Loading…
Loading…
Tender Value
₹4.8 Cr
EMD Value
₹9.6 L
Closing Date
16 Jul 2026, 4:00 pm
Similar tender results from the same govt authority in the past 3 years.
improvement of parking area, Increase of PF width by cutting the earthwork and pitching and carryout the work of crossing FOB, etc. in phase 2 under ABSS at Kotdwar station under Moradabad Division.
95-DRM-MB-26-27
95-DRM-MB-26-27
Open
8 Months
Moradabad, Uttar Pradesh
₹0
₹9.6 L
23 Jun 2026
23 Jun 2026
2 Jul 2026
Item Breakup - A-DSR - 2021 ITEMS
slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 11.37S CERAMIC GLAZED TILES 11.37A Providing and fixing 1st quality ceramic glazed Sqm 30 938.5 28155 floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, 4 risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 11.41S VITRIFIED FLOOR TILES Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm 11.41A including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of 11.41A.1 size 5 11.41A.1.1 Size of Tile 600 x 600 mm Sqm 10 1286.6 12866 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in 11.46 skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. 6 11.46.2 Size of Tile 600x600 mm Sqm 10 1466.5 14665 MORADABAD DIVISION-ENGINEERING/NORTHERN RLY Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 11.55 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : 11.55.1 Flamed finish granite stone slab Jet Black, Sqm 312 2589.9 808048.8 7 Cherry Red, Elite Brown, Cat Eye or equivalent. Total 1341857.55 Item- 11 All items of Sub Head-12 (Roofing) of DSR-2021 (Except banned item) S No. Item No Description of Item Unit Qty Rate Amount 12.0 ROOFING 12.1S SHEET ROOFING Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone 12.21 aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 1 12.21.1 In 75x75 mm deep chase Metre 250 260.2 65050 Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry surrounded with 12 mm thick 12.40 cement mortar of the same mix, as that of masonry (lead caulking will be paid for separately): Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring 12.41 conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 2 12.41.2 110 mm diameter Metre 560 319.75 179060 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes 12.42 conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 12.42.1 Coupler 3 12.42.1.2 110 mm Each 15 119.95 1799.25 12.42.3 Single tee with door 4 12.42.3.2 110x110x110 mm Each 7 205.45 1438.15 12.42.5 Bend 87.5 degrees 5 12.42.5.2 110 mm bend Each 12 132 1584 12.42.6 Shoe (Plain) 6 12.42.6.2 110 mm Shoe Each 4 115.95 463.8 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of 12.43 required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 7 12.43.2 110 mm Each 5 309.5 1547.5 MORADABAD DIVISION-ENGINEERING/NORTHERN RLY 12.50 Providing and fixing precoated galvanised iron Sqm 1090 671.55 731989.5 profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5- 7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 8 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa 12.51 steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : 9 12.51.1 Ridges plain (500 - 600mm) Metre 204 450.6 91922.4 10 12.51.6 Gutter (600 mm over all girth) Metre 5 1110.6 5553 Total 1080407.60 Item- 12 All items of Sub Head-13 (Finishing) of DSR-2021 (Except banned item) S No. Item No Description of Item Unit Qty Rate Amount 13.0 FINISHING 13.1S CEMENT PLASTER (IN FINE SAND) 13.1 12 mm cement plaster of mix : 1 13.1.2 1:6 (1 cement: 6 fine sand) Sqm 35 282 9870 15 mm cement plaster on the rough side of 13.2 single or half brick wall of mix : 2 13.2.2 1:6 (1 cement: 6 fine sand) Sqm 35 324.3 11350.5 13.4S CEMENT PLASTER (IN COARSE SAND) 13.4 12 mm cement plaster of mix : 3 13.4.1 1:4 (1 cement: 4 coarse sand) Sqm 210 307.25 64522.5 4 13.4.2 1:6 (1 cement: 6 coarse sand) Sqm 1410 294.35 415033.5 15 mm cement plaster on rough side of single 13.5 or half brick wall of mix: 5 13.5.2 1:6 (1 cement: 6 coarse sand) Sqm 680 339.1 230588 13.6 20 mm cement plaster of mix : 6 13.6.1 1:4 (1 cement: 4 coarse sand) Sqm 5 421.4 2107 CEMENT PLASTER WITH A FLOATING COAT OF 13.7S NEAT CEMENT 12 mm cement plaster finished with a floating 13.7 coat of neat cement of mix : 7 13.7.2 1:4 (1 cement: 4 fine sand) Sqm 55 361.3 19871.5 15 mm cement plaster on rough side of single 13.8 or half brick wall finished with a floating coat of neat cement of mix : 8 13.8.2 1:4 (1 cement: 4 fine sand) Sqm 285 406.1 115738.5 13.16S 6MM CEMENT PLASTER 13.16 6 mm cement plaster of mix : 9 13.16.1 1:3 (1 cement : 3 fine sand) Sqm 400 253.05 101220 13.25 Extra for plastering: MORADABAD DIVISION-ENGINEERING/NORTHERN RLY 13.26 Providing and applying plaster of paris putty Sqm 20 214.3 4286 of 2 mm thickness over plastered surface to 10 prepare the surface even and smooth complete. 