CONSTRUCTION OF WELFARE BUILDING ALONG WITH OTHER AMENITIES FOR SMS-II CCS AT BOKARO STEEL PLANT, BOKARO STEEL CITY, JHARKHAND

BILL OF QUANTITY

Name of the work :Cost Estimate for Welfare Building

S.H. No. Description of Sub-Head Amount (Rs) Including Amount (Rs) Including

1 Civil Finshing Works : 5,44,15,345 15,70,261

2 Electrical Works : 86,35,342 76,14,525

3 Plumbing Works : 12,30,147 18,15,648

4 Fire Fighting Works : 3,44,606 62,964

5 HVAC Works : 32,76,500

6 Roadwork 32,70,026

7 Conference furniture 6,18,114

8 Horticulture works 1,16,059

Grand Total 8,29,69,537

Grand Total 8,29,69,537

Digitally signed by PRIYA

ABSTRACT OF COST

Name of the work : Constrcution of Welfare Building for SAIL, Ranchi

Amount For DSR Amount for Non

S.H. No. Description of Sub-Head Items DSR Items

01. Earth Work : 1666286.00

02. Concrete Work : 1171732.00

03. Reinforced Cement Concrete : 24251850.00

04. Masonry Work : 5288323.00

06. Cladding Work : 840759.00

07. Wood and P.V.C. Work : 4480078.24

08. Steel Work : 842535.00

11. Finishing : 6478457.00

19. Aluminium Work : 1695788.00

20. Water Proofing : 1257332.00

Septic Tank 492528.36

Non Schedule Items : 1570261.00

2021 I.No. Description of Item Quantity Rate (Rs) Unit Amount(Rs)

Sub-Head : Earth Work

2.6 Earth work in excavation by mechanical means

(Hydraulic excavator) / manual means over areas

(exceeding 30cm in depth, 1.5m in width as well as 10

sqm on plan) including getting out and disposal of

excavated earth, lead up to 50m and lift up to 1.5m,as

directed by Engineer-in-Charge.

2.6.1 All kinds of soil 1941.00 One Cubic 307516.00

2.7 Earth work in excavation by mechanical means

(Hydraulic excavator) / manual means over areas

(exceeding 30 cm in depth, 1.5m in width as well as 10

sqm on plan) including getting out and disposal of

excavated earth, lead up to 50 m and lift up to 1.5m, as

directed by Engineer-in-Charge.

2.7.1 Ordinary rock 485.25 One Cubic 213068.00

2.25 Filling available excavated earth (excluding rock) in 1941.00 One Cubic 332489.00

trenches, plinth, sides of foundations etc. in layers not Metre

exceeding 20cm in depth, consolidating each deposited

layer by ramming and watering, lead up to 50 m and lift

2.25A Excavating, supplying and filling of local earth (including 330.00 One Cubic 197901.00

royalty) by mechanical transport up to a lead of 5 km, Metre

also including ramming and watering of the earth in

layers not exceeding 20 cm in trenches, plinth, sides of

foundation etc., complete. 599.70

2.26 Extra for every additional lift of 1.5 m or part thereof in

excavation /banking excavated or stacked materials.

2.26.1 All kinds of soil. 726.00 One Cubic 80669.00

2.26.2 Ordinary or hard rock. 181.50 One Cubic 36166.00

2021 I.No. Description of Item Quantity Rate (Rs) Unit Amount(Rs)

2.27 Supplying and filling in plinth with sand under floors, 107.25 One Cubic 246461.00

including watering, ramming, consolidating and dressing Metre

complete. 2298.00

2.34 Supplying chemical emulsion in sealed containers

including delivery as specified.

2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% 268.13 One Litre 57276.00

2.35 Diluting and injecting chemical emulsion for PRE -

CONSTRUCTIONAL anti- termite treatment (excluding

the cost of chemical emulsion) :

2.35.3 Treatment of soil under existing floors using chemical

emulsion @ one litre per hole, 300 mm apart including

drilling 12 mm diameter holes and plugging with cement

mortar 1 :2 (1 cement : 2 Coarse sand) to match the

existing floor :

2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% 715.00 One Square 194740.00

concentration. 272.36 Metre

Total of the Sub-Head - Earth Work : 1666286.00

Sub-Head : Concrete Work

4.1 Providing and laying in position cement concrete of

specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from 72.11 One Cubic 485043.00

natural sources : 8 graded stone aggregate 40 mm Metre

nominal size derived from natural sources). 6726.44

4.11 Providing and laying damp-proof course 50mm thick 16.25 One Square 7814.00

with cement concrete 1:2:4 (1 cement : 2 coarse sand Metre

(zone-III) derived from natural sources : 4 graded stone

aggregate 20mm nominal size derived from natural

sources). 480.88

4.12 Extra for providing and mixing water proofing material in 5.20 per bag of 50 83.00

cement concrete work in doses by weight of cement as kg cement

per manufacturer’s specification. used

4.13 Providing and applying a coat of residual petroleum 16.25 One Square 1967.00

bitumen of grade of VG-10 of approved quality using 1.7 Metre

kg per square metre on damp proof course after

cleaning the surface with brushes and finally with a

piece of cloth lightly soaked in kerosene oil. 121.06

4.17 Making plinth protection 50mm thick of cement 84.00 One Square 60883.00

concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) Metre

derived from natural sources : 6 graded stone aggregate

20 mm nominal size derived from natural sources) over

75mm thick bed of dry brick ballast 40 mm nominal size,

well rammed and consolidated and grouted with fine

sand, including necessary excavation leveling & dressing

& finishing the top smooth.

2021 I.No. Description of Item Quantity Rate (Rs) Unit Amount(Rs)

4.20 Providing and laying in position ready mixed or site

batched design mix cement concrete for plain cement

concrete work; using coarse aggregate and fine

aggregate derived from natural sources, Portland

Pozzolana/Ordinary Portland/Portland Slag cement,

admixtures in recommended proportions as per IS :

9103 to accelerate/ retard setting of concrete, to

improve durability and workability without impairing

strength; including pumping of concrete to site of laying,

curing, carriage for all leads; but excluding the cost of

centering, shuttering and finishing as per direction of

the Engineer-in-charge; for the following grades of

Note : Extra cement upto 10% of the minimum specified

cement content in design mix shall be payable

separately. In case the cement content in design mix is

more than 110% of the minimum specified cement

content, the contractor shall have discretion to either re-

design the mix or bear the cost of extra cement.

4.20.1 All works up to plinth level:

4.20.1.1 Concrete of M-10 grade with minimum cement content 72.11 One Cubic 615942.00

of 220 kg/cum. 8541.70 Metre

Total of the Sub-Head - Concrete Work : 1171732.00

Sub-Head : Reinforced Cement Concrete

5.3 Reinforced cement concrete work in beams, suspended 10.00 One Cubic 110492.00

floors, roofs having slope up to 15° landings, balconies, Metre

shelves, chajjas, lintels, bands, plain window sills,

staircases and spiral stair cases above plinth level up to

floor five level, excluding the cost of centering,

shuttering, finishing and reinforcement with 1:1.5:3 (1

cement : 1.5 coarse sand(zone-III)derived from natural

sources : 3 graded stone aggregate 20 mm nominal size

derived from natural sources).

5.9 Centering and shuttering including strutting, propping

etc. and removal of form for :

5.9.1 Foundations, footings, bases of columns, etc. for mass 367.50 One Square 129772.00

concrete 353.12 Metre

5.9.2 Walls (any thickness) including attached pilasters, 27.00 One Square 20154.00

butteresses, plinth and string courses etc. 746.44 Metre

5.9.4 Shelves (Cast in situ) 23.30 One Square 18995.00

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts 749.70 One Square 641113.00

5.9.7 Stairs, (excluding landings) except spiral-staircases 183.48 One Square 128314.00

5.9.20 Suspended floors, roofs, landings, balconies and access 1677.55 One Square 1522866.00

platform with water proof ply 12 mm thick 907.79 Metre

5.9.21 Lintels, beams, plinth beams, girders, bressumers and 1850.38 One Square 1376177.00

cantilevers with water proof ply 12 mm thick 743.73 Metre

5.22 Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in position and

binding all complete upto plinth level.

5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or 45244.13 One Kilogram 4312889.00

2021 I.No. Description of Item Quantity Rate (Rs) Unit Amount(Rs)

5.22A Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in position and

binding all complete above plinth level.

5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or 82000.00 One Kilogram 7816637.00

5.30 Add for plaster drip course/ groove in plastered surface 50.00 One Metre 3440.00

or moulding to R.C.C. projections 68.80

5.33 Providing and laying in position ready mixed or site

batched design mix cement concrete for reinforced

cement concrete work; using coarse aggregate and fine

aggregate derived from natural sources, Portland

Pozzolana/ Ordinary Portland/ Portland Slag cement,

admixtures in recommended proportions as per IS: 9103

to accelerate/ retard setting of concrete, to improve

durability and workability without impairing strength;

including pumping of concrete to site of laying, curing,

carriage for all leads; but excluding the cost of centering,

shuttering, finishing and reinforcement as per direction

of the engineer-in-charge; for the following grades of

Note: Extra cement up to 10% of the minimum specified

cement content in design mix shall be payable

separately. In case the cement content in design mix is

more than 110% of the specified minimum cement

content, the contractor shall have discretion to either re-

design the mix or bear the cost of extra cement

5.33.1 All works upto plinth level

5.33.1.1 Concrete of M25 grade with minimum cement content 270.00 One Cubic 2295953.00

of 330 kg /cum 8503.53 Metre

5.33.1.2 Concrete of M30 grade with minimum cement content 12.00 One Cubic 109724.00

of 350 kg /cum 9143.69 Metre

5.33.2 All works above plinth level upto floor V level

5.33.2.1 Concrete of M25 grade with minimum cement content 510.00 One Cubic 4861432.00

of 330 kg /cum 9532.22 Metre

5.33.2.2 Concrete of M30 grade with minimum cement content 65.00 One Cubic 629381.00

of 350 kg /cum 9682.78 Metre

5.35 Add for using extra cement in the items of design mix 375.00 One Quintal 274511.00

over and above the specified cement content therein.

Total of the Sub-Head - Reinforced Cement Concrete : 24251850.00

Sub-Head : Masonry Work

6.1 Brick work with common burnt clay F.P.S. (non modular)

bricks of class designation 7.5 in foundation and plinth

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 25.00 One Cubic 176993.00

4.4 Brick work with common burnt clay F.P.S. (non modular)

bricks of class designation 7.5 in superstructure above

plinth level up to floor V level in all shapes and sizes in :

4.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) 418.00 One Cubic 3783283.00

6.12 Half brick masonry with common burnt clay F.P.S. (non

modular) bricks of class designation 7.5 in foundations

and plinth in :

6.12.2 Cement mortar 1:4 (1 cement : 4 coarse sand) 10.00 One Square 8909.00

2021 I.No. Description of Item Quantity Rate (Rs) Unit Amount(Rs)

6.13 Half brick masonry with common burnt clay F.P.S. (non

modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) 1123.23 One Square 1215888.00

6.15 Extra for providing and placing in position 2 Nos 6mm 1123.23 One Square 103250.00

dia. M.S. bars at every third course of half brick Metre

masonry.ird course of half brick masonry. 91.92

Total of the Sub-Head - Masonry Work : 5288323.00

Sub-Head : Cladding Work

8.2 Providing and fixing 18 mm thick gang saw cut, mirror

polished, premoulded and prepolished, machine cut for

kitchen platforms, vanity counters, window sills, facias

and similar locations of required size, approved shade,

colour and texture laid over 20 mm thick base cement

mortar 1:4 (1 cement : 4 coarse sand), joints treated

with white cement, mixed with matching pigment,

epoxy touch ups, including rubbing, curing, moulding

and polishing to edges to give high gloss finish etc.

complete at all levels.

8.2.2 Granite stone slab colour black, Cherry/Ruby red

8.2.2.1 Area of slab upto 0.50 sqm 5.83 One Square 28988.00

8.2.2.2 Area of slab over 0.50 sqm 5.83 One Square 27415.00

8.2.3 Granite stone slab all colour and texture except black,

Cherry/ Ruby red

8.2.3.1 Area of slab upto 0.50 sqm 5.83 One Square 22026.00

8.2.3.2 Area of slab over 0.50 sqm 5.83 One Square 20453.00

8.3 Providing edge moulding to 18 mm thick marble stone

counters, Vanities etc., including machine polishing to

edge to give high gloss finish etc. complete as per design

approved by Engineer-in-Charge.

8.3.2 Granite work 38.84 445.36 One Metre 17298.00

8.4 Extra for fixing marble /granite stone, over and above 38.84 One Metre 19640.00

corresponding basic item, in facia and drops of width

upto 150 mm with epoxy resin based adhesive, including

cleaning etc. complete. 505.65

8.5 Extra for providing opening of required size & shape for 33.00 Each 28357.00

wash basin/kitchen sink in kitchen platform, vanity

counter and similar location in marble/ Granite/ stone

work, including necessary holes for pillar taps etc.

including moulding, rubbing and polishing of cut edges

etc. complete 859.31

8.31 Providing and fixing Ist quality ceramic glazed wall tiles 598.34 One Square 676582.00

conforming to IS: 15622 (thickness to be specified by the Metre

manufacturer), of approved make, in all colours, shades

except burgundy, bottle green, black of any size as

approved by Engineer-in-Charge, in skirting, risers of

steps and dados, over 12 mm thick bed of cement

mortar 1:3 (1 cement : 3 coarse sand) and jointing with

grey cement slurry @ 3.3kg per sqm, including pointing

in white cement mixed with pigment of matching shade

Total of the Sub-Head - Cladding Work : 840759.00

2021 I.No. Description of Item Quantity Rate (Rs) Unit Amount(Rs)

Sub-Head : Wood and P.V.C. Work

9.3 Providing wood work in frames of false ceiling, partitions

etc. sawn and fixed in position with necessary stainless

steel screws etc.

9.3.2 Kiln seasoned and chemically treated hollock wood. 5.11 One Cubic 349216.00

68404.43 Metre

9.21 Providing and fixing ISI marked flush door shutters

conforming to IS : 2202 (Part I) non-decorative type,

core of block board construction with frame of 1st class

hard wood and well matched commercial 3 ply

veneering with vertical grains or cross bands and face

veneers on both faces of shutters:

9.21.1 35 mm thick including ISI marked Stainless Steel butt 143.14 One Square 306790.00

hinges with necessary screws 2143.35 Metre

9.23 Extra for providing lipping with 2nd class teak wood 178.92 One Square 76365.00

battens 25 mm minimum depth on all edges of flush Metre

door shutters (over all area of door shutter to be

measured). 426.81

9.40 Providing and fixing wooden moulded beading to door

and window frames with iron screws, plugs and priming

coat on unexposed surface etc. complete :

9.40.1 2nd class teak wood

9.74 Providing and fixing bright finished brass tower bolts

(barrel type) with necessary screws etc. complete :

9.75 Providing and fixing bright finished brass door latch with

necessary screws etc. complete :

9.76 Providing and fixing bright finished brass 100 mm 82.00 Each 63113.00

mortice latch and lock with 6 levers and a pair of lever

handles of approved quality with necessary screws etc.

complete. 769.67

9.82 Providing and fixing bright finished brass hanging type 82.00 Each 9556.00

floor door stopper with necessary screws, etc. complete.

9.127 Providing & Fixing decorative high pressure laminated

sheet of plain / wood grain in gloss / matt / suede finish

with high density protective surface layer and reverse

side of adhesive bonding quality conforming to IS : 2046

Type S, including cost of adhesive of approved quality.

