Construction of 1 BHK for Security Guards in Sericulture Department Jammu.

Amount

Excavation work by mechanical means (Hydraulic Excavator) manual means in foundation trenches of drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soils as directed with in a lead of 50 m

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Providing, diluting and injecting chemical emulsion for anti ternite treatment as per IS: 6313 and creating a continous chemical barrier under and around the clumn pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, surrouding of pipes and coduits, over the top surface of consilidated earth, etc complete (plinth area of the building at ground floor only shall be measured for the payment) using chlorpyriphos EC 20 % with 1% concentration @ 7.5 L/sqm for vertical surface & 5 L/sqm on horizontal surface

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 cement 4 coarse sand 8 graded stone aggregate 40 mm nominal size) crushed including all carriage

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Crushed including all carriage

Providing and laying DPC 40mm thick with cement concrete in 1:2:4 (1 cement 2 coarse sand 4 graded stone aggregate 12.5 mm nominal size) Crushed including all carriage

Applying a coat of residual petroleum bitumen of Grade VG- 10 of approved quality using 1.}kg per square metre on damp-proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers abutments, pillars, posts, struts, butteresses, string or laces, courses, parapets, coping, bed blocks, anchor blocks, plain window sills,sunken floors fillets etc. upto floor five level, excluding the cost of centring, shuttering and finishing: 1:1.5:3(1 cement: 1.5 coarse sand :3 graded stone aggregate 20mm nominal size) Crushed including all carriage

Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete

Centring and shuttermg including strutting, propping etc. and removal of form for·

Lintels, beams, plinth beams, girders, bressumers and centilevers

Suspended floors, roofs, landings, balconies and access platform

Edges of slabs and breaks in floors and walls Under 20cms wide

Brick work with FPS bricks of class cement mortar 1:6 (1 cement 6 coarse sand) designation 75 in Super Structure (length of wall = 144') including all carriage

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement: 3 fine sand) including all carriage

15 mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 fine sand) including all carriage

12 mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) including all carriage

Providing and applying white cement based putty ofaverage thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface Water thinable Cement primer

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed, consolidated and grouted with fine sand including finishing the top smooth including all carriage

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 60x60cm including all carriage

Providing and fixing aluminium work for doors, windows, ventilators and partitions for fixed portion. Powder coated aluminium (14 guage) complete fitting (including glass fixing)

Wiring for light point/fan point/exhaust fan point/ call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with Modular switch, modular plate, suitable GI Box and earthing the point with 1.5 sqmm FRLs PVC insulated copper conductor single core cable etc as required (ISI)

Wiring for light / power plug with 2 x 4 sqmm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit long with 1 no. 4.00 sqmm FRLs PVC insulated copper conductor single core cable for loop earhting (ISI)

Wiring for Circuit/ Submain wiring along with earthiwire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit as required (ISI)

2 x 2.5 sqmm + 1 x 2.5 sqmm earthwire

2 x 6.00 sqmm + 1 x 6.00 sqmm earthwire

Supplying and fixing of brass batten/ angle holder including connections etc as required (ISI)

Supplying and fixing suitable GI Box with (1.32) modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 and 15/6 A modular socket outlet and 15/16 A modular switch connections etc as required (ISI)

Supplying and fixing suitable GI Box with (1.31) modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 15/16 A modular switch connections etc as required (ISI)

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate, switch box including connections but excluding modular plate etc as required (ISI)

Supplying and fixing 5 A to 32 A rating, 240/415V 10 KA 'C' curve, miniautre circuit breaker, suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioing etc as required (ISI)

Single pole

Double pole (32 A)

Supplying, installation, testing and commissioning of ceiling fan 1200 mm including wiring the down rods of standard length (upto 30 cm) with 1.5 sq mm FRLS PVC insulated copper conductor single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc (Make: Standard Havells/ Crompton Greeves/ Usha)

Supplying, installation, testing and commissioning of wall fan 400 mm sweep (Make: Standard Havells / Crompton Greeves/ Usha)

Supplying and fixing following way, single pole and neutral sheet, MCB distribution board, 240 V on surface/recess, complete with finned copper bus bar neutral busbar earth bar, inter connections powder coated including earthing etc as required (ISI) 12 way double door

SITC of 7 wall LED bulb on existing angle holder including PVC round sheets (Make: Panasonic/ Havells / Syska)

SITC of fire extenguisher ABC dry powder 6 kg (Make: Savemax / Lifeguard / Carefree)

Installation, tesing and commissioning of pre wired flourescent feeling / compact flourescent filling of all types complete with all accessories and tubes etc directly on ceiling /wall including connections with 1.5 sqmm FRLS PVC insulated copper conductor single core cable and earthing etc as required LED light 4' long 18 watt (Make: Havells/ Jaquar/ Greatwhite)

Providing and fixing Chlorinated Poly vinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings 1/C fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. (Concealed work including cutting chases and making good the walls etc.)

15mm nominal outer dia pipes.

20mm nominal outer dia pipes.

Providing and fixing Chlorinated Poly vinyl Chloride (CPVC) pipes havmg thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this included jointing of pipe and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in-charge. (External work)

20mm nominal outer dia pipes.

25mm nominal outer dia pipes.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license] C.P. BRASS FITTINGS

Providing and laying PVC pipes with all fittings including laying in position cement concrete 1:3:6 for fixing PVC pipes complete job

75 mm dia

110 mm dia

Providing and fixing PVC rain water pipes including all fittings complete job 110 mm dia

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) R.C.C. top slab with 1:2:4 mix ( 1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 ( 1cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finsihed with a floating coat of neat cement complete as per standard design inside size 60 x60 cm and 45 cm deep including CI cover with frame complete job

Making soak pit 2.5 m diameter 3.0 metre deep with 45x45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design With F.P.S. bricks

Providing and fixing PVC floor trap complete job

Providing and fixing of following CP fittings complete job

CP bras bib cock

CP brass angle valve

Towel Ring

Soap dish holder

Providing and fixing white vitreous china pedestal type water closet ( European type) with seat and lid , 10 litre low level white vitreous china flushing cistern and CP flush with fittings, C.I./M.S. brackets 40mm bend diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipaldesign complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with lSI marked white solid plastic seat and lid. with white vitreous china flushing cistern & C. P. flush bend

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x41 Ox265mm sizes respectively.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length

Providing and fixing of looking mirror of size 450mm x 600mm

Providing and fixing kitchen sink with C. I. brackets, C.P brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required. White glazed fire clay kitchen sink of size 600x450x250 mm

Supply and fixing of Gyser including complete job (Make: Crompton Greeves/ Havells or equivalent)

Providing and fixing of MS Stair

Dismentaling old existing building by Mechanical means including stacking of serviceable material to the designated site as per Engineer-in-charge. Removal of mulba of existing dismantalled bulding from site to disposal Zone at a distance of 10 kms. (complete job)

M/S RAINA CONSTRUCTIONS

MANIK SHARMA

Avinash Sharma

KUNAL SHARMA