REPAIR REPLACEMENT OF OLD UNSERVICEABLE SUBMAIN WIRING POINT WIRING SWITCHES SOCKET OTHER INTERNAL WIRING REPAIR TO CEILING EXHAUST WALL MOUNTED FANS AT CABS STIR DARE PH II CEMILAC UNDER AGE E M R D EAST BANGALORE

Amount

M&L Point wiring complete with Multi stranded copper conductor size 1.5 sqmm PVC insulated, unsheathed,FRLS cable , 1100 volts grade conforming to IS 694 multistranded , drawn in and including rigid PVC surface /concealed type conduit / casing capping on walls/ floors/ ceiling etc with and including metal flush boxes of suitable size and modular white plate with frame for mounting of fittings, modular type switches, regulator and also including 1.5 sqmm PVC insulated unsheathed copper cable green in colour as continuous earth continuity conductor and connecting to earth dolly, cutting chasis to the walls/ floors/ ceiling and repairing with existing surface after work including taking down old unserviceable point wiring, complete all as specified and as directed.

One light/ fan/exhaust fan point controlled by one way switch

One light point controlled by 02 two way switches

One three pin socket outlet 6 amps socket on the same board with other switches

One 3 pin socket point 5 Amps on the independent board.

One bell point controlled by one bell push

All as per item No 1 here-in-before, but using copper conductor 2.5 sqmm PVC insulated unsheathed FRLS cable with copper conductor size 1.5 sqmm PVC insulated unsheathed continuous earth continuity for 3 pin 15 amps socket outlet independently all as specified and as directed by Engr-in-Charge.

Supply & fix switch modular type single pole 1 way 5 Amp 230 volt complete as directed.

Supply & fix switch modular type single pole 2 way 5 Amp 230 volt complete as directed.

Supply & fix socket 6 Amps modular type, 230 volts grade all as directed.

Supply & fix switch modular type 1 way 16A, 1 module all as specified and directed.

Supply & fix Socket Modular type 6A/16A 2-3pin combined 2 module 230 Volts grade all as directed.

Supply & fix Modular switch bell push 6 Amps one module all as specified and directed by Engr-in-Charge

Supply & fix modular type fan regulator 120 W two module complete all as specified and directed by Engr-in-Charge

Supply and fix bell AC 230V single phase all as specififed and directed by Engr-in-Charge

Supply & fix ceiling rose surface bakelite two to three terminal complete all as directed.

Supply & Fix angle holder polycarbonat/bakelite type with back plate complete all as specified and directed including one number LED lamp of 9Watts complete all as directed

Fixing only fluoresent tube light fittings LED 20/18 watts surface mounting/batten mounting with all required fitting and fixtures to ceiling rose with required twin copper conductor of size 0/0.24 complete all as specified and directed by Engineer -in- charge Note :- Tube light fittings LED 20/18 watts will issued under schedule - B - free for fixing only

Supply and replacement angle holder/tube light fitting with decorative LED mirror light fitting surface mounted of capacity of 07W translucent acrylic diffuser including driver and accessories complete all as specified. including connecting to ceiling rose with twin copper conductor of size 0/0.24 complete all as specified and directed Make : Crompton Cat Part No : LCL-07-CDL or equivalent in Havells/WIPRO/Phillips

Supply and replacement of any type of fitting with LED type surface mounted decorative oval bulk head fitting edge lit of 10Watts complete including connecting to ceiling rose with twin copper conductor of size 0/0.24 all as specified and directed Make : Havells Cat part No : RUGBYNEONFT10W LED760SSYMBOPC or equivalent in WIPRO/CG/Phillips

Dismantling the ceiling fan complete of any type and size , cleaning, servicing, greasing to bearings checking of nuts bolts , safety split pin, bushes , capacitor and complete testing all as directed Note :- Expendable stores like cotton waste/cleaning materials, grease, lubricants, machine screws, safety split pin, bots/nuts and transportation to and from site to work place are deemed to be included in rate quoted

Taking out and Dismantling all components of ceiling fan existing make 1200mm sweep, cutting and removing burnt out copper wining from the rotor assy and rewinding with super enamelled copper winding wire of suitable gauge and turns with necessary insulation materials , varnishing, reassembling , greasing to bearing , replacing bushes, replacment of capacitor and complete testing all as directed. Note:- (a) The spares like ball bearing, capacitor and GM bush required for repair the ceiling fan will be measured and paid separately under respective item. (b) Expendable stores like cotton waste /cleaning materials, grease, lubricants, machine screws, safety split pin, bolts, nuts and transportation to and fro from site to work place are deemed to be included in rate quoted.