9.140 Providing and fixing plain lining with necessary

screws/nuts & bolts/nails including a coat of approved

primer on one face and fixed on wooden /steel frame

work, complete as per direction of Engineer-in-charge.

(Frame work shall be paid for separately)

9.140.1 12mm thick commercial ply conforming to IS : 1328 1277.02 One Square 1472732.24

BWR type. 1153.26 Metre

2021 I.No. Description of Item Quantity Rate (Rs) Unit Amount(Rs)

24.84 Providing and fixing factory made single extruded WPC

(Wood Polymer Composite) solid door/ window/

Ceosetory windows & other Frames/ Chowkhat

comprising of virgin PVC polymer of K value 58-60

(Suspension Grade), calcium carbonate and natural

fibers (wood powder/ rice husk/ wheat husk) and non

toxic additives (maximum toxicity index of 12 for 100

gms) fabricated with miter joints after applying PVC

solvent cement and screwed with full body threaded

star headed SS screws having minimum frame density of

750 kg/cum, screw withdrawal strength of 2200 N (Face)

& 1100 N (Edge), minimum compressive strength of 58

N/mm2, modulus of elasticity 900 N/mm2 and

resistance to spread of flame of Class A category with

property of being termite/ borer proof, water/ moisture

proof and fire retardant and fixed in position with M.S

hold fast/ lugs/ SS dash fasteners of required dia and

length complete as per direction of Engineer-In- Charge.

(M.S hold fast/ lugs or SS dash fasteners shall be paid for

separately). Note: For WPC solid door/ window frames,

minus 5mm tolerance in dimensions i.e depth and width

of profile shall be acceptable. Variationin profile

dimensions on plus side shall be acceptable but no extra

payment on this account shall be made.

Providing and fixing factory made single extruded WPC

(Wood Polymer Composite) solid plain flush door

shutter of required size comprising of virgin polymer of

K value 58-60 (Suspension Grade), calcium carbonate

and natural fibers (wood powder/ rice husk/wheat husk)

and non toxic additives (maximum toxicity index of 12

for 100 gms) having minimum density of 650 kg/cum

and screw withdrawal strength of 1800 N (Face) & 900 N

(Edge), minimum compressive strength 50 N/mm2,

modulus of elasticity 850 N/mm2 and resistance to

spread of flame of Class A category with property of

being termite/borer proof, water/moisture proof and

fire retardant and fixing with stainless steel butt hinges

of required size with necessary full body threaded star

headed counter sunk S.S screws, all as per direction of

Engineer-In Charge. (Note: stainless steel butt hinges

and necessary S.S screws shall be paid separately)

Total of the Sub-Head - Wood And P.V.C Work : 4480078.24

Sub-Head : Steel Work

2021 I.No. Description of Item Quantity Rate (Rs) Unit Amount(Rs)

8.14 Providing and fixing pressed steel door frames

conforming to IS: 4351, manufactured from commercial

mild steel sheet of 1.60 mm thickness, including hinges,

jamb, lock jamb, bead and if required angle threshold of

mild steel angle of section 50x25 mm, or base ties of

1.60 mm, pressed mild steel welded or rigidly fixed

together by mechanical means, including M.S. pressed

butt hinges 2.5 mm thick with mortar guards, lock strike-

plate and shock absorbers as specified and applying a

coat of approved steel primer after pre-treatment of the

surface as directed by Engineer-in-charge:

8.14.1.2 Fixing with carbon steel galvanised dash fastener of

required dia and size (to be paid for separately).

8.14.2 Profile C

8.14.2.1 Fixing with adjustable lugs with split end tail to each 344.00 RMT 172372.00

10.25 Steel work welded in built up sections/ framed work,

including cutting, hoisting, fixing in position and applying

a priming coat of approved steel primer using structural

steel etc. as required.

10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, 100.00 One Kilogram 15131.00

gates and similar works. 151.31

10.27 Providing and fixing carbon steel galvanised (minimum

coating 5 micron) dash fastener of 10 mm dia double

threaded 6.8 grade (yield strength 480 N/mm2), counter

sunk head, comprising of 10 mm dia polyamide PA 6

grade sleeve, including drilling of hole in frame ,

concrete/ masonry, etc. as per direction of Engineer-in-

10.28 Providing and fixing stainless steel ( Grade 304) railing 756.00 One Kilogram 492160.00

made of Hollow tubes, channels, plates etc., including

welding, grinding, buffing, polishing and making

curvature (wherever required) and fitting the same with

necessary stainless steel nuts and bolts complete, i/c

fixing the railing with necessary accessories & stainless

steel dash fasteners , stainless steel bolts etc., of

required size, on the top of the floor or the side of waist

slab with suitable arrangement as per approval of

Engineer-in charge, (for payment purpose only weight of

stainless steel members shall be considered excluding

fixing accessories such as nuts, bolts, fasteners etc.).

Total of the Sub-Head - Steel Work : 842535.00

Sub-Head : Flooring

11.24 Extra for pre finished nosing to treads of steps of marble 216.00 One Metre 136265.00

/ granite stone. 630.86

11.25 Extra for marble / granite stone flooring in treads of 97.20 One Square 72502.00

steps and risers using single length up to 2.00 metre . 745.90 Metre

11.26 Kota stone slab flooring over 20 mm (average) thick base

laid over and jointed with grey cement slurry mixed with

pigment to match the shade of the slab including

rubbing and polishing complete with base of cement

mortar 1 : 4 (1 cement : 4 coarse sand) :

11.26.1 25 mm thick. 78.99 One Square 143345.00

2021 I.No. Description of Item Quantity Rate (Rs) Unit Amount(Rs)

11.27 Kota stone slabs 20 mm thick in risers of steps, skirting,

dado and pillars laid on 12 mm (average) thick cement

mortar 1:3 (1 cement 3 coarse sand) and jointed with

grey cement slurry mixed with pigment to match the

shade of the slabs, including rubbing and polishing

11.41A Providing and laying Vitrified tiles in floor in different

sizes (thickness to be specified by the manufacturer)

with water absorption less than 0.08% and conforming

to IS:15622, of approved brand & manufacturer, in all

colours and shade, laid on 20 mm thick cement mortar

1:4 (1 cement: 4 coarse sand) jointing with grey cement

slurry @3.3 kg/sqm including grouting the joints with

white cement and matching pigments etc. The tiles must

be cut with the zero chipping diamond cutter only .

Laying of tiles will be done with the notch trowel, plier,

wedge, clips of required thickness, leveling system and

rubber mallet for placing the tiles gently and easily.

11.41A.1 Double charge vitrified tile polished finish of size

11.41A.1.1 Size of Tile 600 x 600 mm 1205.92 One Square 1649746.00

11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size

11.41A.3.1 Size of Tile 600 x 600 mm 167.40 One Square 233360.00

11.46 Providing and laying Vitrified tiles in different sizes

(thickness to be specified by manufacturer) with water

absorption less than 0.08 % and conforming to I.S.

15622, of approved make in all colours & shade in

skirting, riser of steps, over 12 mm thick bed of cement

mortar 1:3 (1cement: 3 coarse sand), jointing with grey

cement slurry @ 3.3kg/sqm including grouting the joint

with white cement & matching pigments etc. complete.

11.46.2 Size of Tile 600x600 mm 274.66 One Square 428291.00

11.55 Providing and laying flamed finish Granite stone flooring

in required design and patterns, in linear as well as

curvilinear portions of the building all complete as per

the architectural drawings with 18 mm thick stone slab

over 20 mm (average) thick base of cement mortar 1:4

(1 cement : 4 coarse sand) laid and jointed with cement

slurry and pointing with white cement slurry admixed

with pigment of matching shade including rubbing,

curing and polishing etc. all complete as specified and as

directed by the Engineer-in-Charge :

11.55.1 Flamed finish granite stone slab Jet Black, Cherry Red, 345.54 One Square 951554.00

Elite Brown, Cat Eye or equivalent. 2753.84 Metre

2021 I.No. Description of Item Quantity Rate (Rs) Unit Amount(Rs)

11.56 Providing and laying Polished Granite stone flooring in

required design and patterns, in linear as well as

curvilinear portions of the building all complete as per

the architectural drawings with 18 mm thick stone slab

over 20 mm (average) thick base of cement mortar 1:4

(1 cement : 4 coarse sand) laid and jointed with cement

slurry and pointing with white cement slurry admixed

with pigment of matching shade including rubbing ,

curing and polishing etc. all complete as specified and as

directed by the Engineer-in-Charge.

11.56.1 Polished Granite stone slab jet Black, Cherry Red, Elite 68.81 One Square 258007.00

Brown, Cat Eye or equivalent 3749.83 Metre

11.56.2 Polished Granite stone slab of all colour and texture 68.81 One Square 195916.00

except Black, Cherry/Ruby Red 2847.41 Metre

Total of the Sub-Head - Flooring : 4103231.00

Sub-Head : Roofing

12.21 Providing gola 75x75 mm in cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 stone aggregate 10 mm and

down gauge), including finishing with cement mortar 1:3

(1 cement : 3 fine sand) as per standard design :

12.21.1 In 75x75 mm deep chase 112.00 One Running 30987.00

12.22 Making khurras 45x45 cm with average minimum 12.00 Each 3402.00

thickness of5 cm cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate of 20 mm

nominal size) over P.V.C. sheet 1 m x1 m x 400 micron,

finished with 12 mm cement plaster 1:3 (1 cement : 3

coarse sand) and a coat of neat cement, rounding the

edges and making and finishing the outlet complete.

12.45 Providing and fixing false ceiling at all height including

providing and fixing of frame work made of special

sections, power pressed from M.S. sheets and

galvanized with zinc coating of 120 gms/sqm (both side

inclusive) as per IS : 277 and consisting of angle cleats of

size 25 mm wide x 1.6 mm thick with flanges of 27 mm

and 37 mm, at 1200 mm centre to centre, one flange

fixed to the ceiling with dash fastener 12.5 mm dia x 50

mm long with 6 mm dia bolts, other flange of cleat fixed

to the angle hangers of 25x10x0.50 mm of required

length with nuts & bolts of required size and other end

of angle hanger fixed with intermediate G.I. channels

45x15x0.9 mm running at the spacing of 1200 mm

centre to centre, to which the ceiling section 0.5 mm

thick bottom wedge of 80 mm with tapered flanges of

26 mm each having lips of 10.5 mm, at 450 mm centre

2021 I.No. Description of Item Quantity Rate (Rs) Unit Amount(Rs)

shall be fixed in a direction perpendicular to G.I.

intermediate channel with connecting clips made out of

2.64 mm dia x 230 mm long G.I. wire at every junction,

including fixing perimeter channels 0.5 mm thick 27 mm

high having flanges of 20 mm and 30 mm long, the

perimeter of ceiling fixed to wall/partition with the help

of rawl plugs at 450 mm centre, with 25mm long dry

wall screws @ 230 mm interval, including fixing of

gypsum board to ceiling section and perimeter channel

with the help of dry wall screws of size 3.5 x 25 mm at

230 mm c/c, including jointing and finishing to a flush

finish of tapered and square edges of the board with

recommended jointing compound , jointing tapes ,

finishing with jointing compound in 3 layers covering

upto 150 mm on both sides of joint and two coats of

primer suitable for board, all as per manufacturer's

specification and also including the cost of making

openings for light fittings, grills, diffusers, cutouts made

with frame of perimeter channels suitably fixed, all

complete as per drawings, specification and direction of

the Engineer in Charge but excluding the cost of painting

12.45.2 12.5 mm thick tapered edge Glass Reinforced Gypsum 1324.72 One Square 1812056.00

(GRG) board conforming to IS: 2095- (Part 3) : 1996 Metre

(Board with BIS certification marks) 1367.88

Total of the Sub-Head - Roofing : 1846445.00

Sub-Head : Finishing

13.1 12 mm cement plaster of mix :

13.1.2 1:6 (1 cement: 6 fine sand) 1662.56 One Square 498518.00

13.2 15 mm cement plaster on the rough side of single or half

brick wall of mix :

13.2.2 1:6 (1 cement: 6 fine sand) 2741.77 One Square 945441.00

13.11 18 mm cement plaster in two coats under layer 12 mm 1079.22 One Square 508070.00

thick cement plaster 1:5 (1 cement: 5 coarse sand) Metre

finished with a top layer 6mm thick cement plaster 1:6

(1 cement: 6 fine sand). 470.78

13.16 6 mm cement plaster of mix :

13.16.1 1:3 (1 cement: 3 fine sand) 3527.93 One Square 949254.00

13.22 Extra for plastering exterior walls of height more than 10 99.93 One Square 7735.00

m from ground level for every additional height of 3 m Metre

or part thereof. 77.41

13.26 Providing and applying plaster of paris putty of 2 mm 9011.48 One Square 2053403.00

thickness over plastered surface to prepare the surface Metre

even and smooth complete. 227.87

13.50 Finishing walls with Premium Acrylic Smooth exterior

paint with Silicone additives of required shade

13.50.2 New work (Two or more coats applied @ 1.43 ltr/10 1079.22 One Square 164040.00

sqm over and including priming coat of exterior primer Metre

applied @ 0.90 litre/10 sqm) 152.00

13.61 Painting with synthetic enamel paint of approved brand

and manufacture to give an even shade :

13.61.1 Two or more coats on new work. 300.00 One Square 41931.00

2021 I.No. Description of Item Quantity Rate (Rs) Unit Amount(Rs)

13.83 Wall painting with premium acrylic emulsion paint of

interior grade, having VOC (Volatile Organic Compound )

content less than 50 grams/ litre. of approved brand and

manufacture, including applying additional coats

wherever required to achieve even shade and colour.

13.83.2 Two coats. 10336.20 One Square 1310065.00

Total of the Sub-Head - Finishing : 6478457.00

Sub-Head : Aluminium Work

21.1 Providing and fixing aluminium work for doors,

windows, ventilators and partitions with extruded built

up standard tubular sections/appropriate Z sections and

other sections of approved make conforming to IS: 733

and IS: 1285, fixing with dash fasteners of required dia

and size, including necessary filling up the gaps at

junctions, i.e. at top, bottom and sides with required

EPDM rubber/neoprene gasket etc. Aluminium sections

shall be smooth, rust free, straight, mitred and jointed

mechanically wherever required including cleat angle,

Aluminium snap beading for glazing / paneling, C.P.

brass/ stainless steel screws, all complete as per

architectural drawings and the directions of Engineer-in-

charge. (Glazing, paneling and dash fasteners to be paid

for separately) :

21.1.1 For fixed portion

21.1.1.2 Powder coated aluminium (minimum thickness of 20.00 One Kilogram 9916.00

powder coating 50 micron) 495.82

21.1.2 For shutters of doors, windows & ventilators including

providing and fixing hinges/ pivots and making provision

for fixing of fittings wherever required including the cost

of EPDM rubber / neoprene gasket required (Fittings

shall be paid for separately).

21.1.2.2 Powder coated aluminium (minimum thickness of 20.00 One Kilogram 11772.00

powder coating 50 micron) 588.59

21.3 Providing and fixing glazing in aluminium door, window,

ventilator shutters and partitions etc. with EPDM rubber

/ neoprene gasket etc. complete as per the architectural

drawings and the directions of engineer-in-charge . (Cost

of aluminium snap beading shall be paid in basic item):

Based on 21.3.3

With 6 mm thick reflective high performance glass 127.20 One Square 281795.00

(shade and other propoerties should be approved from Metre

Engineer in charge) 2215.37

21.8 Filling the gap in between aluminium frame & adjacent

RCC/ Brick/ Stone work by providing weather silicon

sealant over backer rod of approved quality as per

architectural drawings and direction of Engineer-in-

charge complete.