13.31S POINTING ON BRICK WORK Pointing on brick work or brick flooring with 13.31 cement mortar 1:3 (1 cement : 3 fine sand): 11 13.31.1 Flush / Ruled/ Struck or weathered pointing Sqm 40 214.4 8576 13.44S EXTERIOR FINISHING Finishing walls with water proofing cement 13.44 paint of required shade : 13.44.1 New work (Two or more coats applied @ 3.84 Sqm 740 97.6 72224 12 kg/10 sqm) Finishing walls with Acrylic Smooth exterior 13.46 paint of required shade : 13.46.1 New work (Two or more coat applied @ 1.67 Sqm 40 166.85 6674 13 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) Finishing with Deluxe Multi surface paint 13.48 system for interiors and exteriors using Primer as per manufacturers specifications : 13.48.1 Two or more coats applied on walls @ 1.25 Sqm 995 158.95 158155.25 14 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm 13.50 Applying priming coat: 13.50.1 With ready mixed pink or Grey primer of Sqm 50 61.45 3072.5 15 approved brand and manufacture on wood work (hard and soft wood) 13.50.3 With ready mixed red oxide zinc chromate Sqm 100 55.5 5550 16 primer of approved brand and manufacture on steel galvanised iron/ steel works Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per 13.52 manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. 17 13.52.1 On steel work Sqm 680 201.7 137156 Painting with synthetic enamel paint of 13.61 approved brand and manufacture to give an even shade : 18 13.61.1 Two or more coats on new work Sqm 520 131.45 68354 Painting with aluminium paint of approved 13.63 brand and manufacture to give an even shade . 19 13.63.1 Two or more coats on new work Sqm 60 121.45 7287 Applying priming coats with primer of 13.85 approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. 13.91 Removing dry or oil bound distemper, water Sqm 80 20.85 1668 proofing cement paint and the like by 20 scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Wall painting with plastic emulsion paint of 13.98 approved brand and manufacture to give an even shade: 21 13.98.1 One or more coats on old work Sqm 35 90.85 3179.75 Painting with synthetic enamel paint of 13.99 approved brand and manufacture of required colour to give an even shade : 22 13.99.1 One or more coats on old work Sqm 50 86.55 4327.5 Finishing walls with textured exterior paint of 13.110 required shade : MORADABAD DIVISION-ENGINEERING/NORTHERN RLY 13.110.2 Old work (One or more coats) applied @ 1.82 Sqm 170 118.85 20204.5 23 ltr/10 sqm. Total 1471016.00 Item- 13 All items of Sub Head-15 (Dismantling and Demolishing) of DSR-2021 (Except banned item) S No. Item No Description of Item Unit Qty Rate Amount 15.0 DISMANTLING AND DEMOLISHING Demolishing cement concrete manually/ by mechanical means including disposal of 15.2 material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c cum 190 2007.1 381349 1 equivalent design mix) 15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c cum 150 1239.6 185940 2 equivalent design mix) 15.3 Demolishing R.C.C. work manually/ by cum 8 2928.1 23424.8 mechanical means including stacking of steel 3 bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. Demolishing stone rubble masonry manually/ by mechanical means including stacking of 15.9 serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : 4 15.9.2 In cement mortar cum 146 2027.1 295956.6 15.18 Dismantling steel work in built up sections in Kg 170 4.65 790.5 angles, tees, flats and channels including all 5 gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. Dismantling roofing including ridges, hips, 15.28 valleys and gutters etc., and stacking the material within 50 metres lead of: 6 15.28.2 Asbestos Cement sheet