All as per item No 17 herein before, but for 1400mm sweep ceiling fan

All as per item No 17 herein before but for 380mm sweep exhaust fan complete

All as per item No 17 herein before but for 450mm sweep exhaust fan complete

Supply and replace worn out fan bearings of the existing size of superior quality complete all as specified and directed

Supply and replace capacitor 2.5mfd suitable for 1200mm sweep ceiling fan complete all as specified and directed

Supply and replace capacitor 4.0mfd suitable for exhaust fan complete all as specified and directed

Supply and replace rubbr reel of superior quality along with gun metal frame and split pin complete all as specified

Supply and fix exhaust fan louvers on outside of the external wall suitable for 380mm sweep complete all as specified and as directed

Supply and fix exhaust fan louvers on outside of the external wall suitable for 450mm sweep complete all as specified and as directed

Painting of ceiling fan along with down rod and blades using spray gun with existing colour at the site including dismantling the fan from the hook complete all as specified and as directed

M & L for submain wiring of 2 run 4 Sqmm size PVC insulated unsheathed multistranded copper conductor 1100 Volts FRLS grade drawn through and including suitable size of PVC casing capping /conduit accessories concealed in wall/roof including one run of 2.5 Sqmm PVC insulated multistranded copper wire for earth , ISI marked and connecting up complete including removing old unserviceable cables all as specified and directed by Engr-in-Charge Note :-(i) One run of PVC conduit, two runs of copper cable and one run of earth wire shall be measured and paid as one unit

M & L for submain wiring of 2 run 6 Sqmm size PVC insulated unsheathed multistranded copper conductor 1100 Volts FRLS grade drawn through and including suitable size of PVC casing capping /conduit accessories concealed in wall/roof including one run of 4 Sqmm PVC insulated multistranded copper wire for earth , ISI marked and connecting up complete including removing old unserviceable cables all as specified and directed by Engr-in-Charge Note :-(i) One run of PVC conduit, two runs of copper cable and one run of earth wire shall be measured and paid as one unit

M & L for submain wiring of 4 run 10 Sqmm size PVC insulated unsheathed multistranded copper conductor 1100 Volts FRLS grade drawn through and including suitable size of PVC casing capping /conduit accessories concealed in wall/roof including two run of 6 Sqmm PVC insulated multistranded copper wire for earth , ISI marked and connecting up complete including removing old unserviceable cables all as specified and directed by Engr-in-Charge Note :-(i) One run of PVC conduit, four runs of copper cable and one run of earth wire shall be measured and paid as one unit

Supply and fix in replacement of MCB DB SPN 4 way DB double door type single phase 230 Volts complete including dismantling the old one all as specified and directed

Supply and fix in replacement of MCB DB SPN 6 way DB double door type single phase 230 Volts complete including dismantling the old one all as specified and directed

Supply and fix in replacement of MCB DB SPN 8 way DB double door type single phase 230 Volts complete including dismantling the old one all as specified and directed

Supply and fix in replacement of MCB SPN 6-32Amps 230 Volts single phase all as specified complete including dismantling the old one

Supply and fix in replacement of MCB SP 6-32Amps 230 Volts single phase all as specified complete including dismantling the old one

Supply and fix in replacement of MCB TP 63Amps 415 Volts three phase all as specified complete including dismantling the old one

Supply and fix in replacement of MCB TPN 6-32Amps 415 Volts three phase all as specified complete including dismantling the old one

Supply and fix in replacement of recess mounted LED fitting 2' x 2' soft light and glare free symmetrical illumination of 18 Watts complete all as specified and directed Make : Havells Cat Part No : VENUSNEOHE2X2PLR18WLED8XXS or equivalent in Bajaj/CG/Philips

All as per item No. 38 here-in- before, but of 24Watts Make : Havells Cat Part No : VENUSNEOHE2X2PLR24WLED8XXS or equivalent in Bajaj/CG/Philips

Supply and fix in replacement of surface mounted LED downlighter fitting with white powder coated aluminium housing with integrated electronic driver of illumination of 15 Watts complete all as specified and directed Make : Havells Cat Part No : ENDURANEOSURFACEDLS15WLED840S or equivalent in Bajaj/CG/Philips