21.8.1 Upto 5mm depth and 5 mm width 328.60 One Running 29786.00

2021 I.No. Description of Item Quantity Rate (Rs) Unit Amount(Rs)

21.15 Providing and fixing aluminium casement windows

fastener of required length for aluminium windows with

necessary screws etc. complete.

21.15.2 Powder coated minimum thickness 50 micron 102.00 Each 8649.00

aluminium. 84.80

Providing and fixing factory made uPVC glazed/wire

mesh windows/doors comprising of lead free uPVC multi-

chambered frame, sash and mullion/coupler (where

ever required) extruded profiles having minimum wall

thickness of 1.70 mm for Series R1 and R2 profiles and

2.10 mm for Series R3 and R4 profiles conforming to EN:

12608 in any shape, colour and design duly reinforced

with galvanized mild steel section made of required

shape & size as per CPWD Specification, uPVC extruded

glazing beads, interlocks and Inline sash adaptor (where

ever required) of appropriate dimension, EPDM gasket,

hardware, SS 304 grade fasteners of minimum 8 mm dia

with countersunk head, comprising of matching

polyamide PA6 grade sleeve for fixing frame to finished

wall as per IS 1367 : Part 1 to 14, plastic packers, plastic

caps and necessary stainless steel screws etc Profile of

frame, sash & mullion (if required) shall be mitred cut

and fusion welded/mechanically jointed duly sealed at

all corners, including drilling of holes for fixing hardware

and drainage of water etc.

After fixing frame the gap between frame and adjacent

finished wall shall be filled with weather proof silicon

sealant over backer rod pf approved size and quality, all

complete as per per approved drawing conforming to

CPWD specification & direction of Engineer-in-Charge.

Section of steel reinforcement and cross sections of

uPVC profiles to be as per design approved by Engineer-

in-Charge. Wire mesh / Glazing of plain/ toughened/

laminated/ double glass unit with / without high

performance coatings as per design requirements and

conforming to IS: 3548 & IS:16231 shall be paid

Note:- Structural design proof checked from a

Government Engineering Institute, to be provided by the

manufacturer for:

(i) Sites with basic wind speed > 45 m/sec as per IS 875 -

(ii) Sites with structure height more than 20m for all

Casement window double panels with French (False)

Mullion with S.S 304 friction hinges as per size and

weight of sash, multi-point locking system, zinc alloy

(zamak) powder coated handles.

2021 I.No. Description of Item Quantity Rate (Rs) Unit Amount(Rs)

9.147.E3.2 Using R3 series with frame (55mm & above ) x (45mm & 127.20 SQM 1353870.00

above) & sash (55mm & above) x (65mm & above) &

French (False) mullion (55mm & above) x (60mm &

above), (Height upto 1.8 meter).

Total of the Sub-Head - Aluminium Work : 1695788.00

Sub-Head : Water Proofing

22.3 Providing and laying water proofing treatment to

vertical and horizontal surfaces of depressed portions of

W.C., kitchen and the like consisting of:

(i) Ist course of applying cement slurry @ 4.4 kg/sqm

mixed with water proofing compound conforming to IS

2645 in recommended proportions including rounding

off junction of vertical and horizontal surface.

(ii) IInd course of 20 mm cement plaster 1:3 (1 cement :

3 coarse sand) mixed with water proofing compound in

recommended proportion including rounding off

junction of vertical and horizontal surface.

(iii) IIIrd course of applying blown or residual bitumen

applied hot at 1.7 kg. per sqm of area.

(iv) IVth course of 400 micron thick PVC sheet. (Overlaps 150.00 One Square 106710.00

at joints of PVC sheet should be 100 mm wide and Metre

pasted to each other with bitumen @ 1.7 kg/sqm).

22.7 Providing and laying integral cement based water

proofing treatment including preparation of surface as

required for treatment of roofs, balconies, terraces etc

consisting of following operations:

(a) Applying a slurry coat of neat cement using 2.75

kg/sqm of cement admixed with water proofing

compound conforming to IS. 2645 and approved by

Engineer-in-charge over the RCC slab including adjoining

walls upto 300 mm height including cleaning the surface

before treatment.

(b) Laying brick bats with mortar using broken

bricks/brick bats 25 mm to 115 mm size with 50% of

cement mortar 1:5 (1 cement : 5 coarse sand) admixed

with water proofing compound conforming to IS : 2645

and approved by Engineer-in-charge over 20 mm thick

layer of cement mortar of mix 1:5 (1 cement :5 coarse

sand ) admixed with water proofing compound

conforming to IS : 2645 and approved by Engineer-in-

charge to required slope and treating similarly the

adjoining walls upto 300 mm height including rounding

of junctions of walls and slabs.

(c) After two days of proper curing applying a second

coat of cement slurry using 2.75 kg/ sqm of cement

admixed with water proofing compound conforming to

IS : 2645 and approved by Engineer in- charge.

2021 I.No. Description of Item Quantity Rate (Rs) Unit Amount(Rs)

(d) Finishing the surface with 20 mm thick joint less

cement mortar of mix 1:4 (1 cement :4 coarse sand)

admixed with water proofing compound conforming to

IS : 2645 and approved by Engineer in- charge including

laying glass fiber cloth of approved quality in top layer of

plaster and finally finishing the surface with trowel with

neat cement slurry and making pattern of 300x300 mm

square 3 mm deep.

(e) The whole terrace so finished shall be flooded with

water for a minimum period of two weeks for curing and

for final test.“All above operations to be done in order

and as directed and specified by the Engineer-in-Charge

22.7.1 With average thickness of 120 mm and minimum 720.00 One Square 1150622.00

thickness at khurra as 65 mm. 1598.09 Metre

Total of the Sub-Head - Water Proofing : 1257332.00

15 Sub-Head : Non Schedule Items

MR Providing & fixing Vista DS Opaque 3ply PVC+1 Ply fiber

glass blackout fabric series or equivalent in 100mm

vertical blinds having Head Rail: Head rail is of 25mm

high and 47 mm wide Extruded High strength aluminum

alloy section with Average wall thickness of minimum

0.9mm. The section is anodized for smooth operations

and has the provision of Fabric valance matching with

louvers fabric. End Control Unit (Reduction Gear Box):

End control unit state of art reduction gear box having

the reduction ratio of 3.5:1 for a very smooth operation

of the blind. This unit Consists of a planetary gear in the

outer housing, four small transmission gears fitted in the

middle assembly and an end receiving gear attached to

central sprocket unit. Tilt Rod: It is made of extruded

aluminum having three keyways. The tilt rod is fixed in

the end control unit and drives the carrier gear

mechanism to rotate the louvers. The average diameter

is 5.8mm to achieve minimum torsion deflection Tilter

Chain: This is made of 4.5 mm plastic beads molded on

1.5 mm thick polyester cord. The Pitch of the beads is

6mm. The chain drives the procket fixed in the end

control unit to rotate the louvers by 180 degrees.

2021 I.No. Description of Item Quantity Rate (Rs) Unit Amount(Rs)

The pitch of the chain corresponds to the sprocket in

perfect match for trouble free Operation. It is provided

in white color. Carrier (Runner): This is a molded

component having anti friction additive. It consists of

polymer Housing with wheels mounted on sides and has

a gear and worm mechanism with vertical worm fixed

With a tongued poly carbonate stem to hold the louvers.

The worm and gear mechanism are driven by Tilt rod

fixed to end control unit to rotate louvers by 180

degrees. The mounted wheels on sides of Casing move

on rails of head rail section for resistance free stacking

of louvers Spacer: This is made of molded High Polymer

ABS, having anti friction additive. It maintains proper

Spacing of the runners and ensures overlapping of

louvers for perfect light control. It is available in 100 mm

size. Installation Bracket: This is made of galvanized steel

“L” bracket of thickness 3mm which is fitted with

Pressure clip made of spring steel to hold the head-rail.

Cord Weight: This is made of ABS material hollow casing

with a steel weight inside.

Cord: It is 2.2mm in diameter, Nylon braided high 130.00 One Square 548860.00

strength cord having maximum abrasion resistance & Metre

Minimum elongation. Bottom Mechanism (Weight and

Chain): The purpose of this is to keep the louver straight

& prevent them from swaying.

bottom weight is made of FILLED PP and is having

provision for fixing bottom chain. Available in 100 mm.

weight is fixed with U- type of clips attached

at equal distance on Polyester cord having 0.8mm dia

with molded plastic beads on it.

MR Providing and fixing machine cut, mirror/ eggshell

polished, Granite stone work for wall lining (veneer

work), including dado, skirting risers of steps etc. in

required design and pattern wherever required stone of

different finished surface texture, on 12mm average

thick cement mortar 1:3 (1 cement : 3 coarse sand) laid

and joined with white cement slurry @ 3.3kg/sqm

including pointing with white cement slurry admixed

with pigment of matching shade, including rubbing

curing, polishing etc. All complete as per Architectural

designs and as direction by Engineer-in-charge.

Area of slab over 0.50 sqm

18mm thick Granite of all colour except black, 65.00 One Square 462875.00

cherry/ruby red 7121.15 Metre

18mm thick Granite of colour black, cherry/ruby red 65.00 One Square 558526.00

Total of the 1570261.00

NAME OF WORK :- CONSTRUCTION OF WELFARE BUILDING

ANALYSIS OF RATE FOR SEPTIC TANK (100 USER'S)

Sl. Description of Item Unit QTY Rate Amount

1 Excavation work by mechanical means (Hydraulic

excavator)/ manual means in foundation trenches or

drains (not exceeding 1.5m in width or 10 sqm on plan),

including dressing of sides and ramming of bottoms, lift

upto 1.5 m, including getting out the excavated soil and

disposal of surplus excavated soils as directed, within a

2 Excavation work by mechanical means (Hydraulic -

excavator)/ manual means in foundation trenches or

drains (not exceeding 1.5m in width or 10 sqm on plan),

including dressing of sides and ramming of bottoms, lift

upto 1.5 m, including getting out the excavated soil and

disposal of surplus excavated soils as directed, within a

3 2.25 Filling available excavated earth (excluding rock) in Cum 59.591 171.30 10,207.80

trenches, plinth, sides of foundations etc. in layers not

exceeding 20cm in depth, consolidating each deposited

layer by ramming and watering, lead up to 50 m and lift

4 Providing and laying in position cement concrete of -

specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

4.1.10 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded 2.190 6433.66 14,089.71

stone aggregate 40 mm nominal size).

5 Providing and laying in position machine batched and -

machine mixed design mix M-25 grade cement

concrete for reinforced cement concrete work, using

cement content as per approved design mix, including

pumping of concrete to site of laying but excluding the

cost of centering, shuttering, finishing and

reinforcement, including admixtures in recommended

proportions as per IS: 9103 to accelerate, retard setting

of concrete, improve workability without impairing

strength and durability as per direction of Engineer-in-

charge.“(Note :- Cement content considered in this item

is @ 330 kg/cum.“Excess/ less cement used as per

design mix is payable/recoverable separately).

5.33.1 Upto plinth level -

5.33.1.2 Concrete of M30 grade with minimum cement content Cum 15.720 9383.99 1,47,516.40

6 Centering and shuttering including strutting, propping -

etc. and removal of form for:

5.9.1 Foundations, footings, bases of columns, etc. for mass 94.590 353.12 33,401.80

7 5.9.5 Lintels, beams, plinth beams, girders, bressumers and Sqm 5.420 646.86 3,505.97

8 5.9.3 Suspended floors, roofs, landings, balconies and Sqm 11.970 815.07 9,756.42

access platform.

9 5.9.16 Edges of slabs and breaks in floors and walls. -

10 5.22 Reinforcement for R.C.C. work including straightening, -

cutting, bending, placing in position and binding all

5.22.6 Thermo-Mechanically Treated bars. -

Digitally signed by PRIYA

Sl. Description of Item Unit QTY Rate Amount

11 11.4 52 mm thick cement concrete flooring with concrete -

hardener topping under layer 50 mm thick cement

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregate 20mm nominal size) and top layer

12mm thick cement hardener consisting of mix 1:2 (1

cement hardener mix : 2 graded stone aggregate 6mm

nominal size) by volume. Hardening compound is

mixed @ 2 litre per 50kg of cement or as per

manufactures specifications. This includes cost of

cement slurry, but excluding the cost of nosing of steps

for maintaining slope Sqm 11.970 910.08 10,893.64

12 13.16 6 mm cement plaster on rough side of single or half -

brick wall of mix:

13 Providing and fixing in position pre-cast R.C.C. -

manhole cover and frame of required shape and

approved quality

19.19.3.1 Circular shape 560 mm internal diameter Nos 2.000 1588.78 3,177.57

14 19.16 Providing orange colour safety foot rest of minimum 6 Nos 12.000 498.69 5,984.25

mm thick plastic encapsulated as per IS : 10910 on

12mm dia steel bar conforming to IS : 1786 having

minimum cross section as 23 mmx25mm and over all

minimum length 263 mm and width as 165mm with

minimum 112 mm space between protruded legs

having 2 mm tread on top surface by ribbing or

chequering besides necessary and adequate anchoring

projections on tail length on 138 mm as per standard

drawing and suitable to with stand the bend test and

chemical resistance test as per specifications and

having manufacture’s permanent identification mark to

be visible even after fixing, including fixing in manholes

with 30x20x15 cm cement concrete block 1:3:6 (1

cement : 3 coarse sand : 6 graded stone aggregate 20

mm nominal size) complete as per design.

15 17.35 Providing and fixing soil, waste and vent pipes -

17.35.1.2 Centrifugally cast (spun) iron socketed pipe as per IS: Mtr 5.400 1145.60 6,186.24

16 Providing and fixing terminal guard : -

17.56.1.2 Sand cast iron S&S as per IS - 3989 Nos 1.000 467.59 467.59

17 19.32.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45 Nos 2.000 27916.73 55,833.46

x 45 cm dry brick honey comb shaft with bricks of class

designation 75 and S.W. drain pipe 100 mm diameter,

1.8m long complete as per standard design.With F.P.S.

Total Cost 4,92,528.36

Digitally signed by PRIYA

(SCHEDULE OF QUANTITIES)

NAME OF WORK: Estimate For Providing Electrical Works For Welfare Building at Bokaro Steel Plant

BokaroSteel City Jharkhand

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

A SCHEDULE ITEMS

WIRING AND SUB MAINS

Wiring for light point/ fan point/ exhaust fan point/ call

bell point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable in surface / recessed heavy

1 1.3.3 class Steel conduit, with modular switch, modular plate, Point 439 861225.15

suitable GI box and earthing the point with 1.5 sq.mm.

