and as directed.

Preparation of new plaster internal wall and ceiling surfaces of upto 4 storey buildings, boundary walls and applying a layer of 1mm thick wall care putty, again sand papering thus making surface smooth and applying Two coats of Interior plastic emulasion paint premium quality, complete all as specified and directed.

Preparation of newly plastered external surfaces of walls and ceiling and applying a layer of Birla White/J K White wall care putty, again sand papering to make surfaces smooth and applyingg Two coats of weather proofing exterior acrylic emulsion paint premium quality on wall surfaces over a coat of wall primer, complete all as specified and as directed.

Preparation of newly plastered external surfaces of walls and ceiling and applying two coats of ce,ment based paint, complete all as specified and as directed.

Preparation of Old plastered/unplastered surfaces of walls and applying a layer of 2-3mm thick Birla White/J K White wall care putty, again sand papering thus making surface smooth and applying Two coats of exterior acrylic emulsion paint premium quality over a coat of wall primer, complete all as specified and as directed.

Preparation of Old plaster/unplastered surfaces of walls and ceilings upto 4 storied buildingsand applying a layer of Birla White/J K White wall care putty, again sand papering thus making surface smooth and applying Two coats of Interior acrylic emulsion paint on wall surfaces over a coat of wall primer, complete all as specified and as directed.

Preparation of new wooden surfaces and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description, not otherwise described over 10cm width or girth, complete all as specified and as directed.

Preparation of new steel surfaces and applying two coats of synthetic enamel paint on surfaces of any description exceeding 10 cm width or girth over a coat of red oxide, complete all as specified and as directed.

Stainless Steel letters of stainless steel 304 grade (letter size 8" x 12" and upto 2" depth or as approved by GE) placed on platforms i.e. on granite wall at various locations of Parade Road including all fittings and fixtures for fixing of letters, complete all as specified and as directed. Note : (a) Letters to be fixed on 05 Nos of vertical platforms. (b) A maximum number upto 60 stainless steel letters to be fixed on one platform board.

Steel water tubing galvanised 15mm bore medium grade fixed to walls, under floors and on ceiling surfaces, complete all as specified and as directed.

Steel water tubing galvanised 20 mm bore medium grade fixed to walls, under floors and on ceiling surfaces, complete all as specified and as directed.

Rotational moulded polythylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore, complete all as specified and as directed.

Rotational moulded polythylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore, complete all as specified and as directed.

Vitreous china floor mounted WC (Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover CP jet spary, flushing cistern, with P or S trap with all fitting and fixture, fixed in repairs., complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. LYS-WHT-38851S300UFSMN Jaquar-Cat No. LYS-WHT-38851S220UFSMN, Kohler-Cat No. K-17629IN-SM-0

Sinks (Double bowl) made of stainsless steel 1mm thick as in kitchen with plugs, washers and wastes, including bedding in cement mortor on to dwarf walls or including cantilever brackets and connecting union to pipe overall size 915mmx460mm, double bowl (each bowl size 410mm x 330mm x 160mm), fixed in repairs, complete all as specified and as directed. (Make : Nirali/Jayna/Diamond)

Vitreous china wash basin counter oval type size 600x425x195mm, fixed in repairs, under granite slab with all fitting and fixture, fixed in repairs, complete all as specified and as directed. Make Jaquar/Cera/Hindware

Brass CP basin mixer central hole, for mixing hot and cold water fixed as per manufacture's manual, with long shunk and cup washers, screwed both ends suitable for 15mm bore GI pipe joints to GI pipes or unions, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. KUP-35051BPM, Jaquar-Cat No. KUP-35005BPM, Kohler-Cat No. K-74013IN-4BND-CP, Kohler-Cat No. K-74026IN-4BND-CP

Brass chromium plated wall mixture 3 in 1 system with provision for hand shower and overhead shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls, fixed in repairs, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. CON-281KN Jaquar-Cat No. COP-281PM Kohler-Cat No. K-98754IN-4-CP

15mm bore brass chromium sink mixer of mixing 'Hot' and 'Cold' water, with swinging point screwed down for iron pipe, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. CON-309KNM Jaquar-Cat No. COP-309PM Kohler-Cat No. K-37338IN-4CP

Bib taps, (Long body) cast copper alloy fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe15mm bore, fixed in repairs, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. CON-047KN Jaquar-Cat No. CON-107KN Kohler-Cat No.K-37341IN-4-CP

Ready made floor/wall mounted Vanity box made of HDHMR board, both side laminated, fixed in repairs, complete all as specified and as directed. consisting of the following combination :- (a) Wash Hand Basin 810mm x 500mm. (b) Base Cabinet 780mm x 485mm x 460mm. (c) Side Cabinet 300mm x 250mm x 1800mm. (d) Mirror cabinet size 780mm x 160mm x 800mm. Make : Hindware - Cat Part No. 70089 or 70084/ Kohler : Cat Part No. K-31602IN-E63

Brass chromium plated towel rack of size 600 mm x 350mm, fixed with brass screws, fixed in repairs, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)

Towel ring fixed in positon with and including chromium plated brass screws and wooden/plastic cleats, fixed in repairs, complete all as specified and as directed. (Make : Jaquar/Marc/Kohler).

CP brass soap dish, fixed in repairs, complete all as specified and as directed (Make : Jaquar/Marc/Kohler).

Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc., complete all as specified and as directed.

Angle valve 15mm bore dia or pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, fixed in repairs, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. CON-059KN Jaquar-Cat No. COP-057PM Kohler-Cat No.K-80158IN-9-CP

15mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe, fixed in repairs, complete all as specified and as directed.

20mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe, fixed in repairs, complete all as specified and as directed.

Wall mounted multiple function Shower Panel including all acessories and fittings, fixed in repairs, complete all as specified and as directed. Make : Hindware Cat Part No. 511686 (size 1650mm x 150mm x 550mm)/Jaquar Cat Part No. JPL-SSF-ST88148B(size 1600mm x 200mm) or JPL-WHT-TMCURVENEO (size1500mm x 230mm) or eqivanlent in Cera/Somany

NOTE:- Irrespective of whatever specified elsewhere in tender documents, all the debris/waste materials produced out of above mentioned work shall be removed out of Cantonement land and disposed off at locations notified by the Delhi Cantonment Board for disposal of waste building materials within NCR area, without any extra cost to Department under own arrangement of contractors. The rates quoted by the contractors against the items catered here-in-above in the BOQ are inclusive of said provision.

M/s Shubh Enterprises

THE LOTUS BUILDTECH

Akhil Enterprises