Supply, install, testing and commissioning in replacement of CPRI approved LT Panel board, outdoor cubicle , dust and vermin proof made out of 3.15mm thick MS sheet with front end back door openable type fitted with nuts, bolts and washers fitted with knobs and hinges incl painting with two coats of enamelled paint over a coat of red oxide primer suitable for 415Volts 50Hz, 3 phase, 4 wire suitable for Pocket 1 and including the following :-

M&L Earthing complete with galvanised steel earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground( earth pit not less than 2.25metres deep below the normal ground level) with top edge of the plate not less than 1.5m below normal GL connected as required 32 x 6mm upto 7.5Mtr GI strip up to means of GI bolts, nuts , check nuts and washers and connected to building panel/DB including necessary excavation and earth work (in any of strata) providing charcoal dust, salt mixed with fine sand in continuous layers, PCC (1:3:6 ) type C1 in chember ,Precast 50 mm thick in cement ( 1: 2:4) type B.1 with CI frame with cover, 20mm dia bore light grade GI watering pipe furnel etc fixing of GI Pipe 40 mm bore protection for earthing strip from earth pit to test point complete & making connection all as specified in Electrical plate No 3 and as directed by Engineer-in-Charge.

M&L Painting of LT outdoor type feeder pillar box of size not more than 1.50 x 1.25 x 0.75m with two coats of enamelled paint over a coat of red oxide primer including repair to the hinges and locking system , cleaning inside the panel, cleaning the vegetation around the foundation upto 1.0 mtr around complete all as specified and as directed

Supply & fix MES sub station boards of size 4 x 2 feet with SS 50mm pipe support ground aprox 6 feet hight errected in earth with cement concrete, including excavation as required, with superior quality ACP boards with radium/reflective blue letters with maxium 70 letters with maxium size in English with stainless steel frame work complete all as specified by directed by Engineer - in - charge. Note :- Display letter for the boards will be ' name of installation' and "location" all as directed.

Providing services for maintenance and repair of internal electric supply and attending day to day complaint round the clock in all days in general shift in CABS ,STIR & CEMILAC area except sundays & Holidays all as directed/specified as under:- (a) Nature of duty:- (i) Attending of all day to day complaints of maintenance works. (ii) Replacing of fluoresent tubes bulbs bulding security lghts of any wattage any type choke starters,capacitors etc. (iii) Attending faults in 5/15 Amps socket,single phase/ Three phase power pont distrubution board fedder pillar boxes of all type etc including internal wiring of bulding lights/fans/geysrrs etc complete. (iv) periodical examation of feeder pillar boxes for any loose connection and tightening the same. (v) Inspection of Earth Pits (vi) Collection of Job card maintained by duty staff and attending the same without any loss of time. (vii) Any other job required but not stated in this schedule but essentail for smooth functioning of service centre. (viii) The materail required for attending the repaire will be provided by the department as & when required basis ( Except T&P shall be provided by the contractor (b) Operating staff to be employed as under:- (i) Electrican - 01 No for general shift excluding sunday Shift Timing :- 0900 to 1700hrs (general shift)

S & F in replacement of bollard fiting with LED energy saving , environmental friendly, long life aesthetically designed die cast aluminium landscape luminaire for download lighting with high power LED as light source of 8Watts with all accessories complete including pedestals and dismantling old one complete Make - Havells CAT No. BAMBOOBL8WLED757PSYMTOPC or equivalent in Crompton Greaves / Bajaj /Phillilps

Supply and lay in trenches or passing through pipes ,gutter under road 1100 volt grade heavy duty cable with XLPE insluated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanized steel or tape and over all PVC sheathed 10sqmm nominal cross sectional area 2 core complete all as directed Make : Polycab/Havells/Finolex

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in deep and getting out in soft/loose soil for laying GI Pipe and underground cable, foundation etc complete all as directed

Material and labour for fine and dry sand cushioning for under ground cable including providing with layers of sand 8cm deep before laying the cable and 15 cm deep after laying the cable & stretching the cable complete all as specified and as directed.

Supply and laying well burnt brick sub class B of size 230mm x 115mm x 75mm in size, laid in trenches for cable protection complete all as specified and as directed.

Removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils all as specified as directed.

HEERA CONSTRUCTION CO.

Prashanth Associates

ABHISHEK CONSTRUCTIONS

SREE BUILDERS

devan enterprises

SAI CONSTRUCTIONS

Siddivinayaka Constructions

J M Builders And Engineers

M/s. Rishav Sood