FRLS PVC insulated copper conductor single core cable

etc as required.a) Group C

Wiring for twin control light point with 1.5 sq.mm FRLS

PVC insulated copper conductor single core cable in

surface / recessed Steel conduit, 2 way modular switch,

modular plate, suitable GI box and earthing the point

with 1.5 sq.mm. FRLS PVC insulated copper conductor

single core cable etc as required 1951.16

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC

insulated copper conductor single core cable in surface/

3 1.5 recessed Steel conduit alongwith 1 No 4 sq. mm FRLS Point 1740 801111.49

PVC insulated copper conductor single core cable for

loop earthing as required 460.41

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC

insulated copper conductor single core cable in surface/

4 1.6 recessed Steel conduit alongwith 2 Nos 4 sq. mm FRLS metre 10 7039.05

PVC insulated copper conductor single core cable for

loop earthing as required. 703.90

Wiring for circuit/ submain wiring alongwith earth wire

with the following sizes of FRLS PVC insulated copper

conductor, single core cable in surface/ recessed Steel

conduit as required. 0.00

b 1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire metre 1000 455.09 455092.40

b 1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire metre 1040 626.28 651335.05

d 1.7.5 2 X 10 sq. mm + 1 X 6 sq. mm earth wire metre 5 754.94 3774.72

e 1.7.9 4 X 6 sq. mm + 2 X 6 sq. mm earth wire metre 120 982.49 117898.70

f 1.7.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire metre 60 1239.81 74388.47

g 1.7.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire metre 50 1749.13 87456.43

Supplying and fixing suitable size GI box with modular

plate and cover in front on surface or in recess, including

providing and fixing 3 pin 5/6 amps modular socket

outlet and 5/6 amps modular switch, connection etc. as

required. (For light plugs to be used in non residential

buildings). 507.19

Supplying and fixing suitable size GI box with modular

plate and cover in front on surface or in recess, including

7 1.32 providing and fixing 6 pin 15/16 amps modular socket Each 32 19939.00

outlet and 15/16 amps modular switch, connection etc.

as required. 623.09

Supplying and fixing of following modular switch/ socket

outlet on the existing Modular plate & switch including

connection but excluding modular plate etc. as required.

b 1.24.4 3 pin 5/6 amp socket outlet Each 112 129.72 14528.93

d 1.24.5 6 pin 15/16 amp socket outlet Each 1 209.47 209.47

e 25 amp switch Each 1 212.66 212.66

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

Supplying and fixing following size/ modules, GI box

Boxes alongwith modular base & cover plate for modular

switches in recess etc as required.

10 2.18 Supplying and fixing 20 amps, 240 volts, SPN

industrial type, socket outlet, with 2 pole and earth,

metal enclosed plug top along with 20 amps "C"

curve, SP, MCB, in sheet steel enclosure, on surface Each 1 1723.61

or in recess, with chained metal cover for the socket out

let and complete with connections, testing and

commissioning etc. as required. 1723.61

11 1.25 Supplying and fixing stepped fan regulator on the

existing modular plate switch box including connections

but excluding modular plate etc. as required.

12 Supplying and fixing of 16 SWG M.S. Fan Box 12.5"

Rod but without fan cover (hylam sheet). as required. 212.66

13 Supplying and fixing of fan cover (hylam sheet).on the

existing Fan Box as required. 79.75

14 Supplying and fixing of modular Blanking plate on the

1.26 existing modular plate & switch box excluding modular Each 70 2977.24

plate etc. as reqd. 42.53

TELEPHONE / TV 0.00

15 1.24 Supply and fixing following modular switch/socket on the

existing modular plate and cover plate & switch box

including connections but excluding modular plate etc.

as required. 0.00

a 1.24.6 Telephone socket outlet. (RJ - 11) Each 49 157.37 7711.05

b 1.24.7 TV antenna socket outlet Each 1 157.37 157.37

16 1.27 Supplying and fixing following size/modules, GI box

along with modular base and cover plate for modular

switches in recess etc as required. 0.00

18 1.18 Supplying and drawing following pair, 0.5 sq.mm FR

PVC insulated copper conductor, unarmoured telephone

cable in the existing surface / recessed steel / PVC

conduit as required. 0.00

19 1.27.1 Supply, laying, testing and commissioning of the

following co-axial PVC insulated conductor cable in

existing surface / recessed conduit etc. and including

making terminal joints, complete as required. 0.00

20 1.53 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable

in the existing surface/ recessed Steel/ PVC conduit/

raceway as required. 0.00

c 3 run of cable Metre 350 142.48 49868.77

CONDUITING 0.00

Supplying and fixing of following sizes of steel conduit

along with accessories in surface/recess including

21 1.2 painting in case of surface conduit, or cutting the wall

and making good the same in case of recessed conduit

as required. 0.00

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

Supplying and fixing of following sizes of heavy class

PVC conduit along with accessories in surface/recess

including cutting the wall and making good the same in

case of recessed conduit as required.

DISTRIBUTION BOARDS 0.00

Supplying and fixing following way, Horizontal type three

pole and neutral, sheet steel, MCB distribution board,

415 volts, on surface/recess, complete with tinned

copper bus bar, neutral bus bar, interconnections,

powder painted including earthing etc. as required. (But

without MCB/RCCB/Isolator) 0.00

a 2.4.1 4 way (4 + 12), Double door, Horizontal Each 1 4349.96 4349.96

b 2.4.2 6 way (4 + 18) ,Double door, Horizontal Each 8 5288.85 42310.83

c 2.4.3 8 way (4 + 24), Double door, Horizontal Each 1 6344.71 6344.71

Supplying and fixing following rating, four pole, 415 volts,

24 2.13 isolator in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, (single

phase and neutral), 240 volts, residual current circuit

25 2.14 breaker (RCCB), having a sensitivity current upto 30

milliamperes in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10

kA, "C" curve, miniature circuit breaker suitable for

26 2.10 inductive load of following poles in the existing MCB DB

complete with connections, testing and commissioning

etc. as required. 0.00

a 2.10.1 Single pole Each 120 272.20 32664.58

Supplying and fixing single pole blanking plate in the

existing MCB DB complete etc. as required. 13.82

ERRECTION OF FAN & FIXTURE 0.00

Installation ,Testing, Commissioning of wall bracket

fittings of all sizes and shapes including LED lamps per

fitting, complete with all accessories including

connections etc. as required. 92.51

Installation, testing and commissioning of pre-wired,

fluorescent fitting / compact fluorescent fitting /

LED Fittings of all types, with all accessories and

29 1.41 tube etc. directly on ceiling/ wall, including each 76 16647.02

connection with 1.5 sq. mm FR PVC insulated, copper

conductor, single core cable and earthing etc. as

required. 219.04

Installation, testing and commissioning of pre-wired,

fluorescent fitting / compact fluorescent fitting /

LED Fittings of all types and shape, with all

30 accessories and tube etc. on falsceiling including each 175 46519.38

connection with 1.5 sq. mm FR PVC insulated, copper

conductor, single core cable and earthing etc. as

required. 265.83

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

Supply, Installation, Testing and Commissioning of 1200

mm sweep, BEE 5 star rated, ceiling fan with Brush Less

Direct Current (BLDC) Motor, class of insulation: B, 3

nos. blades, 30 cm long down rod, 2 nos. canopies,

shackle kit, safety rope, copper winding, Power Factor

not less than 0.9, Service Value (CM/M/W) minimum

6.00, Air delivery minimum 210 Cum/Min , 350 RPM

(tolerance as per IS : 374-2019), THD less than 10%,

remote or electronic regulator unit for speed control and

all remaining accessories including safety pin, nut bolts,

washers, temperature rise=75 degree C (max.),

insulation resistance more than 2 mega ohm, suitable for

230 V, 50 Hz, single phase AC Supply, earthing etc.

complete as required.

Installation of exhaust fan in the existing opening,

32 1.5 including making good the damage, connection,

testing, commissioning etc. as required. 0.00

Extra for fixing the louvers/ shutters complete with frame

for a exhaust fan of all sizes. 220.10

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia

including accessories, and providing masonry enclosure

with cover plate having locking arrangement and

watering pipe etc. with charcoal/coke and salt as

Earthing with G.I. earth plate 600 mm X 600 mm X 6

including accessories, and providing masonry enclosure

cover plate having locking arrangement and watering

2.7 metre long etc. with charcoal/ coke and salt as

required. 7944.98

Earthing with copper earth plate 600 mm X 600 mm X 3

thick including accessories, and providing masonry

with cover plate having locking arrangement and

of 2.7 metre long etc. with charcoal/ coke and salt as

required. 14713.95

Providing and fixing 25 mm X 5 mm G.I. strip on surface

or in recess for connections etc. as required. 259.45

Providing and fixing 25 mm X 5 mm Copper. strip on

surface or in recess for connections etc. as required. 1235.55

5.18 Providing and fixing 6 SWG dia G.I. wire on surface or in

39 recess for loop earthing along with existing surface/ Mtr 150 6698.79

recessed conduit/ submain wiring/ cable as required 44.66

6.2 Providing and fixing of lightning conductor finial, made of

25 mm dia 300 mm long, G.I. tube, having single prong

at top, with 85 mm dia 6 mm thick G.I. base plate

including holes etc. complete as required. 550.79

6.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on

parapet or on surface of wall for lightning conductor and

external lighting complete as required. (For Horizontal

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

6.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on

42 parapet or on surface of wall for lightning conductor Mtr 60 12568.21

complete as required. (For vertical run) 209.47

6.12 Providing and fixing testing joint, made of 20 mm X 3

mm thick G.I. strip, 125 mm long, with 4 Nos. of G.I.

bolts, nuts, chuck nuts and spring washers etc. complete

as required. 128.66

INTELLIGENT FIRE DETECTION AND ALARM SYSTEM 0.00

17.2.1 Supplying, installation, testing and commissioning of

micro processor based intelligent addressable main fire

alarm panel, central processing unit with the following

loop modules and capable of supporting not less than

240 devices (including detectors) and minimum 120

detectors per loop and loop length up to 2 km, network

communication card, minimum 320 character graphics/

LCD display with touch screen or other keypad and

minimum 4000 events history log

in the non volatile memory (EPROM), power supply unit

44 (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed

maintenance free batteries with automatic charger. The

panel shall have facility to connect printer to printout log

and facility to have seamless integration with

analog/digital voice evacuation system (which is part of

the schedule of work under SH: PA System) and shall be

complete with all accessories . The panel shall be

compatible for IBMS system with open protocol BACnet/

Modbus over IP complete as per

17.2.2 Supplying, installation, testing & commissioning of

central graphical fire alarm management system to

centrally monitor and operate the fire alarm system

complete as required. 213309.68

17.2.3 Supplying, installation, testing & commissioning of

repeater panel wih 320 character/ Touch screen LCD

display with inbuilt reset, acknowledge and silence

switches complete as required. 115567.95

17.2.9 Supplying, installation, testing & commissioning of

intelligent addressable thermal detector with rate of rise

cum fixed tempreature thermistor complete with base as

required. 2898.56

17.2.4 Supplying, installation, testing & commissioning of

48 intelligent analog addressable photothermal detector Each 117 355552.63

complete with mounting base complete as required. 3038.91

17.2.13 Supplying, installation, testing & commissioning of

intelligent addressable duct detector including suitable

Photo detector complete with base as required

17.2.5 Supplying, installation, testing & commissioning of

response indicator on surface/recessed MS Box having

two LED, metallic cover complete with all connections

etc as required. 293.47

17.2.14 Supplying, installation, testing & commissioning of

addressable manual call point complete as required. 4116.03

17.2.15 Supplying, installation, testing & commissioning of

addressable horn cum strobe complete as required. 3727.93

17.2.7 Supplying, installation, testing & commissioning of fault

53 isolator complete with base as required. Each 3 10430.97

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

17.2.10 Supplying, installation, testing & commissioning of

addressable fire control module complete as required 3193.09

17.2.11 Supplying, installation, testing & commissioning of

55 addressable phone control module complete as Each 3 10421.40

required. 3473.80

17.2.17 Supplying, installation, testing & commissioning of fire

fighter telephone handset complete as required. 6103.34

17.5.2 Supplying & laying of 2x1.5 sqmm fire alarm armoured

cable, 600/1000V rated with annealed copper conductor

57 having XLPE insulation, steel wire armouring & FRLS Each 2835 521500.80

outer sheath complete as required.

PA SYSTEM 0.00

Supplying, installation, testing & commissioning of 6

zone, voice alarm controller with USB, MP3 player

58 17.3.1 (including 6 zone button paging station) with seamless Each 1 134412.82

integration facility with main fire alarm panel for voice

evacuation complete as required. 134412.82

Supplying, installation, testing & commissioning of

1.5/3/6W ceiling speaker complete as required. 1026.08

Supplying, installation, testing & commissioning of

60 17.3.3 1.5/3/6W metal box ceiling/wall speakers complete as Each 2 3812.99

required. 1906.50

Supplying, installation, testing & commissioning of

61 17.3.4 ceiling/wall mounted loud speaker, 3/1.5 Watt in ABS Each 3 7745.08

enclosure complete as required. 2581.69

Supplying, installation, testing & commissioning of 6

inches dia, 2 watts, 70/100 volts ceiling speaker

required. 1955.41

Supplying, installation, testing & commissioning of digital

63 17.3.6 audio amplifier 50 Watt, 25V rms operating at 240 volt Each 3 308715.33

AC supply complete as required. 102905.11

Supplying, installation, testing & commissioning of digital

64 17.3.7 audio amplifier 75 Watt, 25V rms operating at 240 Volt Each 1 155021.70

AC Supply complete as required. 155021.70

Supplying, installation, testing & commissioning of Voice

65 17.3.9 command keypad 6 zone, with microphone assembly Each 1 86931.15

complete as required. 86931.15

Supplying and drawing of cable Fire Retardant PVC

insulated copper conductor cable in the existing surface /

66 17.5.3 recessed steel conduit of following pairs, cores and size

including connections and interconnections etc. as

required. 0.00

a 17.5.3.2 speaker cable Two pair, 2-core, 1.5 sqmm meter 5 473.17

b 17.5.3.3 speaker cable Three pair, 2-core, 1.5 sqmm meter 1890 247185.35

c 17.5.3.4 speaker cable Four pair, 2-core, 1.5 sqmm meter 50 8240.58

Cable End Termination & Pipes 0.00

Supplying and making ends termination with brass

compression glands and aluminium lugs for following

67 size of PVC insulated PVC sheathed

aluminiumconductor cable of 1.1 KV grade as required .

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

Providing, laying and jointing PVC/RCC NP-2 pipe with

Vin stiff mixture of cement mortar in the proportion of 1:2

(1 cement:2 fine sand) including trenching

68 (75 cm deep / or as required) i/c testing the joints etc. in

loose soil/under the flooring (before laying the finished

flooring) for electrical cable entrance to the building

complete as required i/c excavation and refilling of earth.

Supplying and laying of following size DWC HDPE pipe

ISI marked along with all accessories like socket, bend,

couplers etc. conforming to IS 14930, Part II complete

with fitting and cutting, jointing etc.direct in ground (75

cm below ground level) including

excavation and refilling the trench but excluding sand

cushioning and protective covering etc., complete as

a 14.16.1 63 mm dia (OD-63 mm & ID-51 mm nominal) metre 100 262.64 26263.51

b 14.16.2 90 mm dia (OD-90 mm & ID-76 mm nominal) metre 5 308.36 1541.79

c 14.16.3 120 mm dia (OD-120 mm & ID-103 mm nominal) metre 5 391.29 1956.47

d 14.16.4 160 mm dia (OD-160 mm & ID-135 mm nominal) metre 80 511.45 40915.78

e 14.16.5 200 mm dia (OD-200 mm & ID-175 mm nominal) metre 5 710.28 3551.42

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

B NON SCHEDULE ITEMS

DATA /TELEPHONE / EPBX

Supply and fixing following modular switch/socket on the

existing modular plate and cover plate & switch box

including connections but excluding modular plate etc.