Sqm 10 63.75 637.5 15.56 Dismantling old plaster or skirting raking out Sqm 10 45.05 450.5 joints and cleaning the surface for plaster 7 including disposal of rubbish to the dumping ground within 50 metres lead. 15.60 Disposal of building rubbish / malba / similar cum 1030 219.35 225930.5 unserviceable, dismantled or waste materials by mechanical means, including loading, 8 transporting, unloading to approved municipal dumping ground or as approved by Engineer- in-charge, beyond 50 m initial lead, for all leads including all lifts involved. Total 1114479.40 Item- 14 All items of Sub Head-16 (Road Work) of DSR-2021 (Except banned item) S No. Item No Description of Item Unit Qty Rate Amount 16.0 ROAD WORK 16.1S ROADS 16.1 Preparation and consolidation of sub grade Sqm 900 180.5 162450 with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and 1 consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. 16.42S CONCRETE PAVEMENTS 16.42 Cement concrete 1:2:4 (1 cement : 2 coarse cum 226 7399.2 1672219.2 sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required 2 slope and camber in panels as required including consolidation finishing and tamping complete. MORADABAD DIVISION-ENGINEERING/NORTHERN RLY 16.44 Extra for providing and mixing hardening Litre 30 48.15 1444.5 compound of approved quality as per 3 manufacturer's specification in cement concrete. 16.47S PAINTING AREA/RUNWAY MARKING Painting runway/taxi track/apron marking with adequate nos of coats to give uniform finish with road marking paint of superior make as 16.47 approved by the Engineer-in-charge, i/c cleaning the surface of all dirt, scales, oil, grease and other foreign material etc. and lining out complete. 4 16.47.1 New work (Two or more coats) Sqm 50 158.5 7925 Painting road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking paint conforming to IS : 16.48 164, on bituminous surface in white/yellow shade, including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete. 5 16.48.1 New work (Two or more coats) Sqm 5 239.95 1199.75 16.49S MISCELLANEOUS 16.64 Providing and laying 75 mm thick compacted Sqm 80 196.3 15704 bed of dry brick aggregate of 40 mm thick nominal size including spreading, well 6 ramming, consolidating and grouting with Local sand, including finishing smooth etc. complete as per direction of Engineer-in- charge. 16.68 Providing and laying 60mm thick factory Sqm 400 951 380400 made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in 7 required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. 16.69 Providing and laying at or near ground level cum 38 8613.55 327314.9 factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp 8 curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in- charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in- charge). 16.72 Supplying and stacking of hard stone (for cum 500 1060.8 530400 9 stone pitching) 22.5 cm thick at site. 16.73 Dry stone pitching 22.5 cm thick laid in Sqm 2100 542.85 1139985 courses and required profile with hammer dressed stones having no side less than 15 10 cm, with minimum depth of 20 cm including preparing the bedding surface etc. all complete. (Payment for Stone to be made separately). 75 mm thick back filling for pitching including 16.74 supplying of required materials and consolidation etc. complete with : 11 16.74.2 Stone aggregate 20 mm nominal size Sqm 2100 175.85 369285 MORADABAD DIVISION-ENGINEERING/NORTHERN RLY 16.75 Providing and laying C.C. pavement of mix M- cum 135 8277.55 1117469.25 25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush 12 etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately). 16.83 Taking out existing CC interlocking paver Sqm 600 108.65 65190 blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping 13 ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. 16.84 Laying old cement cocrete interlocking paver Sqm 450 362.3 163035 blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of 14 coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). 16.90 Providing and laying tactile tile (for vision Sqm 5 1719 8595 impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, 15 court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in- Charge. Total 5962616.60 Item- 15 All items of Sub Head-19 (Drainage) of DSR-2021 (Except banned item) S No. Item No Description of Item Unit Qty Rate Amount 19.0 DRAINAGE Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. 