Sub Work Providing Run of mains to HVAC Pumps, Intermediate MCB switches and Heat Strip to HOTs AHU in Tower Block Building at Government Rajaji Hospital (GRH) in Madurai District

Amount

supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 300 mm down rod with fan clamp with side plates and cross arm of size 450mm (18").

Supply and clamping of 3C x10 sq.mm. CU LTUG PVC armoured cable (Havells / Eq) on post or on wall with MS clamps.(Pump Panel to HVAC Primary pump and Condensor pump )

Supply and clamping of 3C x 16 sq.mm. CU LTUG armoured cable (Havells / Eq) on post or on wall with MS clamps. (Pump Panel to HVAC Secondary pump )

Supply and clamping of 3C x6 sq.mm. CU LTUG armoured cable (Havells / Eq) on post or on wall with MS clamps. (Pump Panel to HVAC Cooling Tower and Name Board)

Supply and clamping of 16C x2.5 sq.mm. Cu unarmoured LTUG cable (Havells / Eq) on post or on wall with MS clamps. (Transformers RTCC Panel to OLTC)

Supply and clamping of 10C x2.5 sq.mm. Cu unarmoured LTUG cable (Havells / Eq) on post or on wall with MS clamps. (HT VCB Panel to Transformers)

Supply and clamping of 12C x2.5 sq.mm. CU LTUG armoured cable (Havells / Eq) on post or on wall with MS clamps. (DG to PCC and PCC to DG Control panel terminal)

Supply and clamping of 6C x2.5 sq.mm. CU LTUG armoured cable (Havells / Eq) on post or on wall with MS clamps. (MV Panel to DG AMF Panel)

Supply and clamping of 4C x2.5 sq.mm. CU LTUG armured cable (Havells / Eq) on post or on wall with MS clamps.(DG Batteries to AMF Panel and DG PCC panel to LTA pump etc)

Supply and clamping of4C x4 sq.mm. Cu unarmoured LTUG cable (Havells / Eq) on post or on wall with MS clamps. (HT VCB panel to MV panel ,RTCC panels to Transformers ,APFC Panel to MV Panel and DG AMF panel to MV panel)

Supply and clamping of 3C x2.5sq.mm Cu unarmoured LTUG cable (Havells / Eq) on post or on wall with MS clamps. (DG Conopy Lighting)

Supply and clamping of 3C x4sq.mm. Cu unarmoured LTUG cable (Havells / Eq) on post or on wall with MS clamps. (STP and ETP Pump from panel)

Supply and clamping of 3C x1.5sq.mm. CU unarmoured LTUG cable (Havells / Eq) on post or on wall with MS clamps. (AHU to MOT Thermostat)

Supply and clamping of 4C x1sq.mm. CU LTUG cable (Havells / Eq) on post or on wall with MS clamps. (STP penel to motor starter and Fire pump to fire pump panel)

Supply and clamping of 3-1/2 x 400 sq.mm. PVC LTUG armoured aluminium cable on post or on wall with MS clamps. (For HOT )

Supply & fixing of 40A 4P Isolator in sheet steel enclosure box on wall with connection complete (Higher End) (For AHU and Compressor)

Supply & fixing of 63A 4P MCCB in 4P sheet steel enclosure box on wall with connection complete (Higher End)(For 10KVA UPS)

Supply & fixing of 160A 4P MCCB in sheet steel enclosure box on wall with connection complete. (Higher End)(For 80KVA UPS

Supply & fixing of 400A 4P MCCB in sheet steel enclosure box on wall with connection complete. (Higher End) (OT panel UPS)

Supply & fixing of 800A TPN switch disconnector fuse unit with HRC fuses double break in sheet steel enclosure with top and bottom cable gland box with door interlock and pad lock facility with necessary earth connection complete. (LK / Eq) (HVAC Punp Panel)

Supply and fixing of 25KW Strip Heater-(2.5kw X 2Nos X 5 sets)which is accommodating in Double Skin Thermal Break Plenum box (1200mm X1400mm X800mm)with minimum 0.6mm thick inner and outer ,with 50mm thick PUF sandwiched type.And the Thyristor based heater control with suitable switch gear and PID controller was palced externally to control the stripheater with connnction complete.

Supply and fixing of Eletromagnetic BTU Meter in chilled pipe line.The BTU meter Specfication as follows : Instrument :Electromagnetic BTU Meter Make :PRIDE Model :PRI-MAG6000T Model Code :PRI-MAG-C-P-S-C-T1-A-1-A-1-W-DN200 Line Size :DN200(8 Inch) Media :Chilled Water Standard Flow Rate :99.50–5970.28 GPM Process Flow Rate :1196 GPM Process Temperature :7oC Conductivity :More than 50 Micro Siemens Accuracy :±0.5% Display :Digital LCD Display Mounting :Integral Linear :Hard Rubber Meter Content :Current &Total Flow Meter Mounting :Horizontal& Vertical Electrode Material :SS316L Flow Tube :SS304

Body Material :Carbon Steel Power Supply :230 VAC CommunicationInterface:RS485MODBUS End connection :Flanged End Temperature Sensor :PT100 Input1 :From Flow meter Input2 :Temperature Sensor1&2 TransmitterProtection:IP65 Sensor Protection :IP 66

Supply, erection, testing and commissioning of 250mm GI „C‟ Class Heavy Duty Pipe as per IS 1239 GI PIPE ERW AS PER IS 3589 IN 5.0MM THK is a high-quality galvanized iron pipe to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like GI flange of table „E‟, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat ofEnamel painting including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the Departmental Officers.

P AND C PROJECTS PRIVATE LIMITED (BID ID -1277705)

PSK ENGINEERING CONSTRUCTION AND CO (BID ID -1277505)