Information Socket Outlet RJ -45 suitable for CAT 6 Data

Supply installation testing and commissioning of Super

Hybrid PBX Equipped with '- 03 Trunk Lines

- 80 Extensions

- Expandable to 8 Trunks & 100 Extensions

- With built in Auto Attendant

- With Built in Caller ID Card for 3 Trunks

Supply installation testing and commissioning of Key

Telephone Model KX-T-7730

(Single Line LCD Display with 12 Programmable Keys)

Supply installation testing and commissioning of

Analogue Telephone KX-T7705 '- Caller ID

- 5 Re-Dial memory

- LCD (7 Segment 2 Line) '- Speaker Phone

Supply installation testing and commissioning of DTF

Card for 16 Analog Extensions

Supply installation testing and commissioning of MDF

(Krone) & Connecting Cable (3 x 16)

WI FI AND NETWORKING

Supply, Installation, Testing and Commissioning of Dual

Band Radio High-Performance Wi-Fi unit MIMO

technology with following features including all

accessories complete as required & upto the satisfaction

of engineer in charge:

• Simultaneous dual-band, 2x2 MIMO technology in the

76 5 and 2.4GHz radio bands, max speed upto 1.167 gbps Each 0 34000.00 0.00

256 evices support

• 2.4GHz bands & 5 GHz band with speed upto 1.167

• Passive power over internet, Wattage-13W

• Long range upto 180 meters (650 feet) depending

upon various factors

• Wall/ ceiling / surface mounted

Supply, Installation, Testing and Commissioning of Dual

Band Radio High-Performance Wi-Fi unit MU-MIMO

technology with following features including all

accessories complete as required & upto the satisfaction

of engineer in charge:

• 4x4 Dual radio 2.53 Gbps performance

77 • 4 stream 802.11AC technology Each 3 52000.00 156000.00

• 2.4GHz bands with speed upto 800 Mbps and 5 Ghz

band with speeds upto 1700 Mbps, 500+ users

• Indoor 802.11 a/b/g/n/ac long unit

• Passive power over internet, Wattage-17W

• Long range upto 122 meters depending upon various

• Beam forming feature

• Wall/ ceiling / surface mounted

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

Supply, Installation, Testing and Commissioning of

OUTDOOR Dual Band Radio High-Performance Wi-Fi

unit MIMO technology with following features including

all accessories complete as required & upto the

satisfaction of engineer in charge:

• Simultaneous dual-band, 2x2 MIMO technology in the

5 and 2.4GHz radio bands, max speed upto 1.167 gbps

78 256 evices support Each 0 45000.00 0.00

• 2.4GHz bands & 5 GHz band with speed upto 1.167

• Passive power over internet, Wattage-13W

• Long range upto 180 meters (650 feet) depending

upon various factors

• Wall/ ceiling / surface mounted - for OUTDOOR

Supply, installation, testing and commissioning of 24

Port Gigabit PoE smart managed network switch with

24x10/1000BASE-T PoE ports, 4 Gigabit ports with 4

SFP, 24 PoE ports with 193 Watts power nudget,

79 Supports IP interfaces and static routes, IEEE 802.3az Each 1 50000.00 50000.00

energy efficient ethernet, 56 Gbps switching capacity,

QoS with Auto Voice VLANs for VoIP complete as

required & upto the satisfaction of engineer in charge.

Supply, installation, testing and commissioning of 16

Port Gigabit PoE smart managed network switch with

16x10/1000BASE-T PoE ports, 4 Gigabit ports with 4

SFP, 16 PoE ports with 193 Watts power nudget,

80 Supports IP interfaces and static routes, IEEE 802.3az Each 7 35000.00 245000.00

energy efficient ethernet, 56 Gbps switching capacity,

QoS with Auto Voice VLANs for VoIP complete as

required & upto the satisfaction of engineer in charge.

Supply, installation, testing and commissioning of 8 Port

Gigabit PoE smart managed network switch with

8x10/1000BASE-T PoE ports, 4 Gigabit ports with 4

SFP, 8 PoE ports with 193 Watts power nudget,

81 Supports IP interfaces and static routes, IEEE 802.3az Each 1 25000.00 25000.00

energy efficient ethernet, 56 Gbps switching capacity,

QoS with Auto Voice VLANs for VoIP complete as

required & upto the satisfaction of engineer in charge.

Supply, Installation, Testing and Commissioning of

accessories like RJ 45 connectors, mounting kits, power

injectors etc required to make the system functional upto

the satisfaction of engineer in charge.

Supply & Installation of CAT 6 UTP jack information

outlets complying fully or exceeding with category 6

connecting hardware specifications for all pair

83 combinations up to 250 MHz. Outlets shall use lead Each 55 450.00 24750.00

frame technology, non PCB pyramid type. Complete as

required and as per technical specifications. (Wi-fi

Supply & Installation of CAT 6 UTP jack information

outlets complying fully or exceeding with category 6

connecting hardware specifications for all pair

84 combinations up to 250 MHz. Outlets shall use lead Each 55 450.00 24750.00

frame technology, non PCB pyramid type. Complete as

required and as per technical specifications. (Data

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

Supply & Installation of CAT 6 UTP jack information

outlets complying fully or exceeding with category 6

connecting hardware specifications for all pair

85 combinations up to 250 MHz. Outlets shall use lead Each 55 450.00 24750.00

frame technology, non PCB pyramid type. Complete as

required and as per technical specifications. (Telephone

Supply & Installation of Dual Face Plates along with

86 clearly printed labels and holders complete as required Each 2 250.00 500.00

and as per technical specifications.

Supply & Installation of Single Face Plates along with

87 clearly printed labels and holders complete as required Each 55 225.00 12375.00

and as per technical specifications.

Testing and commissioning of complete system and

88 making the system functional Each 1 24000.00 24000.00

Server at per site Requirement with required Cyber

89 security software ( in Client's scope) Each 1 24000.00 24000.00

Supply installation testing commissioning of following

item including all assceesores as required for complete

functioning o access control system including softaware

and programming as required

Supply installation testing commissioning of Proximity

90 Deleted (Frequency;125KHz, Read range;5 cm~15 cm, Card Each 0 3250.00 0.00

read time:0.1 sec (typical), Color:Beige,

Dimensions:44 x 88 x 20mm)

Supply installation testing commissioning of Proximity

91 Deleted (Frequency;125KHz, Read range;5 cm~15 cm, Card Each 0 3250.00 0.00

read time:0.1 sec (typical), Color:Beige,

Dimensions:44 x 88 x 20mm)

Supply installation testing commissioning of Proximity

92 Deleted (Frequency;125KHz, Read range;5 cm~15 cm, Card Each 0 3250.00 0.00

read time:0.1 sec (typical), Color:Beige,

Dimensions:44 x 88 x 20mm)

Supply installation testing commissioning of Proximity

93 Deleted (Frequency;125KHz, Read range;5 cm~15 cm, Card Each 0 3250.00 0.00

read time:0.1 sec (typical), Color:Beige,

Dimensions:44 x 88 x 20mm)

Supply installation testing commissioning of Door

(with On Board TCP-IP, 8 Readers (4 IN/4 OUT), 4

94 Deleted relays, 25360 Card Holder Capacity, 55510 Transaction Each 0 24500.00 0.00

Storage Capacity, Timer/Time Zone/APP sets/

Holidays/Anti Pass back, 16X2 LCD Display, PCB

Version in metal Housing, Compatible with SYSOFT

series for PC connectivity to download IN / OUT data)

Supply installation testing commissioning of

95 Deleted Electromagnetic Lock Each 0 2950.00 0.00

96 Deleted Supply installation testing commissioning of U/L Bracket Each 0 750.00 0.00

Supply installation testing commissioning of Exit Push

97 Deleted Each 0 750.00 0.00

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

Supply installation testing commissioning of Power

98 Deleted Each 0 3500.00 0.00

Supply (5Amp. With battery back up)

Supply installation testing commissioning of SYW95A-

99 Deleted Each 0 1500.00 0.00

(Software for Multi Door Controller; Including Ethernet

based Data Converter(Only for SY330NT4-N-SV5-G)

100 Deleted Supply installation testing commissioning of RFID Cards Each 0 25.00 0.00

Supply installation testing commissioning of Biometric -

(Finger print Time Attendance Access Control System,

Fingerprint Templates:1000, Card capacity:1,000,

101 Deleted Each 0 9500.00 0.00

Transaction Storage:100000, TCIP/IP, USB host

Communication, Mini Speaker, Self Service Query,

Support push button)

SITC of light fixtures suitable for LED fixture, lamps with

all components and accessories including but not

restricted to reflectors, housings, lamp holders and

including cost of ballasts and cost of lamps complete as

required and as below Make:-Bajaj,Havells,Polycab or

20W LED Tube light of Havells Cat Ref:

LUMILINESMART20WLED865PCWH or equivalent.

Recessed mounted 20 W Downlighter of Havells Cat

Ref:Havells GLOWDLR15WLED830S or equivalent.

Recessed mounted 18 W Downlighter of Havells Cat

Ref:Havells GLOWDLR15WLED830S or equivalent.

Surface mounted 18W LED Downlighter of Havells Cat

Ref:Havells EDGESURFACERDDLR18WLED840S or

28/30 W, 2x2 Panel recess mounting luminaire . of

d Havells Cat Ref: PLANO2X2PLR30WLED840SG2, or Nos. 107 7039.00 753173.00

15W Mirror Light of Havells Cat Ref:

LUMILINEXS17WLED865SPCWH or equivalent.

10W LED Bulk Head of Havells Cat Ref:

e RUGBYGENXFTS10WLED865SSYMBOPC or Nos. 3 1528.00 4584.00

Supplying of under note sizes of heavy duty exhaust

fans complete with fan motor, blades fixing frame,

louver etc as required of havells makes or equivalent.

450 mm exhaust fan 900 RPM Each 5 2968.00 14840.00

Supply, installation, testing and commissioning of 20

kVA,3 Phase input and 3 Phase output UPS with

alongwith lead acid batteries giving a back up of min. 30

104 min. at full load as per specification alongwith all Each 1 550000.00 550000.00

accessories including interconnecting cables, lugs, Base

Frames, Battery Rack & Battery Circuit breaker, palral kit

complete as required.Schneider / ABB/ Autometers

IP CCTV SURVEILLANCE SYSTEM

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

Supply installation Testing and Commissioing Fixed

Lens Outdoor Bullet Camera - Supplying, Installation,

testing & commissioning of 2MP H.265 NW IR vandal

proof bullet Camera, 0.03Lux (Color), 0Lux (B/W, IR

LED on), 2.8mm fixed lens, 30fps@2M all resolutions,

120dB WDR, H.265, H.264, MJPEG codec supported,

Triple stream , Inbuilt Analytics - Defocus detection,

Directional detection, Motion detection, Enter/Exit,

Tampering, Virtual line, Audio in , alarm in & out, Micro

SD/SDHC/SDXC memory slot (Max. 128GB), IR

viewable length 20m, IP66, IK10, PoE, CE, FCC, UL,

NDAA complaint, Non-Chinese.

Supply installation Testing and Commissioing Varifocal

Lens Outdoor Bullet Camera - Supplying, Installation,

testing & commissioning of 2MP H.265 NW IR vandal

proof bullet Camera, 0.03Lux (Color), 0Lux (B/W, IR

LED on), 3.2mm - 10mm Varifocal lens, 30fps@2M all

resolutions, 120dB WDR, H.265, H.264, MJPEG codec

supported, Triple stream , Inbuilt Analytics - Defocus

detection, Directional detection, Motion detection,

Enter/Exit, Tampering, Virtual line, Audio in , alarm in &

out, Micro SD/SDHC/SDXC memory slot (Max. 128GB),

IR viewable length 20m, IP66, IK10, PoE, CE, FCC, UL,

NDAA complaint, Non-Chinese.

Supply installation Testing and Commissioing Network

Video Recorder - Supplying, Installation, testing &

commissioning of 32CH NVR , Dual monitor video out

107 support, H.265, H.264, MJPEG compression support, Each 1 1,75,000 1,75,000

ONVIF support, 8 internal HDDs, i/c RJ45 connector i/c

connection etc, supports, N+1 failover, UL, BIS.

complete as required

Supply installation Testing and Commissioing of Client

Viewing Video Sofware.

Supply, Installation, Testing and Commissioning of

Surveillance Hard disk - 6 TB Storage. Recording

parameter: 30 days of recording at FULL 1080p, 25fps

H.264 compression, complete as required.

Supply, Installation, Testing and Commissioning of Client

Desktop PC with Core i7 processor, 8GB RAM, | TB

HDD, Windows 64 bit OS, external DVD writer, wireless

110 leyboard, wireless mouse, 2GB Graphics card with dual Each 1 1,45,000 1,45,000

monitor support, complete with high quality 5 mtrs HDMI

cables for connecting displays (2 displays per unit),

complete as required.

Supply, Installation, Testing and Commissioning of 55"

111 or better 4K professional displays for 24x7 CCTV Each 1 1,65,000 1,65,000

application, complete as required.

Supply, Installation, Testing and Commissioning of

Networking Rack of 9U along with PDU (With surge

protection), cable manager, fan etc for Switches & other

accessories etc, complete as required.

Supply, Installation, Testing and Commissioning of

Networking Floor Standing Rack of 42 U along with PDU

113 (With surge protection), cable manager, fan etc for Each 1 85,000 85,000

Switches, Servers & other accessories etc, complete as

Supply, Installation, Testing and Commissioning of Layer

114 II Smart Managed Gigabit Ethernet switch: 8 port RJ45 Each 2 19,000 38,000

10/100/1000 T (POE), , complete as required.

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

Supply, Installation, Testing and Commissioning of Layer

115 II Smart Managed Gigabit Ethernet switch: 16 port RJ45 Each 1 19,000 19,000

10/100/1000 T (POE), , complete as required.

Supply, Installation, Testing and Commissioning of SFP

modules (1G/10G), complete as required.

Supply, Installation and Commissioning of RJ-45 i/o Jack

with Plate & mounting Gang Box, complete as required.

AUDIO VIDEO SYSTEM (Conference Hall )

Supply installation testig and commissioning of LG

Interactive Display - 86", LG - 86TR3DJ

Brightness : 390 nit (w/o Glass, Typ.)

118 Deleted Multi Touch Point : 20 Points (Max.) Each 0 413000.00 0.00

Interface : HDMI (3), RGB (1), Audio In (1), RS-232C In

(1), RJ45 (1), USB 3.0 Type A (3), USB 2.0 Type A (3),

Audio Out / Optical Output, Touch USB (2)

Supply installation testig and commissioning of Video

Conferencing Solution

Supports sharp video quality of up to 4K Full-HD video

output, Runs on Android 9.0 operating system, Remote

video screen real[1]time control and sharing PC screen

functions, Advanced camera with 8M pixel CMOS

sensor, FOV wide-angle lens, 12x zoom and PTZ for

easy camera view adjustments

Supply installation testig and commissioning of

Capacitive touch mute button with LED, 1500mA built-in

Li-Ion battery, Micro-B port for charging, BYOD

microphone and upgrading, Low power indicator,

Bluetooth v2.1+EDR protocols, Proprietary 2.4GHz

wireless technology with dynamic beamforming

Supply installation testig and commissioning of Audio

121 Audiotrak 120W Class D RMS Mixer Amplifier Each 1 159000.00 159000.00

2x MIC, 1xLine, 1xEMC, 2xAUX & 4x Phonejack MIC

Input, Rack Mount

Supply installation testig and commissioning of Ceiling

122 Speaker for PA application Each 6 4000.00 24000.00

9W 5 inch ABS White Indoor Ceiling Mountable Speaker

Supply installation testig and commissioning of Gold

Plated HDMI Cable

Supply installation testig and commissioning of 4K

5000/6000 Lumen 4K UHD Laser Projector, 4K UHD

resolution (3,840 x 2,160)

Supply installation testig and commissioning of

125 Projector Screen Each 1 159300.00 159300.00

120 inch Motorised Screen

Supply installation testig and commissioning of

126 Deleted Conference Room Automation Controller Each 0 312700.00 0.00

( for Lighting, Screen, Blinds, and Hardware On / OFF

Supply installation testig and commissioning of

Automation Relay module for Lighting - 2 channel

Supply installation testig and commissioning of Lighting

Dimmer for Lighting / Blinds - 2 channel

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

Supply installation testig and commissioning of

129 Deleted Automation Keypad Each 0 91500.00 0.00

8/10 Buttons Keypad for Automation

130 Deleted Supplying, Installation, Testing & Commissioning of 13

Passenger lift (Machine Room Less) 1088Kg. serving Each 0 2050000 0.00

different floors as per specifications as under:-

(i) Speed: 1.0 meter per second (MPS)

(ii) Floor: Stilt + 2 Upper floors

(iii) Travel: 12.0 mtrs. (S + 2 Upper floors)

(iv) Stops & Opening: 3 Nos.