19.4 cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed 19.6 with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 1 19.6.2 150 mm dia. R.C.C. pipe Metre 90 493.1 44379 2 19.6.3 250 mm dia. R.C.C. pipe Metre 175 811.15 141951.25 3 19.6.4 300 mm dia. R.C.C. pipe Metre 480 902.05 432984 4 19.6.5 450 mm dia. R.C.C. pipe Metre 150 1481.55 222232.5 Total 841546.75 Item- 16 All items of Sub Head-23 (Rain Water Harvesting & TubewellS) of DSR-2021 (Except banned item) S No. Item No Description of Item Unit Qty Rate Amount 23.0 RAIN WATER HARVESTING & TUBEWELLS MORADABAD DIVISION-ENGINEERING/NORTHERN RLY Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore 23.1 log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. 23.1.2 Rocky strata including Boulders 1 23.1.2.1 300 mm dia Metre 270 1416.3 382401 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore 23.2 log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. 23.2.2 Rocky strata including Boulders 2 23.2.2.1 300 mm dia Metre 90 1561.7 140553 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required 23.3 dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 3 23.3.3 200 mm nominal size dia Metre 360 951.95 342702 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, 23.4 conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 4 23.4.3 200 mm nominal size dia Metre 55 1099.25 60458.75 23.5 Supplying, filling, spreading & leveling stone cum 85 1302.3 110695.5 boulders of size range 5 cm to 20 cm, in 5 recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 23.6 Supplying, filling, spreading & leveling gravels cum 60 1309 78540 of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in 6 required thickness, for all leads & lifts, all complete as per direction of Engineer-in- charge. 23.7 Supplying, filling, spreading & leveling coarse cum 60 1309 78540 sand of size range 1.5 mm to 2 mm in 7 recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. 23.8 Gravel packing in tubewell construction in cum 15 1479.25 22188.75 accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required 8 grading & sizes as per actual requirement, all complete as per direction of Engineer-in- charge. MORADABAD DIVISION-ENGINEERING/NORTHERN RLY Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top 23.13 of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 9 23.13.3 200 mm dia Each 3 280.95 842.85 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell 23.14 as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 10 23.14.3 200 mm clamp Each 6 1827 10962 Providing and fixing Bail plug/ Bottom plug of 23.15 required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 11 23.15.3 200 mm dia Each 3 308.55 925.65 Total 1228809.50 Item- 17 All items of Sub Head-26 (New Technologies and Materials) of DSR-2021 (Except banned item) S No. Item No Description of Item Unit Qty Rate Amount 26.0 NEW TECHNOLOGIES AND MATERIALS 26.41S NEW TECHNOLOGY ITEMS 26.65 Providing and fixing roofing consist of 0.8 mm Sqm 210 1630.4 342384 thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered 1 with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately). Total 342384.00
Item Breakup - B-USSOR - 2021 ITEMS
Ordinary Portland Cement 43 grade approved MT brands/makes
Pozzolana brands/makes Total 125913.35 Item- 2 All items of Sub Head-21 (Miscellaneous Items) of USSOR-2021 (Except banned item) S No. Item No Description of Item Unit Qty Rate Amount Hiring of machinery for minor miscellaneous works for short duration including operator/driver, fuel, lubricants and consumable. The contractor shall arrange all statutory permits as required by rules and regulations prevailing in the area of work. Payment shall be made for actual working hours at site.
JCB Backhoe Loaders 3DX Plus or similar with Hour minimum 1.10 cum bucket capacity Total 17173.80
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
STD-2022UPTOCS-11.pdf
ATTACHMENT
GCC-2022.pdf
ATTACHMENT
GCC-2022ACSUPTO11.pdf
ATTACHMENT
Download all tender documents and submit your bid