(v) Operation: Microprocessor Based Simplex Selective

Collective Control Withh / Withhout Attendant

(vi) Automatic rescue device complete withh dry

maintenance free batteries as reqd.

(vii) Controller: ACV3F

(viii) Power: 400/415 Volts (3 Phase AC)

(ix) Type of doors:

(a) Car: Power operated, centre opening horizontal sliding

Stainless Steel honey comb finish.

(b) Landing doors: Stainless Steel honey comb finish.

(x) A hand rail not less than 600mm long at 900mm above

floor level to be fixed on all three sides of the lift car.

(xi) A mirror at 750mm above car floor level to be installed

on rear side of the car.

(xii) Voice announcement system in the car to announce the

position of the elevator in the hoist way as the car

passes or stops at a floor served by the elevators.

(xiii) Brail signage/button both inside and outside of car.

(xiv) Fire man swithch

The BOQ shall be read in conjunction with general

notes, specification and equipment schedule and single

Supply and installation of the following cubical type

panels ( Partial Type tested ) made of 14 gauge CRCA

structure, base channel, doors & partitions complete

with, Air Circuit Breaker, moulded case circuit breakers,

meters, indicating lamps, current transformer etc.

Complete in all respects, insulated bus bars with heat

shrinkable PVC sleeve in suitable bus chambers,

interconnection, small wiring, name plate, danger plate,

earth bus etc. & comprising of compartments with hinged

door for each feeder & its accessories, cable alley with

hinged doors, bus chamber with bolted door etc. The

panel being of dust & vermin proof construction with

rubber gasket, attractively powder coated with Siemens

grey shade and having orange peel finish. The panel

shall be free standing type/ wall mounted type as per

relevant drawing, Equipment schedule, specifications

including all materials, accessories, loose supplied

items, etc. required for completeness of the project

majorly comprising of following : -

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

ACB shall have a rated operational voltage of 415V AC,

rated insulation voltage of 1000 volts AC, rated impulse

voltage of 12kV.ACB shall be Moulded Case design and

shall comply with standards IS/IEC 60947-1 & 2. with Ics

= Icu = Icw (1sec) = 50kA.

Both fixed & draw-out circuit breakers shall have single

pole-pitch. ACBs upto 3200A shall be provided with top

horizontal and bottom vertical terminal adapters on both

sides for proper cable connections/bus duct connections.

Shunt trip and closing coil (having common AC/DC

supply upto 250V) shall be continuous rated.

There Should be On, Off, Trip, Spring Charge and

Ready to close Indication lamp for all ACB on the panel

ACB trip unit shall be EMC/EMI tested and should have

a display for measurement of current and voltage. It shall

be possible to view last 5 trip cause on trip unit.

Separately powered, individual fault trip indication LEDs

(For O/L, S/C, E/F and trip unit failure) shall be available

on the trip unit which shall function even if the display

fails.All ACB shall be EMS compitable.

All MCCBS shall be with Extended type Front door

operating handle, Phase Spreaders & Phase Barriers

complying to IS/IEC 60947-1 & 2.

MCCBs shall be current limiting type preferably having

an encapsulated double break design, with rated

operational voltage (Ue) of 415V, insulation voltage (Ui)

of 690 V (AC 50/60 Hz) & impulse voltage (Uimp) of not

The electrical life of MCCBs shall be 8,000 operations up

to 250A & 4000 operations up to 630A and shall be of

single frame size upto 250A.Cable Termination on

MCCB should be done using circular lugs being fixed

with a bolt passing through.

For E/F in MCCBs wherever required , external

earthfault module with CBCT should be used with

indication lamp on the panel and fault sensitivity

selection from 20% – 60% In. and time delay selection in

case of Earth Fault from 0.5 to 3 Sec/ instantaneous.All

incomer MCCB should be with E/F protection also.There

Should be On, Off, Trip, and electrical fault trip Indication

lamp for all MCCB on the panel door. Separate fault

differentiation indication (LED) for Over current and

Earth fault. Indication for over current and earth fault

tripping shall be extended to the panel door via

indication lamps..All MCCB shall be EMS compitable.

All MCCBs of ratigs above 250A shall be microprocessor

based and upto 250A shall be Thermal Magnetic Type

and with Min 35 kA Rating .

ON, OFF, Trip and Ready to close status for each ACB

and ON, OFF Trip staus for all Incommer MCCB shall be

avilable on MODBUS.

Control Voltage for Closing / Tripping coils , Spring

charging motor & Indicting lamps in Manually /

Electrically operated ACB Feeder shall be 230 V AC/

Metering CTs burden shall be with suitable VA &

accuracy class .5

CTs shall be "CAST RESIN" type .

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

All indication lights shall be LED type.

All energy meter shall be "DIGITAL" type with Modbus

Protocol as per techncial Specification

Panel Manufacturer should have Type Test Certificates

for Short Time withstand current test of 50KA for 1.0 Sec

from CPRI. Bhopal / Bangalore.

Control SP MCB's of 2A Rating shall be provided for

each metering circuit.

20% spare control terminal to be provided.

Live parts shall not be accessible after opening the door,

Transparent acrylic sheet to be provided to cover the

same & busbar joints section shall be covered with PVC

All bus bar shall be insulated with coloured PVC Sleeve

i.e. R, Y, B, BK as per colour code.

All internal control wiring shall be heat resistant type.

All TP/TPN feeders shall have solid isolable neutral link.

All starters shall be provided with Auto/ Manual selector

switch, MPCB/ MCCB/MCB, over load relay, single

phasing preventor, ON/OFF/ Trip/ Trip on Eclectrical

Fault indication lamps, ON/OFF push Buttons,

contractor and suitable No. of Potential free contacts for

remote / local operations, indication, interlocking and

Building Management system.

Current density for bus bar shall not be more than

0.8A/Sqmm. Rating of Bus bar is after considering all

derating factors. (Bus bar sizing calculation to be

submitted for approval.)

All TP/TPN feeders shall have solid isolable neutral link.

Bus couplers shall be provided with ON & OFF indicating

lights but without releases.

All feeders shall be provided with door interlocked with

door defeat, pad lock facility.

Spare contacts of Relays/Contactor etc. shall be wired

upto terminal block.

Degree of protection for following type of distribution

panel enclosure shall be as per IS:13947-1993.

IP 43 for indoor panels.

IP 55 for outdoor panels.

Contractor and panel builder shall have to submit the GA

drawing and get approval from consultant before

131 MAIN LT PANEL

2 No.320A, 4-pole MCCB

2 No.320A, 4-pole Contactor

Metering & Indication:

Multifunction digital meter with Class 0.5 active energy

Accuracy with Sag/Swell - Waveform capture and

Individual harmonics monitoring upto 63rd. Power

Quality analyser needs to be capable of Disturbance

direction detection with onboard ethernet Port

Set of ON/OFF/Trip/Trip Circuit healthy/ready to close

Sets of phase indicating lamp with 2A control MCBs.

Auto trip indicating lamps protection by 2A Control MCB

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

All incomer with buscoupler shall be mechanically and

electrically interlock.Consider all necessary software and

hardware for proper functioning of interlocking.It shall

operate auto on and auto off of breaker and then auto

1 Nos.200A, 4P MCCB as Buscoupler

500A, TPN aluminium, colour coded bus bars suitable

for 415V, 50Hz with fully rated neutral.(After deration)

1 Nos.200A, TPN MCCB

2 Nos.100A, TPN MCCB

6 Nos.63A, TPN MCCB

7 Nos.40A, TPN MCCB

2 Nos. Bulb with holder

Panel shall be suitable for incoming & outgoing supply

with cables,and top / bottom entry as required.

2 No.63 A, TPN MCCB

1 No.63 A, 4P Bypass

Metering & Indication:

Combined Ammeter/Voltmeter with Selector Switch and

160/5A, CL-1, 10VA CTs and 2A control MCB.

Set of ON/OFF/Trip/Trip Circuit healthy/ready to close

Sets of phase indicating lamp with 2A control MCBs.

100A, copper busbar for R,Y,B and 200A for Neutral,

colour coded bus bars suitable for 415V, 50Hz with fully

rated neutral.(After deration)

4 Nos.32A, TPN MCCB

2 Nos.16A, TPN MCCB

2 Nos.16A, DP MCCB

2 Nos. Bulb with holder

Panel shall be suitable for incoming & outgoing supply

with cables,and top / bottom entry as required.

Supply & Laying of 1.1KV grade multicore aluminium

conductor XLPE insulated and PVC sheathed armoured

133 cable conforming to IS : 7098 (Part-I) 1998 along walls/

on existing cable trays etc. in an approved manner and

as per follows;

g 4x25 sqmm mtr 30 0.00

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

Constructing Masonry chamber 60x60x75 cm (deep)

inside with 75 class designation FPS brick work in

cement mortar 1:4 (1 cement: 4 coarse sand) (for cable

entry) with 10 mm thick M.S. hinged cover plate on top in

134 40 x 5 mm MS angle iron frame embedded in C C 1:2:4 each 4 7500.00 30000.00

i/c necessary excavation and inside plastering with

cement mortar 1:3 (1 cement:3 fine sand) finished with a

floating coat of neat cement complete as required and as

per specifications attached.

Constructing masonry chamber 60 cm x 45 cm x 50 cm

(deep) inside with 75 class designation FPS brick work in

cement mortar 1:4 (1 cement : 3 coarse sand) (for cable

entry) with 10 mm thick M.S. hinged cover plate on top

135 in 40 x 40 x 5 mm MS angle iron frame embedded in C C each 2 6000.00 12000.00

1:2: 4i/c necessary excavation and inside plastering with

cement mortar 1:3 (1 cement:3 fine sand) finished with a

floating coat of neat cement complete as required and as

per specifications attached.

EXTERNAL LIGHTING

Supplying and fixing (with suitable MS clamp) 300mm

136 long 65mm dia MS pipe with base plate i/c nipple for each 2 3384 3386.00

Supplying, installing, testing & commissioning of 4.5

Mtr long single dip Galvanised steel octagonal

poles in 3mm sheet integrated connector box

inside the pole containing one no. 5A MCB , Neutral

link and earth terminal with single over hang

bracket 1m long ; providing and fixing in

position 1:2:4 reinforced cement concrete foundation

137 for the pole, size 500mm(L)X500mm(W)X 1650mm each 15 28000 28015.00

deep i/c excavation of earth, providing, cutting, bending

and placing in position reinforcement as per drawing

and providing PVC flexible pipes 50mm dia for cable

entry and exit as required i/c foundation bolts,

transportation, handling, marking etc. as per

specification and drawings as required of Havells/ Bajaj

Supply and installation of following arms suitable for

4.5 Mtr to 9 mtr street light pole

a Single Arm over hang bracket 1mtr length each 12 3384 40608.00

b Double Arm over hang bracket 1mtr length each 3 4600 13800.00

Providing and erection of black painted galvanized 3

meter high poles in different section, top 60mm dia.,

bottom 100mm dia. with gold colour painted ornamental

cast aluminium ring having lockable weather proof flush

door junction box in bottom section, and suitable

arrangement for installation of CCTV and with base plate

dia. 290mm having 4 holes of 22mm dia. complete

erected in an approved manner including foundation of

Suitable size & type of foundation bolts as required. (For

supply & drawing 3 core 2.5 sqmm

unarmoured copper cable inside the GI

140 Octagonal pole from connector box to the light Set 15 1083 16245.00

fixture including connections with thimbles as required

upto 9m high pole

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

Supplying and fixing (with suitable MS clamp) 1200mm

long vertically and 900mm inclined at 45 degree, 65mm

dia MS pipe with hardware i/c nipple for street

light.(boundary wall light)

Supplying and fixing of LED Bollard Fitting 600mm High

with IP65 and IK07 Housing made up of aluminum pipe

powder coated black after phosphochromate treatment

with aluminum heat sink for effective thermal

management Complete with Mounting Brackets &

accessories as required with connections similar. Havells

142 Mount Bollard 0.60 mtr 5700K Set 4 5771 23084.00

MOUNTBLMINIMOUNTBL10WLED830PSYMTOPMMA

S . The product should be BIS approved with R number

mentioned on product label. To be supported with

Product test reports - LM79, Is 10322/IEC 60598 and for

LEDs - LM80, RoHS and Photo Biological Safety

Supplying and fixing of Spike Light LED of Havells cat

no. IRVINESPS5WLED830PSYMTG or equivalent.

Supply, fixing &testing of prewired external light fixture

having Die-cast housing with epoxy coating and

having profiled cooling fins at the top for effective

144 heat dissipation, separate driver and LED lamp

cavity, heat resistant toughened clear glass cover with

high transmittance and high quality gasketing

system, high power LED complete as required.

25 Watt LED Fitting Lighting lantern on GATE/ POST

TOP of Havells Cat

no.CORALMINIPT15WLED757PSYMTOPC or

Street Light Luminare of 60 watt LED including suitable

fixing MS clamps etc.as requird of Havells Cat No.

ENDURASUNDOWNSL60WLED765PASYBOTG or

Street Light Luminare of 35 watt LED including suitable

fixing MS clamps etc.as requird of Havells Cat No.

ENDURASUNDOWNSL35WLED765PASYBOPC or

Floodlight LED luminaire 50 Watas with high pressure

die cast housing with IP66 deg of protection of

v Havells Cat No. each 6 5429 32574.00

JETAQUANTOPLUSFLP50WLED757SYMLENS or

Supplying, Installation, testing and commissioning of

70KWP grid interactive roof top solar photo voltaic

power generation system including mountning

structure,solar panel,inverter,DC and AC distribution

145 Deleted box/ Junction box,suitable rating of Ac and DC Set 0 650000 0.00

cabling,earthing,Lightning arrester,controlling and other

necessary software and hardware as required for proper

generation and distribution of solar power into grid

DSR TOTAL Rs. 86,35,342.14

NON DSR TOTAL Rs. 76,14,525.00

DSR + NON DSR TOTAL Rs. 1,62,49,867.14

Name of Project: WELFARE BUILDING , BOKARO STEEL PLANT

1 SUBHEAD-I(Sanitary Fixtures & CP Brass Fittings) 6,05,939 2,79,558

2 SUBHEAD II(Soil, Waste, Vent & Rain Water Pipes) - 13,76,091

3 SUBHEAD III(Water Supply System(Internal)) 1,86,587 84,846

4 SUBHEAD IV(External Sewerage & Storm Water Drainage) 4,13,215 94,200

5 SUBHEAD V(External Water Supply) 24,406 -

GRAND TOTAL 30,64,842

GRAND TOTAL 30,64,842

Digitally signed by PRIYA

Name of Project: WELFARE BUILDING , BOKARO STEEL PLANT

PLUMBING WORKS DETAILED ESTIMATE

S.I DSR MR Description of Item Unit Total Qty MR DSR

No Item No Item No Rate Amount Rate Amount

SUBHEAD-I(Sanitary Fixtures & CP Brass Fittings)

1.1 17.78 Providing and fixing white vitreous china extended wall Each 22 13861.76 3,04,958.80

mounting water closet of size 780x370x690 mm of

approved shape including providing & fixing white

vitreous china cistern with dual flush fitting, of flushing

capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres),

including seat cover, and cistern fittings, nuts, bolts and

gasket etc complete.

2 17.7 Providing and fixing wash basin with C.I. brackets, 15

mm C.P. brass pillar taps, 32 mm C.P. brass waste of

standard pattern, including painting of fittings and

brackets, cutting and making good the walls wherever

2.1 17.7.2 require:

White Vitreous China Wash basin size 630x450 mm with Each 25 3153.322 78,833.06

single 15 mm C.P. brass pillar tap

3 17.22A Providing and fixing CP Brass 32 mm size Bottle Trap of Each 25 942.3496 23,558.74

approved quality & make and as per the direction of

Engineer-in-charge.

4 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8)

kitchen sink as per IS:13983 with C.I. brackets and

stainless steel plug 40 mm, including painting of fittings

and brackets, cutting and making good the walls

4.1 17.10.1 wherever

Kitchen required:

sink with drain board

5 MR 5 Fixing of 15 mm C.P brass wall mounted mixing fittings Each

swinging spout for sink complete including cutting

and making good the walls where required. (Pantry, 4 5388.00 21,552.00

Kitchen, Coffee-Break etc.)

6 17.4 Providing and fixing white vitreous china flat back or

wall corner type lipped front urinal basin of

430x260x350 mm and 340x410x265 mm sizes

respectively with automatic flushing cistern with

standard flush pipe and C.P. brass spreaders with brass

unions and G.I clamps complete, including painting of

fittings and brackets, cutting and making good the walls

6.1 17.4.1 and floors

One urinal wherever

basin withrequired :

5 litre white P.V.C. automatic Each 14 5602.368 78,433.15

flushing cistern

7 MR 7 Providing and fixing in postion storage type automatic

electric water heater pressure type thermostatically

controlled, single phase wall mounted of approved

make (to the approval of Engineer-in-charge) with

thermostats, inner container of stainless steel, Inner

glass lining with B-Rating minimum 3 stars complete

with 1 Mtr. three core flexible cord with plug, non

return valve and pressure release valve complete

including fixing and testing complete in all respect.

7.1 MR 7.1 15 litre capacity water heater Each 4 13470.00

Digitally signed by PRIYA

PLUMBING WORKS DETAILED ESTIMATE

S.I DSR MR Description of Item Unit Total Qty MR DSR

No Item No Item No Rate Amount Rate Amount

8.1 MR 8.1 Each

Supply installation testing commissiong water coolers

storage capacity 80ltr,and cooling cpacity 60Ltr/h with

inbuilt RO+UV purification, The system should consist of

last point purification,7 stage filtration and electronic

eye. Food grade SS304 stainless steel inner tank for

storage of contamination free water. In situ PUF

insulation not only reduces power consumption but also

keeps water cool even in long power cuts.Unique 7

stage filtration: neo sense filter 10" x 2.5" Dia ,Resin

filter 10" x 2.5" Dia, carbon filter-10" filter-10" x 2.5"

Dia, Activated carbon block filter, Booster Pump to

pressurize 300DP-2 Nos, Membrance 300 GDP , – 2 Nos,

Pressure Meter-1 Nos, Auto Flushing Solenoid Valve -1

Nos, Production Rate-Up to 50-60 Lph. Feed Water 1000

ppm. Max. (Raw Water) Recovery Appx. 60%, Power

Consumption 24 Volt DC -1 Nos 60 ltr pressure tank

Pressure wave enclosed tank Single diaphragm, NSF

Certified, virgin polypropylene liner, tow part

polyurethane, epoxy primed paint finish, leak free, o

ring sealed air valve cap. UV Light Alfa uv light. etc as

site required and as per the direction of Engineer in

9 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible Each 22 318.2989 7,002.57

tube upto 1 metre long with S.S. triangular plate to

Eureopean type W.C. of quality and make as approved

by Engineer - in - charge.

10 18.53 Providing and fixing C.P. brass angle valve for basin Each 77 532.0222 40,965.71

mixer and geyser points of approved quality conforming

11 17.28 Providing and fixing P.V.C. waste pipe for sink or wash

basin including

11.1 17.28.2 Flexible pipe

12 MR 12 Providing & Fixing in position C.P. Brass coat hook of

approved make (to the approval of Engineer-in-charge )

fixed into wall with C.P. brass screws and rawl plugs etc.

complete in all respect.

12.1 MR 12.1 C.P.Brass coat hook Each 22 962.00 21,164.00

13 17.31 Providing and fixing 600x900 mm beveled edge mirror Each 25 1500.476 37,511.89

of superior glass (of approved quality) complete with 6

mm thick hard board ground fixed to wooden cleats

with C.P. brass screws and washers complete.

14 17.72 Providing and fixing PTMT towel ring trapezoidal shape Each 22 217.6575 4,788.47

215 mm long, 200 mm wide with minimum distances of

37 mm from wall face with concealed fittings

arrangement of approved quality and colour, weighing

not less than 88 gms.

15 17.71 Providing and fixing PTMT liquid soap container 109 Each 25 155.5076 3,887.69

mm wide, 125 mm high and 112 mm distance from wall

of standard shape with bracket of the same materials

with snap fittings of approved quality and colour,

weighing not less than 105 gms.

SUBHEAD II(Soil, Waste, Vent & Rain Water Pipes)

Digitally signed by PRIYA

PLUMBING WORKS DETAILED ESTIMATE

S.I DSR MR Description of Item Unit Total Qty MR DSR

No Item No Item No Rate Amount Rate Amount

16 MR 1 Supply, installation , testing commissioning of PP

Mineral filled low noise Soil & Waste system as

per EN 12056, with density 1.9 g/cm3. PP

mineral(Astolan) filled Low noise system should has

a fire classification DIN 4102-B2/EN13501 . Product

should have a chemical resistance of pH 2-12 and is

a complete sound protection system according to

DIN 4109. including with push fit rubber ring sockets

all necessary fittings and specials such as Bends,

junctions, offsets & vent cowl. Fixing at wall/ceiling

level supported by rubber line bracket & hangers

etc. duly epoxy coated. Cutting, chases/holes in

floors / walls / slab.Compliant with LABC. Weight

mass per unit area of DN100MM should not be less

than 110.07kg/m3. sound levels of not more than

15dBA as per EN 14366 at a flow rate of 4

l/s.including all core cut ,chases ,cutting making

17 MR 2 Providing fixing, testing and commissioning in position

Solfit SWR uPVC PIPE TYPE-B pipe comforming to

IS:13592 including all fittings such as bends, junctions,

inspection doors, offests, cowl, access pieces/clean out

plugs, clamps /supports/ hangers etc. jointing with PVC

Adhesive joints including cutting holes in walls, core

cutting in slabs and making good the same. All complete

as per specification and direction of E/l.(For rainwater

17.1 MR 2.1 piping)

18 MR 3 Providing Fixing straight /offset type single body push fit

type WC pan connector with factory supplied spring

loaded seal guard with integral single mould sealing

fins made of flexible EVA body, including

bush/adaptor as supplied with the pan connector (if Each 22 800.00 17,600.00

19 MR 4 Providing and fixing floor drain (FD) with 50mm/40mm

outlet and one 40mm inlet for waste, with SS grating

(adjustable height), having 50mm water seal and in-

built NRV Each 9 450.41 4,053.71

20 MR 5 Providing and fixing PP/UPVC trap of self cleansing design

with screwed down or hinged grating with or without vent

arm complete, including cost of cutting and making good the

walls and floors :

20.1 MR 5.1 100 mm inlet and 100 mm outlet

20.1.1 MR 5.1.1 Sand cast iron S&S as per IS: 3989 Each 31 3986.29 1,23,575.14

21 MR 6 Providing and fixing PP/UPVC grating with Cockroach

proof strainer of approved design including setting

in floor with cement motor to match with floor finish

as per architect requirement suitable for waster and

22 MR 7 Providing and fixing PP/UPVC brass grating with

frame of approved design including setting in floor

with cement motor to match with floor finish as per

architect requirement.

23 MR 8 Providing and fixing PP/UPVC extention piece for 100

mm dia floor trap formed out of main pipe with multiple

side inlets, suitable for various dia pipes including all

fixtures as required complete as per drawing approved

sample and direction of engineer in charge. Each 31 2508.45 77,761.92

Digitally signed by PRIYA

PLUMBING WORKS DETAILED ESTIMATE

S.I DSR MR Description of Item Unit Total Qty MR DSR

No Item No Item No Rate Amount Rate Amount

24 MR 9 Providing and fixing cast PP floor clean out plug with

suitable insert keys for opening, male threaded joint

with threaded socket drip seal to soil / waste pipe as

required complete as per drawing approved sample

and direction of engineer in charge.

24.1 MR 9.1 Size 100 mm X 100 mm

25 MR 10 Providing and fixing rainwater khurra epoxy coated

cast iron body outlet with flat grate on balconies &

terrace as required complete as per drawing

approved sample and direction of engineer in

SUBHEAD III(Water Supply System(Internal))

26 18.8 Providing and fixing Chlorinated Polyvinyl Chloride

(CPVC) pipes, having thermal stability for hot & cold

water supply, including all CPVC plain & brass threaded

fittings and fixing the pipe with clamps at 1.00 m

spacing. This includes jointing of pipes & fittings with

one step CPVC solvent cement and the cost of cutting

chases and making good the same including testing of

joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making

good the walls etc(inside building)

26.5 MR 1.5 50 mm nominal dia Pipes Mtr 10 1074.25 10,742.50

27 18.7 Providing and fixing Chlorinated Polyvinyl Chloride

(CPVC) pipes, having thermal stability for hot & cold

water supply and all CPVC plain & brass threaded

fittings, including fixing the pipe with clamps at 1.00 m

spacing. This includes jointing of pipes & fittings with

one step CPVC solvent cement and testing of joints

complete as per direction of Engineer in Charge.

Internal work - Exposed on wall(vertical & terrace area)

27.1 18.7.2 20 mm nominal dia Pipes Mtr 25 345.6788 8,641.97

27.2 18.7.3 25 mm nominal dia Pipes Mtr 15 434.4112 6,516.17

27.5 MR 1.5 65 mm nominal dia Pipes Mtr 15 1925.1 28,876.50

27.6 MR 1.6 80 mm nominal dia Pipes Mtr 10 2490.9 24,909.00

28 18.18 Providing and fixing ball valve (brass) of approved

quality, High or low pressure, with plastic floats

28.1 18.18.1 complete

mm nominal dia Pipes Each RO 370.9322

28.2 18.18.2 20 mm nominal dia Pipes Each 7 422.6086 2,958.26

28.3 18.18.3 25 mm nominal dia Pipes Each 2 424.4162 848.83

29 18.17 Providing and fixing gun metal gate valve with C.I.

wheel of approved quality (screwed end) :

30 MR 5 Providing and fixing Butter fly valve with nitrile seat

and stainless steel stem with lever operation and

cast iron body in powder coated finish, suitable for

test pressure of 10Kg/sq.mm) with flanges, gaskets

and necessary pad locking arrangement complete

30.1 required.

Digitally signed by PRIYA

PLUMBING WORKS DETAILED ESTIMATE

S.I DSR MR Description of Item Unit Total Qty MR DSR

No Item No Item No Rate Amount Rate Amount

31 MR 6 Providing and fixing thermal insulation in cold/hot

water pipes a Polyolefin foam of closed cell structure

having thermal conductivity of 0.036 W/M.K at an

average temperature of 30oC. complete with 24

gauge aluminium sheet/cladding.

31.1 MR 6.1 15 mm dia pipe RM RO 45

31.6 MR 6.5 50 mm dia pipe RM RO 90

Digitally signed by PRIYA

PLUMBING WORKS DETAILED ESTIMATE

S.I DSR MR Description of Item Unit Total Qty MR DSR

No Item No Item No Rate Amount Rate Amount

SUBHEAD IV(External Sewerage & Storm Water Drainage)

32 MR 1 Excavation in trenches with straight or open cutting in

streets, lanes or in open area with 3D/JCB or excavator

including manually dressing bed, trimming sides and

side slopes for sewers and manholes to full depths as

shown in drawings,including, dressing to correct

sections and dewatering, provision for diversion for

traffic, protection of existing services i.e. telephone

cables, electric lines, water supply lines and gas lines

etc. night signals, profiles, pegs, sight rails, boning rods,

watching, etc., fixing and maintenance of caution

boards, fencing, refilling trenches, watering, ramming

and restoration of surface to original level and removal

of surplus spoil from the site of works, upto one chain

(15m) complete in all respects

32.1 MR 1.1 Depth not exceeding 3 m. BGL

All kinds of soil except rocky Mtr 150 224 33,600.00

33 MR 2 Excavation of trenches in a Streets, Lanes or in Open

Area for Storm Sewers and Manholes to Full Depths as

Shown in Drawings,excluding Shoring, Timbering of

Poling Board Frame System Type, dressing to correct

sections and dewatering, provision for diversion for

traffic, protection of existing services i.e. telephone

cables ,electric lines, water supply lines and gas

lines.night signals, profiles, Pegs, Sight rails, boning

rods, crossing over trenches for access to the houses,

watching, fencing etc., fixing and maintenance of

caution boards, refilling trenches, watering of refill in 15

cm layers, ramming and restoration of surface to

original conditions and removal of Surplus Spoil from

the Site of Works, for all Works other than connections

to Ventilating Shafts upto a Lead of 15 mtr

33.1 MR 2.1 For depth not exceeding 2 m. below Ground level

All classes of soil except rocky Mtr 150 224 33,600.00

Providing and laying non-pressure NP2 class (light duty)

R.C.C. pipes with collars jointed with stiff mixture of cement

mortar in the proportion of 1:2 (1 cement : 2 fine sand)

including testing of joints etc. complete :

35 19.1 Providing, laying and jointing glazed stoneware pipes

class SP-1 with stiff mixture of cement mortar in the

proportion of 1:1 (1 cement : 1 fine sand) including testing of

joints etc. complete :

36 19.7 Constructing brick masonry manhole in cement mortar

1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with

1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3

graded stone aggregate 20 mm nominal size), foundation

concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8

graded stone aggregate 40 mm nominal size), inside

plastering 12 mm thick with cement mortar 1:3 (1 cement :

3 coarse sand) finished with floating coat of neat cement

and making channels in cement concrete 1:2:4 (1 cement :

2 coarse sand : 4 graded stone aggregate 20 mm nominal

size) finished with a floating coat of neat cement complete

as per standard design :

36.1 19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover

with frame (light duty) 455x610 mm internal dimensions,

total weight of cover and frame to be not less than 38 kg

(weight of cover 23 kg and weight of frame 15 kg) :

36.2 19.7.1.2 With Sewer bricks conforming to IS : 4885 Each 16 12132.36 1,94,117.75

Digitally signed by PRIYA

PLUMBING WORKS DETAILED ESTIMATE

S.I DSR MR Description of Item Unit Total Qty MR DSR

No Item No Item No Rate Amount Rate Amount

Providing and fixing square-mouth S.W. gully trap class SP-

1 complete with C.I. grating brick masonry chamber with

water tight C.I. cover with frame of 300 x 300 mm size

(inside) the weight of cover to be not less than 4.50 kg and

frame to be not less than 2.70 kg as per standard design:

37.1 19.4.1 100x100 mm size P type

37.2 19.4.1.1 With common burnt clay F.P.S. (non modular) bricks of Each 8 2591.794 20,734.35

class designation 7.5

38 MR 7 Constructing catch basin 45x45 cm with bricks in

cement mortar 1:4 (1 cement : 4 coarse sand)

including 500x450 mm pre-cast R.C.C. horizontal

grating with frame complete as per standard design :

38.2 MR 7.1 With common burnt clay F.P.S. (non modular) bricks of

class designation 7.5 Each 6 4500 27,000.00

39 19.16 Providing orange colour safety foot rest of minimum 6 mm Each 48 498.6877 23,937.01

thick plastic encapsulated as per IS : 10910, on 12 mm dia

steel bar conforming to IS: 1786, having minimum cross

section as 23 mmx25 mm and over all minimum length 263

mm and width as 165 mm with minimum 112 mm space

between protruded legs having 2 mm tread on top surface

by ribbing or chequering besides necessary and adequate

anchoring projections on tail length on 138 mm as per

standard drawing and suitable to with stand the bend test

and chemical resistance test as per specifications and

having manufacture’s permanent identification mark to be

visible even after fixing, including fixing in manholes with

30x20x15 cm cement concrete block 1:3:6 (1 cement : 3

coarse sand : 6 graded stone aggregate 20 mm nominal

size) complete as per design.

Making connection of drain or sewer line with existing

manhole including breaking into and making good the walls,

floors with cement concrete 1:2:4 mix (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm nominal size)

cement plastered on both sides with cement mortar 1:3 (1

cement : 3 coarse sand), finished with a floating coat of neat

cement and making necessary channels for the drain etc.

40.1 19.21.1 For pipes 100 to 250 mm diameter Each 2 726.9782 1,453.96

SUBHEAD V(External Water Supply)

41 18.12 Providing and fixing G.I. pipes complete with G.I. fittings

including trenching and refilling etc.

42 18.40 Painting G.I. pipes and fittings with two coats of anti-

corrosive bitumastic paint of approved quality :

43 18.14 Fixing water meter and stop cock in G.I. pipe line including Each 1 712.5705 712.57

cutting and threading the pipe and making long screws etc.

complete (cost of water meter and stop cock to be paid

44 18.37 Constructing masonry Chamber 60x45x50 cm inside, in Each 1 9244.277 9,244.28

brick work in cement mortar 1:4 (1 cement : 4 coarse sand)

for water meter complete with C.I. double flap surface box

400x200x200 mm (inside) with locking arrangement and

RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3

graded stone aggregate 20 mm nominal size), including

necessary excavation, foundation concrete 1:5:10 ( 1

cement : 5 fine sand:10 graded stone aggregate 40 mm

nominal size) and inside plastering with cement mortar 1:3

(1 cement : 3 coarse sand) 12 mm thick, finished with a

floating coat of neat cement complete as per standard

Digitally signed by PRIYA

Name of Project : Welfare Building , Bokaro steel plant

SUBHEAD AMOUNT

1 SUBHEAD I:FIRE HYDRANT SYSTEM 3,44,605.96 62,964.00

Grand Total 4,07,569.96

Grand Total 4,07,569.96

Digitally signed by PRIYA

Name of Project : Welfare building,Bokaro Steel plant

Name of Work : FIRE FIGHTING WORK

S.I MR DSR 2022 DSR 2022 MR

Description of Item Unit Total Qty

No Item No Item No Rate Amount Rate Amount

SUBHEAD I:FIRE HYDRANT SYSTEM

Supplying, installation, testing and commissioning of electric

driven terrace pump suitable for automatic operation and

consisting of following, complete in all respects, as required:

Horizontal type, multistage, centrifugal, split casing pump of

cast iron body & bronze impeller with stainless steel shaft,

mechanical confirming to IS : 1520

Suitable HP squirell cage induction motor TEFC type suitable for

operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55

class of protection for enclosure, horiziontal foot mounted type

with Class-'F' insulation, conforming to IS-325

M.S.fabricated common base plate, coupling, coupling guard,

foundation bolts etc.as required.

Suitable cement concrete foundation duly plastered and with

anti vibration pads

Providing, laying, testing & commissioning of 'C' class heavy

duty MS pipe conforming to IS 3589/IS 1239 including Welding,

fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets

2 MR 2 18.7 etc. and fixing the pipe on the wall/ceiling with suitable

clamp/support frame and painting with two or more coats of

synthetic enamel paint

of required shade complete as required :

Supplying and fixing single headed internal hydrant valve with

instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia

3 MR 3 18.9 with cast iron wheel ISI marked conforming to IS 5290 (Type -A)

with blank Gunmetal/Stainless teel cap and chain as required

3.1 MR 3.1 18.9.1 Single Headed Gunmetal Each 3 8130 24389.9754

Supplying, fixing, testing and commissioning of butterfly valve

of PN 1.6 rating with bronze/gunmetal seat duly ISI conforming

to IS 13095 of following sizes as required :

Providing, installation, testing and commissioning of non-

return valve of following sizes confirming to IS: 5312 complete

with rubber gasket, GI bolts, nuts,washers etc.as required :.

Providing, installation, testing and commissioning of stainless

steel Y-strainer fabricated out of 1.6 mm thick stainless steel,

Grade 304, sheet with 3 mm dia

holes with stainless steel flange.

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with

63 mm dia male and female couplings duly bound with GI wire,

rivets etc. conforming to IS 636 (type-A) as required:

Digitally signed by PRIYA

S.I MR DSR 2022 DSR 2022 MR

Description of Item Unit Total Qty

No Item No Item No Rate Amount Rate Amount

Supplying and Fixing First Aid Hose Reel, wall mounting

swinging type complete with drum & bracket of MS

8 MR 8 18.17 construction, spray painted in Post office Red, confirming to IS

884/1995 with upto date amendments, complete with the

following as required.

20 mm nominal internal dia as per IS 12585 water hose

thermoplastic (Textile reinforced)Type II as per IS: 12585

20 mm dia. ball valve & nozzle.

Drum and brackets for fixing the equipments on wall.

Connection from riser with 25 mm dia gun metal stop valve and

M.S pipe as reqd.

Supplying & fixing 63 mm dia gun metal short branch pipe with

20 mm nominal internal diameter size nozzle conforming to IS

903 suitable for instantaneous connection to interconnect hose

pipe coupling as required:

Supplying and fixing orifice plate made out of 6 mm thick

stainless steel(Grade 304) with orifice of required size to be

fitted between flange &landing valve of external and internal

hydrants to reduce presure at the outlet to the level of 3.5

kg/sq.cm complete as required.

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick

MS sheet, 1200 mm in height with air release valve on top and

flanged connection to riser, drain arrangement with 25 mo dia

gun metal wheel valve with required accessories, pressure

gauge and painting with synthetic enamel paint of approved

shade as required. Each 1 19399 19398.8452

Providing and fixing standard fire man's axe with heavy duty

insulated rubber handle. Each 3 846.00 2538

Providing and fixing fire hose cabinet fabricated from 16 gauge

M.S. Sheet with single or double glazed front door (with 4 mm

13 MR 13 thick glass) and locking arrangement, painted fire red with

stove enamelled paint "FIRE HOSE" written on front including

necessary supports approximate size. 0

Providing and fixing dial type pressure gauge with isolation

cock and pipe at hydrant station. 0

14.1 MR 14.1 Diameter 100 mm calibration 0-8 Kg. Each 3 760.00 2280

Providing and fixing CO2 type fire extinguishers with steel

cylinder with a discharge valve and conforming to IS:15683.

15 MR 15 Extinguishers shall be painted with rex enamel paint and fixed

to wall with brackets capacity 4.5 Kg.

Providing and fixing ABC powder type fire extinguisher

suitable for inverted operation and fabricated from 1.6 mm

M.S. sheet internally protected with anticorrosive treatment

and hydraulically tested to a pressure of 25 Kg/Sqcm.

16 MR 16 Extinguishers externally painted with red enamel and fixed to

wall with brackets complete with internal charge and spanner

(Conforming to IS:15683 capaicity 6 KG.).

Digitally signed by PRIYA

PROJECT : BILL OF QUANTITY FOR HVAC WORK FOR WELFARE BUILDING, BOKARO AT JHARKHAND

SUMMARY OF PRICES AMOUNT

1 PART A VRF EQUIPMENT Rs. 3276500

TOTAL OF ALL ABOVE Rs. 3276500

BILL OF QUANTITIES

S.No Description Unit Qty. Rate (Rs.)

PART A VRF EQUIPMENT

1 DX TYPE SPLIT UNIT WITH 3 STAR RATING WITH

Supply , installation, testing & Commissioning of DX type

split AC units with air cooled condenser mounted in outdoor

unit complete with scroll/rotary compressor ,condensor

,wiring & accessories . Indoor units shall be wall mounted

type complete with evaporator ,fan, filter ,drier, expansion

devices & microprocessor control panel along with all

accessories with refrigerant & oil charge , cordless remote

controls. The unit shall be suitable for working 50 cycle

/second ,1 phase AC supply .The unit shall be designed to

take care of veritcal head 4mt & horizontal length of 15mt &

necessary oil seprator shall be included ,Necessary

supporting arrangement for both indoor & outdoor units (

Powder Coated /Epoxy painted MS stand for ODU units as

per approved make shade by Architect) with necessary

vibration isolation arrangement as per site condition etc.(

without condensate drain pipe ,electrical pipe ,electrical

power & control cabling between indoor & outdoor unit which

shall be paid seprately ). The Color of the outdoor units to be

finalized by the Architect as per building Architectural

i All Unit shall be Minimum 3 Star Rating Based

ii The Outdoor unit Compressor must be provided with 5 Year

Warranty Period.

iii Civil Work such as wall hole making , wall chiseling, refilling

of chiseling part with mortar etc as per site condition.

iv Nitrogen pressure testing for leakages & flushing during

installation & after commissioning between IDU & ODU with

v Removable Covers for all indoor & Outdoor units shall be

supplied & put on the units after installation &

vi Incoming power supply shall be provided near each indoor

vii Sound level of Outdoor unit shall be 70 Db at 1 Mt Distance

Includng MS stand for outdoor units ,control and power

Digitally signed by PRIYA

S.No Description Unit Qty. Rate (Rs.)

Below All outdoor units to be provided with blue fin / UV

coating . No extra price shall be paid for the same .

a) 2.0 TR Split Units Nos 25 55000 1375000

b) 1.5 TR Split Units Nos 21 45000 945000

Insulated Refrigerant piping for above split unit 2.0TR RMT 375 850 318750

Insulated Refrigerant piping for above split unit 1.5 TR RMT 315 750 236250

Total of Part A carried to Summary of Prices.

Supply, installation, testing and commissioning of uPVC 10

Kg/Sq.cm drain water piping complete with

fittings,connection bush, support as per specification and

insulated with 6 mm thick closed cell elastomeric nitile

rubber insulation including the cost of cutting & filling chases

in wall/floor, repairing using wire mesh & making good with

ii 32 mm dia O.D RMT 350 170 59500

3 POWER CUM CONTROL CABLING

Supply and laying ,testing & commissioning of following sizes

of sheilded Copper conductor control cables Sq. mm in

PVC conduit with including fixing clamps & effecting proper

connections to equipment etc. complete as required .

3.10 3C X 2.5 Sq.mm shielded cable RMT 1400 180 252000

Total of Part E carried to Summary of Prices. 3276500

Digitally signed by PRIYA

Sl. No I.No. Description of Item Unit Quantity Rate (Rs) Amount(Rs)

Providing and laying at or near ground level factory made kerb stone of M-25

grade cement concrete in position to the required line, level and curvature,

jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making

joints with or without grooves (thickness of joints except at sharp curve shall

not to more than 5mm), including making drainage opening wherever required

complete etc. as per direction of Engineer-in-charge (length of finished kerb

edging shall be measured for payment). (Precast C.C. kerb stone shall be

approved by Engineer-in-charge). 9158.79

16.68 Providing and laying 60mm thick factory made cement concrete interlocking

paver block of M -30 grade made by block making machine with strong

vibratory compaction, of approved size, design & shape, laid in required colour

One Square Metre 269.28 2,72,295.00

and pattern over and including 50mm thick compacted bed of coarse sand,

filling the joints with fine sand etc. all complete as per the direction of Engineer-

in-charge. 1011.20

Construction of dry lean cement concrete sub base over a prepared sub-grade

with coarse and fine aggregate conforming to IS:383, the size of coarse

aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1,

aggregate gradation after blending to be as per specifications, cement content

16.80 not to be less than 150 Kg/cum, optimum moisture content to be determined CUM 105.91 4,65,147.00

during trial length construction, concrete strength not to be less than 10 Mpa

at 7 days, mixed in a batching plant, transported to site, for all leads & lifts, laid

with a mechanical paver, compacting with 8-10 tonne vibratory roller, finishing

and curing etc. complete as per direction of Engineer-in-charge. 4392.01

Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi

tracks/ runways, using cement content as per design mix, using coarse sand

and graded stone aggregate of 40 mm nominal size in appropriate proportions

as per approved & specified design criteria, providing dowel bars with sleeve/

tie bars wherever required, laying at site, spreading and compacting

mechanically by using needle and surface vibrators, levelling to required slope/

camber,finishing with required texture, including steel form work with sturdy

M.S. channel sections, curing, making provision for contraction/ expansion,

construction & longitudinal joints (10 mm wide x 50 mm deep) by groove

cutting machine, providing and filling joints with approved joint filler and

sealants, complete all as per direction of Engineer-in-charge (Item of joint

fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). 0.00

Note: Cement content considered in M-30 is @ 340Kg/Cum. Excess/Less

cement used as per design mix is payable, recoverable separately. 0.00

16.43.1 Cement concrete prepared with batch mixing machine. CUM 176.51 10109.43 17,84,441.00

1:3:6 (1 Cement : 3 coarse sand(zone-III) derived from natural sources : 6

graded stone aggregate 20 mm nominal size derived from natural sources).

Supplying and filling in plinth with sand under floors, including watering,

ramming, consolidating and dressing complete. 2298.00

Total for Road Works 32,70,026.00

Non Schedule Items- Conference Room Furniture

MR Mingle 16 seater Conference Table Each 1 266769.92 2,66,769.92

MR Beat High Back Chair Each 16 21,958.97 3,51,343.58

Total for Furniture of conference room 6,18,113.50

Digitally signed by PRIYA

Sl. No Item No. Description of Item Unit Quantity Rate (Rs) Amount(Rs)

Providing and stacking of Clerodendrum inerme having ht. 25 cm to 30 cm

multi branched in 15 cm size of Earthen Pot / Plastic Pot & as per direction of

1 6.7 the officer-in-charge. Each 2000 21.27 42532

Providing & laying Selection no. 1 doob grass turf with earth 50mm to 60mm

thickness of existing ground prepared with proper level and ramming with

required tools wooden and than rolling the surface with light roller make the

surface smoothen and light watering the same maintenance for 30 days or

2 2.34 more till the grass establish properly,as per direction of officer in charge Sqm 500 93.04 46519.375

Supplying & Stacking of Selection No.1 doob grass turf at site fresh & free from

weeds having proper roots in green including loading, unloading, carriage and

3 2.35 all taxes paid etc.and as per direction of officer in charge. Sqm 500 54.02 27007.82

Digitally signed by PRIYA